Molecular Materials with Contrasting Optical Responses from a Single‐Pot Reaction and Fluorescence Switching in a Carbon Acid

Three for the price of one : The reaction of tetracyanoquinodimethane with an aromatic amine is shown to follow an unusual course leading to three products in a single pot. The product molecules form a family of materials with contrasting optical responses, in that they exhibit light emission of different colors and emission switching that is sensitively triggered by acidic/basic environments (see scheme).

     

Surface‐Enhanced Fluorescence from Fluorophore‐Assembled Monolayers by Using Ag@SiO2 Nanoparticles

A new and simple procedure to enhance the fluorescence of analytes on the surfaces of a solid substrate is demonstrated based on Ag@SiO₂ nanoparticles. Two kinds of silver–silica core–shell nanoparticles with shell thicknesses of around 3 and 15 nm have been prepared and used as enhancing agents, respectively. By simply pipetting drops of the enhancing agents onto substrate surfaces with Rose Bengal monolayers, an enhancement of about 27 times, compared with the control sample, is achieved by using the Ag@SiO₂ nanoparticles with shells of about 3 nm, whereas an enhancement of around 11.7 times is obtained when using those with thicker shells. The effects of shell thickness and surface density of the enhancing agents on the enhancement have been investigated experimentally. The results show that this method can be potentially helpful in fluorescence‐based surface analysis.     

Interfacing Living Unicellular Algae Cells with Biocompatible Polyelectrolyte‐Stabilised Magnetic Nanoparticles

Green algae are a promising platform for the development of biosensors and bioelectronic devices. Here we report a reliable single‐step technique for the functionalisation of living unicellular green algae Chlorella pyrenoidosa with biocompatible 15 nm superparamagnetic nanoparticles stabilised with poly(allylamine hydrochloride). The magnetised algae cells can be manipulated and immobilised using external permanent magnets. The distribution of the nanoparticles on the cell walls of C. pyrenoidosa was studied by optical and fluorescence microscopy, TEM, SEM and EDX spectroscopy. The viability and the magnetic properties of the magnetised algae are studied in comparison with the native cells. The technique may find a number of potential applications in biotechnology and bioelectronics.

     

Sequence‐Dependent dsDNA‐Templated Formation of Fluorescent Copper Nanoparticles

There are only a few systematic rules about how to selectively control the formation of DNA‐templated metal nanoparticles (NPs) by varying sequence combinations of double‐stranded DNA (dsDNA), although many attempts have been made. Herein, we develop a facile method for sequence‐dependent formation of fluorescent CuNPs by using dsDNA as templates. Compared with random sequences, AT sequences are better templates for highly fluorescent CuNPs. Other specific sequences, for example, GC sequences, do not induce the formation of CuNPs. These results shed light on directed DNA metallization in a sequence‐specific manner. Significantly, both the fluorescence intensity and the fluorescence lifetime of CuNPs can be tuned by the length or the sequence of dsDNA. In order to demonstrate the promising practicality of our findings, a sensitive and label‐free fluorescence nuclease assay is proposed.     

Polyelectrolyte‐Assisted Noncovalent Functionalization of Carbon Nanotubes with Ordered Self‐Assemblies of a Water‐Soluble Porphyrin

The self‐assembly and induced supramolecular chirality of meso‐tetrakis(4‐sulfonatophenyl)porphyrin (TSPP) on both single‐wall (SWCNT) and multiwall carbon nanotubes (MWCNT) are investigated. Under mild pH conditions (pH 3), TSPP forms aggregates when CNTs are dispersed in an aqueous solution containing positively charged polyelectrolytes such as poly‐L ‐lysine (PLL) or poly(allylamine hydrochloride) (PAH). Evidence for the geometry of the porphyrin aggregates is obtained from absorption spectra, whereby the fingerprints of J‐ and H‐aggregates are clearly seen only in the presence of smaller‐diameter nanotubes. J‐aggregates are better stabilized with PLL, whereas in the presence of PAH mainly H‐aggregates prevail. Excited‐state interactions within these nanohybrids are studied by steady‐state and time‐resolved fluorescence. The porphyrin emission intensity in the nanohybrid solution is significantly quenched compared to that of TSPP alone, and this implies strong electronic interaction between CNTs and porphyrin molecules. Fluorescence lifetime imaging microscopy (FLIM) further supports that porphyrin arrays are associated with the MWCNT sidewalls wrapped in PLL. In the case of the SWCNT hybrid, spherical structures associated with longer fluorescence lifetime appeared after one week, indicative of H‐aggregates of TSPP. The latter are the result of π–π stacking of porphyrin units on neighboring nanotubes facilitated by the strong tendency of these nanotubes to interact with each other. These results highlight the importance of optimum dimensions and surface‐area architectures of CNTs in the control/stability of the porphyrin aggregates with promising properties for light harvesting.     

Nanoparticle‐Enhanced Fluorescence Imaging of Latent Fingerprints Reveals Drug Abuse

No sweat! The sweat in a latent fingerprint (LFP) can contain orally ingested drugs and their metabolites. In a new method for drug detection, primary antibodies(Abs) against drug metabolites are conjugated to magnetic nanoparticles (NPs). The LFP is incubated with the NPs, excess particles removed, and the LFP treated with a fluorescently labeled secondary antibody. Fluorescence imaging then allows characterization.

     

pH‐Disintegrable Polyelectrolyte Multilayer‐Coated Mesoporous Silica Nanoparticles Exhibiting Triggered Co‐Release of Cisplatin and Model Drug Molecules

We report on the fabrication of pH‐disintegrable polyelectrolyte multilayer‐coated mesoporous silica nanoparticles (MSN) capable of triggered co‐release of cisplatin and model drug molecules. The outer polyelectrolyte multilayer was assembled from permanently cationic polyelectrolyte, poly(allyl amine hydrochloride) (PAH), and negatively charged polyelectrolyte, P(DMA‐co‐TPAMA), consisting of N,N‐dimethylacrylamide (DMA) and 3,4,5,6‐tetrahydrophthalic anhydride‐functionalized N‐(3‐aminopropyl)methacrylamide (TPAMA) monomer units, which exhibits pH‐induced charge conversion characteristics. Thus, the subtle alteration of solution pH from 7.4 to ≈5–6 can lead to the disintegration of outer polyelectrolyte multilayers, accompanied with the co‐release of cisplatin and RhB.

     

Efficient Excitation‐Energy Transfer in Ion‐Based Organic Nanoparticles with Versatile Tunability of the Fluorescence Colours

Organic nanoparticles consisting of 3,3′‐diethylthiacyanine (TC) and ethidium (ETD) dyes are synthesized by ion‐association between the cationic dye mixture (10 % ETD doping) and the tetrakis(4‐fluorophenyl)borate (TFPB) anion, in the presence of a neutral stabilizing polymer, in aqueous solution. Doping with ETD makes the particle size smaller than without doping. Size tuning can also be conducted by varying the molar ratio (ρ) of the loaded anion to the cationic dyes. The fluorescence spectrum of TC shows good overlap with the absorption of ETD in the 450–600 nm wavelength region, so efficient excitation‐energy transfer from TC (donor) to ETD (acceptor) is observed, yielding organic nanoparticles whose fluorescence colours are tunable. Upon ETD doping, the emission colour changes significantly from greenish‐blue to reddish or whitish. This change is mainly dependent on ρ. For the doped nanoparticle sample with ρ=1, the intensity of fluorescence ascribed to ETD is ～150‐fold higher than that from pure ETD nanoparticles (efficient antenna effect). Non‐radiative Förster resonance‐energy transfer (FRET) is the dominant mechanism for the ETD fluorescence enhancement. The organic nanoparticles of a binary dye system fabricated by the ion‐association method act as efficient light‐harvesting antennae, which are capable of transferring light energy to the dopant acceptors in very close proximity to the donors, and can have multi‐wavelength emission colours with high fluorescence quantum yields.     

Cooperative Self‐Assembly‐Assisted Formation of Monodisperse Optically Active Spherical and Anisotropic Nanoparticles

We report a new method in which spontaneous self‐assembly is employed to synthesize monodisperse polymer nanoparticles with controlled size (<50 nm), shape, tunable functionality, and enhanced solvent and thermal stability. Cooperative noncovalent interactions, such as hydrogen bonding and aromatic π–π stacking, assist self‐assembly of amphiphilic macromolecules (polystyrene‐block‐polyvinylpyridine, PS? PVP) and structure directing agents (SDAs) to form both spherical and anisotropic solid polymer nanoparticles with SDAs residing in the particle core surrounded by the polymers. Through detailed investigations by scanning electron microscopy and transmission electron microscopy (TEM), we have rationalized nanoparticle morphology evolution and dependence on factors such as SDA concentration and PVP size. By keeping the PS chain size constant, the particle morphology progresses from continuous films to spherical particles, and on to cylindrical nanowires or rods with increasing the PVP chain size. The final nanoparticles are very stable and can be redispersed in common solvents to form homogenous solutions and thin films of ordered nanoparticle arrays through solvent evaporation processes. These nanoparticles exhibit tunable fluorescent colors (or emissions) depending on the choices of the central SDAs. Our method is simple and general without requiring complicated synthetic chemistry, stabilizing surfactants, or annealing procedures (e.g., temperature or solvent annealing), making scalable synthesis feasible.     

Surface‐Bound Cucurbit[8]uril Catenanes on Magnetic Nanoparticles Exhibiting Molecular Recognition

We demonstrate the preparation of surface‐bound cucurbit[8]uril (CB[8]) catenanes on silica nanoparticles (NPs), where CB[8] was employed as a tethered supramolecular “handcuff” to selectively capture target guest molecules. In this catenane, CB[8] was threaded onto a methyl viologen (MV²⁺) axle and immobilized onto silica NPs. The formation of CB[8] catenanes on NPs were confirmed by UV/Vis titration experiments and lithographic characterization, demonstrating a high density of CB[8] on the silica NPs surface, 0.56 nm^?2. This CB[8] catenane system exhibits specific molecular recognition towards certain aromatic molecules such as perylene bis(diimide), naphthol and aromatic amino acids, and thus it can act as a nanoscale molecular receptor for target guests. Furthermore, we also demonstrate its use as an efficient and recyclable nano‐platform for peptide separation. By embedding magnetic NPs inside silica NPs, separation could be achieved by simply applying an external magnetic field. Moreover, the peptides captured by the catenanes could be released by reversible single‐electron reduction of MV²⁺. The entire process demonstrated high recoverability.     

Enhanced Magneto‐optical Properties of Semiconductor EuS Nanocrystals Assisted by Surface Plasmon Resonance of Gold Nanoparticles

Remarkable magneto‐optical properties of a new isolator material, that is, europium sulfide nanocrystals with gold (EuS–Au nanosystem), has been demonstrated for a future photo‐information technology. Attachment of gold particles that exhibit surface plasmon resonance leads to amplification of the magneto‐optical properties of the EuS nanocrystals. To construct the EuS–Au nanosystems, cubic EuS and spherical Au nanocrystals have been joined by a variety of organic linkers, that is, 1,2‐ethanedithiol (EDT), 1,6‐hexanedithiol (HDT), 1,10‐decanedithiol (DDT), 1,4‐bisethanethionaphthalene (NpEDT), or 1,4‐bisdecanethionaphthalene (NpDDT) . Formation of these systems was observed by XRD, TEM, and absorption spectra measurements. The magneto‐optical properties of the EuS–Au nanosystem have been characterized by using Faraday rotation spectroscopy. The Faraday rotation angle of the EuS–Au nanosystem is dependent on the Au particle size and interparticle distance between EuS and Au nanocrystals. Enhancement of the Faraday rotation of EuS–Au nanosystems was observed. The spin configuration in the excited state of the EuS–Au nanosystem was also investigated using photo‐assisted electron paramagnetic resonance.     

pH‐Dependent Metal‐Enhanced Fluorescence from CdTe@PAA Nanospheres near the Au Nanoparticles in Aqueous Solution

Metal‐enhanced fluorescence of semiconductor nanocrystals (NCs) is the current investigation focus. In this work, we directly observed metal‐enhanced fluorescence of CdTe@PAA nanaospheres in aqueous solution. The enhanced magnitude of photoluminescence (PL) was closely related to solution pH values, and the maximal PL enhancement is about 9 times compared with the ones without Au NPs. Furthermore, based on the results of absorptions and fluorescence lifetimes of CdTe@PAA‐Au mixed solution at different pH values, we studied the mechanisms and physics processes of pH‐dependent enhanced PL induced by Au NPs. The pH‐dependent PL of CdTe@PAA‐Au mixed solutions are due to the constantly changing distances between Au NPs and CdTe@PAA nanaospheres with pH. In the CdTe@PAA‐Au mixed solutions, CdTe@PAA nanospheres in close proximity to the Au NPs are exposed to the increased electric fields in between and around the NPs, effectively resulting in significant increases in their absorption cross section. This lends itself to a subsequent increase in the excitation and eventually in the fluorescence emission from the CdTe@PAA nanospheres.