Selective Chemosensor of Fe3+ Based on Fluorescence Quenching by 2,2′‐Bisbenzimidazole Derivative in Aqueous Media

2,2′‐Bisbenzimidazole derivative ( L ) was designed as a fluorescent chemosensor for Fe³⁺. This structurally simple chemosensor displays significant fluorescence quenching with increasing concentrations of Fe³⁺. L exhibited high selectivity and antidisturbance for Fe³⁺ among environmentally relevant metal ions in aqueous media. The method of Job's plot indicated the formation of 1:2 complex between L and Fe³⁺, and the possible binding mode of the system was also proposed. In addition, further study demonstrates the detection limit on fluorescence response of the sensor to Fe³⁺ is down to 10^?7 mol·L^?1 range. The binding mode was investigated by fluorescence spectra, ESI‐MS, IR data, ¹H NMR, ¹³C NMR and crystal data.     

Determination of Hg on poly(vinylferrocenium) (PVF)-modified platinum electrode

A new surface based on poly(vinylferrocenium) (PVF⁺)-modified platinum electrode was developed for determination of Hg²⁺ ions in aqueous solutions. The polymer was electrodeposited on platinum electrode by constant potential electrolysis as PVF⁺ClO₄⁻. Cl⁻ ions were then attached to the polymer matrix by anion exchange and the modified electrode was dipped into Hg²⁺ solution. Hg²⁺ was preconcentrated at the polymer matrix by adsorption and also complexation reaction with Cl⁻. Detection of Hg²⁺ was carried out by differential pulse anodic stripping voltammetry (DPASV) after reduction of Hg²⁺. Mercury ions as low as 5 × 10⁻¹⁰ M could be detected with the prepared electrode and the relative standard deviation was calculated as 6.35% at 1 × 10⁻⁶ M concentration (n = 6). Interferences of Ag⁺, Pb²⁺ and Fe³⁺ ions were also studied at two different concentration ratios with respect to Hg²⁺. The developed electrode was applied to the determination of Hg²⁺ in water samples.     

A Highly Selective and Turn‐on Fluorescent Probe for Fe3+ Ion Based on Perylene Tetracarboxylic Diimide

We have demonstrated a turn‐on fluorescent sensor 6 for detection of Fe³⁺ based on photo‐induced electron transfer (PET) mechanism. The probe comprises a perylene tetracarboxylic diimide (PDI) fluorophore and two bis((1,2,3‐triazol‐4‐yl)methyl)amine (DTA) moieties as the metal ion receptors. It exhibits high selectivity toward Fe³⁺ over various other metal ions in CH₃CN/H₂O (1:1, V/V). The binding stoichiometry for 6 ‐Fe³⁺ complexes has been determined to be 1:2 by a Job plot of fluorescence. The association constant between 6 and Fe³⁺ was estimated to be 1.04×10¹⁰ (mol/L)^?2 by Benesi‐Hildebrand equation.     

Fe(phen)32+‐Modified Zeolite Particles and Their Energetic Studies

Chemically modified zeolite Y (NaY) particles and their resulting modified electrodes were prepared with acridinium (AcH+), iron(II) and 1,10‐phenanthroline (phen) for energetic studies. According to diffuse reflectance absorption spectroscopy and cyclic voltammetry, AcH⁺ and Fe(phen)₃²⁺ were successfully entrapped in the zeolite particles. Transient emission spectra measurements showed that the life time of AcH+* in the zeolite particles (to 35 ns; λ_ex 365 nm; λ_em 500 nm) was greatly reduced upon incorporating Fe(phen)₃²⁺ and Fe²⁺. The fast de cay of AcH+*(NaY) suggested that a reductive quench was likely to take place in the zeolite particle. Probably due to a size‐exclusion effect, the bulky electron donor, N, N‐diethyl‐2‐methyl‐1,4‐phenylenediamine (DEPD), revealed a difficulty in reaching the photosensitizer, AcH⁺, in side the zeolite particle. As a consequence, the in significant photocurrent for the oxidation of DEPD was from the NaY|AcH⁺ electrode. However, if Fe²⁺ and Fe(phen)₃²⁺ were incorporated, the photocurrent would become more significant. Closer examinations, in addition, showed that the photooxidaton of DEPD occurred more rapidly on the NaY|AcH⁺|Fe(phen)₃²⁺ electrode, compared to the NaY|AcH⁺|Fe²⁺ electrode. This difference apparently results from a greater gap in energetics between DEPD and Fe(phen)₃³⁺_(NaY) than that between DEPD and Fe³⁺_(NaY). Due to this effect, a greater amount of indophenol blue, derived from the coupling reaction of the oxidized DEPD with 1‐naphthol, was formed and de posited on the NaY|AcH⁺|Fe(phen)₃²⁺modified electrode. Thanks to this photo‐induced charge‐transfer reaction, the NaY|AcH⁺|Fe(phen)₃²⁺ particle showed an application potential in image recording.     

Investigation of structure of Fe3+ magnetic center in polyparaphenylene

In the temperature range between 4.2 and 300 K, the EPR spectrum of the impurity Fe³⁺ ion in the organic polyparaphenylene has been investigated. An effect developed as an unusual temperature change of Fe³⁺ EPR spectrum has been revealed. The EPR spectrum of powder sample consists of two resonance lines. Line 1 with the effective g‐value equal to g₁ = 4.21 ± 0.05 is of the maximum intensity at T = 4.2 K. With temperature increase, the intensity of line 1 decreases until vanishing. Line 2 is observed over the whole temperature range. For T = 300 K, the g‐value of line 2 is g₂ = 2.00 ± 0.09. To study the structure of magnetic ion molecular environment and define nonequivalent positions of the magnetic ion in polyparaphenylene, a calculation was done of the energy of Fe³⁺ magnetic ion for various possible molecular environments. It is shown that in polyparaphenylene for the Fe³⁺ magnetic ion there are two different stationary molecular environments. The obtained model of magnetic ion molecular environment was used to explain the temperature dependence of the EPR spectrum. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem, 2002     

Enhanced Performance of CNT‐doped Imine Based Receptors as Fe(III) Sensor Using Potentiometry and Voltammetry

A highly sensitive and selective potentiometric and voltammteric assay for the detection of Fe³⁺ using (E)‐3‐((2‐(2‐(2‐aminoethylamino) ethylamino) ethylimino)methyl)‐4H‐chromen‐4‐one (IFE(III)) ionophore was developed. To demonstrate the ion‐to‐electron transfer ability of MWCNT, these were incorporated in the ion‐selective membrane and response characteristics of Fe³⁺ electrode was compared with those of the traditional ion selective electrode. The electrode showed an improved Nernstian slope, lower detection limit, response time of less than 5 s and working in a pH range of 3.0 to 8.0. Differential pulse voltammetric studies were performed for IFE(III)‐Fe³⁺ complex in DMSO solvent medium at glassy carbon (GC) electrode. A linear relationship between the cathodic peak current and concentration of Fe³⁺ was observed in the range of 1.6×10^?5 to 4.4×10^?5 mol/L with a detection limit of 5.2×10^?8 mol/L. The electrode shows remarkable selectivity for Fe³⁺ ions over alkali, alkaline earth, transition and heavy metal ions. The optimized electrode was successfully applied for the determination of Fe³⁺ ion in different real‐life samples using potentiometric technique. Theoretical calculations were used to support the complexation behavior of Fe³⁺ with IFE(III).     

A dual functional 1D Cd-based coordination polymer for the highly luminescent sensitive detection of Fe3+ and picric acid

Fluorescent coordination polymers have drawn extensive attention in sensing applications. Herein, we report a carbazole-based one-dimensional coordination polymer [CdL(H₂O)(DMF)₂]·DMF ( CdL , H₂L = 9H-carbazole-2,7-dicarboxylic acid, DMF = N,N-dimethylformamide). In CdL , each Cd²⁺ ion is four-bridged by carboxylates, which is further linked by the carbazole units to form a one-dimensional Cd–O–C chains along the c-axis. CdL displays high water stability in the pH range of 3–10. Luminescence experiments indicate that CdL could selectively detect Fe³⁺ during the concentration range of 0–0.1 mm in water with a K_sv of 8022 m ⁻¹ and picric acid (PA) within the concentration range of 0–0.05 mm in methanol solution with a K_sv of 17948 m ⁻¹ respectively. The above results reveal that CdL can be applied as a multiresponse luminescence sensor for selectively sensing for Fe³⁺ in water and PA in methanol solution.     

A novel ion selective membrane potentiometric sensor for direct determination of Fe(III) in the presence of Fe(II)

A new PVC membrane potentiometric sensor that is highly selective to Fe(III) ions was prepared by using 2-[(2-hydroxy-1-propenyl-buta-1,3-dienylimino)-methyl]-4-p-tolylazo-phenol [HPDTP] as a suitable carrier. The electrode exhibits a linear response for iron(III) ions over a wide concentration range (3.5 × 10⁻⁶ to 4.0 × 10⁻²) with a super Nernstian slope of 28.5 (±0.5) per decade. The electrode can be used in the pH range from 4.5 to 6.5. The proposed sensor shows fairly a good discriminating ability towards Fe³⁺ ion in comparison to some hard and soft metals such as Fe²⁺, Cd²⁺, Cu²⁺, Al³⁺ and Ca²⁺. It has a response time of <15 s and can be used for at least 2 months without any measurable divergence in response characteristics. The electrode was used in the direct determination of Fe³⁺ in aqueous samples and as an indicator electrode in potentiometric titration of Fe(III) ions.     

Comparison of Cadmium Cd2+ and Lead Pb2+ Binding by Fe2O3@SiO2‐EDTA Nanoparticles – Binding Stability and Kinetic Studies

This study describes the synthesis and characterization of ethylenediaminetetraacetic acid (EDTA) functionalized magnetic nanoparticles of 20 nm in size – Fe₃O₄@SiO₂‐EDTA – which were used as a novel magnetic adsorbent for Cd(II) and Pb(II) binding in aqueous medium. These nanoparticles were obtained in two‐stage synthesis: covering by tetraethyl orthosilicate and functionalization with EDTA derivatives. Nanoparticles were characterized using TEM, FT‐IR, and XPS methods. Metal ions were detected under optimized experimental conditions using Differential Pulse Anodic Stripping Voltammetry (DPASV) and Hanging Mercury Drop Electrode (HDME) techniques. We compared the ability of Fe₃O₄@SiO₂‐EDTA to bind cadmium and lead in concentration of 553.9 μg L^?1 and 647.5 μg L^?1, respectively. Obtained results show that the adsorption rate of cadmium binding was very high. The equilibrium for Fe₃O₄@SiO₂‐EDTA‐Cd(II) was reached within 19 min while for the Fe₃O₄@SiO₂‐EDTA‐Pb(II) was reached within 25 minutes. About 2 mg of nanoparticles was enough to bind 87.5 % Cd(II) and 54.1 % Pb(II) content. In the next step the binding capacity of Fe₃O₄@SiO₂‐EDTA nanoparticles was determined. Only 1.265 mg of Fe₃O₄@SiO₂‐EDTA was enough to bind 96.14 % cadmium ions while 5.080 mg of nanoparticles bound 40.83 % lead ions. This phenomenon proves that the studied nanoparticles bind Cd(II) much better than Pb(II). The cadmium ions binding capacity of Fe₃O₄@SiO₂‐EDTA nanoparticles decreased during storage in 0.5 M KCl solution. Two days of Fe₃O₄@SiO₂‐EDTA storage in KCl solution caused the 32 % increase in the amount of nanoparticles required to bind 60 % of cadmium while eight‐days storage caused further increase to 328 %. The performed experiment confirmed that the storage of nanoparticles in solution without any surfactants reduced their binding capacity. The best binding capacity was observed for the nanoparticles prepared directly before the electrochemical measurements.     

Coordinatively Unsaturated Fe3+ Based Activatable Probes for Enhanced MRI and Therapy of Tumors

Exogenous Fe^III can be used for cancer magnetic resonance (MR) imaging and potentially for cancer treatment by a ferroptosis pathway or photothermal ablation. To achieve this, effective and accurate delivery of Fe^III to cancerous sites is critical, requiring a balance of release kinetics of Fe³⁺ in tumorous and normal tissues. A nanoprobe is described consisting of upconversion luminescence (UCL) nanoparticles as a core and a coordinatively unsaturated Fe^III‐containing Fe³⁺/gallic acid complex as a shell. Owing to the introduction of an unsaturated coordination structure, Fe^III in the nanoprobe can be released only in the tumor microenvironment in response to the lightly acidic pH. The multiple UCLs are used for quantitatively visualizing the release of Fe³⁺ in vivo, whilst the release resultant serves as a photothermal agent. This nanoprobe exhibited ligand‐free tumor targeting ability, activatable MR imaging performance, and efficacious therapeutic effects against tumors in vivo.     

Anion influence on the hydrated oxides formed by Fe3+ and Fe2+ precipitation

The anion influence on the hydrated oxides formed by Fe³⁺ and Fe²⁺ precipitation simulating the aqueous radioactive waste treatment has been investigated by Mössbauer spectroscopy. Fe₃(SO₄)₂, Fe(NO₃)₃, FeCl₃, FeSO₄ and FeCl₂ were used as iron sources and neutralized by NaOH. The obtained products contain several kinds of amorphous and/or poorly crystallized hydrated oxides, depending on the anion type which exists in solution and on the initial iron valence. The pH influence on the final precipitate is taken into account.     

Anthrone-spirolactam and quinoline hybrid based sensor for selective fluorescent detection of Fe3+ ions

The synthesis of a novel, and highly selective Fe³⁺ ion sensor based on anthrone-spirolactam and its quinoline hybrid ligand is reported. The designed ligand displayed selective detection of Fe³⁺ ions with enhanced fluorescence emission. The complexation of Fe³⁺ ion led to a red shift of 32 nm from 420 nm to 452 nm, and a several fold increase in intensity with fluorescent green emission. The complexation (detection) of Fe³⁺ ions with ligand resulted in chelation enhanced fluorescence and intramolecular charge transfer through the inhibition of C=N isomerization. This hybrid sensor shows high sensitivity and selectivity, spontaneous response, and works on a wide pH range a minimum detection limit of 6.83 × 10⁻⁸ M. Importantly, the sensor works through the fluorescence turn-on mechanism that overcomes the paramagnetic effect of Fe³⁺ ions. The binding mechanism between the ligand and the Fe³⁺ ions was established from the Job's plot method, optical studies, Fourier transfor infrared spectroscopy, NMR titration, fluorescence life-time studies, and density functional theory optimization. The sensor displayed excellent results in the quantification of Fe³⁺ ions from real water samples. Furthermore, due to its biocompatibility nature, fluorescent spotting of Fe³⁺ ions in live cells revealed its bioimaging applications.     

Investigating the oxidation state of Fe from LiFePO4-based lithium ion battery cathodes via capillary electrophoresis

A capillary electrophoresis (CE) method with ultraviolet/visible (UV–Vis) spectroscopy for iron speciation in lithium ion battery (LIB) electrolytes was developed. The complexation of Fe²⁺ with 1,10-phenantroline (o-phen) and of Fe³⁺ with ethylenediamine tetraacetic acid (EDTA) revealed effective stabilization of both iron species during sample preparation and CE measurements. For the investigation of small electrolyte volumes from LIB cells, a sample buffer with optimal sample pH was developed to inhibit precipitation of Fe³⁺ during complexation of Fe²⁺ with o-phen. However, the presence of the conducting salt lithium hexafluorophosphate (LiPF₆) in the electrolyte led to the precipitation of the complex [Fe(o-phen)₃](PF₆)₂. Addition of acetonitrile (ACN) to the sample successfully re-dissolved this Fe²⁺-complex to retain the quantification of both species. Further optimization of the method successfully prevented the oxidation of dissolved Fe²⁺ with ambient oxygen during sample preparation, by previously stabilizing the sample with HCl or by working under counterflow of argon. Following dissolution experiments with the positive electrode material LiFePO₄ (LFP) in LIB electrolytes under dry room conditions at 20°C and 60°C mainly revealed iron dissolution at elevated temperatures due to the formation of acidic electrolyte decomposition products. Despite the primary oxidation state of iron in LFP of +2, both iron species were detected in the electrolytes that derive from oxidation of dissolved Fe²⁺ by remaining molecular oxygen in the sample vials during the dissolution experiments.     

Separation of europium from aqueous solutions using Al3+- and Fe3+-doped zirconium and titanium phosphates

Summary The sorption of europium from aqueous solutions (Eu-concentration: 10 to 250 mg/l) by Fe³⁺- and Al³⁺-doped zirconium- and titanium-phosphates was investigated using a batch technique and ¹⁵²Eu tracer. The initial pH of the solutions was adjusted to 3, 4, 5 and 6. All investigations were performed under constant ionic strength, I=0.15 established by NaCl.<span lang=EN-GB style='font-size:12.0pt;mso-ansi-language:EN-GB'>Although zirconium phosphates generally showed a higher Eu-uptake capacity than the titanium ones, all investigated materials possessed the ability to remove considerable amounts of europium from aqueous solutions. The Eu-sorption properties of the studied phosphate materials<span style='font-size:12.0pt'>seem to be not especially affected by the type of trivalent cations used for the doping (i.e., Al³⁺or Fe³⁺).     

ABSORPTIVE IONOPHORES FOR Fe3+ CATION BY PARENT CALIX[n]ARENES

The absorption of Fe³⁺ ion from the aqueous phase to the solid phase was carried out by using p-tert-butyl calix[6]arene (L₁), calix[6]arene (L₂), p-tert-butyl calix[8]arene (L₃), and calix[8]arene (L₄). The effect of varying pH upon the absorption capability of parent calixarenes was examined. It was found that the compounds (L₁, L₂, L₃, and L₄) showed the highest extractability toward Fe³⁺ ion at 4.5–5.4. The calixarene L₂ shows a strong binding ability to Fe³⁺ ion. Based on the continuous variation method, calixarene L₂ formed 1:1 complex with Fe³⁺ ion.     

A Selective Colorimetric and Fluorescent Chemodosimeter for Fe(III) Ion Based on Hydrolysis of Schiff Base

An efficient colorimetric and fluorescent chemodosimeter for Fe³⁺ ions has been developed. The visual and fluorescent behaviors of the receptor toward various metal ions were investigated. The receptor shows exclusive response toward Fe³⁺ ions and also distinguishes Fe³⁺ from other cations by color change and unusual fluorescence enhancement in aqueous solution (DMSO/H₂O = 4/1, v/v). Thus, the receptor can be used as a colorimetric and fluorescent sensor for the determination of Fe³⁺ ion. The visual color detection limit and the fluorescence detection limit of the receptor towards Fe³⁺ are (1.42 ± 0.01) × 10^‐6 M and (7.57 ± 0.04) × 10^‐8 M, respectively. The fluorescence microscopy experiments showed that the receptor is efficient for detection of Fe³⁺ in vitro, developing a good image of the biological organelles. The sensing mechanism is proven to be a hydrolysis process     

Fe3+掺杂TiO2/凹凸棒复合光催化剂的制备和光催化活性

用酸催化溶胶-凝胶法制备了Fe³⁺掺杂TiO₂/凹凸棒（Fe³⁺-TiO₂/ATP）复合光催化剂,对其结构、微观形貌、光吸收性能和可见光下的光催化性能进行了表征。XRD和TEM测试结果表明,Fe³⁺-TiO₂/ATP具有较好的热稳定性,经450 ℃热处理后的ATP晶体结构基本保持不变,锐钛矿TiO2均匀的分布在ATP表面,TiO2颗粒之间无团聚,且平均粒径小于纯TiO₂。UV-Vis-DRS测试结果表明,Fe³⁺的掺杂可明显增强复合光催化剂对可见光的吸收,光响应范围拓展到了整个紫外-可见光区。在可见光下,Fe³⁺-TiO₂/ATP复合光催化剂对亚甲基蓝具有很好的催化降解活性。Fe³⁺-TiO₂/ATP的反应速率常数分别为TiO₂/ATP、P25和纯TiO2的1.37、4.83和6.51倍。复合光催化剂的沉降性能优于纯TiO2和P25,易于分离。     

The self-assembly, characterization and application of hemoglobin immobilized on Fe3O4@Pt core-shell nanoparticles

Direct electron transfer is demonstrated to occur between an electrode and hemoglobin that was immobilized on a film of Fe₃O₄@Pt-chitosan (Fe₃O₄@Pt-CS). Magnetic nanoparticles composed of Fe₃O₄ were prepared by a chemical coprecipitation method, and platinum nanoparticles were deposited on the Fe₃O₄ surface to form novel core-shell nanocomposites. In phosphate buffer solution of pH 7.0, the hemoglobin-Fe₃O₄@Pt-CS assembly on a modified glassy carbon electrode exhibited a couple of well-defined and quasi-reversible redox peaks. The formal potential E^0′ was about ?0.35 V. The electrode displayed excellent electrocatalytic activity towards oxygen and hydrogen peroxide reduction without the need for an electron mediator.     

Platinum-Iron(II) Oxide Sites Directly Responsible for Preferential Carbon Monoxide Oxidation at Ambient Temperature: An Operando X-ray Absorption Spectroscopy Study**

Operando X-ray absorption spectroscopy identified that the concentration of Fe²⁺ species in the working state-of-the-art Pt−FeO_x catalysts quantitatively correlates to their preferential carbon monoxide oxidation steady-state reaction rate at ambient temperature. Deactivation of such catalysts with time on stream originates from irreversible oxidation of active Fe²⁺ sites. The active Fe²⁺ species are presumably Fe⁺²O⁻² clusters in contact with platinum nanoparticles; they coexist with spectator trivalent oxidic iron (Fe³⁺) and metallic iron (Fe⁰) partially alloyed with platinum. The concentration of active sites and, therefore, the catalyst activity strongly depends on the pretreatment conditions. Fe²⁺ is the resting state of the active sites in the preferential carbon monoxide oxidation cycle.     

A highly sensitive and selective fluorescent probe for Fe3+ containing two rhodamine B and thiocarbonyl moieties and its application to live cell imaging

A novel turn-on rhodamine B-based fluorescent chemosensor (RBCS) was designed and synthesized by reacting N-(rhodamine B)lactam-1,2-ethylenediamine and carbon disulfide. Upon addition of Fe³⁺ in EtOH/H₂O solution (2:1, v/v, HEPES buffer, 0.6?mM, pH 7.20), the RBCS displayed a significant fluorescence enhancement at 582?nm and a dramatic color change from colorless to pink, which can be detected by the naked eye. Significantly, the RBCS exhibited a highly selective and sensitive ability toward Fe³⁺. The detection limit of the probe was 2.05?×?10^?7?M. Job's plot indicated the formation of 1:1 complex between the RBCS and Fe³⁺. Moreover, the practical use of the RBCS is demonstrated by its application in the detection of Fe³⁺ in HeLa cells.