硫鸟嘌呤修饰的Mn:ZnS QDs磷光探针检测铂(Ⅲ)

通过水相合成法制备了硫鸟嘌呤(TG)修饰的锰掺杂硫化锌量子点(TG-Mn:ZnS QDs)。加入Pt⁴⁺后,Pt⁴⁺会与硫鸟嘌呤上的氮原子结合形成N-Pt⁴⁺配位结构附着在TG-Mn:ZnS QDs的表面,随着Pt⁴⁺浓度的增加,TG-Mn:ZnS QDs-Pt⁴⁺体系发生电子转移而导致磷光逐渐被猝灭,基于此构建了检测Pt⁴⁺的磷光探针。实验中考察了p H、时间对Pt⁴⁺猝灭TG-Mn:ZnS QDs磷光强度的影响。在最佳实验条件下,Pt⁴⁺浓度在0.06~2.4μg/mL范围内与TG-Mn:ZnS QDs的磷光强度呈良好的线性关系y=0.0884x+0.2319,R²=0.991,方法检出限(3σ/n)为1.3μg/mL。该磷光探针适用于实际样品中Pt⁴⁺含量的测定。     

Turn‐On Luminescent Probes for the Real‐Time Monitoring of Endogenous Hydroxyl Radicals in Living Cells

The utilization of semiconductor quantum dots (QDs) as optical labels for biosensing and biorecognition has made substantial progress. However, the development of a suitable QD‐based luminescent probe that is capable of detecting individual reactive oxygen species (ROS) represents a great challenge, mainly because the fluorescence of QDs is quenched by a wide variety of ROS. To overcome this limitation, a novel QD‐based turn‐on luminescent probe for the specific detection of ^.OH has been designed, and its application in monitoring the endogenous release of ^.OH species in living cells is demonstrated. Metal citrate complexes on the surfaces of the QDs can act as electron donors, injecting electrons into the LUMO of the QDs, while ^.OH can inject holes into the HOMO of the QDs. Accordingly, electron–hole pairs are produced, which could emit strong luminescence by electron–hole recombination. Importantly, this luminescent probe does not respond to other ROS.     

Synthesis of Multifunctional Mn‐Doped CdTe/ZnS Core/Shell Quantum Dots

The synthesis of a novel water‐soluble Mn‐doped CdTe/ZnS core‐shell quantum dots using a proposed ultrasonic assistant method and 3‐mercaptopropionic acid (MPA) as stabilizer is descried. To obtain a high luminescent intensity, post‐preparative treatments, including the pH value, reaction temperature, reflux time and atmosphere, have been investigated. For an excellent fluorescence of Mn‐doped CdTe/ZnS, the optimal conditions were pH 11, reflux temperature 100°C and reflux time 3 h under N₂ atmosphere. While for phosphorescent Mn‐doped CdTe/ZnS QDs, the synthesis at pH 11, reflux temperature 100°C and reflux time 3 h under air atmosphere gave the best strong phosphorescence. The characterizations of Mn‐doped CdTe/ZnS QDs were also identified using AFM, IR, powder XRD and thermogravimetric analysis. The data indicated that the photochemical stability and the photoluminescence of CdTe QDs are greatly enhanced by the outer inorganic ZnS shell, and the doping Mn²⁺ ions in the as‐prepared quantum dots contribute to strong luminescence. The strong luminescence of Mn‐doped CdTe/ZnS QDs reflected that Mn ions act as recombination centers for the excited electron‐hole pairs, attributing to the transition from the triplet state (⁴T₁) to the ground state (⁶A₁) of the Mn²⁺ ions. All the experiments demonstrated that the surface states played important roles in the optical properties of Mn‐doped CdTe/ZnS core‐shell quantum dots.     

Sensing during In Situ Growth of Mn‐Doped ZnS QDs: A Phosphorescent Sensor for Detection of H2S in Biological Samples

Monitoring the in situ growth of Mn‐doped ZnS quantum dots is shown to be a route to selectively detect H₂S, an important endogenously produced signalling molecule. The use of Mn²⁺ as a dopant resulted in orange phosphorescence, making it possible to avoid the background fluorescence from biological surroundings that can occur at other wavelengths. The choice of ZnS QDs as the host material ensured selectivity, since only sulfide can precipitate Zn²⁺ and Mn²⁺ from aqueous solution.     

ZnS:Mn/ZnS量子点在DNA定量分析中的应用

以巯基乙酸为稳定剂,采用成核掺杂的方法在水溶液中一步制备得到具有核壳结构的ZnS:Mn/ZnS量子点.研究了荧光、室温磷光产生的机理.基于DNA对量子点发光的增强效应,以ZnS:Mn/ZnS量子点作为标记探针建立了测定DNA的荧光、室温磷光的分析方法.考察了量子点浓度、EDC/NHS用量和反应时间等条件对DNA测定的影...     

Luminescence Enhancement based Sensing of L‐Cysteine by Doped Quantum Dots

The interaction of a presynthesized orange emitting Mn²⁺‐doped ZnS quantum dots (QDs) with L‐Cysteine (L?Cys) led to enhance emission intensity (at 596 nm) and quantum yield (QY). Importantly, the Mn²⁺‐doped ZnS QDs exhibited high sensitivity towards L?Cys, with a limit of detection of 0.4±0.02 μM (in the linear range of 3.3–13.3 μM) and high selectivity in presence of interfering amino acids and metal ions. The association constant of L?Cys was determined to be 0.36×10⁵ M^?1. The amplified passivation of the surface of Mn²⁺‐doped ZnS QDs following the incorporation and binding of L?Cys is accounted for the enhancement in their luminescence features. Moreover, the luminescence enhancement‐based detection will bring newer dimension towards sensing application.     

Doped zinc sulfide quantum dots based phosphorescence turn-off/on probe for detecting histidine in biological fluid

We report a turn-on phosphorescence probe for detection of histidine based on Co²⁺-adsorbed N-acetyl-l-cysteine (NAC) capped Mn: ZnS quantum dots (QDs) which is directly synthesized by the hydrothermal method. The phosphorescence of NAC-Mn: ZnS QDs is effectively quenched by Co²⁺ attributing to the adsorption of Co²⁺ onto the surface of QDs with a concomitant in suppressing the recombination process of hole and electron of QDs. The phosphorescence of Co²⁺-adsorbed NAC-Mn: ZnS QDs can be recovered by binding of Co²⁺ with histidine. The quenching and regeneration of the phosphorescence of NAC-Mn: ZnS QDs have been studied in detail. The as-prepared QDs-based probe is applied to determine histidine with a linear range of 1.25–30 μM and a detection limit of 0.74 μM. The relative standard deviation for eleven repeat detections of 20 μM histidine is 0.65%. Co²⁺-adsorbed NAC-Mn: ZnS QDs show high sensitivity and good selectivity to histidine over other amino acids, metal ions and co-existing substances. The proposed QDs probe has been successfully applied to determination of histidine in human urine samples with good recoveries of 98.5–103%.     

Auger Ionization Beats Photo‐Oxidation of Semiconductor Quantum Dots: Extended Stability of Single‐Molecule Photoluminescence

Despite the bright and tuneable photoluminescence (PL) of semiconductor quantum dots (QDs), the PL instability induced by Auger recombination and oxidation poses a major challenge in single‐molecule applications of QDs. The incomplete information about Auger recombination and oxidation is an obstacle in the resolution of this challenge. Here, we report for the first time that Auger‐ionized QDs beat self‐sensitized oxidation and the non‐digitized PL intensity loss. Although high‐intensity photoactivation insistently induces PL blinking, the transient escape of QDs into the ultrafast Auger recombination cycle prevents generation of singlet oxygen (¹O₂) and preserves the PL intensity. By the detection of the NIR phosphorescence of ¹O₂ and evaluation of the photostability of single QDs in aerobic, anaerobic, and ¹O₂ scavenger‐enriched environments, we disclose relations of Auger ionization and ¹O₂‐mediated oxidation to the PL stability of single QDs, which will be useful during the formulation of QD‐based single‐molecule imaging tools and single‐photon devices.     

Protein‐Directed Synthesis of Mn‐Doped ZnS Quantum Dots: A Dual‐Channel Biosensor for Two Proteins

Proteins typically have nanoscale dimensions and multiple binding sites with inorganic ions, which facilitates the templated synthesis of nanoparticles to yield nanoparticle–protein hybrids with tailored functionality, water solubility, and tunable frameworks with well‐defined structure. In this work, we report a protein‐templated synthesis of Mn‐doped ZnS quantum dots (QDs) by exploring bovine serum albumin (BSA) as the template. The obtained Mn‐doped ZnS QDs give phosphorescence emission centered at 590 nm, with a decay time of about 1.9 ms. A dual‐channel sensing system for two different proteins was developed through integration of the optical responses (phosphorescence emission and resonant light scattering (RLS)) of Mn‐doped ZnS QDs and recognition of them by surface BSA phosphorescent sensing of trypsin and RLS sensing of lysozyme. Trypsin can digest BSA and remove BSA from the surface of Mn‐doped ZnS QDs, thus quenching the phosphorescence of QDs, whereas lysozyme can assemble with BSA to lead to aggregation of QDs and enhanced RLS intensity. The detection limits for trypsin and lysozyme were 40 and 3 nM , respectively. The selectivity of the respective channel for trypsin and lysozyme was evaluated with a series of other proteins. Unlike other protein sensors based on nanobioconjugates, the proposed dual‐channel sensor employs only one type of QDs but can detect two different proteins. Further, we found the RLS of QDs can also be useful for studying the BSA–lysozyme binding stoichiometry, which has not been reported in the literature. These successful biosensor applications clearly demonstrate that BSA not only serves as a template for growth of Mn‐doped ZnS QDs, but also impacts the QDs for selective recognition of analyte proteins.     

Aptamer‐Based Turn‐On Detection of Thrombin in Biological Fluids Based on Efficient Phosphorescence Energy Transfer from Mn‐Doped ZnS Quantum Dots to Carbon Nanodots

This paper presents the first example of a sensitive, selective, and stable phosphorescent sensor based on phosphorescence energy transfer (PET) for thrombin that functions through thrombin–aptamer recognition events. In this work, an efficient PET donor–acceptor pair using Mn‐doped ZnS quantum dots labeled with thrombin‐binding aptamers (TBA QDs) as donors, and carbon nanodots (CNDs) as acceptors has been constructed. Due to the π–π stacking interaction between aptamer and CNDs, the energy donor and acceptor are taken into close proximity, leading to the phosphorescence quenching of donors, TBA QDs. A maximum phosphorescence quenching efficiency as high as 95.9 % is acquired. With the introduction of thrombin to the “off state” of the TBA‐QDs‐CNDs system, the phosphorescence is “turned on” due to the formation of quadruplex‐thrombin complexes, which releases the energy acceptor CNDs from the energy donors. Based on the restored phosphorescence, an aptamer‐based turn‐on thrombin biosensor has been demonstrated by using the phosphorescence as a signal transduction method. The sensor displays a linear range of 0–40 nM for thrombin, with a detection limit as low as 0.013 nM in pure buffers. The proposed aptasensor has also been used to monitor thrombin in complex biological fluids, including serum and plasma, with satisfactory recovery ranging from 96.8 to 104.3 %. This is the first time that Mn‐doped ZnS quantum dots and CNDs have been employed as a donor–acceptor pair to construct PET‐based biosensors, which combines both the photophysical merits of phosphorescence QDs and the superquenching ability of CNDs and thus affords excellent analytical performance. We believe this proposed method could pave the way to a new design of biosensors using PET systems.     

Versatile Room‐Temperature‐Phosphorescent Materials Prepared from N‐Substituted Naphthalimides: Emission Enhancement and Chemical Conjugation

Purely organic materials with room‐temperature phosphorescence (RTP) are currently under intense investigation because of their potential applications in sensing, imaging, and displaying. Inspired by certain organometallic systems, where ligand‐localized phosphorescence (³π‐π*) is mediated by ligand‐to‐metal or metal‐to‐ligand charge transfer (CT) states, we now show that donor‐to‐acceptor CT states from the same organic molecule can also mediate π‐localized RTP. In the model system of N‐substituted naphthalimides (NNIs), the relatively large energy gap between the NNI‐localized ¹π‐π* and ³π‐π* states of the aromatic ring can be bridged by intramolecular CT states when the NNI is chemically modified with an electron donor. These NNI‐based RTP materials can be easily conjugated to both synthetic and natural macromolecules, which can be used for RTP microscopy.     

Determination of Glucose by Affinity Adsorption Solid Substrate‐room Temperature Phosphorimetry Based on Triticum Vulgare Lectin Labeled with Silicon Dioxide Nanoparticle Containing Fluorescein Isothiocyanate

In the presence of heavy atom perturber Pb2＋, silicon dioxide nanoparticle containing fluorescein isothiocyanate (FITC-SiO2) could emit a strong and stable room temperature phosphorescence (RTP) signal on the surface of acetyl cellulose membrane (ACM). It was found in the research that a quantitative specific affinity adsorption (AA) reaction between triticum vulgare lectin (WGA) labeled with luminescent nanoparticle and glucose (G) could be carried on the surface of ACM. The product (WGA-G-WGA-FITC-SiO2) of the reaction could emit a stronger RTP signal, and the ΔIp had linear correlation to the content of G. According to the facts above, a new method to determine G by affinity adsorption solid substrate room temperature phosphorimetry (AA-SS-RTP) was established, based on WGA labeled with FITC-SiO2. The detection limit (LD) of this method calculated by 3Sb/k was 0.47 pg•spot－1 (corresponding to a concentration value 1.2×10－9 g•mL－1, namely 5.3×10－9 mol•L－1), the sensitivity was high. Meanwhile, the mechanism for the determination of G by AA-SS-RTP was discussed.     

Long‐Lived Charge Carriers in Mn‐Doped CdS Quantum Dots for Photoelectrochemical Cytosensing

Photoelectrochemical (PEC) biosensing with semiconductor quantum dots (QDs) has received great attention because it integrates the advantages of both photo‐excitation and electrochemical detection. During the photon‐to‐electricity conversion in PEC processes, electron–hole (charge) separation competes with electron–hole recombination, and the net effect essentially determines the performance of PEC biosensors. Herein, we propose a new approach for slowing down electron–hole recombination to increase charge separation efficiency for PEC biosensor development. Through doping with Mn²⁺, a pair of d bands (⁴T₁ and ⁶A₁) is inserted between the conduction and valence bands of CdS QDs, which alters the electron–hole separation and recombination dynamics, allowing the generation of long‐lived charge carriers with ms‐scale lifetime that decay about 10⁴–10⁵‐fold more slowly than in the case of undoped QDs. Photocurrent tests indicated that Mn²⁺ doping resulted in an approximately 80 % increase in photocurrent generation compared with undoped CdS QDs. For application, the Mn‐doped CdS QDs were coated on the surface of a glassy carbon electrode and functionalized with a cell surface carbohydrate‐specific ligand (3‐aminophenylboronic acid). In this way, a sensitive cytosensor for K562 leukemia cells was constructed. Moreover, the sugar‐specific binding property of 3‐aminophenylboronic acid allowed the electrode to serve as a switch for the capture and release of cells. This has been further explored with a view to developing a reusable PEC cytosensing platform.     

Carbon Dots in a Matrix: Energy‐Transfer‐Enhanced Room‐Temperature Red Phosphorescence

High‐efficiency red room‐temperature phosphorescence (RTP) emissions have been achieved by embedding carbon dots (CDs) in crystalline Mn‐containing open‐framework matrices. The rationale of this strategy relies on two factors: 1) the carbon source, which affects the triplet energy levels of the resulting CDs and thus the spectral overlap and 2) the coordination geometry of the Mn atoms in the crystalline frameworks, which determines the crystal‐field splitting and thus the emission spectra. Embedding the carbon dots into a matrix with 6‐coordinate Mn centers resulted in a strong red RTP with a phosphorescence efficiency of up to 9.6 %, which is higher than that of most reported red RTP materials. The composite material has an ultrahigh optical stability in the presence of strong oxidants, various organic solvents, and strong ultraviolet radiation. A green‐yellow RTP composite was also prepared by using a matrix with 4‐coordinate Mn centers and different carbon precursors.     

Phenoxazine‐based Near‐infrared Fluorescent Probes for the Specific Detection of Copper (II) Ions in Living Cells

Abstract : It is well known that copper ions play a critical role in various physiological processes. However, a variety of human diseases are tightly correlated with copper overload. Although there are numerous fluorescent probes capable of detecting copper ions, most of them are “turn‐off” probes owing to copper (II) ions fluorescence quenching effect, resulting in poor sensitivity. Herein, a novel “turn‐on” near‐infrared (NIR) fluorescent probe PZ‐N based on phenoxazine was designed and synthesized for the selective detection of copper (II) ions (Cu²⁺). Upon the addition of Cu²⁺, the probe could quickly react with Cu²⁺ and emit strong fluorescence, along with colour change from colourless to obvious blue. Moreover, the probe PZ‐N showed good water solubility, high selectivity, and excellent sensitivity with low limit of detection (1.93 nM) towards copper (II) ions. More importantly, PZ‐N was capable of effectively detecting Cu²⁺ in living cells.     

Interaction Modes and Absolute Affinities of α‐Amino Acids for Mn2+: A Comprehensive Picture

Manganese is involved as a cofactor in the activation of numerous enzymes as well as the oxygen‐evolving complex of photosystem II. Full understanding of the role played by the Mn²⁺ ion requires detailed knowledge of the interaction modes and energies of manganese with its various environments, a knowledge that is far from complete. To bring detailed insight into the local interactions of Mn in metallopeptides and proteins, theoretical studies employing first‐principles quantum mechanical calculations are carried out on [Mn‐amino acid]²⁺ complexes involving all 20 natural α‐amino acids (AAs). Detailed investigation of [Mn‐serine]²⁺_, [Mn‐cysteine]²⁺, [Mn‐phenylalanine]²⁺, [Mn‐tyrosine]²⁺, and [Mn‐tryptophan]²⁺ indicates that with an electron‐rich side chain, the most stable species involves interaction of Mn²⁺ with carbonyl oxygen, amino nitrogen, and an electron‐rich section of the side chain of the AA in its canonical form. This is in sharp contrast with aliphatic side chains for which a salt bridge is formed. For aromatic AAs, complexation to manganese leads to partial oxidation as well as aromaticity reduction. Despite multisite binding, AAs do not generate strong enough ligand fields to switch the metal to a low‐ or even intermediate‐spin ground state. The affinities of Mn²⁺ for all AAs are reported at the B3LYP and CCSD(T) levels of theory, thereby providing the first complete series of affinities for a divalent metal ion. The trends are compared with those of other cations for which affinities of all AAs have been previously obtained.     

In‐situ XAFS Studies of Mn12 Molecular‐Cluster Batteries: Super‐Reduced Mn12 Clusters in Solid‐State Electrochemistry

In situ X‐ray absorption fine structure (XAFS) analyses were performed on rechargeable molecular cluster batteries (MCBs), which were formed by a lithium anode and cathode‐active material, [Mn₁₂O₁₂(CH₃CH₂C(CH₃)₂COO)₁₆(H₂O)₄] with tert‐pentyl carboxylate ligand (abbreviated as Mn12tPe), and with eight Mn³⁺ and four Mn⁴⁺ centers. This mixed valence cluster compound is used in an effort to develop a reusable in situ battery cell that is suitable for such long‐term performance tests. The Mn12tPe MCBs exhibit a large capacity of approximately 210 Ah kg⁻¹ in the voltage range V=4.0–2.0 V. The X‐ray absorption near‐edge structure (XANES) spectra exhibit a systematic change during the charging/discharging with an isosbestic point at 6555 eV, which strongly suggests that only either the Mn³⁺ or Mn⁴⁺ ions in the Mn12 skeleton are involved in this battery reaction. The averaged manganese valence, determined from the absorption‐edge energy, decreased monotonically from 3.3 to 2.5 in the first half of the discharging (4.0>V>2.8 V), but changed little in the second half (2.8>V>2.0 V). The former valence change indicates a reduction of the initial [Mn12]⁰ state by approximately ten electrons, which corresponds well with the half value of the observed capacity. Therefore, the large capacity of the Mn12 MCBs can be understood as being due to a combination of the redox change of the manganese ions and presumably a capacitance effect. The extended X‐ray absorption fine structure (EXAFS) indicates a gradual increase of the Mn²⁺ sites in the first half of the discharging, which is consistent with the XANES spectra. It can be concluded that the Mn12tPe MCBs would include a solid‐state electrochemical reaction, mainly between the neutral state [Mn12]⁰ and the super‐reduced state [Mn12]⁸⁻ that is obtained by a local reduction of the eight Mn³⁺ ions in Mn12 toward Mn²⁺ ions.     

A new two‐dimensional manganese(II) coordination polymer based on thiophene‐3,4‐dicarboxylic acid

A novel manganese coordination polymer, poly[(μ₅‐thiophene‐3,4‐dicarboxylato)manganese(II)], [Mn(C₆H₂O₄S)]_n, was synthesized hydrothermally using 3,4‐thiophenedicarboxylate (3,4‐tdc²⁻) as the organic linker. The asymmetric unit of the complex contains an Mn²⁺ cation and one half of a deprotonated 3,4‐tdc²⁻ anion, both residing on a twofold axis. Each Mn²⁺ centre is six‐coordinated by O atoms of bridging/chelating carboxylate groups from five 3,4‐tdc²⁻ anions, forming a slightly distorted octahedron. The Mn²⁺ centres are bridged by 3,4‐tdc²⁻ anions to give an infinite two‐dimensional layer which incorporates one‐dimensional Mn–O gridlike chains, and in which the 3,4‐tdc²⁻ anion adopts a novel hexadentate chelating and μ₅‐bridging coordination mode. The fully deprotonated 3,4‐tdc²⁻ anion exhibits unexpected efficiency as a ligand towards the Mn²⁺ centres, which it coordinates through all of its carboxylate O atoms to provide the novel coordination mode. The IR spectrum of the complex is also reported.     

Catalytic Molecular Imaging of MicroRNA in Living Cells by DNA‐Programmed Nanoparticle Disassembly

Molecular imaging is an essential tool for disease diagnostics and treatment. Direct imaging of low‐abundance nucleic acids in living cells remains challenging because of the relatively low sensitivity and insufficient signal‐to‐background ratio of conventional molecular imaging probes. Herein, we report a class of DNA‐templated gold nanoparticle (GNP)–quantum dot (QD) assembly‐based probes for catalytic imaging of cancer‐related microRNAs (miRNA) in living cells with signal amplification capacity. We show that a single miRNA molecule could catalyze the disassembly of multiple QDs with the GNP through a DNA‐programmed thermodynamically driven entropy gain process, yielding significantly amplified QD photoluminescence (PL) for miRNA imaging. By combining the robust PL of QDs with the catalytic amplification strategy, three orders of magnitude improvement in detection sensitivity is achieved in comparison with non‐catalytic imaging probe, which enables facile and accurate differentiation between cancer cells and normal cells by miRNA imaging in living cells.     

DNA‐Templated Assembly of a Heterobivalent Quantum Dot Nanoprobe For Extra‐ and Intracellular Dual‐Targeting and Imaging of Live Cancer Cells

Quantum dots (QDs) hold great promise for the molecular imaging of cancer because of their superior optical properties. Although cell‐surface biomarkers can be readily imaged with QDs, non‐invasive live‐cell imaging of critical intracellular cancer markers with QDs is a great challenge because of the difficulties in the automatic delivery of QD probes to the cytosol and the ambiguity of intracellular targeting signals. Herein, we report a new type of DNA‐templated heterobivalent QD nanoprobes with the ability to target and image two spatially isolated cancer markers (nucleolin and mRNA) present on the cell surface and in the cell cytosol. Bypassing endolysosomal sequestration, this type of QD nanoprobes undergo macropinocytosis following the nucleolin targeting and then translocate to the cytosol for mRNA targeting. Fluorescence resonance energy transfer (FRET) based confocal microscopy enables unambiguous signal deconvolution of mRNA‐targeted QD nanoprobes inside cancer cells.