ZrOCl2 · 8H2O as an Efficient Reagent for the Solvent‐Free Synthesis of 3,4‐Dihydropyrimidin‐2‐(1H)‐ones

ZrOCl₂ · 8H₂O, a commercially available reagent, can be used for the promotion of the synthesis of 3,4‐dihydropyrimidin‐2(1H)‐ones under solvent‐free reaction conditions. All reactions were performed at 90°C in good to high yields.     

Solvent‐Free One Pot Synthesis of 2‐aryl/Heteroarylbenzothiazoles Using Hypervalent Iodine (III) Reagents

In this article, an efficient, environmentally benign, one‐pot and simple synthesis of 2‐aryl/heteroarylbenzothiazoles by the reaction of 2‐aminothiophenol and aryl/heteroaryl aldehydes mediated by hypervalent iodine (III) reagents under solvent‐free condition at room temperature is demonstrated. All the reactions were carried out by grinding the reactants (2‐aminothiophenol and aryl/heteroaryl aldehydes) with hypervalent iodine (III) reagents in a mortar with pestle. Phenyliodine bistrifluoroacetate act as an efficient oxidizing reagent in comparison to iodobenzene diacetate in term of reaction time but yields are comparative. The advantages of this protocol are the one‐step procedure, mild reaction conditions, high yields of the products, and no side reactions.     

The role of neat substrates in phase-vanishing and tandem phase-vanishing reactions

Phase-vanishing reactions are triphasic reactions, which involve a reagent, a liquid perfluoroalkane as a phase screen and a substrate. Aromatization, isomerization and halogenation of neat substrates under phase-vanishing conditions gave the expected products in good to excellent yields. In tandem single-phase-phase-vanishing reaction, two reactants, placed in the top phase, afforded the intermediate, which in a subsequent phase-vanishing reaction reacted with the reagent from the bottom phase to give the final product. The reaction worked well under solvent-free conditions on liquid substrates and intermediates. With solids, results were better if an additional solvent was employed.     

2,6‐Dicarboxypyridinium Fluorochromate: A Mild and Efficient Reagent for Oxidative Deprotection of Oximes,Phenylhydrazones, and Semicarbazones to Their Corresponding Carbonyl Compounds under Solvent‐Free Conditions

2,6‐Dicarboxypyridinium fluorochromate as a new, rapid, and efficient reagent was prepared and used for the oxidative deprotection of oximes, phenylhydrazones, and semicarbazones to their carbonyl analogues under solvent‐free conditions at room temperature.     

Photoinduced Proton‐Transfer Reactions for Mild O‐H Functionalization of Unreactive Alcohols

Hexafluoroisopropanol is typically considered as an unreactive solvent and not as a reagent in organic synthesis. Herein, we report on a mild and efficient photochemical reaction of aryl diazoacetates with hexafluoroisopropanol that enables, under stoichiometric reaction conditions, the synthesis of fluorinated ethers in excellent yield. Mechanistic studies indicate there is a preorganization of hexafluoroisopropanol and the diazoalkane acts as an unreactive hydrogen‐bonding complex. Only after photoexcitation does this complex undergo a protonation‐substitution reaction to the reaction product. Investigations on the applicability of this photochemical transformation show that a broad variety of acidic alcohols can be subjected to this transformation and thus demonstrate the feasibility of this concept for O‐H functionalization reactions (54 examples, up to 98 % yield).     

N‐Methylation of Nitrogen‐Containing Heterocycles with Dimethyl Carbonate

Reactivity of dimethyl carbonate, the environmentally friendly reagent, as methylating agent for nitrogen‐containing heterocyclic compounds has been studied. Reactions of imidazole, pyrazole, pyrrole, morpholine, and piperazine with dimethyl carbonate to afford N‐methylated products were reported. The reactions were carried out with neither catalyst nor solvent at a temperature range of 110–170°C under atmospheric pressure.     

Mechanochemical synthesis and cycloaddition reactions of fluoro nitrone under solvent‐free conditions and potential antimicrobial activities of the cycloadducts

Synthesis and cycloaddition reactions of fluoro nitrone under solvent‐free conditions using ball‐milling technique have been reported. Significant change in rate and yields of the cycloadducts have been noticed compared with solvent‐free microwave‐induced reactions of fluoro nitrones. The present study reports synthesis of N‐benzyl fluoro nitrone and its cycloaddition reactions with maleimides and few electron deficient alkynes under solvent‐free conditions. The synthesized fluoro cycloadducts were found to exhibit potential antimicrobial activities.     

(NO3)3CeBrO3: Solvent‐Free Oxidation of Alcohols and Deprotection and Oxidative Deprotection of Trimethylsilyl Ethers

Trinitratocerium(IV) bromate (TNCB) can be used as an efficient reagent for oxidation of alcohols and deprotection and oxidative deprotection of trimethylsilyl ethers under solvent‐free conditions.     

Supported Tetramethylamonium Nitrate/Silicasulfuric Acid as a Useful Reagent for Nitration Aromatic Compounds Under Solvent‐Free Conditions

A variety of aromatic compounds are nitrated to the parent nitro aromatic compounds under solvent‐free conditions using supported tetramethylammonium nitrate/silicasulfuric acid as a useful reagent. This methodology is useful for nitration of activated and deactivated aromatic rings.     

The Utilization of Solid State Chemistry Reaction Routes as New Syntheses Strategies for the Coordination Chemistry of Rare Earth Amides

Solvent free high‐temperature reactions in melts are well known procedures in Solid‐State Chemistry. Although the reaction conditions are extreme considering the properties of organic ligands they can also be utilized for Coordination Chemistry and offer a fruitful alternative to usual solvent treatments. This includes the chemistry of organic amides of the rare earth elements. The avoidance of any solvent renders novel homoleptic complexes accessible but also implies difficulties bound to the solid state of the reaction mixtures. The high chemical affinity of the rare earth elements towards halides and especially oxygen limits known homoleptic amides obtained via solvent treatments mostly to multi‐chelating ligands like porphyrines, calix‐pyrroles etc. With no special conditions met like a high steric demand, solvent molecules as co‐coordinating partners enforce the formation of heteroleptic species. This influence can be avoided by the use of completely solvent free reactions, such as melt reactions in which a solid is reacted directly with a melt or with a substance under solvothermal conditions. The high reactivity of the rare earth metals allows the direct oxidation with amines and thus to use high‐temperature reactions for the formation of rare earth amides. This includes homoleptic compounds from simple ligands. Crystallization under reaction conditions is possible; no re‐crystallization step is necessary preventing the risk of a change of the chemical character of the products. Additionally, the solubility of rare earth elements in liquid ammonia under formation of an electride solution enlarges the temperature range of these oxidation reactions down to the melting point of ammonia. It further enhances the reactivity of the metals and less N‐H acidic and thermally less stable amines can be introduced into these syntheses enabling the formation of meta stable products. The crystal structures and hence the properties of the products of both high‐ and low‐temperature oxidation of rare earth metals with amines strongly differ from reactions carried out in classic solvents. Thus reaction routes frequently used in Solid State Chemistry can well be utilized for Coordination Chemistry and offer alternatives to classic solvent based synthesis, particularly if certain properties like homoleptic character or the coordination of elements with a low chemical affinity are aimed for.     

Rapid Vortex Fluidics: Continuous Flow Synthesis of Amides and Local Anesthetic Lidocaine

Thin film flow chemistry using a vortex fluidic device (VFD) is effective in the scalable acylation of amines under shear, with the yields of the amides dramatically enhanced relative to traditional batch techniques. The optimized monophasic flow conditions are effective in ≤80 seconds at room temperature, enabling access to structurally diverse amides, functionalized amino acids and substituted ureas on multigram scales. Amide synthesis under flow was also extended to a total synthesis of local anesthetic lidocaine, with sequential reactions carried out in two serially linked VFD units. The synthesis could also be executed in a single VFD, in which the tandem reactions involve reagent delivery at different positions along the rapidly rotating tube with in situ solvent replacement, as a molecular assembly line process. This further highlights the versatility of the VFD in organic synthesis, as does the finding of a remarkably efficient debenzylation of p‐methoxybenzyl amines.     

An efficient synthesis of 1‐H‐pyrazole‐4‐carboxylic acid esters with vilsmeier reagent under neat conditions

A convenient, solvent‐free Vilsmeier reagent is experimented under neat condition (both thermal and microwave conditions). An efficient method for the synthesis of various substituted 1H‐pyrazole‐4‐carboxylic acid esters is reported.     

Esterification of Carboxylic Acids and Diacids by Trialkyl Borate under Solvent- and Catalyst-Free Conditions

Esterification or transesterification reactions are usually carried out in the presence of homogeneous or heterogeneous catalysts. However, recently a new method was reported for the esterification of carboxylic acids by tributyl borate under solvent- and catalyst-free conditions. In order to show the synthetic ability of trialkyl borate esters in the esterification reactions, here, the esterification of other carboxylic acids and diacids by tributyl-, triisoamyl-, and tribenzyl borate under the same conditions were reported. Some of the prepared ester and diester products have found wide applications as plasticizers and synthetic ester base lubricants. The esterification reactions have been cleanly carried out in the absence of any solvent under catalyst-free conditions. The maximum rate belongs to isoamyl trichloroacetate （VIb） which reached about 76% within about 6.5 h. On the basis of obtained findings, it seems that electron withdrawing groups on carboxylic acid facilitate the esterification reaction.     

Using soluble polymers in latent biphasic systems

A new strategy for carrying out reactions with a soluble polymer-bound reagent or catalyst is described. In this latent biphasic process, a solvent mixture at the cusp of immiscibility is prepared and used to carry out a reaction under homogeneous conditions. Then, after the reaction is complete, this mixture is perturbed by the addition of solvent or some other perturbing agent to produce a biphasic mixture. The product-containing phase is then separated under liquid/liquid conditions from the polymer-containing phase. The generality of this process is demonstrated using both dye-labeled polymers as surrogates for polymer-bound catalysts and with various polymer-bound organic and transition metal catalysts or reagents. In cases where a polymeric catalyst is used, the addition of fresh solvent and substrate reforms the original mixture allowing facile reuse of the catalyst.     

Azidopropylvinylsulfonamide as a New Bifunctional Click Reagent for Bioorthogonal Conjugations: Application for DNA–Protein Cross‐Linking

N‐(3‐Azidopropyl)vinylsulfonamide was developed as a new bifunctional bioconjugation reagent suitable for the cross‐linking of biomolecules through copper(I)‐catalyzed azide–alkyne cycloaddition and thiol Michael addition reactions under biorthogonal conditions. The reagent is easily clicked to an acetylene‐containing DNA or protein and then reacts with cysteine‐containing peptides or proteins to form covalent cross‐links. Several examples of bioconjugations of ethynyl‐ or octadiynyl‐modified DNA with peptides, p53 protein, or alkyne‐modified human carbonic anhydrase with peptides are given.     

Novel method for the synthesis of 1,2,4‐oxadiazoles using alumina supported ammonium fluoride under solvent‐free condition

Alumina supported ammonium fluoride was found as an efficient reagent for the synthesis of 1,2,4‐oxadi‐azoles of amidoximes under solvent free conditions using microwave irradiation. This method is a one‐pot, easy, rapid, and high‐yielding reaction for the synthesis of 1,2,4‐oxadiazole derivatives from amidoximes and acyl chlorides. Reaction of amidoximes with acylchlorides in the presence of alumina without ammonium fluoride gave only the corresponding O‐acylamidoximes as major product.     

A novel use of the recyclable polymer-supported IBX: an efficient chemoselective and regioselective oxidation of phenolic compounds. The case of hydroxytyrosol derivatives.

A useful and novel application of polymer-supported IBX for the chemoselective and regioselective oxidation of phenolic compounds has been described. Hydroxytyrosol and carboxymethylated hydroxytyrosol have been prepared in good conversions and yields under green chemistry conditions in the presence of dimethyl carbonate as the solvent. Polymer-supported reagent has been recovered by simple filtration, regenerated and reused for more cycles of oxidation reactions without loss of efficiency.     

Palladium‐catalysed cyclocarbonylation reactions in dimethyl carbonate,an eco‐friendly solvent and ring‐opening reagent

Dimethyl carbonate (DMC) is used as an alternative and eco‐friendly solvent for selective cyclocarbonylation reactions of allyl phenol derivatives for the synthesis of lactones; in some cases, depending on the reaction condition, DMC behaves as a ring‐opening reagent producing methoxycarbonyl compounds. Copyright © 2003 John Wiley & Sons, Ltd.     

Can be Azo Dyes Obtained by Grinding under Solvent‐Free Conditions?

The solid‐solid reactions of some electron‐donors with sulfanilic acid in the presence of solid sodium nitrite afford azo dyes by self‐catalyzed diazotization of sulfanilic acid (2) under solvent‐free conditions with moderate yields. Also the reactions of some electron‐donors with diazotization of o‐nitroaniline (5), m‐nitroaniline (6) and p‐nitroaniline (7) in the presence of solid sodium nitrite catalyzed by p‐toluenesulfonic acid (PTSA) afford azo dyes under solvent‐free conditions in good yields. This new method totally avoids the use of acids, alkalies, and toxic and/or expensive solvents in diazotization and diazo coupling reactions.     

P2O5/SiO2 as an Efficient Reagent for Selective Deprotection of 1,1‐Diacetates under Solvent‐Free Conditions

A mild and efficient method has been developed for the selective deprotection of 1,1‐diacetates of aldehydes in excellent yields by means of the P₂O₅/SiO₂ reagent. Advantages of this method are the use of inexpensive and selective reagent, with high yields in simple operation, and short reaction time under solvent‐free conditions.