Catalytic reductive alkylation of secondary amine with aldehyde and silane by an iridium compound

[reaction: see text] An efficient methodology for the reductive alkylation of secondary amine with aldehyde and Et(3)SiH using an iridium complex as a catalyst has been developed. For example, treatment of dibutylamine with butyraldehyde and Et(3)SiH (a 1:1:1 molar amount of amine, aldehyde, and silane) in 1,4-dioxane at 75 degrees C under the influence of a catalytic amount of [IrCl(cod)](2) gave tributylamine in quantitative yield. In this reaction, no reduction of aldehyde took place. It was found that IrCl(3), which is a starting material for preparation of iridium complexes such as [IrCl(cod)](2), acts as an efficient catalyst for the present reductive alkylation of amine. In addition, a cheaper, easy-to-handle, and environmentally friendly reducing reagent such as polymethylhydrosiloxane (PMHS) in place of Et(3)SiH was also useful. Thus, a variety of secondary amines could be alkylated by allowing them to react with aldehydes and PMHS in the presence of an iridium catalyst to afford the corresponding tertiary amines in good to excellent yields. From the deuterium label experiments, it was revealed that silane and water, generated during the formation of enamine by the reaction of amine and aldehyde, seem to behave as a hydrogen source. The catalytic cycle was discussed.     

Catalytic performance of symmetrical and unsymmetrical sulfur-containing pincer complexes: synthesis and tandem catalytic activity of the first PCS-pincer palladium complex

The synthesis and catalytic applications of a new aryl-based unsymmetrical PCS-pincer complex are reported. Preparation of the robust air- and moisture-stable PCS-pincer palladium complex 5[X] started from the symmetrical alpha,alpha'-dibromo-meta-xylene and involved the selective substitution of one bromide by PPh(2)(BH(3)), followed by substitution of the second bromide by SPh and subsequent introduction of the palladium. The new PCS complexes (5[X]) were employed as catalysts in two important organic transformations. Firstly, complex 5[Cl] displays high catalytic activity in aldol reactions but enters the catalytic cycle as a precatalyst. Secondly, complex 5[BF(4)] displays tandem catalytic activity in the coupling of allyl chlorides with aldehydes and imines in the presence of hexamethylditin. In these tandem catalytic reactions the first process is the conversion of allyl chlorides into trimethylallyltin (and trimethyltin chloride) with Sn(2)Me(6), which is followed by catalytic allylation of aldehyde and sulfonimine substrates. In addition, we present a new catalytic process for the one-pot allylation of 4-nitrobenzaldehyde with vinyloxirane. The catalytic performance of the novel PCS-pincer palladium complex was compared to those of its symmetrical PCP- and SCS-pincer complex analogues. It was concluded that the unsymmetrical PCS complex advantageously unifies the attractive catalytic features of the corresponding symmetrical pincer complexes including both (pi-) electron-withdrawing (such as phosphorus) or (sigma-) electron-donating (such as sulfur and nitrogen) heteroatoms. Thus, in the aldol reaction the PCS-pincer palladium complex 5[X] provides a high turnover frequency, while in the tandem process both reactions are catalysed with sufficiently high activity.     

Palladium(II) complexes of aliphatic amines and their oxidation by chloramine‐T in perchloric acid medium

The formation of palladium(II) complexes with aliphatic amines and their oxidation by chloramine‐T in perchloric acid medium has been studied. The spectrophotometric studies showed the formation of 1:1 and 1:2 complexes between palladium(II) and amine in absence of HClO₄. An increase in [HClO₄] in reaction mixture suppresses the complex formation and in presence of [HClO₄] ～10^?3 mol dm^?3 only a 1:1 complex between palladium(II) and amine has been observed. The effect of Cl^? on the complex formation has also been studied. Palladium(II)‐catalyzed oxidation of these amines by chloramine‐T showed a first‐order dependence of rate with respect to each—oxidant, substrate, catalyst, and H⁺. The mechanism consistent with kinetic data for the oxidation process has been proposed in absence as well as in presence of initial [Cl^?]. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 603–612, 2002     

Enantioselective borohydride reduction catalyzed by optically active cobalt complexes

The highly enantioselective borohydride reduction of aromatic ketones or imines to the corresponding alcohols was developed in the presence of a catalytic amount of an optically active cobalt(II) complex catalyst. This enantioselective reduction is carried out using a precisely premodified borohydride with alcohols such as tetrahydrofurfuryl alcohol, ethanol and methanol. High optical yields are obtained by choosing the appropriate alcohol as modifiers and a suitable beta-ketoiminato ligand of the catalyst. The enantioselective borohydride reduction has been successfully applied to the preparation of optically active 1,3-diols, the stereoselective reduction of diacylferrocenes, and dynamic and/or kinetic resolution of 1,3-dicarbonyl compounds.     

A Metalloenzyme‐Like Catalytic System for the Chemoselective Oxidative Cross‐Coupling of Primary Amines to Imines under Ambient Conditions

The direct oxidative cross‐coupling of primary amines is a challenging transformation as homocoupling is usually preferred. We report herein the chemoselective preparation of cross‐coupled imines through the synergistic combination of low loadings of Cu^II metal‐catalyst and o‐iminoquinone organocatalyst under ambient conditions. This homogeneous cooperative catalytic system has been inspired by the reaction of copper amine oxidases, a family of metalloenzymes with quinone organic cofactors that mediate the selective oxidation of primary amines to aldehydes. After optimization, the desired cross‐coupled imines are obtained in high yields with broad substrate scope through a transamination process that leads to the homocoupled imine intermediate, followed by dynamic transimination. The ability to carry out the reactions at room temperature and with ambient air, rather than molecular oxygen as the oxidant, and equimolar amounts of each coupling partner is particularly attractive from an environmentally viewpoint.     

Pt-Sn/γ-Al2O3-catalyzed highly efficient direct synthesis of secondary and tertiary amines and imines

Versatile syntheses of secondary and tertiary amines by highly efficient direct N‐alkylation of primary and secondary amines with alcohols or by deaminative self‐coupling of primary amines have been successfully realized by means of a heterogeneous bimetallic Pt–Sn/γ‐Al₂O₃ catalyst (0.5 wt % Pt, Pt/Sn molar ratio=1:3) through a borrowing‐hydrogen strategy. In the presence of oxygen, imines were also efficiently prepared from the tandem reactions of amines with alcohols or between two primary amines. The proposed mechanism reveals that an alcohol or amine substrate is initially dehydrogenated to an aldehyde/ketone or NH‐imine with concomitant formation of a [PtSn] hydride. Condensation of the aldehyde/ketone species or deamination of the NH‐imine intermediate with another molecule of amine forms an N‐substituted imine which is then reduced to a new amine product by the in‐situ generated [PtSn] hydride under a nitrogen atmosphere or remains unchanged as the final product under an oxygen atmosphere. The Pt–Sn/γ‐Al₂O₃ catalyst can be easily recycled without Pt metal leaching and has exhibited very high catalytic activity toward a wide range of amine and alcohol substrates, which suggests potential for application in the direct production of secondary and tertiary amines and N‐substituted imines.     

Palladium nanoparticles in aqueous solution: Preparation,properties, and effect of their size on catalytic activity

A method has been developed for the preparation of palladium nanoparticles with different sizes of up to 7 nm via the reduction of Pd(II) ions with hydrogen in an aqueous solution on seed metal nanoparticles (2.5 nm). The effect of the size of nanoparticles on their catalytic activity in methyl viologen reduction with molecular hydrogen in an alkaline medium has been studied. It has been found that the specific catalytic activity of palladium nanoparticles is independent of their size.     

Organocatalyzed anodic oxidation of aldehydes

A method for the catalytic formation of electroauxiliaries and subsequent anodic oxidation has been developed. The process interfaces N-heterocyclic carbene-based organocatalysis with electro-organic synthesis to achieve direct oxidation of catalytically generated electroactive intermediates. We demonstrate the applicability of this method as a one-pot conversion of aldehydes to esters for a broad range of aldehyde and alcohol substrates. Furthermore, the anodic oxidation reactions are very clean, producing only H(2) gas as a result of cathodic reduction.     

Oxidic or metallic palladium: which is the active phase in pd-catalyzed aerobic alcohol oxidation?

In situ X-ray absorption spectroscopy combined with on-line catalytic measurements using FT-IR spectroscopy unequivocally identified that metallic palladium is the more active phase in the aerobic oxidation of benzyl alcohol than palladium oxide. The aerobic oxidation of benzyl alcohol in cyclohexane at 50 degrees C was low over oxidized 0.5%Pd/Al2O3 and 5%Pd/Al2O3 catalysts. XANES and EXAFS showed that the catalysts in the as-received state were almost fully oxidized and no reduction of the palladium constituent was observed during time-on-stream. After in situ reduction by hydrogen-saturated cyclohexane, the catalysts were much more active (over 50 times) than before reduction. Both XANES and EXAFS uncovered that the palladium constituent was mainly in a reduced state under these conditions of high catalytic activity. This demonstrates that metallic palladium is the active phase for alcohol dehydrogenation.     

Polycrystalline and monocrystalline antimony, iridium and palladium as electrode material for pH-sensing electrodes

Different ways of making pH-sensing electrodes from monocrystalline or polycrystalline antimony, iridium and palladium have been investigated. Monocrystalline antimony and iridium are superior to the polycrystalline elements with respect to reproducibility between electrodes and stability of the electrode potential over long periods of time. No good palladium/palladium oxide electrode could be obtained by electrochemical oxidation and the thermal preparation method could not take advantage of the properties of the monocrystalline palladium. Therefore, only polycrystalline palladium was used to study this type of electrodes. The different electrodes were compared with respect to the manner of preparation, the pH-response (reproducibility and time response) and the effect that different complexing ligands present in the measuring solutions may have on the electrode response. Also, the redox-response of the electrodes and the effect of different oxygen pressures on the electrode potentials were studied. The monocrystalline antimony electrodes have the best reproducibility and long-term stability but also respond to complexing ligands and to variations in the oxygen pressure. Monocrystalline iridium electrodes can be obtained by continuously cycling the potential between -0.25 and +1.25 V (SCE) in 0.5M sulphuric acid. They do not respond to the complexing ligands tested, and have fairly good long-term stability, but the reproducibility between electrodes is inferior to that of the monocrystalline antimony electrodes. Polycrystalline antimony and iridium electrodes were inferior to the monocrystalline ones. The properties of the palladium electrodes were similar to those of the iridium ones.     

One-Pot Direct Oxidation of Primary Amines to Carboxylic Acids through Tandem ortho-Naphthoquinone-Catalyzed and TBHP-Promoted Oxidation Sequence

Biomimetic oxidation of primary amines to carboxylic acids has been developed where the copper-containing amine oxidase (CuAO)-like o-NQ-catalyzed aerobic oxidation was combined with the aldehyde dehydrogenase (ALDH)-like TBHP-mediated imine oxidation protocol. Notably, the current tandem oxidation strategy provides a new mechanistic insight into the imine intermediate and the seemingly simple TBHP-mediated oxidation pathways of imines. The developed metal-free amine oxidation protocol allows the use of molecular oxygen and TBHP, safe forms of oxidant that may appeal to the industrial application.     

Heteropolymolybdate as a New Reaction-controlled Phase-transfer Catalyst for Efficient Alcohol Oxidation with Hydrogen Peroxide

Aldehydes are very important raw materials or intermediates, which have widespread applications in the perfumery, pharmaceutical, dyestuff and agrochemical industries1. Oxidation of alcohol is one of the most frequently used synthetic reactions in the lab…     

Preparation of functionalized primary chiral amines and amides via an enantioselective three-component synthesis of propargylamines

A general preparation of functionalized primary chiral amines and amides from propargylamines has been developed. The chirality is established by an enantioselective three-component reaction of an aldehyde, a terminal alkyne and a secondary amine in the presence of copper(I) bromide/Quinap as the catalytic system leading to chiral propargylamines in high yields and enantioselectivities. Functionalization and reduction leads to various primary amines and amides.     

Mechanistic characterization of aerobic alcohol oxidation catalyzed by Pd(OAc)(2)/pyridine including identification of the catalyst resting state and the origin of nonlinear [catalyst] dependence

The Pd(OAc)(2)/pyridine catalyst system is one of the most convenient and versatile catalyst systems for selective aerobic oxidation of organic substrates. This report describes the catalytic mechanism of Pd(OAc)(2)/pyridine-mediated oxidation of benzyl alcohol, which has been studied by gas-uptake kinetic methods and (1)H NMR spectroscopy. The data reveal that turnover-limiting substrate oxidation by palladium(II) proceeds by a four-step pathway involving (1) formation of an adduct between the alcohol substrate and the square-planar palladium(II) complex, (2) proton-coupled ligand substitution to generate a palladium-alkoxide species, (3) reversible dissociation of pyridine from palladium(II) to create a three-coordinate intermediate, and (4) irreversible beta-hydride elimination to produce benzaldehyde. The catalyst resting state, characterized by (1)H NMR spectroscopy, consists of an equilibrium mixture of (py)(2)Pd(OAc)(2), 1, and the alcohol adduct of this complex, 1xRCH(2)OH. These in situ spectroscopic data provide direct support for the mechanism proposed from kinetic studies. The catalyst displays higher turnover frequency at lower catalyst loading, as revealed by a nonlinear dependence of the rate on [catalyst]. This phenomenon arises from a competition between forward and reverse reaction steps that exhibit unimolecular and bimolecular dependences on [catalyst]. Finally, overoxidation of benzyl alcohol to benzoic acid, even at low levels, contributes to catalyst deactivation by formation of a less active palladium benzoate complex.     

Retracted: Synthesis of 2-Arylisoindoline Derivatives Catalyzed by Reusable 1,2,4-Triazole Iridium on Mesoporous Silica through a Cascade Borrowing Hydrogen Strategy

Covalent attachment of a 1,2,4-triazole iridium complex to mesoporous MCM-41 generated a heterogeneous catalyst that was found to be effective in the synthesis of 2-aryl isoindolines, quinolines, cyclic amines, and symmetrical secondary amines through a cascade borrowing hydrogen strategy. Interestingly, the supported heterogeneous iridium catalyst prepared from the 1,2,4-triazole iridium complex and mesoporous MCM-41 exhibited high catalytic activity in the preparation of 2-aryl isoindoline derivatives and symmetrical secondary amines. The catalyst system is highly recyclable for at least five times. Besides the important effect of the triazole, iridium sites grafted on siliceous supports can act as multifunctional catalytic centers and thus greatly enhance the catalytic activity of the catalysts. Furthermore, mechanistic experiments revealed that the reaction is initiated by an initial alcohol dehydrogenation and promoted by an iridium hydride intermediate. Importantly, the direct detection of a diagnostic iridium hydride signal confirmed that the synthesis of 2-aryl isoindolines occurs by a borrowing hydrogen process. This work provides an efficient example of isoindolines synthesis through a borrowing hydrogen strategy.     

Iridium-catalyzed reduction of secondary amides to secondary amines and imines by diethylsilane

Catalytic reduction of secondary amides to imines and secondary amines has been achieved using readily available iridium catalysts such as [Ir(COE)(2)Cl](2) with diethylsilane as reductant. The stepwise reduction to secondary amine proceeds through an imine intermediate that can be isolated when only 2 equiv of silane is used. This system requires low catalyst loading and shows high efficiency (up to 1000 turnovers at room temperature with 99% conversion have been attained) and an appreciable level of functional group tolerance.     

Catalytic Oxidation of Iron(II) Aqua Complex by Oxygen in the Presence of Palladium(II) Tetraaqua Complex

The catalytic oxidation of iron(II) with oxygen occurs along with an autocatalytic reaction between palladium(II) tetraaqua complex and iron(II) aqua complex in an oxygen atmosphere. The reaction is catalyzed by a compound of palladium in an intermediate oxidation state, presumably by a small palladium cluster formed in the course of the reduction of palladium(II) tetraaqua complex with iron(II) aqua complex.     

Catalytic Enantioselective Reaction of α‐Phenylthioacetonitriles with Imines Using Chiral Bis(imidazoline)–Palladium Catalysts

The catalytic enantioselective reaction of α‐phenylthioacetonitriles with imines has been developed. The reaction of various imines proceeds in good yields and diastereo‐ and enantioselectivities in the presence of chiral bis(imidazoline)–palladium catalysts. The obtained products can be converted into β‐aminonitrile or β‐aminoamide compounds without loss of enantiopurity.     

A new solvent extraction scheme for the separation of platinum,palladium, rhodium and iridium

A new scheme is proposed for the separation of platinum, palladium, rhodium and iridium in hydrochloric acid solutions, by solvent extraction. Platinum and palladium are complexed with 2-mercaptobenzothiazole and potassium iodide and simultaneously extracted into chloroform, thus separating them from rhodium and iridium. Palladium is separated from platinum by extracting its dimethylglyoxime complex into chloroform, while rhodium is separated from iridium by extracting its 2-mercaptobenzothiazole complex into chloroform after reduction with tin(II) chloride.     

Immobilization of Iridium Triazolylidene Complexes into Polymer Scaffolds and Their Application in Water Oxidation

A triazolylidene irdium complex was postmodified with simple methods to introduce two alcohol groups in the triazolylidene backbone. The reaction of this difunctionalized iridium triazolylidene unit with terephthalic acid chloride allowed for integrating these iridium complexes into a polymeric assembly. Both the monomeric complexes as well as the polymerized systems showed activity in water oxidation driven by cerium ammonium nitrate as a chemical oxidant with comparable catalytic performance. Post-reaction analysis of the aqueous reaction solution by ICP MS showed a partial loss of iridium from the polymer into the aqueous phase under catalytic conditions, indicating a need for more robust polymer supports for this type of application.