Progress in Hyperpolarized Ultrafast 2D NMR Spectroscopy

An important development in the field of NMR spectroscopy has been the advent of hyperpolarization approaches, capable of yielding nuclear spin states whose value exceeds by orders‐of‐magnitude what even the highest‐field spectrometers can afford under Boltzmann equilibrium. Included among these methods is an ex situ dynamic nuclear polarization (DNP) approach, which yields liquid‐phase samples possessing spin polarizations of up to 50 %. Although capable of providing an NMR sensitivity equivalent to the averaging of about 1 000 000 scans, this methodology is constrained to extract its “superspectrum” within a single—or at most a few—transients. This makes it a poor starting point for conventional 2D NMR acquisition experiments, which require a large number of scans that are identical to one another except for the increment of a certain t₁ delay. It has been recently suggested that by merging this ex situ DNP approach with spatially encoded “ultrafast” methods, a suitable starting point could arise for the acquisition of 2D spectra on hyperpolarized liquids. Herein, we describe the experimental principles, potential features, and current limitations of such integration between the two methodologies. For a variety of small molecules, these new hyperpolarized ultrafast experiments can, for equivalent overall durations, provide heteronuclear correlation spectra at significantly lower concentrations than those currently achievable by conventional 2D NMR acquisitions. A variety of challenges still remain to be solved before bringing the full potential of this new integrated 2D NMR approach to fruition; these outstanding issues are discussed.     

电子显微技术应用于生物纳米材料表征与测试的研究进展

该文简述了电子显微技术的发展历程,并介绍了现代电子显微镜的新功能。针对生物纳米材料理化性能与功能应用的特殊性,结合研究实例,重点阐述运用电子显微结构表征与原位分析测试技术指导构建新颖纳米结构、揭示材料与细胞/组织相互作用并发挥功能的机制。并在此基础上,展望了电子显微技术在生物纳米材料研究领域的发展方向(大尺寸图像拼接、三维重构、动态原位实时成像)。     

珍珠形胆结石的红外光谱和扫描电镜分析

磁疗获得的珍珠形胆结石是罕见的病例,作者利用红外光谱、扫描电子显微镜及Ｘ射线能谱对该胆结石进行了观察和研究。结果表明该胆结石的主要成分为胆固醇,并混有少量的蛋白质和无机钙盐,说明珍珠形胆结石虽然和珍珠具有相似的形貌,但组成是完全不同的。根据扫描电子显微镜的照片,作者推测结石的珍珠外形可能是因为片状的胆固醇分子形成胆甾型晶体而形成的。     

Femtosecond Time-Resolved Spectroscopic Photoemission Electron Microscopy for Probing Ultrafast Carrier Dynamics in Heterojunctions

The fast developing semiconductor industry is pushing to shrink and speed up transistors. This trend requires us to understand carrier dynamics in semiconductor heterojunctions with both high spatial and temporal resolutions. Recently, we have successfully set up a timeresolved photoemission electron microscopy (TR-PEEM), which integrates the spectroscopic technique to measure electron densities at specific energy levels in space. This instrument provides us an unprecedented access to the evolution of electrons in terms of spatial location, time resolution, and energy, representing a new type of 4D spectro-microscopy. Here in this work, we present measurements of semiconductor performance with a time resolution of 184 fs, electron kinetic energy resolution of 150 meV, and spatial resolution of about 150 nm or better. We obtained time-resolved micro-area photoelectron spectra and energy-resolved TR-PEEM images on the Pb island on Si(111). These experimental results suggest that this instrument has the potential to be a powerful tool for investigating the carrier dynamics in various heterojunctions, which will deepen our understanding of semiconductor properties in the submicron/nanometer spatial scales and ultrafast time scales.     

Understanding J‐Modulation during Spatial Encoding for Sensitivity‐Optimized Ultrafast NMR Spectroscopy

Ultrafast (UF) NMR spectroscopy is an approach that yields 2D spectra in a single scan. This methodology has become a powerful analytical tool that is used in a large array of applications. However, UF NMR spectroscopy still suffers from an intrinsic low sensitivity, and from the need to compromise between sensitivity, spectral width, and resolution. In particular, the modulation of signal intensities by the spin–spin J‐coupling interaction (J‐modulation) impacts significantly on the intensities of the spectral peaks. This effect can lead to large sensitivity losses and even to missing spectral peaks, depending on the nature of the spin system. Herein, a general simulation package (Spinach) is used to describe J‐modulation effects in UF experiments. The results from simulations match with experimental data and the results of product operator calculations. Several methods are proposed to optimize the sensitivity in UF COSY spectra. The potential and drawbacks of the different strategies are also discussed. These approaches provide a way to adjust the sensitivity of UF experiments for a large range of applications.     

Characterization of Paint by Fourier-Transform Infrared Spectroscopy,Raman Microscopy,and Scanning Electron Microscopy-Energy Dispersive X-ray Spectroscopy

The identification of automotive coatings has become important for forensic scientists to trace suspects. Popular automotive coatings include acrylic, amino, alkyd, nitro, and polyurethane paints. Various pigments and additives are added to the coatings, which may create difficulty in characterization of paint evidence. In this study, Fourier-transform infrared spectroscopy, Raman spectroscopy and scanning electron microscopy-energy dispersive X-ray spectroscopy were used to characterize an eleven-layer paint sample. Most layers were only a few micrometers thick. Infrared spectroscopy has several advantages in identifying resins and additives, while Raman is more effective in characterizing additives and inorganic pigments. Scanning electron microscopy-energy dispersive X-ray spectroscopy provides elemental analysis information. The results reveal that the combination of these techniques provides more accurate paint identification than using them separately.     

单分散铁氧体纳米颗粒的生长机制与成分偏聚的透射电子显微研究

理解纳米晶的生长机制对单分散纳米晶的可控合成至关重要。本文以热分解法制备的双金属铁氧体(钴铁氧和锰铁氧)纳米颗粒为例,利用透射电子显微镜(TEM)系统研究了铁氧体纳米晶的生长机制,揭示了由此造成的成分偏聚现象。对不同时间阶段的反应产物的分析结果表明,两步加热法(即先后在相对低的温度和相对高的温度下加热反应)是制备高质量的单分散铁氧体纳米晶的关键;通过控制低温反应阶段的时间可实现纳米晶的形核阶段和生长阶段的有效分离,从而有利于单分散纳米晶的合成。利用扫描透射电子显微镜(STEM)及电子能量损失谱(EELS)谱学成像技术分析,我们进一步发现了双金属铁氧体纳米晶中的成分偏聚现象,表明双金属铁氧体纳米晶在形核阶段主要形成富Fe的核芯,而在生长阶段则形成更富Co/Mn的双金属铁氧体壳层。这些结果对制备高质量的单分散铁氧体纳米晶具有重要的指导意义,同时也有助于正确理解热分解法制备的铁氧体纳米晶的表面成分和相关表面物理化学性质。     

基于超快多维振动光谱技术解析分子体系的三维空间构型

超快多维振动光谱技术目前已经被广泛应用到各种凝聚态分子体系中分子的结构以及快速变化动力学过程的测量之中,并有望成为新一代解析分子体系微观结构及超快行为的常规手段。本文从两个主线出发,介绍如何利用超快多维振动光谱技术解析分子体系的三维空间构型。一方面通过测量分子内各个振动模式跃迁偶极矩间的夹角来获得分子体系内不同基团的相对空间取向,并最终确定分子的空间构型。另一方面,通过详细解析分子间振动能量转移的机理,进而将实验中测得的振动能量转移速率转化为分子之间的距离信息。     

Simultaneously Probing Two Ultrafast Condensed‐Phase Molecular Symmetry Breaking Events by Two‐Dimensional Infrared Spectroscopy

In condensed phases, a highly symmetric gas‐phase molecule lowers its symmetry under perturbation of the solvent, which is vital to a variety of structural chemistry related processes. However, the dynamical aspects of solvent‐mediated symmetry‐breaking events remain largely unknown. Herein, direct evidence for two types of solvent‐mediated symmetry‐breaking events that coexist on the picosecond timescale in a highly symmetric anion, namely, hexacyanocobaltate, is presented: 1) an equilibrium symmetry‐breaking event in which a solvent‐bound species having lowered symmetry undergoes a population exchange reaction with the symmetry‐retaining species; 2) a dynamic symmetry‐breaking event that is composed of many dynamic population‐exchange reactions under fluctuating solvent interactions. Ultrafast two‐dimensional infrared spectroscopy is used to simultaneously observe and dynamically characterize these two events. This work opens a new window into molecular symmetry and structural dynamics under equilibrium and non‐equilibrium conditions.     

Atomic Force Microscopy,Transmission Electron Microscopy,and Photon Correlation Spectroscopy: Three Techniques for Rapid Characterization of Optimized Self-Nanoemulsiying Drug Delivery System of Glibenclamide,Carvedilol, and Lovastatin

This article looks at atomic force microscopy as an important aid to characterize the self-nanoemulsifying formulation of glibenclamide, lovastatin, and carvedilol in conjunction with other sophisticated technique, viz., transmission electron microscopy and photon correlation spectroscopy. Sizes obtained by processing the atomic force microscopy (AFM) image are comparable with those obtained from transmission electron microscope. Although in the present study, the mean particle size obtained from photon correlation spectroscopy does not correlate to the findings of atomic force microscopy and transmission electron microscopy, but the poly-disperse index values correlate well with the findings of AFM and transmission electron microscopy where uniform particle size was observed in aqueous dispersion of self-nanoemulsifying formulation of glibenclamide, lovastatin, and carvedilol.     

Ultrafast dynamics of myoglobin probed by time-resolved resonance Raman spectroscopy

Recent experimental work carried out in this laboratory on the ultrafast dynamics of myoglobin (Mb) is summarized with a stress on structural and vibrational energy relaxation. Studies on the structural relaxation of Mb following CO photolysis revealed that the structural change of heme itself, caused by CO photodissociation, is completed within the instrumental response time of the time-resolved resonance Raman apparatus used (approximately 2 ps). In contrast, changes in the intensity and frequency of the iron-histidine (Fe-His) stretching mode upon dissociation of the trans ligand were found to occur in the picosecond regime. The Fe-His band is absent for the CO-bound form, and its appearance upon photodissociation was not instantaneous, in contrast with that observed in the vibrational modes of heme, suggesting appreciable time evolution of the Fe displacement from the heme plane. The band position of the Fe-His stretching mode changed with a time constant of about 100 ps, indicating that tertiary structural changes of the protein occurred in a 100-ps range. Temporal changes of the anti-Stokes Raman intensity of the v4 and v7 bands demonstrated immediate generation of vibrationally excited heme upon the photodissociation and decay of the excited populations, whose time constants were 1.1 +/- 0.6 and 1.9 +/- 0.6 ps, respectively. In addition, the development of the time-resolved resonance Raman apparatus and prospects in this research field are described.     

Orientation Imaging Microscopy for the Transmission Electron Microscope

The resolution limit of Orientation Imaging Microscopy in the Scanning Electron Microscope is between 20 nA and 80 nA depending on the basic resolution/beam current performance of the SEM, the sample atomic number and the level of residual strain within it. The newer technique of orientation imaging in the transmission electron microscope, TEM, improves on this resolution limit by a factor of five to ten. The new technique is based on a novel procedure for determining the crystallography of separate small volumes in the sample by examination of a large series of dark field images. Each image is recorded for a different diffraction condition. This is achieved by using a computer to direct the electron beam onto the same area of the sample so that it covers all directions within a cone of semi-apex angle 3 degrees. Analysis of the intensity of the same point in each of the dark field images permits reconstruction of a diffraction pattern for that point providing the data to calculate its crystal orientation. The process is repeated for each point in the image. The Orientation Image Micrograph is constructed from the orientations so determined. The technique is shown to be capable of producing orientation micrographs of high spatial resolution for unstrained samples. For highly strained samples difficulties are encountered in accurately indexing the complicated diffraction patterns that are observed. Methods to improve the indexing procedures involve determining the sub-cell structure first from a comparison of patterns from adjacent pixels and then summing all patterns belonging to a single sub-cell. The resultant improvement in pattern quality permits more reliable determination of orientation. Examples of this procedure are taken from studies of deformed aluminum.     

Emerging Electron Microscopy Techniques for Probing Functional Interfaces in Energy Materials

Interfaces play a fundamental role in many areas of chemistry. However, their localized nature requires characterization techniques with high spatial resolution in order to fully understand their structure and properties. State‐of‐the‐art atomic resolution or in situ scanning transmission electron microscopy and electron energy‐loss spectroscopy are indispensable tools for characterizing the local structure and chemistry of materials with single‐atom resolution, but they are not able to measure many properties that dictate function, such as vibrational modes or charge transfer, and are limited to room‐temperature samples containing no liquids. Here, we outline emerging electron microscopy techniques that are allowing these limitations to be overcome and highlight several recent studies that were enabled by these techniques. We then provide a vision for how these techniques can be paired with each other and with in situ methods to deliver new insights into the static and dynamic behavior of functional interfaces.     

Ultrafast Spectroscopy of Fe(II) Complexes Designed for Solar-Energy Conversion: Current Status and Open Questions

One major challenge of future sustainable photochemistry is to replace precious and rare transition metals in applications such as energy conversion or electroluminescence by earth-abundant, cheap, and recyclable materials. This involves using coordination complexes of first row transition metals such as Cu, Cr, or Mn. In the case of iron, which is attractive due to its natural abundance, fundamental limitations imposed by the small ligand field splitting energy have recently been overcome. In this review article, we briefly summarize the present knowledge and understanding of the structure-property relationships of Fe(II) and Fe(III) complexes with excited state lifetimes in the nanosecond range. However, our main focus is to examine to which extent the ultrafast spectroscopy methods used so far provided insight into the excited state structure and the photo-induced dynamics of these complexes. Driven by the main question of how to spectroscopically, i. e. in energy and concentration, differentiate the population of ligand- vs. metal-centered states, the hitherto less exploited ultrafast vibrational spectroscopy is suggested to provide valuable complementary insights.     

Time and Angle-Resolved Time-of-Flight Electron Spectroscopy for Functional Materials Science

Electron spectroscopy with the unprecedented transmission of angle-resolved time-of-flight detection, in combination with pulsed X-ray sources, brings new impetus to functional materials science. We showcase recent developments towards chemical sensitivity from electron spectroscopy for chemical analysis and structural information from photoelectron diffraction using the phase transition properties of 1T-TaS₂. Our development platform is the SurfaceDynamics instrument located at the Femtoslicing facility at BESSY II, where femtosecond and picosecond X-ray pulses can be generated and extracted. The scientific potential is put into perspective to the current rapidly developing pulsed X-ray source capabilities from Lasers and Free-Electron Lasers.     

Ultrafast Structural Fluctuations of Myoglobin‐Bound Thiocyanate and Selenocyanate Ions Measured with Two‐Dimensional Infrared Photon Echo Spectroscopy

Structural dynamics within the distal cavity of myoglobin protein is investigated using 2D‐IR and IR pump–probe spectroscopy of the N≡C stretch modes of heme‐bound thiocyanate and selenocyanate ions. Although myoglobin‐bound thiocyanate group shows a doublet in its IR absorption spectrum, no cross peaks originating from chemical exchange between the two components are observed in the time‐resolved 2D IR spectra within the experimental time window. Frequency–frequency correlation functions of the two studied anionic ligands are obtained by means of a few different analysis approaches; these functions were then used to elucidate the differences in structural fluctuation around ligand, ligand–protein interactions, and the degree of structural heterogeneity within the hydrophobic pocket of these myoglobin complexes.     

Electron Beam Induced Transformation of MoO3 to MoO2 and a New Phase MoO

The transformation of MoO₃ induced by electron beam irradiation was studied by electron energy‐loss spectroscopy (EELS) in combination with electron diffraction and high‐resolution transmission electron microscopy (HRTEM) techniques. The routes of structure transformation were dependent on the applied electron current density. In case of low current density, MoO₂ was obtained. In case of high current density, MoO with a rock‐salt structure is suggested to be the final phase. The change in oxidation states of the Mo oxides was deduced from the features in energy‐loss near edge structure (ELNES) of the O K‐edge. Quantitative analysis was successfully employed on Mo M₃‐edge and O K‐edge to obtain the O/Mo ratio of the reduced phases. The mechanisms of different structure transformation behaviors were suggested in the frame of radiolysis enhanced diffusion.