Flow Injection Analysis of Aluminum Chlorohydrate in Antiperspirant Deodorants Using a Built‐in Three‐in‐one Screen‐Printed Silver Electrode

A screen‐printed silver strip with a built‐in three‐in‐one electrode (SPAgE) configuration of Ag‐working, Ag‐counter and Ag/Ag_xO (silver oxides) pseudoreference electrodes has been developed for sensitive and selective electrochemical flow injection analysis (FIA) of aluminum chlorohydrate (ACH) present in antiperspirants, through the free Cl^? ion liberated from ACH in aqueous medium, as a redox signal at Ag‐working electrode in pH 6 phosphate buffer solution (PBS). The solution phase and instrumental parameters were systematically optimized. The calibration graph was linear in the window 1–200 ppm concentration of ACH and the lowest detection limit (S/N=3) was 295 ppb with a slope of 0.0989 μA/ppm and regression coefficient of 0.998. Calculated relative standard deviation (RSD) values for the detection of 5 and 50 ppm ACH by this method are 2.21 % and 2.16 %, respectively. Four different antiperspirant deodorants real samples with and without ACH content were successfully analyzed and the detected values obtained were found to be in good agreement with the product labeled values.     

Colorimetric Recognition of Aldehydes and Ketones

A colorimetric sensor array has been designed for the identification of and discrimination among aldehydes and ketones in vapor phase. Due to rapid chemical reactions between the solid‐state sensor elements and gaseous analytes, distinct color difference patterns were produced and digitally imaged for chemometric analysis. The sensor array was developed from classical spot tests using aniline and phenylhydrazine dyes that enable molecular recognition of a wide variety of aliphatic or aromatic aldehydes and ketones, as demonstrated by hierarchical cluster, principal component, and support vector machine analyses. The aldehyde/ketone‐specific sensors were further employed for differentiation among and identification of ten liquor samples (whiskies, brandy, vodka) and ethanol controls, showing its potential applications in the beverage industry.     

Exploring multiple‐cumulative trapping solid‐phase microextraction for olive oil aroma profiling

Headspace solid‐phase microextraction is a solvent‐free sample preparation technique that is based on the equilibrium among a three‐phase system, i.e., sample‐headspace‐fiber. A compromise between sensitivity and extraction time is usually needed to optimize the sample throughput, especially when a large number of samples are analyzed, as usually the case in cross‐samples studies. This work explores the capability of multiple‐cumulative trapping solid‐phase microextraction on the characterization of the aroma profiling of olive oils, exploiting the automation capability of a novel headspace autosampler. It was shown that multiple‐cumulative solid‐phase microextraction has the potential to improve the overall sensitivity and burst the level of information for cross‐sample studies by using cumulative shorter extraction times.     

Isotope dilution gas chromatography with mass spectrometry for the analysis of 4‐octyl phenol, 4‐nonylphenol,and bisphenol A in vegetable oils

By the combination of solid‐phase extraction as well as isotope dilution gas chromatography with mass spectrometry, a sensitive and reliable method for the determination of endocrine‐disrupting chemicals including bisphenol A, 4‐octylphenol, and 4‐nonylphenol in vegetable oils was established. The application of a silica/N‐(n‐propyl)ethylenediamine mixed solid‐phase extraction cartridge achieved relatively low matrix effects for bisphenol A, 4‐octylphenol, and 4‐nonylphenol in vegetable oils. Experiments were designed to evaluate the effects of derivatization, and the extraction parameters were optimized. The estimated limits of detection and quantification for bisphenol A, 4‐octylphenol, and 4‐nonylphenol were 0.83 and 2.5 μg/kg, respectively. In a spiked experiment in vegetable oils, the recovery of the added bisphenol A was 97.5–110.3%, recovery of the added 4‐octylphenol was 64.4–87.4%, and that of 4‐nonylphenol was 68.2–89.3%. This sensitive method was then applied to real vegetable oil samples from Zhejiang Province of China, and none of the target compounds were detected.     

Development of an Electrochemical Immunoassay Based on the Use of an Eight‐Electrodes Screen‐Printed Array Coupled with Magnetic Beads for the Detection of Antimicrobial Sulfonamides in Honey

In this work an electrochemical immunoassay, based on a direct competitive assay, was developed using magnetic beads as solid phase and carbon screen‐printed arrays as transducers for the detection of sulfonamides in food matrices such as honey. Magnetic beads coated with protein A were modified by immobilisation of specific antibodies and then the competition between the target analyte and the corresponding analyte‐labelled with an enzyme was carried out; after the immunosensing step, beads were captured by a magnet onto the working surfaces of a screen‐printed eight‐electrodes array for a multiple electrochemical detection. Screen‐printed eight‐electrodes arrays were chosen as transducers due to the possibility to repeat multiple analysis and to test different samples simultaneously. Alkaline Phosphatase (AP) was used as enzyme label and Differential Pulse Voltammetry (DPV) as fast electrochemical technique. Calibration curves demonstrate that the developed electrochemical immunoassay was able to detect this class of drugs in standard solutions at low concentrations (ng/mL levels). The short incubation times (25 min) and the fast electrochemical measurement (10 sec) make of these systems a possible alternative to classic ELISA tests.     

Chemical composition and antimicrobial activity of cumin oil (Cuminum cyminum, Apiaceae)

Cumin oil samples (Cuminum cyminum L.) from four different geographical origins were analyzed using GC-MS and GC-FID for their qualitative and quantitative composition. The major compounds in all cumin oils were the monoterpenes beta-pinene, p-cymene and gamma-terpinene and the terpenoid aldehydes cuminic aldehyde and the isomeric menthadien carboxaldehydes. All essential oils, and cuminic aldehyde, were tested, using agar diffusion and serial dilution methods, against different Gram-positive and Gram-negative bacteria isolated from different sources of food (pork fillet, minced meat and sausages) and clinical isolates, as well as three different Candida albicans isolates. All cumin oils and cuminic aldehyde exhibited a considerable inhibitory effect against all the organisms tested, except Pseudomonas spp.     

Microwave‐assisted extraction and high‐throughput monolithic‐polymer‐based micro‐solid‐phase extraction of organophosphorus,triazole, and organochlorine residues in apple

A high‐throughput micro‐solid‐phase extraction device based on a 96‐well plate was constructed and applied to the determination of pesticide residues in various apple samples. Butyl methacrylate and ethylene glycol dimethacrylate were copolymerized as a monolithic polymer and placed in the cylindrically shaped stainless‐steel meshes of 96‐micro‐solid‐phase extraction device and used as an extracting unit. Before the micro‐solid‐phase extraction, microwave‐assisted extraction was employed to facilitate the transfer of the pesticide residues from the apple matrix to liquid media. Then, 1 mL of the aquatic samples was transferred into the 96‐well plate and the 96‐micro‐solid‐phase extraction device was applied for the extraction of the selected pesticides. Influential parameters, such as sorbent‐to‐sorbent reproducibility, microwave‐assisted extraction time, ionic strength and micro‐solid‐phase extraction time, were optimized. The limits of quantitation were below 120 μg/kg, which are lower than the maximum residue limits. The developed method was successfully implemented for the extraction and determination of the selected pesticides from 20 different apple samples gathered from local markets. Phosalone was identified and quantified at the concentration level of 147 (±16.4) μg/kg in one of the samples.     

Solid‐phase microextraction based method for determination of essential oils components in herbal beverages

A method employing the direct immersion solid‐phase microextraction followed by GC‐MS analysis is presented for the determination of essential oils components in herbal tea infusions, i.e. their direct content in the liquid phase. The extraction performances were compared using five different microextraction fibres. Significant parameters affecting sorption process such as sample amount, sorption and desorption time and temperature, stirring speed, pH adjustment and effect of ionic strength were optimised and discussed. By optimising the key parameters, a detection limits (LOD = S/N × 3) for ten target marker compounds were obtained in the range from 5.3 to 48.2 ng/mL with recoveries ranged between 93.03 and 100.50%. Intra‐day and inter‐day repeatability at three concentration levels were found to be 1.1–15.3 and 7.2–15.5% RSD, respectively. Finally, the optimised procedure enabling a rapid and simple analysis of essential oils was applied for the direct determination of these compounds in ten herbal tea infusions.     

Simultaneous determination of long-chain aliphatic aldehydes and waxes in olive oils

A procedure for the simultaneous determination of long-chain aliphatic aldehydes, and aliphatic and triterpenic waxes in virgin olive oils is described. A fraction containing these compounds was isolated from the oil using solid-phase extraction on silica-gel cartridges. The fraction was analyzed by capillary GC on 35%-dimethyl-65%-diphenylpolysiloxane phase using on-column injection. In extra virgin olive oils, the long-chain aliphatic aldehydes with even carbon atom numbers from C22 to C30 were identified by comparison of retention times and mass spectra with those of synthesized standards. The concentration of total aldehydes ranged from 20.2 to 108.0 mg/kg-n-hexacosanal being the most abundant aldehyde. The determination of aliphatic waxes was achieved with similar or better precision than that of the EU official methods.     

Electro‐assisted solid‐phase microextraction based on poly(3,4‐ethylenedioxythiophen) combined with GC for the quantification of tricyclic antidepressants

In this study, a platinum wire coated with poly(3,4‐ethylenedioxythiophen) was used as an electro‐assisted solid‐phase microextraction fiber for the quantification of tricyclic antidepressant drugs in biological samples by coupling to GC employing a flame ionization detector. In this study, an electric field increased the extraction rate and recovery. The fiber used as a solid phase was synthesized by the electropolymerization of 3,4‐ethylenedioxythiophen monomers onto a platinum wire. The ability of this fiber to extract imipramine, desipramine, and clomipramine by using the electro‐assisted solid‐phase microextraction technique was evaluated. The effect of various parameters that influence the extraction efficiency, which include solution temperature, extraction time, stirring rate, ionic strength, time and temperature of desorption, and thickness of the fiber, was optimized. Under optimized conditions, the linear ranges and regression coefficients of calibration curves were in the range of 0.5–250 and 0.990–0.998 ng/mL, respectively. Detection limits were in the range of 0.15–0.45 ng/mL. Finally, this method was applied to the determination of drugs in urine and wastewater samples and recoveries were 4.8–108.9%.     

Development of solid‐phase microextraction coupled with liquid chromatography for analysis of tramadol in brain tissue using its molecularly imprinted polymer

In this work, performance of a molecularly imprinted polymer (MIP) as a selective solid‐phase microextraction sorbent for the extraction and enrichment of tramadol in aqueous solution and rabbit brain tissue, is described. Binding properties of MIPs were studied in comparison with their nonimprinted polymer (NIP). Ten milligrams of the optimized MIP was then evaluated as a sorbent, for preconcentration, in molecularly imprinted solid‐phase microextraction (MISPME) of tramadol from aqueous solution and rabbit brain tissue. The analytical method was calibrated in the range of 0.004 ppm (4 ng mL⁻¹) and 10 ppm (10 μg mL⁻¹) in aqueous media and in the ranges of 0.01 and 10 ppm in rabbit brain tissue, respectively. The results indicated significantly higher binding affinity of MIPs to tramadol, in comparison with NIP. The MISPME procedure was developed and optimized with a recovery of 81.12–107.54% in aqueous solution and 76.16–91.20% in rabbit brain tissue. The inter‐ and intra‐day variation values were <8.24 and 5.06%, respectively. Finally the calibrated method was applied for determination of tramadol in real rabbit brain tissue samples after administration of a lethal dose. Our data demonstrated the potential of MISPME for rapid, sensitive and cost‐effective sample analysis.     

Solid‐State Structure of Protonated Ketones and Aldehydes

Protonated carbonyl compounds have been invoked as intermediates in many acid‐catalyzed organic reactions. To gain key structural and electronic data about such intermediates, oxonium salts derived from five representative examples of ketones and aldehydes are synthesized in the solid state, and characterized by X‐ray crystallography and Raman spectroscopy for the first time. DFT calculations were carried out on the cations in the gas phase. Whereas an equimolar reaction of the carbonyl compounds, acetone, cyclopentanone, adamantanone, and acetaldehyde, with SbF₅ in anhydrous HF yielded mononuclear oxonium cations, the same stoichiometry in a reaction with benzaldehyde resulted in formation of a hemiprotonated, hydrogen‐bridged dimeric cation. Hemiprotonated acetaldehyde was obtained when a 2:1 ratio of aldehyde and SbF₅ was used. Experimental and NBO analyses quantify the significant increase in electrophilicity of the oxonium cations compared to that of the parent ketones/aldehydes.     

Determination of vitamin A in blood serum based on solid‐phase extraction using cetyltrimethyl ammonium bromide‐modified attapulgite

Cetyltrimethyl ammonium bromide‐modified attapulgite was prepared and utilized as a novel sorbent in a simple solid‐phase extraction method for the determination of vitamin A in blood serum. Several factors affecting extraction efficiency were systematically optimized, including the sampling solvent and its volume, as well as the elution solvent and its volume. Under the optimal solid‐phase extraction conditions, the adsorption capacity of vitamin A was as high as 28 mg/g according to the Langmuir isotherm model. Based on the developed solid‐phase extraction method, the level of vitamin A in 200 µL blood serum sample could be accurately determined by high‐performance liquid chromatography. The recoveries of vitamin A spiked in 10% v/v methanol aqueous solutions were in the range of 86.9–92.8%, with the relative standard deviations not more than 8.1%. The method was applied to the determination of vitamin A in serum samples from 20 pregnant women. Compared with the previously reported solid‐phase extraction methods for determination of vitamin A in serum, our developed cetyltrimethyl ammonium bromide‐modified attapulgite‐based solid‐phase extraction method used lower serum volume, omitted extra steps (i.e. evaporation and re‐dissolution), and eliminated internal standard. The results were promising for it to be used in routine monitoring during pregnancy.     

Transformation of Oximes and Alcohols to Carbonyl Compounds Using Amberlite IRA-400 Supported Chromic Acid in the Presence of Zirconium Tetrachloride

A wide variety of oximes and alcohols were efficiently converted to their corresponding aldehydes and ketones in good to excellent yields using amberlite IRA-400 supported chromic acid in the presence of zirconium tetrachloride in refluxing acetonitrile-H2O. Selective oxidation of oximes and alcohols in the presence of other functional groups such as acetal, hydrazone, aldehyde, ether and alkene can be considered as a noteworthy advantage of this method. A wide variety of oximes and alcohols were efficiently converted to their corresponding aldehydes and ketones in good to excellent yields using amberlite IRA-400 supported chromic acid in the presence of zirconium tetrachloride in refluxing acetonitrile-H2O. Selective oxidation of oximes and alcohols in the presence of other functional groups such as acetal, hydrazone, aldehyde, ether and alkene can be considered as a noteworthy advantage of this method.     

Solid‐Phase Synthesis of a Combinatorial Methylated (±)‐Epigallocatechin Gallate Library and the Growth‐Inhibitory Effects of these Compounds on Melanoma B16 Cells

We report on the solid‐phase synthesis of a combinatorial methylated (±)‐epigallocatechin gallate (EGCG) library and its biological evaluation. Epigallocatechin gallate (EGCG) and its methylated derivatives, which are members of the catechin family, exhibit various anti‐cancer effects. The solid‐phase synthesis of methylated EGCG involves the preparation of the α‐acyloxyketone by the coupling of a solid‐supported aldehyde with a ketone and an acid. The subsequent release and reductive etherification reaction of the solid‐supported α‐acyloxyketone provide the protected EGCG in good total yields. Sixty‐four methylated EGCGs were successfully prepared. The growth‐inhibitory effects of the methylated EGCG library were also examined. Although methylation of EGCG generally causes reduced growth inhibition, the growth‐inhibitory effect of 7‐OMe EGCGs was comparable to that of EGCG. The 7‐OMe EGCGs are attractive drug candidates because of their enhanced bioavailability.     

Thorough investigation of the oxygen heterocyclic fraction of lime (Citrus aurantifolia (Christm.) Swingle) juice

Reversed‐phase‐HPLC analysis by means of superficially porous silica particle columns (fused‐core) was applied to the investigation of flavonoids, coumarins, and psoralens in lime juice samples. Hesperidin (367.0 ± 16.0 ppm) and eriocitrin (148.0 ± 7.9 ppm) were the most abundant flavonoids. Fifteen coumarins and furocoumarins were determined, including bergamottin (29.6 ± 1.1 ppm), 5‐geranyloxy‐7‐methoxycoumarin (16.5 ± 0.6 ppm), and oxypeucedanin hydrate (9.9 ± 0.5 ppm) as predominant compounds. These molecules are today well known for their beneficial effects on human health. As a consequence, the present study, beyond investigating for the first time the chemical composition of lime juice, highlights also its health‐promoting qualities, due to its content of flavonoids and coumarins.     

A platinized stainless steel fiber with in‐situ coated polyaniline/polypyrrole/graphene oxide nanocomposite sorbent for headspace solid‐phase microextraction of aliphatic aldehydes in rice samples

The surface of a stainless steel fiber was made larger, porous and cohesive by platinizing for tight attachment of its coating. Then it was coated by a polyaniline/polypyrrole/graphene oxide (PANI/PP/GO) nanocomposite film using electrochemical polymerization. The prepared PANI/PP/GO fiber was used for headspace solid‐phase microextraction (HS‐SPME) of linear aliphatic aldehydes in rice samples followed by GC‐FID determination. To achieve the highest extraction efficiency, various experimental parameters including extraction time and temperature, matrix modifier and desorption condition were studied. The linear calibration curves were obtained over the range of 0.05–20 μg g⁻¹ (R ² > 0.99) for C₄–C₁₁ aldehydes. The limits of detection were found to be in the range of 0.01–0.04 μg g⁻¹. RSD values were calculated to be <7.4 and 10.7% for intra‐ and inter‐day, respectively. The superiority of the prepared nanocomposite SPME fiber was established by comparison of its results with those obtained by polydimethylsiloxane, carbowax–divinylbenzene, divinylbenzene–carboxen–polydimethylsiloxane and polyacrylate commercial ones. Finally, the nanocomposite fiber was used to extract and determine linear aliphatic aldehydes in 18 rice samples.     

New Phosphonate Reagents for Aldehyde Homologation

New phosphonate reagents were developed for the two‐carbon homologation of aldehydes to unbranched or methyl‐branched unsaturated aldehydes. The phosphonate reagents, diethyl methylformylphosphonate dimethylhydrazone and diethyl ethylformyl‐2‐phosphonate dimethylhydrazone, contained a protected aldehyde group instead of the usual ester group. A homologation cycle entailed condensation of the reagent with the starting aldehyde, followed by removal of the dimethylhydrazone protective group with a biphasic mixture of 1 M HCl and petroleum ether. This robust two‐step process worked with aliphatic, α,β‐unsaturated and aromatic aldehydes. Isolated yields for the condensation step ranged from 77% to 89%, and yields for the deprotection step ranged from 81% to 96%.     

Automated headspace solid‐phase microextraction and on‐fiber derivatization for the determination of clenbuterol in meat products by gas chromatography coupled to mass spectrometry

A method was developed for the determination of clenbuterol in meat using stable‐isotope‐dilution gas chromatography with mass spectrometry coupled with solid‐phase microextraction and on‐fiber derivatization. The samples were first homogenized with hydrochloric acid followed by protein deposition. After headspace solid‐phase microextraction and on‐fiber derivatization, the content of clenbuterol was measured with the aid of stable‐isotope dilution. The condition of solid‐phase microextraction was optimized by central composite design. The relative standard deviations, limit of detection, and recoveries for clenbuterol were 4.2–9.2%, 0.48 μg/kg, and 96–104%, respectively. The proposed method was satisfactory for analysis of real samples as compared with the Chinese standard method.     

Evaluation of solid‐phase extraction procedures for the quantitation of venlafaxine in human saliva by high‐performance liquid chromatography

In recent years, the use of human saliva for diagnostic purposes has evoked great interest. Thus, the aim of this study was to choose the optimal solid‐phase extraction cartridges and extraction solvents for the quantitation of venlafaxine in saliva. Blank saliva samples spiked with venlafaxine concentrations between 25 and 750 ng/mL were analyzed using five solid‐phase extraction columns (C18, C8, Strata‐X, Strata‐X‐C, and Strata‐X‐AW), washing solvents (deionized water, phosphate buffer at pH 5.5, and their mixtures with methanol), and elution solvents (methanol, acetonitrile, and their mixtures with 25% ammonia). A high‐performance liquid chromatography system was used to quantify venlafaxine in saliva. The results of this study revealed that nine of 25 procedures enabled quantitation of venlafaxine in the tested concentration range. The procedure that used a C18 cartridge, a mixture of methanol and deionized water as the washing solvent, and methanol as the elution solvent was the most effective and allowed quantitation of all venlafaxine concentrations with an acceptable recovery. In contrast, the Strata‐X‐C cartridge could not detect venlafaxine at the lowest concentration (25 ng/mL). The data acquired from the high‐performance liquid chromatography system were confirmed by a multivariate data analysis.