Organoantimony(III)‐Containing Tungstoarsenates(III): From Controlled Assembly to Biological Activity

A family of three sandwich‐type, phenylantimony(III)‐containing tungstoarsenates(III), [(PhSb^III){Na(H₂O)}As^III₂W₁₉O₆₇(H₂O)]^11? ( 1 ), [(PhSb^III)₂As^III₂W₁₉O₆₇(H₂O)]^10? ( 2 ), and [(PhSb^III)₃(B‐α‐As^IIIW₉O₃₃)₂]^12? ( 3 ), have been synthesized by one‐pot procedures and isolated as hydrated alkali metal salts, Cs₃K_3.5Na_4.5[(PhSb^III){Na(H₂O)}As^III₂W₁₉O₆₇(H₂O)]?41H₂O ( CsKNa ‐ 1 ), Cs_4.5K_5.5[(PhSb^III)₂As^III₂W₁₉O₆₇(H₂O)]?35H₂O ( CsK‐2 ), and Cs_4.5Na_7.5[(PhSb^III)₃(B‐α‐As^IIIW₉O₃₃)₂]?42H₂O ( CsNa ‐ 3 ). The number of incorporated {PhSb^III} units could be selectively tuned from one to three by careful control of the reaction parameters. The three compounds were characterized in the solid state by single‐crystal XRD, IR spectroscopy, and thermogravimetric analysis. The aqueous solution stability of sandwich polyanions 1 – 3 was also studied by multinuclear (¹H, ¹³C, ¹⁸³W) NMR spectroscopy. Effective inhibitory activity against six different kinds of bacteria was identified for all three polyanions, for which the activity increased with the number of incorporated {PhSb^III} groups.     

Spectroelectrochemical Properties and Catalytic Activity in Cyclohexane Oxidation of the Hybrid Zr/Hf-Phthalocyaninate-Capped Nickel(II) and Iron(II) tris-Pyridineoximates and Their Precursors

The in situ spectroelectrochemical cyclic voltammetric studies of the antimony-monocapped nickel(II) and iron(II) tris-pyridineoximates with a labile triethylantimony cross-linking group and Zr(IV)/Hf(IV) phthalocyaninate complexes were performed in order to understand the nature of the redox events in the molecules of heterodinuclear zirconium(IV) and hafnium(IV) phthalocyaninate-capped derivatives. Electronic structures of their 1e-oxidized and 1e-electron-reduced forms were experimentally studied by electron paramagnetic resonance (EPR) spectroscopy and UV−vis−near-IR spectroelectrochemical experiments and supported by density functional theory (DFT) calculations. The investigated hybrid molecular systems that combine a transition metal (pseudo)clathrochelate and a Zr/Hf-phthalocyaninate moiety exhibit quite rich redox activity both in the cathodic and in the anodic region. These binuclear compounds and their precursors were tested as potential catalysts in oxidation reactions of cyclohexane and the results are discussed.     

Visible‐Light‐Induced Photoredox Catalysis with a Tetracerium‐Containing Silicotungstate

The development of visible‐light‐induced photocatalysts for chemoselective functional group transformations has received considerable attention. Polyoxometalates (POMs) are potential materials for efficient photocatalysts because their properties can be precisely tuned by changing their constituent elements and structures and by the introduction of additional metal cations. Furthermore, they are thermally and oxidatively more stable than the frequently utilized organometallic complexes. The visible‐light‐responsive tetranuclear cerium(III)‐containing silicotungstate TBA₆[{Ce(H₂O)}₂{Ce(CH₃CN)}₂(μ₄‐O)(γ‐SiW₁₀O₃₆)₂] (CePOM; TBA=tetra‐n‐butylammonium) has now been synthesized; when CePOM was irradiated with visible light (λ>400 nm), a unique intramolecular Ce^III‐to‐POM(W^VI) charge transfer was observed. With CePOM, the photocatalytic oxidative dehydrogenation of primary and secondary amines as well as the α‐cyanation of tertiary amines smoothly proceeded in the presence of O₂ (1 atm) as the sole oxidant.     

Binary Pd–Polyoxometalates and Isolation of a Ternary Pd–V–Polyoxomolybdate Active Species for Selective Aerobic Oxidation of Alcohols

Binary Pd–polyoxometalates [Pd(dpa)₂]₃[PW₁₂O₄₀]₂ ? 12 DMSO ( 2 ), [Pd(dpa)₂]₃[PMo₁₂O₄₀]₂ ? 12 DMSO ? 2 H₂O ( 3 ), and [Pd(dpa)(DMSO)₂]₂[HPMo₁₀V₂O₄₀] ? 4 DMSO ( 4 ) were synthesized by reaction of [Pd(dpa)(OAc)₂] ? 2 H₂O ( 1 ; dpa=2,2′‐dipyridylamine) with three Keggin‐type polyoxometalates and fully characterized by single‐crystal and powder XRD analyses, IR spectroscopy, and elemental analyses. The synthesis is facile and straightforward, and the complicated ligand‐modification procedure often used in the traditional charge‐transfer method can be omitted. In 2 – 4 , Pd complexes and polyoxometalate anions are coupled through electrostatic interaction. Compound 4 is more active than the other three compounds in the selective aerobic oxidation of alcohols at ambient pressure. Interestingly, during catalytic recycling of compound 4 , unprecedented ternary Pd–V–polyoxometalate [Pd(dpa)₂{VO(DMSO)₅}₂][PMo₁₂O₄₀]₂ ? 4 DMSO ( 5 ), which was captured and characterized by single‐crystal XRD, proved to be the true active species and showed high catalytic activity for the selective aerobic oxidation of aromatic alcohols (98.1–99.8 % conversion, 91.5–99.1 % selectivity). Moreover, on the basis of control experiments and EPR and UV/Vis spectra, a plausible reaction mechanism for the oxidation of alcohols catalyzed by 5 was proposed.     

Carbon Monoxide Oxidation by Polyoxometalate‐Supported Gold Nanoparticulate Catalysts: Activity,Stability, and Temperature‐ Dependent Activation Properties

Nanoparticulate gold supported on a Keggin‐type polyoxometalate (POM), Cs₄[α‐SiW₁₂O₄₀]?n H₂O, was prepared by the sol immobilization method. The size of the gold nanoparticles (NPs) was approximately 2 nm, which was almost the same as the size of the gold colloid precursor. Deposition of gold NPs smaller than 2 nm onto POM (Au/POM) was essential for a high catalytic activity for CO oxidation. The temperature for 50 % CO conversion was ?67 °C. The catalyst showed extremely high stability for at least one month at 0 °C with full conversion. The catalytic activity and the reaction mechanism drastically changed at temperatures higher than 40 °C, showing a unique behavior called a U‐shaped curve. It was revealed by IR measurement that Au^δ+ was a CO adsorption site and that adsorbed water promoted CO oxidation for the Au/POM catalyst. This is the first report on CO oxidation utilizing Au/POMs catalysts, and there is a potential for expansion to various gas‐phase reactions.     

Nanostructured Manganese Oxides within a Ring-Shaped Polyoxometalate Exhibiting Unusual Oxidation Catalysis

Nanosized manganese oxides have recently received considerable attention for their synthesis, structures, and potential applications. Although various synthetic methods have been developed, precise synthesis of novel nanostructured manganese oxides are still challenging. In this study, using a structurally defined nanosized cavity inside a ring-shaped polyoxometalate, we succeeded in synthesizing two types of discrete 18 and 20 nuclear nanostructured manganese oxides, Mn18 and Mn20 , respectively. In particular, Mn18 showed much higher catalytic activity than other manganese oxides for the oxygenation of alkylarenes including electron-deficient ones, and the reaction proceeded through a unique reaction mechanism due to its unusual manganese oxide structure.     

PEPPSI‐Type Palladium Complexes Containing Basic 1,2,3‐Triazolylidene Ligands and Their Role in Suzuki–Miyaura Catalysis

A series of PEPPSI‐type palladium(II) complexes was synthesized that contain 3‐chloropyridine as an easily removable ligand and a triazolylidene as a strongly donating mesoionic spectator ligand. Catalytic tests in Suzuki–Miyaura cross‐coupling reactions revealed the activity of these complexes towards aryl bromides and aryl chlorides at moderate temperatures (50 °C). However, the impact of steric shielding was the inverse of that observed with related normal Nheterocyclic carbenes (imidazol‐2‐ylidenes) and sterically congested mesityl substituents induced lower activity than small alkyl groups. Mechanistic investigations, including mercury poisoning experiments, TEM analyses, and ESI mass spectrometry, provide evidence for ligand dissociation and the formation of nanoparticles as a catalyst resting state. These heterogeneous particles provide a reservoir for soluble palladium atoms or clusters as operationally homogeneous catalysts for the arylation of aryl halides. Clearly, the substitution of a normal N‐heterocyclic carbene for a more basic triazolylidene ligand in the precatalyst has a profound impact on the mode of action of the catalytic system.     

Heterogeneous Wheel‐Shaped Cu20‐Polyoxotungstate [Cu20Cl(OH)24(H2O)12(P8W48O184)]25− Catalyst for Solvent‐Free Aerobic Oxidation of n‐Hexadecane

The selective oxidation of alkanes as a green process remains a challenging task because partial oxidation is easier to achieve with sacrificial oxidants, such as hydrogen peroxide, alkyl hydroperoxides or iodosylbenzene, than with molecular oxygen or air. Here, we report on a heterogeneous catalyst for n‐hexadecane oxidation comprised of the wheel shaped Cu₂₀‐polyoxotungstate [Cu₂₀Cl(OH)₂₄(H₂O)₁₂(P₈W₄₈O₁₈₄)]^25? anchored on 3‐aminopropyltriethoxysilane (apts)‐modified SBA‐15. The catalysts were characterized by powder X‐ray diffraction (XRD), N₂‐adsorption measurements and Fourier transform infrared reflectance (FT‐IR) spectroscopy. The heterogeneous Cu₂₀‐polyanion system catalyzed the solvent‐free aerobic oxidation of n‐hexadecane to alcohols and ketones by using air as the oxidant under ambient conditions. The catalyst exhibits an exceptionally high turn over frequency (TOF) of 20 000 h^?1 at 150 °C and is resistant to poisoning by CS₂. Moreover, it can be easily recovered and reused by filtration without loss of its catalytic activity. Possible homogeneous contributions also have been examined and eliminated. Thus, this system can use air as oxidant, which, in combination with its good overall performance and poison tolerance, raises the prospect of this type of heterogeneous catalyst for practical applications.     

Cationic Titanocene(III) Complexes for Catalysis in Single‐Electron Steps

By exploiting solvent and anion effects, [Cp₂Ti]⁺ complexes for atom‐economical catalysis in single‐electron steps were developed and applied for the first time. These complexes constitute remarkably stable and active catalysts for radical arylations. The reaction kinetics and catalyst composition were studied by cyclic voltammetry and in situ IR spectroscopy.     

Cerium(IV)‐Driven Water Oxidation Catalyzed by a Manganese(V)–Nitrido Complex

The study of manganese complexes as water‐oxidation catalysts (WOCs) is of great interest because they can serve as models for the oxygen‐evolving complex of photosystem II. In most of the reported Mn‐based WOCs, manganese exists in the oxidation states III or IV, and the catalysts generally give low turnovers, especially with one‐electron oxidants such as Ce^IV. Now, a different class of Mn‐based catalysts, namely manganese(V)–nitrido complexes, were explored. The complex [Mn^V(N)(CN)₄]²⁻ turned out to be an active homogeneous WOC using (NH₄)₂[Ce(NO₃)₆] as the terminal oxidant, with a turnover number of higher than 180 and a maximum turnover frequency of 6 min⁻¹. The study suggests that active WOCs may be constructed based on the Mn^V(N) platform.     

Iron(II)‐Catalyzed Biomimetic Aerobic Oxidation of Alcohols

We report the first Fe^II‐catalyzed biomimetic aerobic oxidation of alcohols. The principle of this oxidation, which involves several electron‐transfer steps, is reminiscent of biological oxidation in the respiratory chain. The electron transfer from the alcohol to molecular oxygen occurs with the aid of three coupled catalytic redox systems, leading to a low‐energy pathway. An iron transfer‐hydrogenation complex was utilized as a substrate‐selective dehydrogenation catalyst, along with an electron‐rich quinone and an oxygen‐activating Co(salen)‐type complex as electron‐transfer mediators. Various primary and secondary alcohols were oxidized in air to the corresponding aldehydes or ketones with this method in good to excellent yields.     

多金属氧簇催化研究进展

多金属氧簇由于其组成和结构易于调控、具有酸性、氧化还原性、低毒性和低腐蚀性等优点,作为工业催化剂具有广阔的应用前景,是多酸化学领域的研究热点之一。本文综述了近5年来多金属氧簇在催化领域中研究的新进展,主要包括多金属氧簇的酸催化、氧化催化、双功能催化、加氢和活化二氧化碳合成碳酸酯等催化反应以及多金属氧簇的工业化应用等,并对未来发展趋势进行了展望。     

Donor‐Flexible Bis(pyridylidene amide) Ligands for Highly Efficient Ruthenium‐Catalyzed Olefin Oxidation

An exceptionally efficient ruthenium‐based catalyst for olefin oxidation has been designed by exploiting N,N′‐bis(pyridylidene)oxalamide (bisPYA) as a donor‐flexible ligand. The dynamic donor ability of the bisPYA ligand, imparted by variable zwitterionic and neutral resonance structure contributions, paired with the redox activity of ruthenium provided catalytic activity for Lemieux–Johnson‐type oxidative cleavage of olefins to efficiently prepare ketones and aldehydes. The ruthenium bisPYA complex significantly outperforms state‐of‐the‐art systems and displays extraordinary catalytic activity in this oxidation, reaching turnover frequencies of 650 000 h^?1 and turnover numbers of several millions.     

Selective Oxidation of Alkyl‐Substituted Polyaromatics Using Ruthenium‐Ion‐Catalyzed Oxidation

Ruthenium‐ion‐catalyzed oxidation of a range of alkylated polyaromatics has been studied. 2‐Ethylnaphthalene was used as a model substrate, and oxidation can be performed in either a conventional biphasic or in a monophasic solvent system. In either case the reaction rates and product selectivity are identical. The reaction products indicate that the aromatic ring system is oxidized in preference to the alkyl chain. This analysis is possible due to the development of a quantitative NMR protocol to determine the relative amounts of aliphatic and aromatic protons. From a systematic set of substrates we show that as the length of the alkyl chain substituent on a polyaromatic increases, the proportion of products in which the chain remains attached to the aromatic system increases. Larger polyaromatic systems, based on pyrene and phenanthrene, show greater reactivity than those with fewer aromatic rings, and the alkyl chains are more stable to oxidation.     

Catalytic Water Oxidation by Ruthenium(II) Quaterpyridine (qpy) Complexes: Evidence for Ruthenium(III) qpy‐N,N′′′‐dioxide as the Real Catalysts

Polypyridyl and related ligands have been widely used for the development of water oxidation catalysts. Supposedly these ligands are oxidation‐resistant and can stabilize high‐oxidation‐state intermediates. In this work a series of ruthenium(II) complexes [Ru(qpy)(L)₂]²⁺ (qpy=2,2′:6′,2′′:6′′,2′′′‐quaterpyridine; L=substituted pyridine) have been synthesized and found to catalyze Ce^IV‐driven water oxidation, with turnover numbers of up to 2100. However, these ruthenium complexes are found to function only as precatalysts; first, they have to be oxidized to the qpy‐N,N′′′‐dioxide (ONNO) complexes [Ru(ONNO)(L)₂]³⁺ which are the real catalysts for water oxidation.