Uniform arrays of gold nanoparticles with different surface roughness for surface enhanced Raman scattering

Uniform arrays of coarse and smooth gold nanoparticles with diameter about 130 nm were successfully synthesized through seed-mediated growth method, separately. Scanning and transmission electron microscopy (SEM and TEM) and X-ray diffraction (XRD) have been used to study the formation and structure of the nanocomposites. The high enhancement factor for surface-enhanced Raman scattering of coarse and smooth gold nanoparticles were estimated to be about 3.1 × 10⁶ and 2.0 × 10⁶, respectively. It is evident that the coarse gold nanostructures has higher influence factor than the smooth gold nanostructures. Therefore, these unique properties of the coarse Au nanoparticles appear to be very promising for applications as high-performance SERS substrates.     

Surface-enhanced Raman scattering for perchlorate detection using cystamine-modified gold nanoparticles

Perchlorate (ClO₄⁻) has recently emerged as a widespread environmental contaminant found in groundwater and surface water, and there is a great need for rapid detection and monitoring of this contaminant. This study presents a new technique using cystamine-modified gold nanoparticles as a substrate for surface-enhanced Raman scattering (SERS) detection of perchlorate at low concentrations. A detection limit of 5 × 10⁻⁶ M (0.5 mg/L) has been achieved using this method without sample preconcentration. This result was attributed to a strong plasmon enhancement by gold metal surfaces and the electrostatic attraction of ClO₄⁻ onto positively charged, cystamine-modified gold nanoparticles at a low pH. The methodology also was found to be reproducible, quantitative, and not susceptible to significant interference from the presence of anions such as sulfate, phosphate, nitrate and chloride at concentrations <1 mM, making it potentially suitable for rapid screening and routine analysis of perchlorate in environmental samples.     

Surface-enhanced Raman scattering of 4-aminobenzenethiol on silver nanoparticles substrate

Active surface-enhanced Raman scattering (SERS) silver nanoparticles substrate was prepared by multiple depositions of Ag nanoparticles on glass slides. The substrate is based on five depositions of Ag nanoparticles on 3-aminopropyl-trimetoxisilane (APTMS) modified glass slides, using APTMS sol–gel as linker molecules between silver layers. The SERS performance of the substrate was investigated using 4-aminobenzenethiol (4-ABT) as Raman probe molecule. The spectral analyses reveal a 4-ABT Raman signal enhancement of band intensities, which allow the detection of this compound in different solutions. The average SERS intensity decreases significantly in 4-ABT diluted solutions (from 10⁻⁴ to 10⁻⁶ mol L⁻¹), but the compound may still be detected with high signal/noise ratio. The obtained results demonstrate that the Ag nanoparticles sensor has a great potential as SERS substrate.     

Wide range temperature detection with hybrid nanoparticles traced by surface-enhanced Raman scattering

We report on the fabrication of a class of surface-enhanced Raman scattering(SERS)active thermometers,which consists of60 nm gold nanoparticles,encoded with Raman-active dyes,and a layer of thermoresponsive poly(N-isopropylacrylamide)(PNIPAM)brush with different chain lengths.These SERS-active nanoparticles can be optimized to maintain spectrally silent when staying as single particles in dispersion.Increasing temperature in a wide range from 25 to 55°C can reversibly induce the interparticle self-aggregation and turn on the SERS fingerprint signals with up to 58-fold of enhancement by taking advantage of the interparticle plasmonic coupling generated in the process of thermo-induced nanoparticles self-aggregation.Moreover,the most significative point is that these SERS probes could maintain their response to temperature and present all fingerprint signals in the presence of a colored complex.However,the UV-Vis spectra can distinguish the differences faintly and the solution color shows little change in such complex mixture.This proof-of-concept and Raman technique applied here allow for dynamic SERS platform for onsite temperature detection in a wide temperature range and offer unique advantages over other detection schemes.     

Surface-enhanced Raman scattering of EDOT and PEDOT on silver and gold nanoparticles

Surface-enhanced Raman scattering (SERS) spectra of the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) and its monomer 3,4-ethylenedioxythiophene (EDOT) on Ag and Au nanoparticles presenting different morphologies and stabilizing agents have been obtained using the excitation radiation at 633 nm. The SERS spectra of the monomer and polymer are strongly dependent both on the metal and capping agent of the substrate. SERS spectra of EDOT on Au nanospheres indicates that adsorption occurs with the thiophene ring perpendicular to the metal surface. In contrast, polymerization takes place on the silver surface of Ag nanospheres. EDOT adsorption on Ag nanoprisms with polyvinylpyrrolidone (PVP) as capping agent occurs similarly to that observed on gold. Surface-enhanced resonance Raman scattering (SERRS) spectra of PEDOT on gold nanostars that present a thick layer of PVP show no chemical interaction of PEDOT with the metal surface; however, when PEDOT is adsorbed on citrate stabilized gold nanospheres, the SERRS spectra suggest that thiophene rings are perpendicular to the surface. Oxidation of PEDOT also is observed on Ag nanospheres. The investigation of the interface between PEDOT and metal surface is crucial for the development in polymer-based optoelectronic devices since this interface plays a crucial role in their stability and performance.     

Surface enhanced raman scattering of aromatic thiols adsorbed on nanostructured gold surfaces

In this paper we describe the use of a simple and versatile technique of templated electrodeposition through polystyrene sphere templates to produce nanostructured films of gold with regular submicron spherical holes arranged in a hexagonal close-packed structure. The templates were produced by self assembly of a monodispersed suspension of polystyrene spheres on gold substrates using capillary forces. The self assembly process was modified through the chemical modification of the gold substrate with cysteamine thiol. Films of gold were prepared by electrochemical deposition through the template. The electrochemical deposition charge and the current time curve were used to control the film height with a precision of approximately 10 nm. The colour of the nanostructured films changed as the film thickness was changed. Surface enhanced Raman Scattering spectra were recorded and used to identify very low concentrations of aromatic thiol molecules, 4-Nitrobenzenethiol (4-NBT) and 4-Aminobenzenethiol (4-ABT), adsorbed on the surface of the nanostructured gold substrates.      

The ultratrace detection of crystal violet using surface enhanced Raman scattering on colloidal Ag nanoparticles prepared by electrolysis

Highly active,stable and affordable surface enhanced Raman scattering(SERS) substrates were obtained by electrolyzing a mixture of AgNO_3(4×10~(-4) mol/L) and Na_3C_6H_5O_7·H_2O(6×10~(-5) mol/L) for 1,2,3 and 4h at 7V.With crystal violet(CV) as a test molecule,a portable Raman spectrometer with 785 nm laser excitation was employed to carry out the SERS detection.Colloidal Ag nanoparticles prepared by electrolyzing for 3 h with the particle size of(65±17) nm is a perfect SERS substrate for the ultratrace ...     

Synthesis of gold@carbon dots composite nanoparticles for surface enhanced Raman scattering

Gold@carbon dots composite nanoparticles (Au@CDs) with ultrathin carbon dot (CD) shells of ca. 2 nm were prepared by reducing HAuCl(4) with CDs at 100 °C. By adjusting the feeding mass ratio of HAuCl(4) to CDs, the average diameters of Au@CDs can be modulated from 8 to 44 nm. The suspension of Au@CDs with an average diameter of ca. 24 nm was applied as a substrate for surface enhanced Raman scattering (SERS) and it exhibited a higher SERS effect for rhodamine 6G (Rh6G) than the suspension of pure Au nanoparticles with nearly the same size. The excellent SERS effect of Au@CDs is mainly attributed to their improved capability of adsorbing the aromatic probe molecules.     

Multiple detection of proteins by SERS-based immunoassay with core shell magnetic gold nanoparticles

A highly selective and sensitive surface-enhanced Raman scattering (SERS)-based immunoassay for the multiple detection of proteins has been developed. The proposed core shell magnetic gold (Au) nanoparticles allow for successful protein separation and high SERS enhancement for protein detection. To selectively detect a specific protein in a mixed protein solution, we employed the sandwich type SERS immunoassay with core shell magnetic Au nanoparticles utilizing specific antigen–antibody interactions. Based on this proposed SERS immunoassay, we can successfully detect proteins in very low concentrations (∼800 ag/mL of mouse IgG and ∼5 fg/mL of human IgG) with high reproducibility. Magnetically assisted protein separation and detection by this proposed SERS immunoassay would provide great potential for effective and sensitive multiple protein detection. This technique allows for the straightforward SERS-based bioassays for quantitative protein detections.     

Cu掺杂TiO_2作为SERS基底的研究

本文采用溶胶-水热法制备了TiO2及Cu掺杂的TiO2纳米粒子作为表面增强拉曼光谱(SERS)活性基底,观察到当4-巯基苯甲酸吸附在3%Cu掺杂的TiO2表面上时,其SERS信号得到了最大程度的增强.Cu离子掺杂进TiO2晶格时会使TiO2表面的缺陷浓度(表面态)得到增加,一定量的缺陷浓度对TiO2-to-Molecule的电荷转移机理起到促进作用,进一步证明了化学增强机理在SERS现象的贡献.     

A study of DFT and surface enhanced Raman scattering in silver colloids for thymine

The vibrational spectrum of crystal thymine is calculated by density functional theory (DFT) at the B3LYP complex function. Considering the effect of intermolecular H-bonds, we add two water molecules that can form H-bonds with the CO and NH groups of thymine. The experimental spectra of normal Raman of thymine in solid state and surface enhanced Raman (SERS) of thymine adsorbed in silver colloids are presented in this study. The calculated Raman spectrum of thymine by DFT is in agreement with the experimental result of normal Raman spectrum. The appearance of new bands of thymine in SERS shows that molecules of thymine are adsorbed in the surface of silver nanoparticles with a perpendicular orientation through an oxygen atom (O7).     

Ordered gold nanoparticle arrays as surface-enhanced Raman spectroscopy substrates for label-free detection of nitroexplosives

Nitroexplosives, such as 2,4,6-trinitrotoluene (TNT) which is a leading example of nitroaromatic explosives, are causing wide concern. Motivated by the urgent demand for trace analysis of explosives, novel surface-enhanced Raman spectroscopy substrates based upon highly ordered Au nanoparticles have been fabricated by a simple droplet evaporation method. It is noteworthy that an ethylhexadecyldimethyl ammonium bromide bilayer surrounding each individual nanoparticle not only is responsible for these periodic gap structures, but also tends to promote the adsorption of TNT on the composite NPs, thus resulting in a considerable increase of Raman signal. These desirable features endow the resulting SERS substrates with excellent enhancement ability and allow for a label-free detection of common plastic explosive materials even with a concentration as low as 10⁻⁹ M.     

Streptococcus suis II immunoassay based on thorny gold nanoparticles and surface enhanced Raman scattering

An immunoassay based on surface enhanced Raman scattering (SERS) spectroscopy was developed to detect muramidase released protein (MRP) antibody against Streptococcus suis II (SS2) utilizing thorny gold nanoparticles (tAuNPs) as SERS substrates. Initially, tAuNPs with multi-branches were prepared by the seed-mediated growth method in the absence of templates and surfactants, facilitating p-mercaptobenzoic acid (pMBA) conjugation covalently onto the tAuNPs through S-Au bonds. The obtained immuno-SERS tag affording strong Raman signals made it possible to establish an application of indirect detection of the MRP antibody against SS2 with a sandwich assay at a highly sensitive level. The Raman intensity at 1588 cm(-1) was proportional to the logarithm of the concentration of MRP antibody in the range of 10 pg mL(-1) to 0.1 μg mL(-1). The detection sensitivity was significantly improved to 0.1 pg mL(-1) by using the immuno-SERS tags. Furthermore, the proposed SERS approach was applied to detect MRP antibody in pig serum samples, and the results agreed well with those of ELISA, indicating great potential for clinical application in diagnostic immunoassays.     

Surface-enhanced Raman scattering measurements on silver nanoparticles covered with differently formed platinum films

Gold and silver electromagnetic nanoresonators covered by a thin layer of platinum are often used to study adsorption of various molecules on “model platinum surfaces” with surface-enhanced Raman scattering (SERS) spectroscopy. In this contribution spectra of pyridine adsorbed on films formed from core–shell Ag@Pt and Ag@Ag–Pt nanoparticles and pure Pt or Ag nanoparticles were measured using a confocal Raman microscope. The SERS spectra of pyridine adsorbed on alloy Ag@Ag–Pt nanoparticles could not be obtained as a linear combination of spectra measured on pure Ag and Pt surfaces. In other words, for silver electromagnetic nanoresonators covered by platinum there is no simple correlation between the “quality” of the deposited Pt layer and the relative intensity of SERS bands characteristic for adsorbate interacting with silver. The SERS spectra accumulated from various places of a film formed from Ag@Pt or Ag@Ag–Pt nanoclusters may differ significantly. Using Ag@Pt nanoparticles with practically negligible amount of Ag on the surface (as per the stripping measurement), it is possible to record SERS spectrum in which the contribution characteristic for pyridine adsorbed on the Ag surface is well visible. It means that, even for macroscopic samples of core–shell Ag–Pt nanoparticles, averaging of many spectra measured at various locations of the sample should be carried out to characterize reliably their properties.     

Non-labeling multiplex surface enhanced Raman scattering (SERS) detection of volatile organic compounds (VOCs)

In this paper, we report multiplex SERS based VOCs detection with a leaning nano-pillar substrate. The VOCs analyte molecules adsorbed at the tips of the nano-pillars produced SERS signal due to the field enhancement occurring at the localized surface plasmon hot spots between adjacent leaning nano-pillars. In this experiment, detections of acetone and ethanol vapor at different concentrations were demonstrated. The detection limits were found to be 0.0017 ng and 0.0037 ng for ethanol and acetone vapor molecules respectively. Our approach is a non-labeling method such that it does not require the incorporation of any chemical sensing layer for the enrichment of gas molecules on sensor surface. The leaning nano-pillar substrate also showed highly reproducible SERS signal in cyclic VOCs detection, which can reduce the detection cost in practical applications. Further, multiplex SERS detection on different combination of acetone and ethanol vapor was also successfully demonstrated. The vibrational fingerprints of molecular structures provide specific Raman peaks for different VOCs contents. To the best of our knowledge, this is the first multiplex VOCs detection using SERS. We believe that this work may lead to a portable device for multiplex, specific and highly sensitive detection of complex VOCs samples that can find potential applications in exhaled breath analysis, hazardous gas analysis, homeland security and environmental monitoring.     

Surface-enhanced Raman scattering for protein detection

Proteins are essential components of organisms and they participate in every process within cells. The key characteristic of proteins that allows their diverse functions is their ability to bind other molecules specifically and tightly. With the development of proteomics, exploring high-efficiency detection methods for large-scale proteins is increasingly important. In recent years, rapid development of surface-enhanced Raman scattering (SERS)-based biosensors leads to the SERS realm of applications from chemical analysis to nanostructure characterization and biomedical applications. For proteins, early studies focused on investigating SERS spectra of individual proteins, and the successful design of nanoparticle probes has promoted great progress of SERS-based immunoassays. In this review we outline the development of SERS-based methods for proteins with particular focus on our proposed protein-mediated SERS-active substrates and their applications in label-free and Raman dye-labeled protein detection. Figure Protein-mediated SERS-active substrates for protein detection     

Surface enhanced Raman scattering from layered assemblies of close-packed gold nanoparticles

A synthetic method of ordering hydrophilic gold nanoparticles into a close-packed two-dimensional array at a hexane-water interface and subsequent transferring of such structure onto a solid substrate is described. By repeating the transfer process, multilayered gold nanoparticle films are formed without need of linker molecules. Their surface enhanced Raman scattering (SERS) efficiencies are compared as a function of the number of layers. It is shown that both the number of layers and the particle size contribute to SERS phenomenon. Judging from the noticeable dependence of SERS efficiency on the nanometer scale architecture, the close-packed nanoparticle formation at an immiscible interface presents a facile route to the preparation of highly active and relatively clean SERS substrates by controlling both the particle size and the film thickness. Among the investigated samples, the gold nanoparticle film assembled with quintuple layers of 30 nm diameter particles showed the maximum SERS efficiency.