Macrocycle breathing in [2]rotaxanes with tetralactam macrocycles

The structural dynamics of two pairs of [2]rotaxanes were compared using variable-temperature NMR. Each rotaxane had a surrounding tetralactam macrocycle with either 2,6-pyridine dicarboxamide or isophthalamide bridging units. Differences were observed in two types of rotational processes: spinning of the phenylene wall units in the surrounding macrocycle of squaraine rotaxanes and macrocycle pirouetting in xanthone rotaxanes. The rotaxanes with macrocycles containing 2,6-pyridine dicarboxamide bridges exhibited higher rotational barriers due to a cavity contraction effect, which disfavored macrocycle breathing.     

A Flexible Copper(I)‐Complexed [4]Rotaxane Containing Two Face‐to‐Face Porphyrinic Plates that Behaves as a Distensible Receptor

A new cyclic [4]rotaxane composed of two flexible bis‐macrocycles and two rigid axles is described. Each bis‐macrocycle consists of two rings attached to antipodal meso positions of a central Zn porphyrin through single C? C bonds. Each ring incorporates a 2,9‐diphenyl‐1,10‐phenanthroline chelation site. The axles contain two coplanar bidentate sites derived from the 2,2′‐bipyridine motif. The building blocks were assembled by using a one‐pot threading‐and‐stoppering reaction, which afforded the [4]rotaxane in 50 % yield. The “gathering‐and‐threading” effect of copper(I) was utilised in the formation of a [4]pseudorotaxane, which was immediately converted to the corresponding [4]rotaxane by a quadruple CuAAC stoppering reaction. The rotaxane contains two face‐to‐face zinc porphyrins, which allowed the coordination of ditopic guest substrates. The rotaxane host showed remarkable flexibility and was able to adjust its conformation to the guest size. It can be distended and accommodate rod‐like guests of 2.6 to 15.8 Å in length.     

Efficient End‐Capping Synthesis of Neutral Donor–Acceptor [2]Rotaxanes Under Additive‐Free and Mild Conditions

Efficient end‐capping synthesis of neutral donor–acceptor (D –A) [2]rotaxanes without loading any catalysts or activating agents was achieved by utilizing high reactivity of a pentacoordinated hydrosilane toward salicylic acid derivatives. As components of [2]rotaxanes, an electron‐deficient naphthalenediimide‐containing axle with a salicylic acid terminus and several electron‐rich bis(naphthocrown) ether macrocycles were employed. End‐capping reactions with the pentacoordinated hydrosilane underwent smoothly even at low temperature to afford the corresponding [2]rotaxanes in good yields. A [2]rotaxane containing bis‐1,5‐(dinaphtho)‐38‐crown‐10 ether as a wheel molecule was synthesized and isolated in 84 % yield by the end‐capping at ?10 °C, presenting the highest yield ever reported for the end‐capping synthesis of a neutral D –A [2]rotaxane. It was found that the yields of the [2]rotaxanes in the end‐capping reactions were almost parallel to the formation ratios of the corresponding pseudo[2]rotaxanes estimated by utilizing model systems. These results indicate that the end‐capping reaction using the pentacoordinated hydrosilane proceeded without perturbing the threading process, and most of the pseudo[2]rotaxanes underwent efficient end‐capping reaction even at low temperature.     

Langmuir and Langmuir–Blodgett Films from Amphiphilic Pillar[5]arene‐Containing [2]Rotaxanes

Amphiphilic pillar[5]arene‐containing [2]rotaxanes have been prepared and fully characterized. In the particular case of the [2]rotaxane incorporating a 1,4‐diethoxypillar[5]arene subunit, the structure of the compound was confirmed by X‐ray crystal structure analysis. Owing to a good hydrophilic/hydrophobic balance, stable Langmuir films have been obtained for these rotaxanes and the size of the peripheral alkyl chains on the pillar[5]arene subunit has a dramatic influence on the reversibility during compression–decompression cycles. Indeed, when these are small enough, molecular reorganization of the rotaxane by gliding motions are capable of preventing strong π–π interactions between neighboring macrocycles in the thin film.     

Pseudo[n,m]rotaxanes of Cucurbit[7/8]uril and Viologen‐Naphthalene Derivative: A Precise Definition of Rotaxane

Rotaxane is a kind of classic supramolecule, which is usually constructed from a number of macrocycles and one axis molecule. Herein, we have expanded the supramolecular structure of [n]rotaxane to offer a precise definition of (pseudo)[n,m]rotaxane for accurately describing the two kinds of (pseudo)rotaxanes structures, which are self‐assembled from cucurbit[7/8]uril (CB[7/8]) and viologen‐naphthalene derivative, respectively. Furthermore, these CB‐based pseudorotaxanes exhibit varied photophysical properties, stimuli‐responsive behavior triggered by competitive guest, and self‐sorting behavior.     

Homo- and hetero-[3]rotaxanes with two pi-systems clasped in a single macrocycle

Here we present the first synthesis of a [3]rotaxane with two dumbbell components threaded through a single gamma-cyclodextrin macrocycle. This synthesis is carried out in two steps: first one dumbbell is synthesized threaded through the macrocycle to give a [2]rotaxane, then a second dumbbell is synthesized through the remaining cavity of the [2]rotaxane. We have synthesized a hetero- [3]rotaxane with one stilbene and one cyanine dye threaded through gamma-cyclodextrin, which exhibits quantitative energy transfer between the two encapsulated dyes. The stilbene [2]rotaxane intermediate in this synthesis has a remarkably high affinity for suitably shaped hydrophobic guests in aqueous solution, facilitating the synthesis of [3]rotaxanes and suggesting possible applications in sensors.     

Logic Gating by Macrocycle Displacement Using a Double‐Stranded DNA [3]Rotaxane Shuttle

Molecular interlocked systems with mechanically trapped components can serve as versatile building blocks for dynamic nanostructures. Here we report the synthesis of unprecedented double‐stranded (ds) DNA [2]‐ and [3]rotaxanes with two distinct stations for the hybridization of the macrocycles on the axle. In the [3]rotaxane, the release and migration of the “shuttle ring” mobilizes a second macrocycle in a highly controlled fashion. Different oligodeoxynucleotides (ODNs) employed as inputs induce structural changes in the system that can be detected as diverse logically gated output signals. We also designed nonsymmetrical [2]rotaxanes which allow unambiguous localization of the position of the macrocycle by use of atomic force microscopy (AFM). Either light irradiation or the use of fuel ODNs can drive the threaded macrocycle to the desired station in these shuttle systems. The DNA nanostructures introduced here constitute promising prototypes for logically gated cargo delivery and release shuttles.     

Host-[2]rotaxanes as cellular transport agents

Host-[2]rotaxanes, containing a diarginine-derivatized dibenzo-24-crown-8 (DB24C8) ether as the ring and a cyclophane pocket or an aromatic cleft as one blocking group, are cell transport agents. These hosts strongly associate with a variety of amino acids, dipeptides, and fluorophores in water (1 mM phosphate buffer, pH 7.0), DMSO, and a 75/25 (v/v) buffer to DMSO solution. All peptidic guests in all solvent systems have association constants (K(A)'s) in the range of 1 x 10(4) to 5 x 10(4) M(-)(1), whereas the K(A) range for the fluorophores is 1 x 10(4) to 9 x 10(5) M(-)(1). Association constants for the cyclophane itself, cyclophane 3, are smaller. These values are in the 1 x 10(3) to 5 x 10(3) M(-)(1) range, which shows that the rotaxane architecture is advantageous for guest binding. Cyclophane-[2]rotaxane 1 efficiently transports fluorescein and a fluorescein-protein kinase C (PKC) inhibitor into eukaryotic COS-7 cells, including the nucleus. Interestingly, cleft-[2]rotaxane 2 does not transport fluorescein as efficiently, even though the results from the fluorescence assays show that both [2]rotaxanes bind fluorescein with the same ability.     

Cyclodextrin‐Based Size‐Complementary [3]Rotaxanes: Selective Synthesis and Specific Dissociation

α‐Cyclodextrin (CD)‐based size‐complementary [3]rotaxanes with alkylene axles were prepared in one‐pot by end‐capping reactions with aryl isocyanates in water. The selective formation of [3]rotaxane with a head‐to‐head regularity was indicated by the X‐ray structural analyses. Thermal degradation of the [3]rotaxanes bearing appropriate end groups proceeded by stepwise dissociation to yield not only the original components but also [2]rotaxanes. From the kinetic profiles of the deslippage, it turned out that the maximum yield of [2]rotaxane was estimated to be 94 %. Thermodynamic studies and NOESY analyses of such rotaxanes revealed that [2]rotaxanes are specially stabilized, and that the dissociation capability of the [3]rotaxanes to the components can be adjusted by controlling the structure of the end groups, direction of the CD groups, and length of the alkylene axle.     

Synthesis and photophysical investigation of squaraine rotaxanes by "clicked capping"

Pseudorotaxane complexes of squaraine dyes and tetralactam macrocycles are converted into permanently interlocked rotaxane structures using copper-catalyzed and copper-free cycloaddition reactions with bulky stopper groups. The photophysical properties of the encapsulated squaraine depend on the structure of the macrocycle. In one case, squaraine rotaxanes are produced in near-quantitative yields and with intense near-IR fluorescence. In another case, squaraine fluorescence is greatly diminished upon macrocyclic encapsulation but the signal can be restored by dye displacement with anions.     

Effects of Axle‐Core,Macrocycle, and Side‐Station Structures on the Threading and Hydrolysis Processes of Imine‐Bridged Rotaxanes

Imine‐bridged rotaxanes are a new type of rotaxane in which the axle and macrocyclic ring are connected by imine bonds. We have previously reported that in imine‐bridged rotaxane 5 , the shuttling motion of the macrocycle could be controlled by changing the temperature. In this study, we investigated how the axle and macrocycle structures affect the construction of the imine‐bridged rotaxane as well as the dynamic equilibrium between imine‐bridged rotaxane 5 and [2]rotaxane 7 by using various combinations of axles ( 1 A , B ), macrocycles ( 2 a – e ), and side‐stations (XYL and TEG). In the threading process, the flexibility of the macrocycle and the substituent groups at the para position of the aniline moieties affect the preparation of the threaded imines. The size of the imine‐bridging station and the macrocyclic tether affects the hydrolysis of the imine bonds under acidic conditions.     

Dynamic covalent approach to [2]- and [3]roxtanes by utilizing a reversible thiol-disulfide interchange reaction

A dynamic covalent approach to disulfide-containing [2]- and [3]rotaxanes is described. Symmetrical dumbbell-shaped compounds with two secondary ammonium centers and a central located disulfide bond were synthesized as components of rotaxanes. The rotaxanes were synthesized from the dumbbell-shaped compounds and dibenzo-[24]crown-8 (DB24C8) with catalysis by benzenethiol. The yields of isolated rotaxanes reached about 90 % under optimized conditions. A kinetic study on the reaction forming [2]rotaxane 2 a and [3]rotaxane 3 a suggested a plausible reaction mechanism comprising several steps, including 1) initiation, 2) [2]rotaxane formation, and 3) [3]rotaxane formation. The whole reaction was found to be reversible in the presence of thiols, and thermodynamic control over product distribution was thus possible by varying the temperature, solvent, initial ratio of substrates, and concentration. The steric bulk of the end-capping groups had almost no influence on rotaxane yields, but the structure of the thiol was crucial for reaction rates. Amines and phosphines were also effective as catalysts. The structural characterization of the rotaxanes included an X-ray crystallographic study on [3]rotaxane 3 a.     

Synthesis of a pH‐Sensitive Hetero[4]Rotaxane Molecular Machine that Combines [c2]Daisy and [2]Rotaxane Arrangements

The synthesis of a novel pH‐sensitive hetero[4]rotaxane molecular machine through a self‐sorting strategy is reported. The original tetra‐interlocked molecular architecture combines a [c2]daisy chain scaffold linked to two [2]rotaxane units. Actuation of the system through pH variation is possible thanks to the specific interactions of the dibenzo‐24‐crown‐8 (DB24C8) macrocycles for ammonium, anilinium, and triazolium molecular stations. Selective deprotonation of the anilinium moieties triggers shuttling of the unsubstituted DB24C8 along the [2]rotaxane units.     

1]rotaxanes and pretzelanes: synthesis, chirality, and absolute configuration [In Process Citation

The synthesis of aliphatically bridged [1](n)rotaxanes and (n)pretzelanes in preparative yields and the dependency of their chiroptical properties on the length (n) of their bridge are reported. A cycloenantiomeric bis(sulphonamide)[2]rotaxane with a sulphonamide group in its axle and its wheel was intramolecularly dialkylated by homologous bifunctional oligomethylene reagents to form chiral [1](n)rotaxanes bearing bridges of different lengths (n) between the axle and the wheel. Intramolecular dialkylation by 1,omega-dibromoalkanes of a topologically chiral bis(sulphonamide)[2]catenane with a sulphonamide group in both of the macrolactam rings leads to pretzel shaped molecules ((n)pretzelanes) with homologous bridges between the two macrocycles. Their yields decrease with decreasing length of the bridge. The shortest bridge isolated so far in reasonable amounts consists of six methylene groups ((6)pretzelane). Remarkably, a covalent connection of axle and wheel in a [2]rotaxane was successful even with much shorter bridges-down to only three methylene groups ([1](3)rotaxane). The structural changes of the [1](n)rotaxanes with decreasing bridge length is expressed by an increasing high-field shift in the 1H NMR spectra. Enantiomeric resolution of the racemates of both series was achieved in seven cases for the [1](n)rotaxanes and two for the (n)pretzelanes by use of chiral HPLC columns. The circular dichrograms of both compound families show a strong dependency on the length of the bridge. However, the shortest bridges displayed some additional unexpected deviations. A new specification of the absolute configuration of supramolecules, such as [n]catenanes, [n]rotaxanes and (n)pretzelanes is introduced together with some nomenclature additions.     

Threading-followed-by-shrinking protocol for the synthesis of a [2]rotaxane incorporating a Pd(II)-salophen moiety

This communication describes a new protocol for the construction of [2]rotaxanes: "threading-followed-by-shrinking". This approach involves the threading of a rodlike unit through a crown ether-like macrocycle and then shrinking the size of the macrocycle's cavity through coordination of a transition-metal ion by a salophen moiety in the macrocycle. The self-assembly of the macrocycle and a thread, followed by addition of palladium acetate, afforded the [2]rotaxane, which contains a palladium(II)-salophen moiety, after counterion exchange. This [2]rotaxane was characterized fully by NMR and IR spectroscopic, mass spectrometric, and elemental and X-ray crystallographic analyses.     

Efficient potassium-ion-templated synthesis and controlled destruction of [2]rotaxanes based on cascade complexes

The triptycene-based macrotricyclic host can form pseudorotaxane-like cascade complexes with anthraquinone and its tetra-azide terminally functionalized derivative in the presence of potassium ions, which subsequently resulted in the synthesis of three novel potassium-ion-templated [2]rotaxanes 10-12 in high yields by the "threading followed by stoppering" approach. Since the potassium ions act not only as templates during the stoppering reactions but also as nonslipping chocks to shrink the inner diameter of the wheel cavity, the deslipping behaviors of the [2]rotaxanes with different triazole stoppers by peeling off the potassium ions with 18-crown-6 were further investigated. The results show that rotaxanes 10 and 11 can be destroyed, but under the same conditions the dumbbell and ring components of rotaxane 12 remain interlocked.     

Chiral [1]Rotaxanes: X‐Ray Structures and Chiroptical Properties

New chiral [1]rotaxanes with aromatic bridges were prepared in yields up to 72% starting from a [2]rotaxane with sulfonamide groups in wheel and axle. The X‐ray structures of the parent [2]rotaxane 1 and of the three [1]rotaxanes 3e , g , h were solved which show networks of H‐bonds between wheel and axle. The separation of the racemic mixtures of four of the [1]rotaxanes, i.e., of 3a , b , d , e , was possible with HPLC on Chiralcel OD. The aromatic chromophores in the bridges lead to a considerable enhancement of the intensities of the molar CD as compared to the analogues with aliphatic bridges. In one case ( 3d ), the Cotton effects are as strong as those usually found in helicenes.     

Determining the intracellular transport mechanism of a cleft-[2]rotaxane

Rotaxanes are a class of interlocked compounds that have been extensively investigated for their potential utility as switches or sensors. We recently demonstrated that rotaxanes have further application as agents that transport material into cells. This novel finding prompted our investigation into the mechanism by which rotaxanes are involved in transmembrane transport. Two-dimensional NMR analysis showed that a cleft-containing rotaxane exists in two dominant conformations ("closed" and "open"). To determine the importance of conformational flexibility on the ability of the rotaxanes to bind guests and transport material into cells, the rotaxane was chemically modified to lock it in the closed conformation. Charged guests interact less favorably with the locked rotaxane, as compared to the unmodified rotaxane, both in an aqueous solution and in DMSO. In a chloroform solution, both rotaxanes bind the guests with similar affinities. The locked rotaxane exhibited a reduced capacity to transport a fluoresceinated peptide into cells, whereas the unmodified rotaxane efficiently delivers the peptide. Flow cytometry experiments demonstrated that a high percentage of the cells contained the delivered peptide (89-98%), the level of delivery is concentration dependent, and the rotaxanes and peptide have low toxicity. Cellular uptake of the peptide was largely temperature and ATP independent, suggesting that the rotaxane-peptide complex passes through the cellular membrane without requiring active cell-mediated processes. The results show that the sliding motion of the wheel is necessary for the delivery of materials into cells and can enhance the association of guests. These studies demonstrate the potential for rotaxanes as a new class of mechanical devices that deliver a variety of therapeutic agents into targeted cell populations.     

High-yield diastereoselective synthesis of planar chiral [2]- and [3]rotaxanes constructed from per-ethylated pillar[5]arene and pyridinium derivatives

Planar chiral [2]- and [3]rotaxanes constructed from pillar[5]arenes as wheels and pyridinium derivatives as axles were obtained in high yield using click reactions. The process of rotaxane formation was diastereoselective; the obtained [2]rotaxane was a racemic mixture consisting of (pS, pS, pS, pS, pS) and (pR, pR, pR, pR, pR) forms of the per-ethylated pillar[5]arene (C2) wheel, and other possible types of the [2]rotaxane did not form. Isolation of the enantiopure [2]rotaxanes with one axle through (pS, pS, pS, pS, pS)-C2 or (pR, pR, pR, pR, pR)-C2 wheels was accomplished. Furthermore, pillar[5]arene-based [3]rotaxane was successfully synthesized by attachment of two pseudo [2]rotaxanes onto a bifunctional linker. [3]Rotaxane formed in a 1:2:1 mixture with one axle threaded through two (pS, pS, pS, pS, pS)-C2, one (pS, pS, pS, pS, pS)-C2 and one (pR, pR, pR, pR, pR)-C2 (meso form), or two (pR, pR, pR, pR, pR)-C2 wheels. The [3]rotaxane enantiomers and the meso form were successfully isolated using appropriate chiral HPLC column chromatography. The procedure developed in this study is the starting point for the creation of pillar[5]arene-based interlocked molecules.     

Quantitative conformational study of redox-active [2]rotaxanes, part 1: Methodology and application to a model [2]rotaxane

This paper reports a novel methodology for the conformational analysis of [2]rotaxanes. It combines NMR spectroscopic (COSY, NOESY and the recently reported paramagnetic line-broadening and suppression technique) and electrochemical techniques to enable a quantitative analysis of the co-conformations of interlocked molecules and the conformations of their components. This methodology was used to study a model [2]rotaxane in solution. This [2]rotaxane consists of an axle that incorporates an electron-poor, doubly positively charged viologen that threads an electron-rich crown ether. It has been shown that the axle of the [2]rotaxane in its dicationic state adopts a folded conformation in solution and the crown ether is localised at the viologen moiety. Following a one-electron reduction of viologen, the paramagnetic radical cation of the [2]rotaxane retains its folded conformation in solution. The data also demonstrate that in the radical cation the crown ether remains localised at the viologen, despite its reduced affinity for the singly reduced viologen. The combined quantitative NMR spectroscopic and electrochemical characterisation of the electromechanical function of the model [2]rotaxane in solution provides an important reference point for the study of switching in structurally related bistable [2]rotaxanes, which is the subject of the second part of this work.