A comparison of the effect of nanotube chirality and electronic properties on the π–π interaction of single‐wall carbon nanotubes with pyrazinamide antitubercular drug

Theoretical investigation on local electronic structure and stability of the π–π stacking interaction of pyrazinamide (PZA) with armchair (5,5) and zigzag (9,0) single‐walled carbon nanotubes (SWCNTs) is performed using density functional theory (DFT). PZA is physisorbed onto nanotube sidewall through interaction of π orbitals of PZA and SWCNT and the enhanced structural stability of PZA/SWCNT systems is due to weak side‐on rather than the head‐on π‐interactions. The physisorption of PZA onto SWCNT sidewall is thermodynamically favored; as a consequence, it modulates the electronic properties of pristine nanotube in the vicinity of Fermi region and π–π stacked interactions is stronger in (9,0) SWCNT compared to (5,5) SWCNT. The density of states (DOS) analysis show that PZA contributes toward the enhancement of electronic states. Projected DOS and frontier orbital analysis in the vicinity of Fermi level region suggest the electronic states to be contributed from SWCNT rather than PZA. In addition, hybrid DFT calculation which includes the dispersion correction is employed to explain the non‐covalent π–π stacking interaction between PZA and SWCNT. The local density approximation and GGA results are compared with DFT‐D to explain near about accurately the weak nonbonded van der Waals interactions between PZA and SWCNTs. © 2012 Wiley Periodicals, Inc.     

First-principles study of a new type nanojunction: Finite length carbon chain inserted into half of a carbon nanotube

Based on first-principles calculations, we investigate the structure and electronic properties of a carbon atomic chain in finite length inserted into half of a single walled carbon nanotube (SWCNT), which we called half chain@SWCNT or more generally HCS. Comparing the optimized structure of HCS with that of the same chiral indices SWCNT and all carbon chain inserted SWCNT, we find that the geometry of the tube in HCS is slightly altered due to the weakly interacting between the inserted chain and the outer tube wall of HCS. Our calculation of band structure indicates that the armchair (5, 5) HCS exhibits metallic character, which is as that of (5, 5) SWCNT and all carbon chain inserted (5, 5) SWCNT. The zigzag (8, 0) and (9, 0) HCSs have small change in the energy gap compared to the corresponding pristine ones. Due to the downshift of conduction bands originating from the carbon chain, the calculation of band structure shows that chiral (6, 4) HCS is a semiconductor system with a small band gap of 0.94 eV, less than 1.125 eV in pristine SWCNT. The studied HCSs with unique structure and electronic property may construct a new generation nanoscale junctions without the usual heptagon–pentagon defect pair considerations.     

Combined Raman spectroscopy and transmission electron microscopy studies of a NanoBud structure

We succeeded in providing for the first time the evidence of the NanoBud structure (fullerenes attached to the surface of SWCNT) by Raman spectroscopy in combination with TEM. This work was performed on the individual freestanding NanoBud structure. The Raman features corresponding to the typical vibrational modes of fullerenes were observed in the range of 1440-1480 cm(-1). The simultaneous presence of SWCNT and fullerene features in the Raman spectrum is in good agreement with the TEM and ED investigations on the same NanoBud structure, which confirmed the Raman measurement interpretation of the SWCNT chirality assignment (16,11) and the presence of fullerenes on the surface of the SWCNT.     

Poly(γ‐benzyl‐L‐glutamate)‐functionalized single‐walled carbon nanotubes from surface‐initiated ring‐opening polymerizations of N‐carboxylanhydride

Single‐walled carbon nanotubes (SWCNTs) have been functionalized with poly(γ‐benzyl‐L ‐glutamate) (PBLG) by ring‐opening polymerizations of γ‐benzyl‐L ‐glutamic acid‐based N‐carboxylanhydrides (NCA‐BLG) using amino‐functionalized SWCNTs (SWCNT‐NH₂) as initiators. The SWCNT functionalization has been verified by FTIR spectroscopy and transmission electron microscopy. The FTIR study reveals that surface‐attached PBLGs adopt random‐coil conformations in contrast to the physically absorbed or bulk PBLGs, which exhibit α‐helical conformations. Raman spectroscopic analysis reveals a significant alteration of the electronic structure of SWCNTs as a result of PBLG functionalization. The PBLG‐functionalized SWCNTs (SWCNT‐PBLG) exhibit enhanced solubility in DMF. Stable DMF solutions of SWCNT‐PBLG/PBLG with a maximum SWCNTs concentration of 259 mg L^?1 can be readily obtained. SWCNT‐PBLG/PBLG solid composites have been characterized by differential scanning calorimetry, thermogravimetric analysis, wide/small‐angle X‐ray scattering (W/SAXS), scanning electron microscopy, and polarized optical microscopy for their thermal or morphological properties. Microfibers containing SWCNT‐PBLG and PBLG can also be prepared via electrospinning. WAXS characterization reveals that SWCNTs are evenly distributed among PBLG rods in solution and in the solid state where PBLGs form a short‐range nematic phase interspersed with amorphous domains. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2340–2350, 2010     

Carbon Nanotubes Modified Graphite Electrodes for Monitoring of Biointeraction Between 6‐Thioguanine and DNA

In this present study, single‐walled carbon nanotubes (SWCNT) modified disposable pencil graphite electrodes (SWCNT‐PGEs) were developed for the electrochemical monitoring of anticancer drug, and its interaction with double stranded DNA (dsDNA). Under this aim, SWCNT‐PGEs were applied for the first time in the literature to analyse of 6‐Thioguanine (6‐TG), and also to investigate its interaction with DNA by voltammetric and impedimetric methods. The surface morphologies of PGE and SWCNT‐PGE were explored using scanning electron microscopy (SEM) and electrochemical characterization of unmodified/modified electrodes was performed by cyclic voltammetry (CV). Experimental parameters; such as, the concentration of 6‐TG and its interaction time with dsDNA were optimized by using differential pulse voltammetry (DPV). Additionally, the interaction of 6‐TG with dsDNA was studied in case of different interaction times by electrochemical impedance spectroscopy (EIS) in contrast to voltammetric results. The detection limit of 6‐TG was found to be 0.25 μM by SWCNT‐PGE.     

Theoretical investigation of the stability,electronic and magnetic properties of thiolated single‐wall carbon nanotubes

The addition of SH and OH groups to single‐wall carbon nanotubes (SWCNTs) was investigated employing first principles calculations. In the case of the semiconducting (10, 0) SWCNT the SWCNT‐SH binding energy is weak, 2–4 kcal/mol. However, for the metallic (5, 5) SWCNT it is larger, 7–9 kcal/mol. Thus metallic SWCNTs seem to be more reactive to SH than the semiconducting ones. Indeed, the (6, 6) SWCNT is more reactive to SH than the (10, 0) SWCNT, by 2–3 kcal/mol, something that can be explained only considering the electronic structure of the tube, because the (6, 6) has a larger diameter. The binding energies are larger for the addition of the OH group, 25 and 30 kcal/mol for the (10, 0) and (5, 5) SWCNTs, respectively. When a single OH or SH group is attached to the metallic SWCNTs, we observe important changes in the DOS at the Fermi level. However, when multiple SH groups are attached, the changes in the electronic and magnetic properties depend on the position of the SH groups. The small binding energy found for the SH addition indicates that the successful functionalization of SWCNTs with SH, SCH₃, and S(CH₂)_nSH groups is mostly due to the presence of defects created after acid treatment and to a minor extent by the metallic tubes present in the samples. Perfect semiconducting SWCNTs showed very low reactivity against the SH group. © 2008 Wiley Periodicals, Inc. Int J Quantum Chem, 2009     

Enhanced CO2 adsorptivity of SWCNT by polycyclic aromatic hydrocarbon intercalation

We tuned the electronic properties of single wall carbon nanotube (SWCNT) with intercalation of naphthalene derivatives (NDs) having different electron donor or acceptor property in the SWCNT bundles. Characterization of the adsorbed SWCNT with Raman spectroscopy and electrical conductivity measurement clearly indicate the charge transfer interaction of ND molecules with SWCNT. Also X-ray diffraction supports the intercalation of ND molecules in the interstitial spaces and groove sites of SWCNT bundle. Intercalation of ND molecules enhances remarkably the CO₂ adsorptivity, which can be ascribed to the key importance of the interaction of the quadrupole moment of CO₂ with the local electrical field on the SWCNT induced by the charge transfer interaction.     

Structural,Vibrational and Electronic Properties of Defective Single‐Walled Carbon Nanotubes Functionalised with Carboxyl Groups: Theoretical Studies

Covalent sidewall functionalisation of defective zigzag single‐walled carbon nanotubes [SWCNTs(10,0)] with COOH groups is investigated by using DFT. Four types of point defects are considered: vacancy (V), divacancy [V₂(5‐8‐5), V₂(555‐777)], adatom (AA) and Stone–Wales (SW). The energetic, structural, electronic and vibrational properties of these systems are analysed. Decreasing reactivity is observed in the following order: AA>V>V₂(555‐777)>V₂(5‐8‐5)>SW. These studies also demonstrate that the position in which a carboxyl group is attached to a defective SWCNT is of primary importance. Saturation of two‐coordinate carbon atoms in systems with the vacancy V‐7 and with the adatom AA‐1(2) is 3.5–4 times more energetically favourable than saturation of three‐coordinate carbon atoms for all studied systems. Vibrational analysis for these two systems shows significant redshifts of the ν(C?O) stretching vibration of 96 and 123 cm^?1 compared to that for carboxylated pristine systems. Detailed electronic‐structure analysis of the most stable carboxylated systems is also presented.     

Theoretical Insights into Chirality‐Controlled SWCNT Growth from a Cycloparaphenylene Template

A self‐assembly mechanism for low‐temperature SWCNT growth from a [6]cycloparaphenylene ([6]CPP) precursor via ethynyl (C₂H) radical addition is presented, based on non‐equilibrium quantum chemical molecular dynamics (QM/MD) simulations and density functional theory (DFT) calculations. This mechanism, which maintains the (6,6) armchair chirality of a SWCNT fragment throughout the growth process, is energetically more favorable than a previously proposed Diels–Alder‐based growth mechanisms [E. H. Fort, et al., J. Mater. Chem. 2011 , 21, 1373]. QM/MD simulations and DFT calculations show that C₂H radicals play dual roles during SWCNT growth, by abstracting hydrogen from the SWCNT fragment and providing the carbon source necessary for growth itself. Simulations demonstrate that chirality‐controlled SWCNT growth from macrocyclic hydrocarbon seed molecules with pre‐selected edge structure can be accomplished when the reaction conditions are carefully selected for hydrogen abstraction by radical species during the growth process.     

低维无机功能材料的氢化调控研究

低维无机功能材料电学行为的调控主要依赖于本征异质原子掺杂，但是该方法在性质调控的同时，由于异质原子的嵌入常导致原有晶体结构对称性发生改变，产生变形扭曲甚至破坏．目前，基于清晰结构调控无机材料功能性依然是极具挑战性的难题．氢作为一种小半径轻原子，对低维无机功能材料的修饰或嵌入为调控无极功能材料物性带来了新思路，特别是通过氢的嵌入可以在结构不发生大变化的前提下调制材料载流子浓度并提升导电率，这已逐渐成为低维无机材料电学行为调控的重要途径．本文概述了近年来发展的系列氢化调控方法，以及通过对电子结构调制实现对电学行为的调控，并基于此广泛应用于能源领域、电子器件及催化等方面．     

Electrochemical Analysis of Acrylamide Using Screen‐Printed Carboxylated Single‐Walled Carbon Nanotube Electrodes

Acrylamide (AA) was electrochemically detected and quantified by means of its voltammetric response on carboxylic modified Single‐Walled Carbon Nanotube Screen Printed Electrodes (COOH‐SWCNT‐SPEs). The electroreduction signal of AA was proportional to AA concentration at low values (below 300 µM) and the observed sensitivity was explained in terms of AA adsorption on the COOH‐SWCNT‐SPEs that was demonstrated using the electrochemical response of [Fe(CN)₆]^3? and [Fe(CN)₆]^4? and Raman spectroscopy experiments. In order to test the suggested analytic approach (LOD of 0.03 µM, LOQ of 0.04 µM), detection and quantification of AA in fried potatoes was carried out using the proposed electrochemical method and HPLC. Both techniques showed similar contents of AA.     

DFT calculations of structures, 13C NMR chemical shifts,and Raman RBM mode of simple models of small‐diameter zigzag (4,0) carboxylated single‐walled carbon nanotubes

Linearly conjugated benzene rings (acenes), belt‐shaped molecules (cyclic acenes), and models of single‐walled carbon nanotubes (SWCNTs) with one carboxylic group at the open end were fully optimized at the B3LYP/6‐31G* level of theory. These models were selected to obtain some insight into the nuclear isotropic changes resulting from systematically increasing the basic building units of open‐tip‐monocarboxylated SWCNTs. In addition, the position of radial breathing mode (RBM), empirically correlated with the SWCNT diameter, was directly related with the radius of model cyclic acene rings. A regular convergence of selected structural, NMR, and Raman parameters with the molecular system size increase was observed, and a simple two‐parameter mathematical formula enabled their estimation in infinity. The predicted ¹³C NMR chemical shifts of carbon atoms close to the substituted rim of carboxylated models of zigzag (4,0) SWCNTs differed significantly from the pristine nanotubes. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis and characterization of polyethylene chains grafted onto the sidewalls of single‐walled carbon nanotubes via copolymerization

Polyethylene (PE) chains grafted onto the sidewalls of SWCNTs (SWCNT‐g‐PE) were successfully synthesized via ethylene copolymerization with functionalized single‐walled carbon nanotubes (f‐SWCNTs) catalyzed by rac‐(en)(THInd)₂ZrCl₂/MAO. Here f‐SWCNTs, in which α‐alkene groups were chemically linked on the sidewalls of SWCNTs, were synthesized by Prato reaction. The composition and microstructure of SWCNT‐g‐PE were characterized by means of ¹H NMR, Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, thermogravimetric analyses (TGA), field‐emission scanning electron microscope (FESEM), and transmission electron microscope (TEM). Nanosized cable‐like structure was formed in the SWCNT‐g‐PE, in which the PE formed a tubular shell and several SWCNTs bundles existed as core. The formation of the above morphology in the SWCNT‐g‐PE resulted from successfully grafting of PE chains onto the surface of SWCNTs via copolymerization. The grown PE chains grafted onto the sidewall of the f‐SWCNTs promoted the exfoliation of the mass nanotubes. Comparing with pure PE, the physical mixture of PE/f‐SWCNTs and in situ PE/SWCNTs mixture, thermal stability, and mechanical properties of SWCNT‐g‐PE were higher because of the chemical bonding between the f‐SWCNTs and PE chains. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5459–5469, 2007     

Thermoreversible gelation of helical polypeptide/single‐walled carbon nanotubes and their solid‐state structures

Single‐walled carbon nanotubes (SWCNTs) have been functionalized with poly(γ‐benzyl‐L ‐glutamate)s (PBLGs) having well‐defined polymer molecular weight (M_n = 7.5–21.1 kg·mol^?1) and molecular weight distribution (PDI = 1.05–1.20) by a graft‐to method. Toluene solutions containing 5 wt % free PBLG and variable amounts of PBLG‐functionalized SWCNTs (PBLG‐SWCNTs) form gels at room temperature. Differential scanning calorimetry (DSC) analysis reveals that the gelation occurs thermoreversibly, in accord with previous studies on the pristine PBLG/toluene gels. The heat of gel melting (ΔH_m) is slightly elevated for the composite gels compared with the pristine gel, which suggests enhanced interactions between PBLGs in the former. But the gelation temperatures of the composites are unaffected by the presence of PBLG‐SWCNTs. Small‐angle X‐ray scattering (SAXS) analysis of the composite and pristine gels at different temperatures by the Guinier method suggests that PBLG‐SWCNTs promote interactions between PBLG rods, as indicated by the larger PBLG bundle size with increasing PBLG‐SWCNT content in the gel and the melt state. W/SAXS analysis of the dry gels reveals that PBLG‐SWCNTs induce significant changes in the PBLG packing order, resulting in a nematic phase, in contrast to a weakly ordered smectic C phase containing tilted PBLG rods that is observed in the pristine gel. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Density functional and molecular docking studies towards investigating the role of single-wall carbon nanotubes as nanocarrier for loading and delivery of pyrazinamide antitubercular drug onto pncA protein

The potential biomedical application of carbon nanotubes (CNTs) pertinent to drug delivery is highly manifested considering the remarkable electronic and structural properties exhibited by CNT. To simulate the interaction of nanomaterials with biomolecular systems, we have performed density functional calculations on the interaction of pyrazinamide (PZA) drug with functionalized single-wall CNT (fSWCNT) as a function of nanotube chirality and length using two different approaches of covalent functionalization, followed by docking simulation of fSWCNT with pncA protein. The functionalization of pristine SWCNT facilitates in enhancing the reactivity of the nanotubes and formation of such type of nanotube-drug conjugate is thermodynamically feasible. Docking studies predict the plausible binding mechanism and suggests that PZA loaded fSWCNT facilitates in the target specific binding of PZA within the protein following a lock and key mechanism. Interestingly, no major structural deformation in the protein was observed after binding with CNT and the interaction between ligand and receptor is mainly hydrophobic in nature. We anticipate that these findings may provide new routes towards the drug delivery mechanism by CNTs with long term practical implications in tuberculosis chemotherapy.     

Electronic structures and spectroscopic regularities of phenylene-modified SWCNTs

The equilibrium geometries and electronic structures for a series of single-wall carbon nanotubes (SWCNTs) modified with phenylene were studied using the density functional theory (DFT) at the B3LYP/6-31G(d) level. Of the four configurations of the phenylene-modified SWCNTs, the v-configuration in which the bond is perpendicular to the main axis of the SWCNT is the most thermodynamically stable. The increase in radii of the modified SWCNTs generally leads to a decrease in the energy gaps. The first absorptions in the electronic spectra of the modified SWCNTs compared with those in the electronic spectra of pristine SWCNTs are basically red-shifted. The chemical shifts of bridged carbon atoms connected with phenylene in the v-configuration are shifted downfield relative to those of the pristine SWCNTs. The aromaticity of the rings in SWCNTs is improved owing to the addition of phenylene.     

A theoretical study on the effect of intercalating sulfur atom and doping boron atom on the adsorption of hydrogen molecule on (10,0) single-walled carbon nanotubes

Adsorption of molecular hydrogen on single-walled carbon nanotube (SWCNT), sulfur-intercalated SWCNT (S-SWCNT), and boron-doped SWCNT (BSWCNT), have been studied by means of density functional theory (DFT). Two methods KMLYP and local density approximation (LDA) were used to calculate the binding energies. The most stable configuration of H₂ on the surface of pristine SWCNT was found to be on the top of a hexagonal at a distance of 3.54 Å in good agreement with the value of 3.44 Å reported by Han and Lee (Carbon, 2004, 42, 2169). KMLYP binding energies for the most stable configurations in cases of pristine SWCNT, S-SWCNT, and BSWCNT were found to be ?2.2 kJ mol^?1, ?3.5 kJ mol^?1, and ?3.5 kJ mol^?1, respectively, while LDA binding energies were found to be ?8.8 kJ mol^?1, ?9.7 kJ mol^?1, and ?4.1 kJ mol^?1, respectively. Increasing the polarizability of hydrogen molecule due to the presence of sulfur in sulfur intercalated SWCNT caused changes in the character of its bonding to sulfur atom and affected the binding energy. In H₂-BSWCNT system, stronger charge transfer caused stronger interaction between H₂ and BSWCNT to result a higher binding energy relative to the binding energy for H₂-SWCNT.     

A density functional theory study of van der Waals interaction in carbon nanotubes

In this article, we investigate the effect of van der Waals force in zigzag carbon nanotubes (CNTs) including single-wall CNT (SWCNT) and double-walled CNT (DWCNT) structures with several interaction configurations. The solid-state density functional theory is employed to calculate the geometric optimization, normal mode frequencies, and IR and Raman spectra with the periodic boundary condition. For SWCNTs, we find that the Raman intensity is not affected by the tube diameter or the electronic structure. The IR absorption, however, increases with the tube diameter. We find that the close metallicity of the electronic structure has a significant impact on the IR simulations. When the van der Waals force is applied outside the CNTs at a distance longer than 3.0, the effect on Raman spectra is minimal but some effects can still be confirmed by IR absorption. When the van der Waals force acts inside the CNTs, the effect on the spectrum can be observed, especially at a distance of 2.8 Å, both IR and Raman can be significantly enhanced in many modes.     

Polyelectrolyte‐Assisted Noncovalent Functionalization of Carbon Nanotubes with Ordered Self‐Assemblies of a Water‐Soluble Porphyrin

The self‐assembly and induced supramolecular chirality of meso‐tetrakis(4‐sulfonatophenyl)porphyrin (TSPP) on both single‐wall (SWCNT) and multiwall carbon nanotubes (MWCNT) are investigated. Under mild pH conditions (pH 3), TSPP forms aggregates when CNTs are dispersed in an aqueous solution containing positively charged polyelectrolytes such as poly‐L ‐lysine (PLL) or poly(allylamine hydrochloride) (PAH). Evidence for the geometry of the porphyrin aggregates is obtained from absorption spectra, whereby the fingerprints of J‐ and H‐aggregates are clearly seen only in the presence of smaller‐diameter nanotubes. J‐aggregates are better stabilized with PLL, whereas in the presence of PAH mainly H‐aggregates prevail. Excited‐state interactions within these nanohybrids are studied by steady‐state and time‐resolved fluorescence. The porphyrin emission intensity in the nanohybrid solution is significantly quenched compared to that of TSPP alone, and this implies strong electronic interaction between CNTs and porphyrin molecules. Fluorescence lifetime imaging microscopy (FLIM) further supports that porphyrin arrays are associated with the MWCNT sidewalls wrapped in PLL. In the case of the SWCNT hybrid, spherical structures associated with longer fluorescence lifetime appeared after one week, indicative of H‐aggregates of TSPP. The latter are the result of π–π stacking of porphyrin units on neighboring nanotubes facilitated by the strong tendency of these nanotubes to interact with each other. These results highlight the importance of optimum dimensions and surface‐area architectures of CNTs in the control/stability of the porphyrin aggregates with promising properties for light harvesting.     

Interaction of Inorganic Nanoparticles with Graphene

The changes in the electronic and magnetic properties of graphene induced by interaction with semiconducting oxide nanoparticles such as ZnO and TiO₂ and with magnetic nanoparticles such as Fe₃O₄, CoFe₂O₄, and Ni are investigated by using Raman spectroscopy, magnetic measurements, and first‐principles calculations. Significant electronic and magnetic interactions between the nanoparticles and graphene are found. The findings suggest that changes in magnetization as well as the Raman shifts are directly linked to charge transfer between the deposited nanoparticles and graphene. The study thus demonstrates significant effects in tailoring the electronic structure of graphene for applications in futuristic electronic devices.