Detection of Aluminum Chlorohydrate Content in Antiperspirant Deodorants Using Screen‐Printed Silver Electrodes by One Drop Analysis

Aluminum chlorohydrate (Al₂(OH)₅Cl?2H₂O, ACH) is an active ingredient in many antiperspirants and deodorants formulation to reduce the body odors (mainly sweat) through interaction with apocrine sweat glands to produce insoluble aluminum hydroxide and free chloride, which then plugs the sweat gland that stops the flow of sweat to the skin's surface. We demonstrated here an one drop (50 μL) electrochemical sensing of the ACH using an in‐built three screen‐printed electrodes assembly containing Ag as working and pseudo reference and carbon as counter electrode system (AgSPE). The free Cl^? ion librated from ACH/H₂O reaction was detected at AgSPE surface at 0.072 V vs. pseudo Ag reference electrode system in pH 2 phosphate solution by Cyclic voltammetric Technique. Under optimal working condition the AgSPE shows a linear calibration plot in the window of 30–2000 ppm of ACH with sensitivity and regression values of 0.104 μA/ppm and 0.998 respectively. Calculated detection limit is 3.03 ppm. RSD values of intra‐ and interassays were 0.19% and 2.79% respectively. Finally, real sample (antiperspirant deodorant lotions) assays were successfully demonstrated with results comparable to the predicted values.     

Combined Voltammetric‐Potentiometric Sensor with Silver Solid Amalgam Link for Electroanalytical Measurements

An arrangement of a combined voltammetric‐potentiometric sensor (CVPS) with a silver solid amalgam link (AgSAL) was designed, comprising a working electrode inserted into an internal solution of a proper depolarizer (e.g., 10 ppm Cu(II) in 0.2 M acetate buffer, 2% tartaric acid), which is separated from the analyzed solution by the AgSAL or other amalgam links. The preparation procedure of the AgSAL was described. The sensor has been successfully tested using solutions at various concentrations of Ag(I) and Hg(II) in various types of base electrolytes, exhibiting good selectivity with respect to Ag(I) or Hg(II) ions. The proportional voltammetric current concentration dependences i_p?ln c were obtained and interpreted.     

An Arrayed Micro‐glutamate Sensor Probe Integrated with On‐probe Ag/AgCl Reference and Counter Electrodes

Complete all‐in‐one multi‐arrayed glutamate (Glut) sensors have been constructed on a silicon‐based micromachined probe composed of micro‐platinum (Pt) working electrodes, a micro‐silver/silver chloride (Ag/AgCl) reference electrode (RE), and a micro‐Pt counter electrode (CE). The OCP shift of the electrodeposited Ag/AgCl on‐probe micro‐reference electrode compared with a Ag/AgCl wire is <0.1 mV/h. The composition ratio of Ag, Cl, and Pt on the electrodeposited on‐probe micro‐reference electrode is observed to be 1.00 : 0.48 : 0.02 analyzed by EDS. The miniaturized amperometric Glut biosensors were constructed on working electrode sites (electrode area: ∼8.5×10⁻⁵ cm²) of the microprobe modified with glutamate oxidase (GlutOx) enzyme layers for the selective, fast, and continuous detection of L‐glutamate. The sensor selectivity towards common electroactive interferents has been improved significantly by coating the electrode surface with perm‐selective polymer layers, overoxidized polypyrrole (PPY) and Nafion®. The sensitivity, detection range, and response time of the proposed all‐in‐one Glut biosensors are 204.7±5.8 nA μM⁻¹ cm⁻² (N=5), 4.99–109 μM, and 2.7±0.3 sec, respectively and no interferent signals of AA and DA were observed. The sensor can be reused over 19 times of continuous repetitive operation (total measurement time: ∼4 hours) and the sensor sensitivity can retain up to four weeks of storage.     

Design and Performance of a New Thin‐Layer Radial‐Flow Holder for a Quartz Crystal Resonator of an Electrochemical Quartz Crystal Microbalance

A new compact holder for either 5‐ or 10‐MHz AT‐cut quartz crystal resonator of an electrochemical quartz crystal microbalance was designed, fabricated and characterized. The holder is a hydrodynamically controlled thin‐layer radial‐flow microelectrochemical cell. Its unique feature consists of (i) a micrometer‐screw adjustable distance between the movable coaxial assembly of the Ag/Ag⁺ pseudoreference electrode and the inlet capillary nozzle with respect to the metal‐film working electrode of the quartz crystal resonator, and (ii) a U‐clamp mountable resonator, easily accessible for change without using any tools. The inlet solution stream is centered axially against the working electrode. The holder performance was tested under different flow conditions. These include hydrodynamic voltammetry measurements on the Fe(CN) /Fe(CN) couple, i.e., a redox system with no mass transfer across the solution–electrode interface, as well as simultaneous chronoamperometry and chronoelectrogravimetry measurements under flow injection analysis (FIA) conditions on the Ag/Ag⁺ couple, i.e., a system with electrodeposition of a rigid metallic film. Moreover, simultaneous changes of resonant frequency and dynamic resistance were measured under FIA conditions for a glycerol solution, i.e., an electroinactive viscous medium. For the 30<F_m<180 μL min^?1 volume flow rate of solution and 50<d<250 μm nozzle‐to‐resonator distance, the holder operates in a thin‐layer radial‐flow regime at a fully developed laminar flow. For F_m=30 μL min^?1 and d=100 μm, both mass and charge conversion accompanying silver electrodeposition is appreciably high and close to 35%. Simultaneous measurements of the resonant frequency change and current‐potential or current‐time transients allowed investigations of electrochemical processes involving mass changes of rigid deposits while those of the frequency change and dynamic resistance change involve changes of viscoelastic properties of medium.     

Microliter Volume Determination of Cosmetic Mercury with a Partially Crosslinked Poly(4‐vinylpyridine) Modified Screen‐Printed Three‐Electrode Portable Assembly

We successfully demonstrated microliter (μL) volume determination of Mercury (Hg) using an in‐built screen‐printed three electrodes containing partially crosslinked poly(4‐vinlylpyridine) (designated as pcPVP) modified carbon‐working, carbon‐counter, and Ag⁺‐quasireference electrodes (SPE/pcPVP) in a pH 4 acetate buffer solution with 2 M KCl by using the square wave anodic stripping voltammetric (SWASV) technique. Instrumental and solution phase conditions were systematically optimized. Experiments were carried out by simply placing a 500 μL‐droplet of Hg containing real sample mixed with the base electrolyte on the SPE/pcPVP surface. The SPE/Ag⁺ quasi‐reference system shifted the Hg‐SWASV detection potential ca. 250 mV positive, but the quantitative current values were appreciably similar to that of a standard Ag/AgCl reference electrode. Under optimal condition, the calibration graph is linear in the window of 100–1000 ppb of the Hg droplet system with a detection limit of 69.5 ppb (S/N=3). Finally real sample assays were demonstrated for prohibited cosmetic Hg containing skin‐lightening agents in parallel with ICP‐OES measurements.     

Polyaniline‐Modified Silver and Binary Silver‐Cobalt Catalysts for Oxygen Reduction Reaction

Novel dendrite‐like silver particles were electrodeposited on Ti substrates from a supporting electrolyte‐free 30 mmol L^?1 Ag(NH₃)₂⁺ solution, to synthesize the den‐Ag/Ti electrode. Binary Ag_xCo_y/Ti electrodes with different Ag:Co atomic ratios were further obtained by electrodeposition of Co particles on the den‐Ag/Ti electrode. Polyaniline (PANI) modified den‐Ag/Ti and Ag_xCo_y/Ti electrodes, PANI(n)‐den‐Ag/Ti and PANI(n)‐Ag_xCo_y/Ti, were also obtained by cyclic voltammetry at different numbers of cycles (n) in acidic and alkaline solutions containing aniline, respectively. All these electrodes exhibit high electroactivity for oxygen reduction reaction (ORR) in alkaline solution and their electroactivities follow the order: PANI(15)‐Ag₃₁Co₆₉/Ti>Ag₃₁Co₆₉/Ti>PANI(20)‐den‐Ag/Ti>den‐Ag/Ti. Among them, PANI(15)‐Ag₃₁Co₆₉/Ti displays the highest electrocatalytic activity for ORR with a much positive onset potential of 0 V (vs. Ag/AgCl) and a high ORR current density of 1.2 mA cm^?2 at ?0.12 V (vs. Ag/AgCl). The electrocatalysts are electrochemically insensitive to methanol and ethanol oxidation, and, as cathode electrocatalysts of direct alcohol fuel cells, can resist poisoning by the possible alcohol crossover from the anode.     

Synthesis,Characterization and Biological Evaluation of Two Silver(I) trans‐Cinnamate Complexes as Urease Inhibitors

Two new silver(I) trans‐cinnamates, namely [Ag(2‐cca)(H₂O)]₂ ( 1 ) and [Ag(4‐cca)]_n ( 2 ) (2‐ccaH = 2‐chlorocinnamic acid and 4‐ccaH = 4‐chlorocinnamic acid), were synthesized and structurally characterized. Single crystal X‐ray studies reveal that each silver(I) atom in 1 is two‐coordinate by a 2‐chlorocinnamate ligand and one water molecule to afford a discrete centrosymmetric dimer with the ligand‐unsupported Ag···Ag interactions (3.218(4) Å), while a pair of symmetry‐related silver(I) atoms in 2 are clamped by two μ₂‐η¹:η¹ 4‐chlorocinnamate ligands to yield a binuclear silver(I) moiety incorporating a ligand‐supported Ag···Ag interaction (2.819(5) Å). Both complexes 1 and 2 show potent urease inhibitory activities with the respective IC₅₀ values of 0.66 and 1.10 μM.     

H(C)Ag: a triple resonance NMR experiment for 109Ag detection in labile silver‐carbene complexes

In silver complexes, indirect detection of ¹⁰⁹Ag resonances via ¹H,¹⁰⁹Ag‐HMQC frequently suffers from small or absent J_HAg couplings or rapid ligand dissociation. In these cases, it would be favourable to employ H(X)Ag triple resonance spectroscopy that uses the large one‐bond J_XAg coupling (where the donor atom of the ligand X is the relay nucleus). We have applied an HMQC‐based version of the H(C)Ag experiment to a labile silver‐NHC complex (NHC = N‐heterocyclic carbene) at natural ¹³C isotopic abundance and variable temperature. In agreement with simulations, H(C)Ag detection became superior to ¹H,¹⁰⁹Ag‐HMQC detection above ?20 °C. Copyright © 2014 John Wiley & Sons, Ltd.     

Development of Polymeric Resin Ion‐exchanger Based Chloride Ion‐selective Electrode for Monitoring Chloride Ion in Environmental Water

A chloride ion‐selective electrode (ISE) membrane was developed by using a copolymeric ion‐exchanger resin (trimethyl ethenyl quaternary ammonium chloride polystyrene‐divinylbenzene copolymer resin, TMEQAC PSDVB), the ionophore ({μ‐[4,5‐Dimethyl‐3,6‐bis(dodecyloxy)‐1,2‐phenylene]}bis(mercury chloride), ETH9033), the plasticizer (bis(2‐ethylhexyl) sebacate, DOS), and the membrane substrate (polyvinylchloride, PVC). At 25 °C, the electrode exhibited an ideal Nernstian response of 59.2 mV/decade with the linear calibration concentration range from 1.0 × 10^?4‐1.0 × 10^?2 M (r² = 0.9930). The limit of detection was 2.45 ppm (6.9 × 10^?2 mM) and the measurement response time was less than 10 seconds. The working temperature range of electrode was 10‐45 °C. The working pH range for chloride ion measurement was 2.0‐11.0. Among the various anions examined in this work, only I^?, SCN^?, and MnO₄^? ions show significant interference to the electrode measurement. The chloride ISE can be used at least 72 days. The determination of chloride ion content in three kinds of environmental water sample with the electrode method was accurate (92‐95%) and precise (RSD < 4.4%) and did not show significance difference from the high‐performance liquid chromatography method.     

Anion Effects on the Formation of Silver(I) Complexes with the Flexible Ligand 4,4′‐Bis(1,2,4‐triazol‐1‐ylmethyl)biphenyl

The reaction of 4,4′‐bis(1,2,4‐triazol‐1‐ylmethyl)biphenyl (btmb) with silver(I) salts of BF₄^–, NO₃^– and N₃^– led to the formation of four new silver(I) coordination polymers {[Ag(btmb)]BF₄}_n ( 1 ), {[Ag₂(btmb)₃](NO₃)₂(H₂O)₅}_n ( 2 ), [Ag₂(btmb)(N₃)₂]_n ( 3 ), and [Ag(btmb)(N₃)]_n ( 4 ). Their coordination number varies from 2 (in 1 ) to 3 (in 2 ), 4 (in 3 ), and 5 (in 4 ). Different from the single chain structure of 1 , complex 2 displays a 1D ladder‐like double chain framework, whereas complex 3 exhibits a 2D layered architecture. Complex 4 has the same anion as complex 3 but shows a different metal‐to‐ligand ratio and a 1D double‐zigzag chain structure. Both 3 and 4 have Ag ··· Ag argentophilic interactions. The ligand btmb adopts both cis or trans configuration in the studied complexes. A trans‐ or cis‐btmb ligand link silver ions with Ag ··· Ag distances of ≈?18 and 13 Å, respectively. BF₄^– and NO₃^– are non‐coordinating anions in 1 and 2 . N₃^– is the bridging anion in 3 (1,3‐bridging fashion) and 4 (1,1‐bridging fashion). These findings suggest that the coordination numbers around the Ag^I ion correlate to the coordination abilities of anions and the btmb to silver ratio. In addition, the influence of anions on thermal stability were also investigated. This work is a good example that nicely supports the less explored field of anion‐dependent structures of complexes with non‐pyridyl ligands.     

Urchin‐like Ag Nanowires as Non‐enzymatic Hydrogen Peroxide Sensor

Urchin‐like Ag nanowires were prepared by reacting AgNO₃(aq) with Cu metal in the presence of cetyltrimethylammonium chloride and HNO₃(aq) on a screen printed carbon electrode at room temperature. The diameters of the nanowires were about 100 nm, while the lengths were up to 10 μm. Cyclic voltammetric experiments using the Ag nanowires as the working electrode showed electrocatalytic H₂O₂ reduction. The electrode exhibited a high sensitivity of 4705 μA mM^‐1 mg^‐1 cm^‐2 from 50 μM to 10.35 mM and a measurable detection limit of 10 μM in amperometric detection. This is the first report on Ag NWs for non‐enzymatic H₂O₂ sensing.     

Efficient Synthesis of a New Podand and Application as a Suitable Carrier for Silver Ion‐Selective Electrode

A new podand of 1,1′‐thia‐bis‐[1‐(chloroethan‐2‐acetamid‐α‐oxy)] naphtol was synthesized and used as a suitable carrier for Ag⁺ PVC membrane electrode. The electrode exhibited linear response with a Nernstian slope of (59.5±0.8 mV/decade) within a wide concentration range of 1.0×10^?7 to 1.5×10^?2 mol L^?1 silver ions. The electrode had a fast response time of <10 s and detection limit of 8.6×10^?8 mol L^?1 with a working pH range from 3.7 to 9.0. The electrode was highly selective for Ag(I) ions over a large number of cations such as alkali, alkaline earth, and heavy metal ions. The proposed sensor has been applied as an indicator electrode for indirect determination of vitamin B₁ in tablets by determination of Cl^? ions in this compound with a standard solution of Ag(NO₃).     

A Novel Three‐Electrode System Fabricated on Polymethyl Methacrylate for On‐Chip Electrochemical Detection

A new strategy of three‐electrode system fabrication in polymer‐based microfluidic systems is described here. Standard lithography, hot embossing and UV‐assisted thermal bonding were employed for fabrication and assembly of the microfluidic chip. For the electrode design the gold working (WE) and counter electrodes (CE) are placed inside a main channel through which the sample solution passes. A silver reference electrode (RE) is embedded in a small side channel containing KCl solution that is continuously pushed into the main channel. In the present work, the overall electrochemical set up and its microfabrication is described. Conditions including silver ion concentration, cyclic voltammetry (CV) settings, and the flow rate of KCl solution in the RE channel were optimized. The electrochemical performance of the three‐electrode system was evaluated by CV and also by amperometric oxidation of ferro hexacyanide ([Fe(CN)₆]^4?) and ruthenium bipyridyl ([Ru(bipy)₃]²⁺) at 400 mV and 1200 mV, respectively. CV analysis using ferri/ferro hexacyanide showed a stable, quasi‐reversible redox reaction at the electrodes with 96 mV peak separation and an anodic/cathodic peak ratio of 1. Amperometric analysis of the electrochemical species resulted in linear correlation between analyte concentration and current response in the range of 0.5–15 µM for [Fe(CN)₆]^4?, and 0–1000 µM for [Ru(bipy)₃]²⁺. Upon the given experimental conditions, the limit of detection was found to be 3.15 µM and 24.83 µM for [Fe(CN)₆]^4? and [Ru(bipy)₃]²⁺, respectively. As a fully integrated three‐electrode system that is fabricated on polymer substrates, it has great applications in microfluidic‐based systems requiring stable electrochemical detection.     

Development of an Amperometric Immunosensor for the Quantification of Staphylococcus aureus Using Self‐Assembled Monolayer‐Modified Electrodes as Immobilization Platforms

Amperometric immunosensors for the detection and quantification of S. aureus using MPA self‐assembled monolayer modified electrodes for the immobilization of the immunoreagents are reported. Two different immunosensor configurations were compared. A competitive mode, in which protein A‐bearing S. aureus cells and antiRbIgG labeled with horseradish peroxidase (HRP) compete for the binding sites of RbIgG immobilized onto the 3‐mercaptopropionic acid (MPA) modified electrode, was evaluated. Moreover, a sandwich configuration in which S. aureus cells were immobilized onto the MPA SAM, and RbIgG and antiRbIgG labeled with HRP were further linked to the electrode surface, was also tested. In both cases, TTF was used as the redox mediator of the HRP reaction with H₂O₂, and it was co‐immobilized onto the MPA‐modified gold electrode. After optimization of the working variables for both configurations, the analytical performance of the amperometric measurements carried out at 0.00 V (vs. Ag/AgCl) showed that the competitive immunosensor exhibited a lower limit of detection (1.6×10⁵ S. aureus cells mL^?1), as well as a better repeatability and reproducibility of the measurements.     

Characterization of a Silver Modified PVCAc Electrode and Its Application as a Ag(I)‐Selective Potentiometric Sensor

An all solid‐state Ag(I) ion‐selective electrode has been prepared by simply immersing a glassy carbon rod coated with PVCAc, which contained plasticizer and additive but no ionophore, into the AgNO₃ solution. The response of the electrode was linear with a Nernstian slope of 60.25 mV/decade within the concentration range from 1×10^?1 to 1×10^?5 M and with a detection limit of 4.25×10^?6 M. The stability as an effect of various cations was defined. The electrode is suitable for use in high acidic solutions (pH<1 to 7) and has successfully been applied for the determination of silver(I) concentrations in different samples.     

Anion‐directed Silver(I) Coordination Assemblies Based on 1‐(2‐Pyridyl)‐2‐(4‐pyridyl)‐1,2,4‐triazolewith Diverse Supramolecular Networks and Dichromate Removal Capabilities

A series of silver(I) supramolecular complexes, namely, {[Ag(L²⁴)](NO₃)}_n ( 1 ), [Ag₂(L²⁴)(NO₂)₂]_n ( 2 ), and {[Ag_1.25(L²⁴)(DMF)](PF₆)_1.25}_n ( 3 ) were prepared by the reactions of 1‐(2‐pyridyl)‐2‐(4‐pyridyl)‐1,2,4‐triazole (L²⁴) and silver(I) salts with different anions (AgNO₃, AgNO₂, AgPF₆). Single‐crystal X‐ray diffraction indicates that 1 – 3 display diverse supramolecular networks. The structure of dinuclear complex 1 is composed of a six‐membered Ag₂N₄ ring with the Ag ··· Ag distance of 4.4137(3) Å. In complex 2 , the adjacent Ag^I centers are interlinked by L²⁴ ligands into a 1D chain, the adjacent of which are further extended by the bridged nitrites to construct a 2D coordination architecture. Complex 3 shows a 3D (3,4)‐connected framework, which is generated by the linkage of L²⁴ ligands. All complexes were characterized by IR spectra, elemental analysis, and powder X‐ray diffraction. Notably, a structural comparison of the complexes demonstrates that their structures are predominated by the nature of anions. Additionally, 1 and 2 show efficient dichromate (Cr₂O₇^2–) capture in water system, which can be ascribed to the anion‐exchange.     

Electrochemical Properties of Electrode Modified with Langmuir‐Blodgett Film of p‐tert‐Butylcalix[4]arene Derivatives and Its Application in Determining of Silver

A new type of voltammetric sensor, Langmuir‐Blodgett (LB) film of 5,11,17,23‐tetra‐tert‐butyl‐25,27‐di(3‐thiadiazole‐propanoxy)‐26,28‐dihydroxycalix[4]arene modified glassy carbon electrode (LB_TZCA–GCE), was prepared. The electrochemical properties of LB_TZCA–GCE were researched in detail and its recognizing mechanism for silver ion in aqueous solution was discussed. Using this voltammetric sensor, a new stripping voltammetric method for determining of Ag⁺ was erected with good sensitivity, selectivity, reproducibility and recovery. The detection limit was 8×10^?9 M at accumulation time of 180 s. By this method, real samples (lake water, tap water and synthesis sample) were analyzed and the results obtained were well satisfactory.     

Application of Polymer‐Modified Hanging Mercury Drop Electrode in the Indirect Determination of Certain β‐Lactam Antibiotics by Differential Pulse,Ion‐Exchange Voltammetry

A selective and sensitive polymer‐modified electrode was developed for β‐lactam antibiotics (cefaclor, amoxycillin and ampicillin) present in formulated and blood plasma samples for the quantitative analysis in aqueous environment. The detection was made using an ion‐exchange voltammetric technique, in differential pulse mode, on poly(N‐chloranil N,N,N′,N′‐tetramethylethylene diammonium dichloride)‐modified hanging mercury drop electrode of a three‐electrode system (PAR Model 303A) attached with a Polarographic Analyzer/Stripping Voltammeter (PAR Model 264A). Antibiotics, which are electroinactive compounds, were essentially converted to their electroactive oxazolone analogues through acid treatment under drastic conditions (0.1 mol L^?1 HCl, ～85 °C, 2 h). These analytes in the form of their respective oxazolones were indirectly analyzed by oxazolone entrapment in the polymeric film through ion‐exchange process at modified electrode surface (accumulation potential ?0.20 V (vs. Ag/AgCl), accumulation time 120 s, pH 7.4, KH₂PO₄‐NaOH buffer (ionic strength 0.1 mol L^?1), scan rate 10 mV s^?1, pulse amplitude 25 mV). The limit of detection of cefaclor‐derived oxazolone was found to be 2.12 nmol L^?1 (0.82 ppb, S/N 3, RSD 3.21%) in terms of cefaclor (a representative β‐lactam) concentration.     

Flow Injection Analysis of Ascorbyl Glucoside in Cosmetics by a Disposable Printed‐Circuit Board Waste Modified Electrode

Ascorbyl glucoside, i.e., ascorbic acid 2‐glucoside (AA‐2G), is anew type of stable vitamin C derived compound used in many cosmetic skin‐lightening formulations, but rarely studied in the literature. In this study, a screen printed electrode modified with copper‐enriched printed circuit‐board waste (designated as Cu_PCB/SPE) was applied to study the electrochemical characteristics of AA‐2G. Cyclic voltammogram of the Cu_PCB/SPE showed an electrocatalytic oxidative feature at ?0.6 V vs. Ag/AgCl in 0.15 M NaOH solution. Flow injection analysis coupled with the Cu_PCB/SPE was further developed for sensitive AA‐2G determination. The calibration plot was linear in the window of 2.5–160 ppm with slope and regression coefficient of 0.0169 μA/ppm and 0.9971, respectively. The detection limit (S/N = 3) was 0.247 ppm. Real sample analysis was demonstrated for different skin‐lightening cosmetic products with appreciable results.     

Flüssig–Flüssig‐Extraktion von Silber(I) mit Aroylthiocarbamidsäure‐O‐estern – Einfluss von Solvens und Struktur der Extragentien

Liquid–Liquid Extraction of Silver(I) with Aroylthiocarbamic‐ O ‐esters Influence of the Solvents and of the Structure of Extractants Five bisbidentate (H₂L) and two bidentate (HL) aroylthiocarbamic‐O‐esters were synthesized and used for the liquid–liquid extraction of silver(I). A silver(I) complex was characterized in solid state. The distribution ratio D_Ag and the compositions of the extracted complexes were obtained for the silver extraction from nitric acid solutions depending on the pH value and the organic solvent. D_Ag values are decreasing in the sequence of the solvents decane, decane/toluene, toluene, chloroform. The bisbidentate extractants are more effective than the bidentate ones. Hetero atoms in the bridging molecule group of the bisbidentate compounds increase the D_Ag values. The extraction behavior is discussed with regard to the calculated protonation constants and stability constants.