Unsymmetric Platinum(II) Bis(aryleneethynylene) Complexes as Photosensitizers for Dye‐Sensitized Solar Cells

Four new unsymmetric platinum(II) bis(aryleneethynylene) derivatives have been designed and synthesized, which showed good light‐harvesting capabilities for application as photosensitizers in dye‐sensitized solar cells (DSSCs). The absorption, electrochemical, time‐dependent density functional theory (TD‐DFT), impedance spectroscopic, and photovoltaic properties of these platinum(II)‐based sensitizers have been fully characterized. The optical and TD‐DFT studies show that the incorporation of a strongly electron‐donating group significantly enhances the absorption abilities of the complexes. The maximum absorption wavelength of these four organometallic dyes can be tuned by various structural modifications of the triphenylamine and/or thiophene electron donor, improving the light absorption range up to 650 nm. The photovoltaic performance of these dyes as photosensitizers in mesoporous TiO₂ solar cells was investigated, and a power conversion efficiency as high as 1.57 % was achieved, with an open‐circuit voltage of 0.59 V, short‐circuit current density of 3.63 mA cm^?2, and fill factor of 0.73 under simulated AM 1.5G solar illumination.     

Molecular Dyads Comprising Metalloporphyrin and Alkynylplatinum(II) Polypyridine Terminal Groups for Use as a Sensitizer in Dye‐Sensitized Solar Cells

A new class of molecular dyads comprising metalloporphyrin‐linked alkynylplatinum(II) polypyridine complexes with carboxylic acids as anchoring groups has been designed and synthesized. These complexes can sensitize nanocrystalline TiO₂ in dye‐sensitized solar cell (DSSC) studies. The photophysical, electrochemical, and luminescence properties of the complexes were studied and their excited‐state properties were investigated by nanosecond transient absorption spectroscopy, with the charge‐separated [Por^.??{(C?C)Pt(tBu₃tpy)}^.+] state observed upon excitation. Excited‐state redox potentials were determined; the electrochemical data supports the capability of the complexes to inject an electron into the conduction band of TiO₂. The complexes sensitize nanocrystalline TiO₂ and exhibited photovoltaic properties, as characterized by current–voltage measurements under illumination of air mass 1.5 G sunlight (100 mWcm^?2). A DSSC based on one of the complexes showed a short‐circuit photocurrent of 10.1 mAcm^?2, an open‐circuit voltage of 0.64 V, and a fill factor of 0.52, giving an overall power conversion efficiency of 3.4 %.     

Application of the Organic Photosensitizers Bearing Two Carboxylic Acid Groups to Dye‐Sensitized Solar Cells

Three electron donor‐?? bridge‐electron acceptor (D‐π‐A) organic dyes bearing two carboxylic acid groups were applied to dye‐sensitized solar cells (DSSC) as sensitizers, in which one triphenylamine or modified triphenylamine and two rhodanine‐3‐acetic acid fragments act as D and A, respectively. It was found that the introduction of t‐butyl or methoxy group in the triphenylamine subunit could lead to more efficient photoinduced intramolecular charge transfer, thus improving the overall photoelectric conversion efficiency of the resultant DSSC. Under global AM 1.5 solar irradiation (73 mW·cm^?2), the dye molecule based on methoxy‐substituted triphenylamine achieved the best photovoltaic performance: a short circuit photocurrent density (J_sc) of 12.63 mA·cm^?2, an open circuit voltage (V_oc) of 0.55 V, a fill factor (FF) of 0.62, corresponding to an overall efficiency (η) of 5.9%.     

New Bithiazole‐Based Sensitizers for Efficient and Stable Dye‐Sensitized Solar Cells

A series of new push–pull organic dyes ( BT‐I – VI ), incorporating electron‐withdrawing bithiazole with a thiophene, furan, benzene, or cyano moiety, as π spacer have been synthesized, characterized, and used as the sensitizers for dye‐sensitized solar cells (DSSCs). In comparison with the model compound T1 , these dyes containing a thiophene moiety between triphenylamine and bithiazole display enhanced spectral responses in the red portion of the solar spectrum. Electrochemical measurement data indicate that the HOMO and LUMO energy levels can be tuned by introducing different π spacers between the bithiazole moiety and cyanoacrylic acid acceptor. The incorporation of bithiazole substituted with two hexyl groups is highly beneficial to prevent close π–π aggregation, thus favorably suppressing charge recombination and intermolecular interaction. The overall conversion efficiencies of DSSCs based on bithiazole dyes are in the range of 3.58 to 7.51 %, in which BT‐I ‐based DSSCs showed the best photovoltaic performance: a maximum monochromatic incident photon‐to‐current conversion efficiency (IPCE) of 81.1 %, a short‐circuit photocurrent density (J_sc) of 15.69 mA cm^?2, an open‐circuit photovoltage (V_oc) of 778 mV, and a fill factor (ff) of 0.61, which correspond to an overall conversion efficiency of 7.51 % under standard global AM 1.5 solar light conditions. Most importantly, long‐term stability of the BT‐I – III ‐based DSSCs with ionic‐liquid electrolytes under 1000 h of light soaking was demonstrated and BT‐II with a furan moiety exhibited better photovoltaic performance of up to 5.75 % power conversion efficiency.     

Enhanced Performance of Quasi‐Solid‐State Dye‐Sensitized Solar Cells by Branching the Linear Substituent in Sensitizers Based on Thieno[3,4‐c]pyrrole‐4,6‐dione

Thieno[3,4‐c]pyrrole‐4,6‐dione‐based organic sensitizers with triphenylamine ( FNE38 and FNE40 ) or julolidine ( FNE39 and FNE41 ) as electron‐donating unit have been designed and synthesized. A linear hexyl group or a branched alkyl chain, the 2‐ethylhexyl group, is incorporated into molecular skeleton of the dyes to minimize intermolecular interactions. The absorption, electrochemical, and photovoltaic properties for these sensitizers were then systematically investigated. It is found that the sensitizers have similar photophysical and electrochemical properties, such as absorption spectra and energy levels, owing to their close chemical structures. However, the quasi‐solid‐state dye‐sensitized solar cells (DSSCs) based on the two types of sensitizers exhibit very different performance parameters. Upon the incorporation of the short ethyl group on the hexyl moiety, enhancements in both open‐circuit voltage (V_oc) and short‐circuit current (J_sc) are achieved for the quasi‐solid‐state DSSCs. The V_oc gains originating from the suppression of charge recombination were quantitatively investigated and are in good agreement with the experimentally observed V_oc enhancements. Therefore, an enhanced solar energy conversion efficiency (η) of 6.16 %, constituting an increase by 23 %, is achieved under standard AM 1.5 sunlight without the use of coadsorbant agents for the quasi‐solid‐state DSSC based on sensitizer FNE40 , which bears the branched alkyl group, in comparison with that based on FNE38 carrying the linear alkyl group. This work presents a design concept for considering the crucial importance of the branched alkyl substituent in novel metal‐free organic sensitizers.     

β‐Functionalized Push–Pull opp‐Dibenzoporphyrins as Sensitizers for Dye‐Sensitized Solar Cells

A novel class of β‐functionalized push–pull zinc opp ‐dibenzoporphyrins were designed, synthesized, and utilized as sensitizers for dye‐sensitized solar cells. Spectral, electrochemical, and computational studies were systematically performed to evaluate their spectral coverage, redox behavior, and electronic structures. These porphyrins displayed much broader spectral coverage and more facile oxidation upon extension of the π conjugation. Free‐energy calculations and femtosecond transient absorption studies (charge injection rate in the range of 10¹¹ s⁻¹) suggested efficient charge injection from the excited singlet state of the porphyrin to the conduction band of TiO₂. The power conversion efficiency (η ) of YH3 bearing acrylic acid linkers (η =5.9 %) was close to that of the best ruthenium dye N719 (η =7.4 %) under similar conditions. The superior photovoltaic performance of YH3 was attributed to its higher light‐harvesting ability and more favorable electron injection and collection, as supported by electrochemical impedance spectral studies. This work demonstrates the exceptional potential of benzoporphyrins as sensitizers for dye‐sensitized solar cells.     

Molecular Design of D‐π‐A Type II Organic Sensitizers for Dye Sensitized Solar Cells

Four new type II organic dyes with D‐π‐A structure (donor‐π‐conjugated‐acceptor) and two typical type II sensitizers based on catechol as reference dyes are synthesized and applied in dye sensitized solar cells (DSCs). The four dyes can be adsorbed on TiO₂ through hydroxyl group directly. Electron injection can occur not only through the anchoring group (hydroxyl group) but also through the electron‐withdrawing group (? CN) located close to the semiconductor surface. Experimental results show that the type II sensitizers with a D‐π‐A system obviously outperform the typical type II sensitizers providing much higher conversion efficiency due to the strong electronic push‐pull effect. Among these dyes, LS223 gives the best solar energy conversion efficiency of 3.6%, with J_sc=7.3 mA·cm^?2, V_oc=0.69 V, FF=0.71, the maximum IPCE value reaches 74.9%.     

Phenanthrene‐Fused‐Quinoxaline as a Key Building Block for Highly Efficient and Stable Sensitizers in Copper‐Electrolyte‐Based Dye‐Sensitized Solar Cells

Dye‐sensitized solar cells (DSSCs) based on Cu^II/I bipyridyl or phenanthroline complexes as redox shuttles have achieved very high open‐circuit voltages (V_OC, more than 1 V). However, their short‐circuit photocurrent density (J_SC) has remained modest. Increasing the J_SC is expected to extend the spectral response of sensitizers to the red or NIR region while maintaining efficient electron injection in the mesoscopic TiO₂ film and fast regeneration by the Cu^I complex. Herein, we report two new D‐A‐π‐A‐featured sensitizers termed HY63 and HY64 , which employ benzothiadiazole (BT) or phenanthrene‐fused‐quinoxaline (PFQ), respectively, as the auxiliary electron‐withdrawing acceptor moiety. Despite their very similar energy levels and absorption onsets, HY64 ‐based DSSCs outperform their HY63 counterparts, achieving a power conversion efficiency (PCE) of 12.5 %. PFQ is superior to BT in reducing charge recombination resulting in the near‐quantitative collection of photogenerated charge carriers.     

Dye-sensitized solar cells based on donor-π-acceptor fluorescent dyes with a pyridine ring as an electron-withdrawing-injecting anchoring group

A new‐type of donor–acceptor π‐conjugated (D‐π‐A) fluorescent dyes NI3 – NI8 with a pyridine ring as electron‐withdrawing‐injecting anchoring group have been developed and their photovoltaic performances in dye‐sensitized solar cells (DSSCs) are investigated. The short‐circuit photocurrent densities and solar energy‐to‐electricity conversion yields of DSSCs based on NI3 – NI8 are greater than those for the conventional D‐π‐A dye sensitizers NI1 and NI2 with a carboxyl group as the electron‐withdrawing anchoring group. The IR spectra of NI3 – NI8 adsorbed on TiO₂ indicate the formation of coordinate bonds between the pyridine ring of dyes NI3 – NI8 and the Lewis acid sites (exposed Tiⁿ⁺ cations) of the TiO₂ surface. This work demonstrates that the pyridine rings of D‐π‐A dye sensitizers that form a coordinate bond with the Lewis acid site of a TiO₂ surface are promising candidates as not only electron‐withdrawing anchoring group but also electron‐injecting group, rather than the carboxyl groups of the conventional D‐π‐A dye sensitizers that form an ester linkage with the Brønsted acid sites of the TiO₂ surface.     

(Dibenzoylmethanato)boron Difluoride Derivatives Containing Triphenylamine Moieties: A New Type of Electron‐Donor/π‐Acceptor System for Dye‐Sensitized Solar Cells

(Dibenzoylmethanato)boron difluoride derivatives containing triphenylamine moieties were synthesized as a new type of electron‐donor/π‐acceptor system. These new compounds exhibited long‐wavelength absorptions in the UV/Vis spectra, and reversible oxidation and reduction waves in cyclic voltammetry experiments. Their amphoteric redox properties are based on their resonance hybrid forms, in which a positive charge is delocalized on the triphenylamine moieties and a negative charge is localized on the boron atoms. Molecular orbital (MO) calculations indicate that their HOMO and LUMO energies vary with the number of phenylene rings connected to the difluoroboron‐chelating ring. This is useful for optimizing the HOMO and LUMO levels to an iodine redox (I^?/I₃^?) potential and a titanium dioxide conduction band, respectively. Dye‐sensitized solar cells fabricated by using these compounds as dye sensitizers exhibited solar‐to‐electric power conversion efficiencies of 2.7–4.4 % under AM 1.5 solar light.     

Novel Thiazolo[5,4‐d]thiazole‐Based Organic Dyes for Quasi‐Solid‐State Dye‐Sensitized Solar Cells

A series of novel metal‐free organic dyes containing the thiazolo[5,4‐d]thiazole moiety were designed and synthesized for quasi‐solid‐state dye‐sensitized solar cells (DSSCs). Different alkoxy chains were introduced into the electron donor part of the dye molecules for comparison. The optical, electrochemical, and photovoltaic properties for all sensitizers were systematically investigated. It was found that the sensitizers with the different alkoxy groups have similar photophysical and electrochemical properties, such as absorbance and energy levels, owing to their close chemical structures. However, the quasi‐solid‐state DSSCs based on the resulting sensitizers exhibit different performance parameters. The quasi‐solid‐state DSSC based on sensitizer FNE74 with two octyloxy chains possessed the highest solar energy conversion efficiency of 5.10 % under standard AM 1.5G sunlight illumination without the use of coadsorbant agents.     

Theoretical rationalization for reduced charge recombination in bulky carbazole‐based sensitizers in solar cells

The search for greater efficiency in organic dye‐sensitized solar cells (DSCs) and in their perovskite cousins is greatly aided by a more complete understanding of the spectral and morphological properties of the photoactive layer. This investigation resolves a discrepancy in the observed photoconversion efficiency (PCE) of two closely related DSCs based on carbazole‐containing D–π–A organic sensitizers. Detailed theoretical characterization of the absorption spectra, dye adsorption on TiO₂, and electronic couplings for charge separation and recombination permit a systematic determination of the origin of the difference in PCE. Although the two dyes produce similar spectral features, ground‐ and excited‐state density functional theory (DFT) simulations reveal that the dye with the bulkier donor group adsorbs more strongly to TiO₂, experiences limited π–π aggregation, and is more resistant to loss of excitation energy via charge recombination on the dye. The effects of conformational flexibility on absorption spectra and on the electronic coupling between the bright exciton and charge‐transfer states are revealed to be substantial and are characterized through density‐functional tight‐binding (DFTB) molecular dynamics sampling. These simulations offer a mechanistic explanation for the superior open‐circuit voltage and short‐circuit current of the bulky‐donor dye sensitizer and provide theoretical justification of an important design feature for the pursuit of greater photocurrent efficiency in DSCs. © 2017 Wiley Periodicals, Inc.     

Restricted Rotation of σ‐Bonds through a Rigidified Donor Structure to Increase the ICT Ability of Platinum‐Acetylide‐Based DSSCs

A series of new triarylamine‐based platinum‐acetylide complexes ( WY s) have been designed and synthesized as new sensitizers for applications in dye‐sensitized solar cells (DSSCs). With the aim of investigating the effect of a rigidifying donor structure on the photoelectrical parameters of the corresponding DSSCs, two new sensitizers, WY1 and WY2 , with rigid and coplanar fluorene units as an electron donor, were prepared. Moreover, two sensitizers that contained triphenylamine units as an electron donor, WY3 and WY4 , were also synthesized for comparison. The photo‐ and electrochemical properties of all of these new complexes have been extensively explored. We found that the dimethyl‐fluorene unit exhibited a stronger electron‐donating ability and better photovoltaic performance compared to the triphenylamine unit, owing to its rigidifying structure, which restricted the rotation of σ bonds, thus increasing the conjugation efficiency. Furthermore, WY2 , which contained a dimethyl‐fluorene unit as an electron donor and bithiophene as a π bridge, showed a relatively high open‐circuit voltage (V_oc) of 640 mV and a PCE of 4.09 %. This work has not only expanded the choice of platinum‐acetylide sensitizers, but also demonstrates the advantages of restricted rotation of donor σ bonds for improved behavior of the corresponding DSSCs.     

CdSe Quantum Dots and N719‐Dye Decorated Hierarchical TiO2 Nanorods for the Construction of Efficient Co‐Sensitized Solar Cells

Three‐dimensional hierarchical TiO₂ nanorods (HTNs) decorated with the N719 dye and 3‐mercaptopropionic or oleic acid capped CdSe quantum dots (QDs) in photoanodes for the construction of TiO₂ nanorod‐based efficient co‐sensitized solar cells are reported. These HTN co‐sensitized solar cells showed a maximum power‐conversion efficiency of 3.93 %, and a higher open‐circuit voltage and fill factor for the photoanode with 3‐mercaptopropionic acid capped CdSe QDs due to the strong electronic interactions between CdSe QDs, N719 dye and HTNs, and the superior light‐harvesting features of the HTNs. An electrochemical impedance analysis indicated that the superior charge‐collection efficiency and electron diffusion length of the CdSe QD‐coated HTNs improved the photovoltaic performance of these HTN co‐sensitized solar cells.     

How Does Peripheral Functionalization of Ruthenium(II)–Terpyridine Complexes Affect Spatial Charge Redistribution after Photoexcitation at the Franck–Condon Point?

Ruthenium polypyridine‐type complexes are extensively used sensitizers to convert solar energy into chemical and/or electrical energy, and they can be tailored through their metal‐to‐ligand charge‐transfer (MLCT) properties. Much work has been directed at harnessing the triplet MLCT state in photoinduced processes, from sophisticated molecular architectures to dye‐sensitized solar cells. In dye‐sensitized solar cells, strong coupling to the semiconductor exploits the high reactivity of the (hot) singlet/triplet MLCT state. In this work, we explore the nature of the ¹MLCT states of remotely substituted Ru^II model complexes by both experimental and theoretical techniques. Two model complexes with electron‐withdrawing (i.e. NO₂) and electron‐donating (i.e. NH₂) groups were synthesized; these complexes contained a phenylene spacer to serve as a spectroscopic handle and to confirm the contribution of the remote substituent to the ¹MLCT transition. [Ru(tpy)₂]²⁺‐based complexes (tpy=2,2′:6′,2′′‐terpyridine) were further desymmetrized by tert‐butyl groups to yield unidirectional ¹MLCTs with large transition dipole moments, which are beneficial for related directional charge‐transfer processes. Detailed comparison of experimental spectra (deconvoluted UV/Vis and resonance Raman spectroscopy data) with theoretical calculations based on density functional theory (including vibronic broadening) revealed different properties of the optically active bright ¹MLCT states already at the Franck–Condon point.     

The Role of π Bridges in High‐Efficiency DSCs Based on Unsymmetrical Squaraines

A series of squaraine‐based sensitizers with various π bridges and anchors were prepared and examined in dye‐sensitized solar cells. The carboxylic anchor group was attached onto a squaraine dye through π bridges with and without an ethynyl spacer. DFT studies indicate that the LUMO is delocalized throughout the dyes, whilst the HOMO resides on the squaraine core. The dye that incorporates a 4,4‐di‐n‐hexyl‐cyclopentadithiophene group that is directly attached onto the π bridge, JD10 , exhibits the highest power conversion efficiency in a DSC; this result is attributed, in part, to the deaggregative properties that are associated with the gem‐di‐n‐hexyl substituents, which extend above and below the π‐conjugated dye plane. Dye JD10 demonstrates a power‐conversion efficiency of 7.3 % for liquid‐electrolyte dye‐sensitized solar cells and 7.9 % for cells that are co‐sensitized by another metal‐free dye, D35 , which substantially exceed the performance of any previously tested squaraine sensitizer. A panchromatic incident‐photon‐to‐current‐conversion efficiency curve is realized for this dye with an excellent short‐circuit current of 18.0 mA cm^?2. This current is higher than that seen for other squaraine dyes, partially owing to a high molar absorptivity of >5 000 M ^?1 cm^?1 from 400 nm to the long‐wavelength onset of 724 nm for dye JD10 .     

Synthesis and photovoltaic properties of a low‐band‐gap polymer consisting of alternating thiophene and benzothiadiazole derivatives for bulk‐heterojunction and dye‐sensitized solar cells

We synthesized a novel low‐band‐gap, conjugated polymer, poly[4,7‐bis(3′,3′‐diheptyl‐3,4‐propylenedioxythienyl)‐2,1,3‐benzothiadiazole] [poly(heptyl₄‐PTBT)], consisting of alternating electron‐rich, diheptyl‐substituted propylene dioxythiophene and electron‐deficient 2,1,3‐benzothiadiazole units, and its photovoltaic properties were investigated. A thin film of poly(heptyl₄‐PTBT) exhibited an optical band gap of 1.55 eV. A bulk‐heterojunction solar cell with indium tin oxide/poly(3,4‐ethylenedioxythiophene)/poly(heptyl₄‐PTBT): methanofullerene [6,6]‐phenyl‐C61‐butyric acid methyl ester (PCBM) (1:4)/LiF/Al was fabricated with poly(heptyl₄‐PTBT) as an electron donor and PCBM as an electron acceptor and showed an open‐circuit voltage, short‐circuit current density, and power conversion efficiency of 0.37 V, 3.15 mA/cm², and 0.35% under air mass 1.5 (AM1.5G) illumination (100 mW/cm²), respectively. A solid‐state, dye‐sensitized solar cell with a SnO₂:F/TiO₂/N3 dye/poly(heptyl₄‐PTBT)/Pt device was fabricated with poly(heptyl₄‐PTBT) as a hole‐transport material. This device exhibited a high power conversion efficiency of 3.1%, which is the highest power conversion efficiency value with hole‐transport materials in dye‐sensitized solar cells to date. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1394–1402, 2007     

Low‐cost Nickel Complex Dye‐sensitized Titania Nanoparticle/nanotube Composites for Solar Cells

In this work, high‐performance dye‐sensitized solar cells (DSSCs) based on new low‐cost visible nickel complex dye (VisDye), TiO₂ nanoparticle/nanotube composites electrodes, carbon nanoparticles counter electrodes, and ionic liquids electrolytes have been fabricated. The electronic structure, optical spectroscopy, and electrochemical properties of the VisDye were studied. Experimental results indicate that it is beneficial to improve the electron transport and power conversion efficiency using the nickel complex VisDye and TiO₂ nanoparticle/nanotube composites. Under optimized conditions, the solar energy conversion efficiencies were measured. The short‐circuit current density (J_SC), the open‐circuit voltage (V_OC), the fill factor (FF), and the overall efficiency (η) of the DSSCs are 10.01 mA/cm², 516 mV, 0.68, and 3.52%, respectively. This study demonstrates that the combination of new VisDye with TiO₂ nanoparticle/nanotube composites electrodes and carbon nanoparticles counter electrodes provide a way to fabricate highly efficient dye‐sensitized solar cells in low‐cost production.     

Triphenylamine Groups Improve Blocking Behavior of Phenoxazine Dyes in Cobalt‐Electrolyte‐Based Dye‐Sensitized Solar Cells

Novel phenoxazine dyes are successfully introduced as sensitizers into dye‐sensitized solar cells (DSCs) with cobalt‐based electrolyte. In sensitizers with triphenylamine (TPA) groups recombination from electrons in the TiO₂ conduction band to the cobalt(III) species is suppressed. The effect of the steric properties of the phenoxazine sensitizers on the overall device performance and on recombination and regeneration processes is compared. Optimized DSCs sensitized with IB2 having two TPA groups in combination with tris(2,2′‐bipyridyl) cobalt(II/III) yield efficiencies of 6.3 %, similar to that of IB3 , which is equipped with mutiple alkoxy groups. TH310 with only one TPA group gives lower efficiency and open circuit voltage, while IB1 without TPA groups performs even worse. These results demonstrate that both TPA groups on the IB2 are needed for an efficient blocking effect. These results reveal a possible new role for TPA units in DSC sensitizer design.     

Molecular Design Rule of Phthalocyanine Dyes for Highly Efficient Near‐IR Performance in Dye‐Sensitized Solar Cells

A series of zinc–phthalocyanine sensitizers ( PcS16 – 18 ) with different adsorption sites have been designed and synthesized in order to investigate the dependence of adsorption‐site structures on the solar‐cell performances in zinc–phthalocyanine based dye‐sensitized solar cells. The change of adsorption site affected the electron injection efficiency from the photoexcited dye into the nanocrystalline TiO₂ semiconductor, as monitored by picosecond time‐resolved fluorescence spectroscopy. The zinc–phthalocyanine sensitizer PcS18 , possessing one carboxylic acid directly attached to the ZnPc ring and six 2,6‐diisopropylphenoxy units, showed a record power conversion efficiency value of 5.9 % when used as a light‐harvesting dye on a TiO₂ electrode under one simulated solar condition.