Direct Electrooxidation of Ascorbic Acid at the Nanocrystaline Graphite‐like Pyrolytic Carbon Film Electrode

Pyrolytic carbon films (PCFs) were prepared by chemical vapor deposition (CVD) at different deposition temperatures. As an example of using PCF electrode in electroanalysis, the direct electrooxidation of ascorbic acid (AA) at the PCF electrode was investigated and compared with common carbon‐based electrodes such as glassy carbon (GC), edge plane pyrolytic graphite (EPPG), and basal plane pyrolytic graphite (BPPG) electrodes. It was found that the PCF electrodes prepared under deposition temperatures higher than 1050 °C showed a higher sensitivity and lower overpotential compared to the other carbon electrodes. The electrode was successfully applied for determination of AA in real samples.     

On reproducibility of preparation of basal plane pyrolytic graphite electrode surface

The basal plane pyrolytic graphite (BPPG) electrode is widely used as a “standard” electrode for studies of electrochemical activity of graphite, graphene and carbon nanotubes. We compared here different methods for preparation of the surface of BPPG using statistical analysis of the data. We showed that including/omitting of polishing step or including/omitting of acetone washing step in the preparation procedure exhibits statistically significant difference. However, using acetone of different purities does not lead into statistically significant results. In addition, all methods with BPPG provided RSD < 10% and did not produce any outlying results.     

Electrochemical Determination of Oxalate at Pyrolytic Graphite Electrodes

The electrocatalytic oxidation of oxalate at several carbon based electrodes including basal plane (BPPG) and edge plane (EPPG) pyrolytic graphite and glassy carbon (GC) electrode, was studied. The electrodes were examined for the sensing of oxalate ions in aqueous solutions and all three electrodes showed a response to oxalate additions. The peak of oxalate oxidation at BPPG electrode appeared at lower potential, +1.13 V vs. SCE, than at EPPG (+1.20 V vs. SCE) and GC electrode (+1.44 V vs. SCE). Oxalate oxidation at BPPG electrode was studied in more details for response characteristics (potential and current), effects of pH, temporal characteristics of response potential and current. The results indicated that oxalate oxidation proceeds as two‐electron process at the BPPG electrode with a transfer coefficient β and a diffusion coefficient D evaluated to be 0.45 and 1.03 (±0.04)×10^?5 cm² s^?1 respectively. The BPPG electrode was found to be suitable for oxalate determination in aqueous media showing linear response to oxalate concentration with a sensitivity of 0.039 AM^?1 and a limit of detection of 0.7 μM.     

Edge Plane Pyrolytic Graphite Electrodes for Halide Detection in Aqueous Solutions

The behavior of chloride, bromide and iodide at edge plane pyrolytic graphite electrodes has been explored in aqueous acid solutions. The voltammetric response in each case has been compared with that of basal plane pyrolytic graphite, glassy carbon and boron‐doped diamond. The electrochemical oxidation of chloride is found to only occur on boron‐doped diamond while the electrochemical reversibility for the oxidation of bromide on edge plane pyrolytic graphite is similar to that seen at glassy carbon whilst being superior to basal plane pyrolytic graphite and boron‐doped diamond. In the case of iodide oxidation, edge plane and basal plane pyrolytic graphite and glassy carbon display similar electrode kinetics but are all superior to boron‐doped diamond. The analytical possibilities were examined using the edge plane pyrolytic graphite electrode for both iodide and bromine where is was found that, based on cyclic voltammetry, detection limits in the order of 10^?6 M are possible.     

Application of Nanocrystalline Graphite‐like Pyrolytic Carbon Film Electrode in the Electroanalytical Determination of Famotidine

Direct electro‐oxidation of famotidine at different graphitic carbon‐based electrode materials was evaluated. These materials included conventional electrodes of edge‐plane pyrolytic graphite, basal‐plane pyrolytic graphite, carbon paste, and glassy carbon as well as nano‐structured carbon‐based materials such as pyrolytic carbon film, carbon nanotube, and nano‐graphene. Raman spectroscopy and scanning electron microscopy were employed to analyze their structural and morphological features. It was found that the pyrolytic carbon film electrode, after a simple and fast anodic activation, shows superior electroanalytical performance. The method was successfully applied for the electroanalytical determination of famotidine in tablet dosage forms and urine samples.     

The Electrocatalytic Properties of Arc‐MWCNTs and Associated ‘Carbon Onions’

For the first time we report on the electrochemical characteristics of nanometer sized polyhedral graphite onions dispersed amongst arc‐MWCNTs. These are formed during the electric arc discharge method of producing ultrapure MWCNTs (arc‐MWCNTs). The carbon onions are randomly dispersed amongst the arc‐MWCNTs which are produced with very little amorphous carbon deposits or other unwanted impurities and are formed as closed‐ended tubes. By comparison with commercially available open‐ended hollow‐tube multiwalled carbon nanotubes made using the chemical vapor deposition method (cvd‐MWCNTs), a glassy carbon electrode (GCE), an edge‐plane pyrolytic graphite electrode (eppg) and basal plane pyrolytic graphite (bppg) electrode, we can speculate that it is the edge‐plane‐like defect sites that are the electroactive sites responsible for the apparent ‘electrocatalysis’ seen with a wide range of analytes including: ferrocyanide, ruthenium hexaamine(III), nicotinamide adenosine dinucleotide (NADH), epinephrine, norepinephrine, cysteine, and glutathione. The arc‐MWCNTs themselves are produced as closed‐ended tubes with very few, if any, edge‐plane‐like defect sites evident in their HRTEM characterization. Therefore we speculate that it is the carbon onions dispersed amongst the arc‐MWCNTs which have incomplete graphite shells or a rolled‐up ‘Swiss‐roll’ structures that posses the edge‐plane‐like defect sites and are responsible for the observed voltammetric responses. Carbon onions are no more or no less ‘electrocatalytic’ than open‐ended MWCNTs which in turn are no more electrocatalytic than an eppg electrode. As the carbon onions are ubiquitous in MWCNTs formed using the arc‐discharge method the authors advise that caution should be taken before assigning any electrocatalytic behavior to the MWCNTs themselves as any observed electrocatalysis likely arises from the carbon onion impurities.     

Electroanalytical Exploitation of Nitroso Phenyl Modified Carbon‐Thiol Interactions: Application to the Low Voltage Determination of Thiols

The electrochemical generation of nitrosophenyl groups covalently attached to graphite powder (nitrosophenylcarbon) from carbon powder chemically modified with nitrophenyl groups and their subsequent reaction with thiols (glutathione, cysteine and homocysteine) has been investigated as a method by which the later can be quantified. The modified carbon powder was immobilized onto a basal plane pyrolytic graphite electrode and characterized by cyclic voltammetry by scanning between 1.0 V and ?1.0 V vs. SCE in phosphate buffer (pH 7). Square wave voltammetry (SWV) was used for the determination of thiols and the SWV parameters were optimized. The nitrosophenylcarbon is electrogenerated from nitrophenylcarbon and can chemically oxidize thiols to disulfides. Subsequent reduction of nitrosophenylcarbon to phenylhydroxylaminecarbon during the square wave voltammetric process leads to a decrease in the reductive current. This can be correlated to the concentration of thiol present within the medium. The cyclic voltammetric responses of basal plane pyrolytic graphite electrode, edge plane pyrolytic graphite electrode, glassy carbon electrode and boron‐doped diamond electrode in the direct oxidation of thiols were also investigated and all were found to have a significantly higher overpotential compared to the described method using nitrosophenylcarbon.     

Multiwalled Carbon Nanotube Modified Electrodes for the Adsorptive Stripping Voltammetric Determination and Quantification of Curcumin in Turmeric

A sensitive electrochemical method for the determination and quantification of curcumin using adsorptive stripping voltammetry (AdsSV) at a multiwalled carbon nanotube modified basal plane pyrolytic graphite electrode (MWCNT‐BPPG electrode) is presented exploiting the high surface area of the latter. Next the voltammetric behaviour of curcumin on the modified electrode is examined and AdsSV shown to be a sensitive method for quantifying curcumin. The adsorption of curcumin on the electrode surface is evidenced to follow a Langmuir adsorption isotherm. Linear calibration for curcumin in the range of 2–100 μM was obtained with a detection limit of 0.45 μM and a limit of quantification of 1.49 μM. For application to real samples of turmeric, a one‐step sample preparation in ethanol has developed providing a simple and rapid extraction procedure. The MWCNT‐BPPG electrode with AdsSV allowed the determination of curcumin equivalent in turmeric powder sample with recoveries in the range of 92–108 %. This facile and fast method will be useful for monitoring the quality of curcumin containing in commercial turmeric products.     

Edge Plane Pyrolytic Graphite Electrodes for Stripping Voltammetry: a Comparison with Other Carbon Based Electrodes

The first examples of using edge plane pyrolytic graphite electrodes for anodic and cathodic stripping voltammetry (ASV and CSV) are presented, notably the ASV of silver and the CSV of manganese. In the former example, detection limits for silver (based on 3σ) of 8.1 nM and 0.185 nM for 120 s and 300 s accumulation time, respectively, were achievable using the edge plane electrode, which were superior to those observed on glassy carbon, basal plane pyrolytic graphite and boron‐doped diamond electrodes. In the second example, a detection limit for manganese of 0.3 μM was possible which was comparable with that achievable with a boron‐doped diamond electrode but with an increased sensitivity. Comparison of the edge plane pyrolytic graphite electrode with boron‐doped diamond electrodes reveals that the edge plane electrode has comparable detection limits and sensitivities whilst exhibiting a lower signal‐to‐noise ratio and large potential window for use in trace analysis suggesting boron‐doped diamond can be conveniently replaced by edge plane pyrolytic graphite as an electrode material in many applications.     

Enhanced Performance of Edge‐Plane Pyrolytic Graphite (EPPG) Electrodes over Glassy Carbon (GC) Electrodes in the Presence of Surfactants: Application to the Stripping Voltammetry of Copper

The voltammetric performance of glassy carbon (GC) and edge‐plane pyrolytic graphite (EPPG) electrodes was investigated for the oxidation of potassium ferrocyanide in aqueous solution both with and without the addition of surfactant (sodium dodecyl sulfate and Triton X‐100). The heterogeneous electron transfer kinetics were determined for all cases, and it was found that the GC electrode surface was far more sensitive to the presence of surfactant than the more hydrophilic EPPG surface. This result was then applied to the electroanalysis of copper via adsorptive stripping voltammetry in the presence of Triton X‐100 and it was observed that the EPPG electrode response was unaffected by up to 100 μM of surfactant, whilst the voltammetry on the GC electrode was significantly affected by only 10 μM.     

Cyclic Voltammograms of Ferrocene on Multi‐Walled Carbon Nanotubes (MWCNTs)‐Modified Edge Plane Pyrolytic Graphite (EPPG) Electrode in Room Temperature Ionic Liquids (RTILs) of 1‐Ethyl‐3‐Methylimidazolium Tetrafluoroborate (EMIBF4)

In this work, the electrochemical behavior of ferrocene (Fc) was investigated by cyclic voltammetry (CV) in room temperature ionic liquids (RTILs) of 1‐ethyl‐3‐methylimidazolium tetrafluoroborate (EMIBF₄) on glass carbon (GC), edge plane pyrolytic graphite (EPPG) and multi‐walled carbon nanotube (MWCNTs)‐modified EPPG electrodes, respectively. The results demonstrated that on GC electrode, pairs of well‐defined reversible peaks were observed, while for the electrode of EPPG, the peak potential separation (ΔE_p) is obviously larger than the theoretical value of 59 mV, hinting that the electrode of EPPG is distinguished from the commonly used electrode, consistent with the previous proposition that EPPG has many “defects”. To obtain an improved electrochemical response, multi‐walled carbon nanotubes (MWCNTs) were modified on the electrode of EPPG; the increased peak current and promoted peak potential separation not only proved the existence of “defects” in MWCNTs, but also supported that “creating active points” on an electrode is the main contribution of MWCNTs. Initiating the electrochemical research of Fc on the MWCNTs‐modified EPPG electrode in RTILs and verifying the presence of “defects” on both EPPG and MWCNTs using cyclic voltammograms (CVs) of Fc obtained in RTILs of EMIBF₄, is the main contribution of this preliminary work.     

Direct Electrochemistry of Myoglobin on a Room Temperature Ionic Liquid Modified Electrode and Its Application to Nitric Oxide Biosensing

Myoglobin (Myb) was successfully immobilized on a room temperature ionic liquid (RTIL), 1‐ethyl‐3‐methyl imidazolium tetrafluoroborate ([EMIM][BF₄]) modified basal plane graphite (BPG) electrode. The electrochemical behavior of Myb on RTIL modified BPG electrode was explored and the results from cyclic voltammetry (CV) showed a well‐defined and quasi‐reversible CV peaks with a formal potential of ?0.379 V (versus Ag/AgCl) in a phosphate buffer solution (pH 7.0). RTIL shows an obvious promotion for the direct electron‐transfer between Myb and BPG electrode. Myb adsorbed on electrode surface exhibits an obvious electrocatalytic activity for the reduction of nitric oxide (NO). The catalytic current is corresponding linearly to the NO concentration in the range of 7.0×10^?7 to 7.0×10^?6 M with a limit of detection of 2.0×10^?7 M (three times the ratio of signal to noise, S/N=3).     

Electrochemical Determination of Transmembrane Protein Na+/K+‐ATPase and Its Cytoplasmic Loop C45

Electrochemistry of membrane proteins is complicated by the fact that the studied substances are poorly soluble or insoluble in aqueous environment. The solubilization of proteins using surfactants (detergents) affects the electrochemical analysis or even renders it impossible. In the present study, the electrochemistry of the transmembrane protein Na⁺/K⁺‐ATPase (NKA) and its water‐soluble isolated cytoplasmic loop C45 is described. The proteins were studied using adsorptive transfer cyclic voltammetry and square‐wave voltammetry on basal‐plane pyrolytic graphite electrode (PGE) as well as constant‐current chronopotentiometric stripping analysis on hanging mercury drop electrode (HMDE). The nonionic surfactant octaethylene glycol monododecyl ether (C₁₂E₈) was used for NKA solubilization. Under these conditions the oxidation currents of Tyr and Trp (peak Y: +0.55 V and peak W: +0.7 V, vs. Ag/AgCl/3 M KCl) and catalytic reduction currents (peak H: ?1.8 V) of NKA and C45 loop can be observed. Using the experimental procedures suggested in this study, we were able to investigate the oxidation, reduction and adsorption of NKA and C45 at femtomole level without the necessity of labeling by electroactive markers or techniques based on protein immobilization within the lipid bilayer attached to the electrode surface.     

Adsorptive Stripping Voltammetric Determination of 4‐Hexylresorcinol in Pharmaceutical Products Using Multiwalled Carbon Nanotube Based Electrodes

A sensitive electroanalytical method is presented for the determination of 4‐hexylresorcinol using adsorptive stripping voltammetry (AdsSV) at a multiwalled carbon nanotube modified basal plane pyrolytic graphite electrode (MWCNT‐BPPGE). This method is also extended to the use of a MWCNT modified screen‐printed electrode (MWCNT‐SPE), thereby demonstrating that this approach can easily be incorporated into a facile and inexpensive electrochemical sensor.     

Voltammetric Characterization of 2‐Methoxy‐4‐Nitrophenyl Derivatized Carbon Powder

Carbon powder has been functionalized with 2‐methoxy‐4‐nitrophenyl groups by the reduction of 2‐methoxy‐4‐nitrobenzenediazonium‐1,5‐naphthalenedisulfonate salt in presence of hypophosporous acid as a reducing agent. This provides an easy and inexpensive methodology to modify the carbon particle surface. This derivatization is carried out in the presence of 2‐methoxy‐4‐nitrobenzenediazonium 1,5‐naphthalenedisulfonate salt along with the carbon powder and hypophosporous acid. The electrochemical behavior of the resulting 2‐methoxy‐4‐nitrophenyl functionalized carbon powder was characterized by immobilizing it onto basal plane pyrolytic graphite (bppg) electrode and studying its voltammetric behavior. The surface morphology of derivatized carbon powder has been examined by SEM studies which revealed that the size of the functionalized carbon particles are larger than bare carbon particles The effect of pH on peak potentials, scan rate and stability of the functionalized carbon particles has revealed that they are surface bound species.     

Direct Electrochemistry of Cytochrome c Based on Poly(diallyldimethylammonium Chloride)‐ Graphene Nanosheets/Gold Nanoparticles Hybrid Nanocomposites and Its Biosensing

A novel biosensor was developed by entrapping cytochrome c (Cyt c) in thin films of the room temperature ionic liquid (RTIL) containing nanocomposites of poly(diallyldimethylammonium chloride)‐graphene nanosheets‐gold nanoparticles (PDDA‐Gp‐AuNPs) at a 11‐mercaptoundecanoic acid‐6‐mercapto‐1‐hexanol modified gold electrode. The synthesized PDDA‐Gp‐AuNPs hybrid nanocomposites were characterized by UV‐vis spectroscopy, Raman spectroscopy, scanning electron microscopy and atomic force microscopy. The PDDA‐Gp‐AuNPs nanocomposites could increase the effective surface of the electrode, enhance the fixed amount of Cyt c on the electrode surface, promote the electron transfer and facilitate the catalytic activity of Cyt c. The RTIL could provide a biocompatible microenvironment to keep Cyt c biological activities, act as an effective mediator to immobilize a large number of Cyt c on the electrode and have good conductivity to improve electron transfer. Therefore, the resultant electrode exhibited good electrochemical performance and electrocatalytic activity. It could be used for electrochemical detection of H₂O₂ with rapid response, high sensitivity, wide linear range and low detection limit, as well as good stability, repeatability and selectivity. The sensor might be promising for practical application.     

Electrochemical Sensor Based on Oxidation of 2,8‐Dihydroxyadenine to Monitor DNA Damage in Calf Thymus DNA

A novel and reliable direct electrochemical method has been established to monitor DNA damage in acid hydrolyzed calf thymus DNA, based on the determination of 2,8‐dihydroxyadenine (2,8‐DHA). A single‐wall carbon nanotubes (SWCNT) modified edge plane pyrolytic graphite electrode (EPPGE) has been used as a sensor to monitor the DNA damage. 2,8‐DHA the main in vivo adenine oxidation product undergoes oxidation at ～395 mV at SWCNT modified EPPGE using square wave voltammetry (SWV). The sensor exhibits potent and persistent electron‐mediating behavior. A well‐defined oxidation peak for the oxidation of 2,8‐DHA was observed at modified electrode with lowering of peak potential and increase in peak current as compared to bare EPPGE. At optimal experimental conditions, the catalytic oxidative peak current was responsive with the 2,8‐DHA concentrations ranging from 0.05 nM to 100 nM. The detection limit was 3.8×10^?11 M and limit of quantification was 1.27×10^?10 M. The modified electrode exhibited high stability and reproducibility.     

Direct Oxidation of Ascorbic Acid at an Edge Plane Pyrolytic Graphite Electrode: A Comparison of the Electroanalytical Response with Other Carbon Electrodes

The direct electrochemical oxidation of ascorbic acid at an edge plane pyrolytic graphite electrode (EPPG) is investigated and compared with other common carbon‐based electrodes, specifically glassy carbon, boron doped diamond and basal plane pyrolytic graphite. It is found that the EPPG electrode shows a significantly higher degree of electrochemical reversibility than the other electrode substrates giving rise to an analytically optimized limit of detection and sensitivity of 7.1×10^?5 M and 0.065 A M^?1 respectively.     

Oxidation of Sanguinarine and Its Dihydro‐Derivative at a Pyrolytic Graphite Electrode Using Ex Situ Voltammetry. Study of the Interactions of the Alkaloids with DNA

This study describes the oxidation of sanguinarine (SG) and its metabolite dihydrosanguinarine (DHSG) on the surface of a basal‐plane pyrolytic graphite electrode (PGE). Since both alkaloids strongly adsorb onto the surface of pyrolytic graphite, measurements were performed using ex situ voltammetric methods, adsorptive transfer (AdT) cyclic voltammetry (CV) and square‐wave voltammetry (SWV). Oxidation peaks of SG (peak A) and DHSG (peak A*) were observed around the potential of +0.7 V (vs. Ag/AgCl/3 M KCl), depending on the experimental conditions. The voltammetric peaks A and A* are probably related to the oxidation of N‐methylphenanthridine nitrogenous heterocycle of SG and oxidation of DHSG back to SG, respectively. The electrochemical results and optimized AdT SWV were subsequently applied to the study of the interactions of SG and DHSG with DNA in vitro. Analysis of the alkaloid/DNA interactions was based on observing heights of oxidation peaks A and A* after incubation of SG and/or DHSG with supercoiled (sc) DNA [pBSK_(?)]. Electrochemical study of the interactions was supported and complemented with measurements using gel electrophoresis (Topoisomerase I scDNA relaxation assay) and steady‐state and time‐resolved fluorescence spectroscopy. The results suggest that SG intercalates into the double‐stranded structure of scDNA (the SG/base pair ratio is max. 1/4) while increased binding affinity was observed for quaternary cation (SG⁺). DHSG which, unlike SG⁺, does not possess a strictly planar molecular structure, did not show intercalative DNA binding in any of the three methods applied.     

Graphite Micropowder Modified with 4‐Amino‐2,6‐diphenylphenol Supported on Basal Plane Pyrolytic Graphite Electrodes: Micro Sensing Platforms for the Indirect Electrochemical Detection of Δ9‐Tetrahydrocannabinol in Saliva

Graphite micropowder has been modified with 4‐amino‐2,6‐diphenylphenol immobilized onto a basal plane pyrolytic graphite electrode and explored for the indirect electrochemical sensing of Δ⁹‐tetrahydrocannabinol in artificial saliva. The protocol is based on the electrochemical formation of quinoneimine which specifically reacts with Δ⁹‐tetrahydrocannabinol resulting in the loss of the quinoneimine which can be monitored via voltammetry. It is demonstrated that Δ⁹‐tetrahydrocannabinol can be detected in artificial saliva over the micromolar range. Such a protocol may find application in screening for drug abuse.