Electronic Structure Calculations for Hole‐Transporting Triphenylamine Derivatives in Polymer Light‐Emitting Diodes

Hole‐transporting polymers based on polyethene‐triphenylamine derivatives are investigated with respect to their UV/Vis spectra. Two substituents, N‐phenyl‐1‐naphthylamine and carbazole, are examined as their respective polymer light‐emitting diodes (PLEDs) show very different luminous efficiencies. In order to identify the origin of these phenomena electronic structure calculations based on TD‐DFT were performed using monomer models of the hole‐transporting polymers. In experiment these hole‐transporting polymers show very specific differences in their absorption and emission (fluorescence and phosphorescence) spectra. The analysis of the simulated absorption and emission spectra, the MOs as well as the ground and excited state geometries give explanations for the different optical performances of the corresponding PLEDs.

     

Enhancement of Photostability in Blue‐Light‐Emitting Polymers Doped with Gold Nanoparticles

A dramatic increase in the photostability of a blue‐light‐emitting polymer, poly(9,9‐dioctylfluorene), was achieved by the addition of 5–10 nm gold nanoparticles. The optical absorption band of the gold nanoparticles was tuned to resonate the triplet exciton ground state bandgap energy of the polymer. Photo‐oxidation rate of poly(9,9‐dioctylfluorene) was effectively reduced by doping the polymer with very small amounts (≈10⁻⁶–10⁻⁵ volume fraction) of the gold nanoparticles.

Retarded photo‐oxidation in PDOF nanocomposite films with various doped gold nanoparticles.     

An Ionic Molecular Glass as Electron Injection Layer for Efficient Polymer Light‐Emitting Diode

An ionic molecular glass based on a dendronized monoammonium salt has been facilely synthesized and utilized as an interfacial electron‐injection layer in a light‐emitting diode (LED). The characterization of a yellow‐green LED that involves an Al cathode and a thin layer of the new compound spin cast from a methanol solution has shown device performances comparable to those obtained with a Ba/Al cathode. Photovoltaic measurements under white light irradiation reveal that a thin layer of the new compound can significantly increase the built‐in potential and thus facilitate electron injection from an Al cathode. Furthermore, it is interesting to observe that the new ionic salt could undergo reorganization on the emissive conjugated polymer layer, which leads to the formation of nearly uniform nanoaggregates.

     

Electrophosphorescent Heterobimetallic Oligometallaynes and Their Applications in Solution‐Processed Organic Light‐Emitting Devices

By combining the iridium(III) ppy‐type complex (Hppy=2‐phenylpyridine) with a square‐planar platinum(II) unit, some novel phosphorescent oligometallaynes bearing dual metal centers (viz. Ir^III and Pt^II) were developed by combining trans‐[Pt(PBu₃)₂Cl₂] with metalloligands of iridium possessing bifunctional pendant acetylene groups. Photophysical and computational studies indicated that the phosphorescent excited states arising from these oligometallaynes can be ascribed to the triplet emissive Ir^III ppy‐type chromophore, owing to the obvious trait (such as the longer phosphorescent lifetime at 77 K) also conferred by the Pt^II center. So, the two different metal centers show a synergistic effect in governing the photophysical behavior of these heterometallic oligometallaynes. The inherent nature of these amorphous materials renders the fabrication of simple solution‐processed doped phosphorescent organic light‐emitting diodes (PHOLEDs) feasible by effectively blocking the close‐packing of the host molecules. Saliently, such a synergistic effect is also important in affording decent device performance for the solution‐processed PHOLEDs. A maximum brightness of 3 356 cd m^?2 (or 2 708 cd m^?2), external quantum efficiency of 0.50 % (or 0.67 %), luminance efficiency of 1.59 cd A^?1 (or 1.55 cd A^?1), and power efficiency of 0.60 Lm W^?1 (or 0.55 Lm W^?1) for the yellow (or orange) phosphorescent PHOLEDs can be obtained. These results show the great potential of these bimetallic emitters for organic light‐emitting diodes.     

Hydrogen‐Bonded Supramolecular Conjugated Polymer Nanoparticles for White Light‐Emitting Devices

Supramolecular polyfluorenol enable assembly into conjugated polymer nanoparticles (CPNs). Poly{9‐[4‐(octyloxy)phenyl]fluoren‐9‐ol‐2,7‐diyl} (PPFOH)‐based supramolecular nanoparticles are prepared via reprecipitation. PPFOH nanoparticles with diameters ranging from 40 to 200 nm are obtained by adding different amounts of water into DMF solution. Size‐dependent luminescence is observed in PPFOH‐based hydrogen‐bonded nanoparticles that is different from that of poly(9,9‐dioctylfluorenes). Finally, white light‐emitting devices using CPNs with a size of 80 nm exhibit white emission with the CIE coordinates (0.31, 0.34). Amphiphilic conjugated polymer nanoparticles are potential organic nano‐inks for the fabrication of organic devices in printed electronics.

     

Blue‐Light‐Emitting Conjugated Polymers Derived From 2,7‐Carbazoles

Blue‐light‐emitting 2,7‐carbazole‐based conjugated copolymers have been prepared by Yamamoto or Suzuki cross‐coupling reactions. By introducing highly substituted aromatic comonomers, fully soluble high‐molecular‐weight copolymers have been obtained. Moreover, these amorphous polymeric materials exhibit good thermal stability and interesting redox properties. All these features make these new conjugated polymers highly promising for the development of single‐polymer‐layer blue‐light‐emitting diodes.

     

Novel Hole‐Transport Material for Efficient Polymer Light‐Emitting Diodes by Photoreaction

Summary: The photo‐crosslinking of carbazole dendrimers was analyzed by UV and IR spectroscopic methods. Photoirradiation results in the formation of a film that is insoluble in toluene and benzene. Time‐of‐flight mass spectrometry studies revealed that the photoirradiation lead to an oligomerization of the dendrimer through crosslinking. The resulting insoluble dendrimer film could be applied as a hole‐transport layer in efficient polymer electroluminescence devices (PLEDs).

Luminance‐voltage characteristics for PLEDs wherein PEDOT:PSS and CbzG3 complex with SnCl₂ were employed as the hole transport layer (ITO/HTL/EML/Ca/Ag).     

Strong Single‐Band Blue Emission from Colloidal Ce3+/Tm3+‐Doped NaYF4 Nanocrystals for Light‐Emitting Applications

An intense single‐band blue emission at λ=450 nm is observed from Tm³⁺ ions through Ce³⁺ sensitization, for the first time, in colloidal Ce³⁺/Tm³⁺‐doped NaYF₄ nanocrystals. The intense Tm³⁺ emission through broad‐band excitation is advantageous for developing luminescent nanocomposites because they can be easily incorporated into polymers. The composites can easily be coated over UV light‐emitting diodes (LEDs) to develop phosphor‐based blue LEDs.     

White Polymer Light‐Emitting Diodes Based on Star‐Shaped Polymers with an Orange Dendritic Phosphorescent Core

A series of new star‐shaped polymers with a triphenylamine‐based iridium(III) dendritic complex as the orange‐emitting core and poly(9,9‐dihexylfluorene) (PFH) chains as the blue‐emitting arms is developed towards white polymer light‐emitting diodes (WPLEDs). By fine‐tuning the content of the orange phosphor, partial energy transfer and charge trapping from the blue backbone to the orange core is realized to achieve white light emission. Single‐layer WPLEDs with the configuration of ITO (indium‐tin oxide)/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS)/polymer/CsF/Al exhibit a maximum current efficiency of 1.69 cd A⁻¹ and CIE coordinates of (0.35, 0.33), which is very close to the pure white‐light point of (0.33, 0.33). To the best of our knowledge, this is the first report on star‐shaped white‐emitting single polymers that simultaneously consist of fluorescent and phosphorescent species.

     

Organic Light‐Emitting Diodes Using a Neutral π Radical as Emitter: The Emission from a Doublet

Triplet harvesting is a main challenge in organic light‐emitting devices (OLEDs), because the radiative decay of the triplet is spin‐forbidden. Here, we propose a new kind of OLED, in which an organic open‐shell molecule, (4‐N‐carbazolyl‐2,6‐dichlorophenyl)bis(2,4,6‐trichlorophenyl)methyl (TTM‐1Cz) radical, is used as an emitter, to circumvent the transition problem of triplet. For TTM‐1Cz, there is only one unpaired electron in the highest singly occupied molecular orbital (SOMO). When this electron is excited to the lowest singly unoccupied molecular orbital (SUMO), the SOMO is empty. Thus, transition back of the excited electron to the SOMO is totally spin‐allowed. Spectral analysis showed that electroluminescence of the OLED originated from the electron transition between SUMO and SOMO. The magneto‐electroluminescence measurements revealed that the spin configuration of the excited state of TTM‐1Cz is a doublet. Our results pave a new way to obtain 100 % internal quantum efficiency of OLEDs.     

2,5‐Difluorenyl‐Substituted Siloles for the Fabrication of High‐Performance Yellow Organic Light‐Emitting Diodes

2,3,4,5‐Tetraarylsiloles are a class of important luminogenic materials with efficient solid‐state emission and excellent electron‐transport capacity. However, those exhibiting outstanding electroluminescence properties are still rare. In this work, bulky 9,9‐dimethylfluorenyl, 9,9‐diphenylfluorenyl, and 9,9′‐spirobifluorenyl substituents were introduced into the 2,5‐positions of silole rings. The resulting 2,5‐difluorenyl‐substituted siloles are thermally stable and have low‐lying LUMO energy levels. Crystallographic analysis revealed that intramolecular π–π interactions are prone to form between 9,9′‐spirobifluorene units and phenyl rings at the 3,4‐positions of the silole ring. In the solution state, these new siloles show weak blue and green emission bands, arising from the fluorenyl groups and silole rings with a certain extension of π conjugation, respectively. With increasing substituent volume, intramolecular rotation is decreased, and thus the emissions of the present siloles gradually improved and they showed higher fluorescence quantum yields (Φ_F=2.5–5.4 %) than 2,3,4,5‐tetraphenylsiloles. They are highly emissive in solid films, with dominant green to yellow emissions and good solid‐state Φ_F values (75–88 %). Efficient organic light‐emitting diodes were fabricated by adopting them as host emitters and gave high luminance, current efficiency, and power efficiency of up to 44 100 cd m^?2, 18.3 cd A^?1, and 15.7 lm W^?1, respectively. Notably, a maximum external quantum efficiency of 5.5 % was achieved in an optimized device.     

Thermally Cross‐Linkable Hole Transport Polymers for Solution‐Based Organic Light‐Emitting Diodes

Two thermally cross‐linkable hole transport polymers that contain phenoxazine and triphenylamine moieties, X‐P1 and X‐P2, are developed for use in solution‐processed multi‐stack organic light‐emitting diodes (OLEDs). Both X‐P1 and X‐P2 exhibit satisfactory cross‐linking and optoelectronic properties. The highest occupied molecular orbital (HOMO) levels of X‐P1 and X‐P2 are −5.24 and −5.16 eV, respectively. Solution‐processed super yellow polymer devices (ITO/X‐P1 or X‐P2/PDY‐132/LiF/Al) with X‐P1 or X‐P2 hole transport layers of various thicknesses are fabricated with the aim of optimizing the device characteristics. The fabricated multi‐stack yellow devices containing the newly synthesized hole transport polymers exhibit satisfactory currents and power efficiencies. The optimized X‐P2 device exhibits a device efficiency that is dramatically improved by more than 66% over that of a reference device without an HTL.

     

Efficient Solid‐State Light‐Emitting CuCdS Nanocrystals Synthesized in Air

Semiconductor nanocrystals (NCs) possess high photoluminescence (PL) typically in the solution phase. In contrary, PL rapidly quenches in the solid state. Efficient solid state luminescence can be achieved by inducing a large Stokes shift. Here we report on a novel synthesis of compositionally controlled CuCdS NCs in air avoiding the usual complexity of using inert atmosphere. These NCs show long‐range color tunability over the entire visible range with a remarkable Stokes shift up to about 1.25 eV. Overcoating the NCs leads to a high solid‐state PL quantum yield (QY) of ca. 55 % measured by using an integrating sphere. Unique charge carrier recombination mechanisms have been recognized from the NCs, which are correlated to the internal NC structure probed by using extended X‐ray absorption fine structure (EXAFS) spectroscopy. EXAFS measurements show a Cu‐rich surface and Cd‐rich interior with 46 % Cu^I being randomly distributed within 84 % of the NC volume creating additional transition states for PL. Color‐tunable solid‐state luminescence remains stable in air enabling fabrication of light‐emitting diodes (LEDs).     

Bipolar Host Materials for Organic Light‐Emitting Diodes

It is important to balance holes and electrons in the emitting layer of organic light‐emitting diodes to maximize recombination efficiency and the accompanying external quantum efficiency. Therefore, the host materials of the emitting layer should transport both holes and electrons for the charge balance. From this perspective, bipolar hosts have been popular as the host materials of thermally activated delayed fluorescent devices and phosphorescent organic light‐emitting diodes. In this review, we have summarized recent developments of bipolar hosts and suggested perspectives of host materials for organic light‐emitting diodes.     

Novel Spectrally Stable Saturated Blue‐Light‐Emitting Poly[(fluorene)‐co‐(dioctyldibenzothiophene‐S,S‐dioxide)]s

Novel poly[(fluorene)‐co‐(2,8‐dioctyldibenzothiophene‐S,S‐dioxide‐3,7‐diyl)]s were synthesized. The octyl group on the 2,8‐dioctyldibenzothiophene‐S,S‐dioxide (DOSO) unit improved the solubility of the polymers and broadened the optical band gap from 2.95 to 3.20 eV as the content of DOSO unit increases. The electroluminescence (EL) spectra of polymers show CIE coordinates around (0.16, 0.07) independent of the ratio of DOSO units in the polymers, owing to the ICT and steric hindrance dual‐function. A high efficiency of 3.1 cd · A⁻¹ (EQE = 3.9%) was obtained with the configuration of ITO/PEDOT:PSS/polymer/Ba/Al. The results indicate that PF‐3,7DOSOs could be a promising candidate for saturated blue‐emitting polymers with spectral stability and high efficiency.

     

Triarylboron‐Based Fluorescent Organic Light‐Emitting Diodes with External Quantum Efficiencies Exceeding 20 %

Triarylboron compounds have attracted much attention, and found wide use as functional materials because of their electron‐accepting properties arising from the vacant p orbitals on the boron atoms. In this study, we design and synthesize new donor–acceptor triarylboron emitters that show thermally activated delayed fluorescence. These emitters display sky‐blue to green emission and high photoluminescence quantum yields of 87–100 % in host matrices. Organic light‐emitting diodes using these emitting molecules as dopants exhibit high external quantum efficiencies of 14.0–22.8 %, which originate from efficient up‐conversion from triplet to singlet states and subsequent efficient radiative decay from singlet to ground states.     

Intercrossed Carbon Nanorings with Pure Surface States as Low‐Cost and Environment‐Friendly Phosphors for White‐Light‐Emitting Diodes

As an important energy‐saving technique, white‐light‐emitting diodes (W‐LEDs) have been seeking for low‐cost and environment‐friendly substitutes for rare‐earth‐based expensive phosphors or Pd²⁺/Cd²⁺‐based toxic quantum dots (QDs). In this work, precursors and chemical processes were elaborately designed to synthesize intercrossed carbon nanorings (IC‐CNRs) with relatively pure hydroxy surface states for the first time, which enable them to overcome the aggregation‐induced quenching (AIQ) effect, and to emit stable yellow‐orange luminescence in both colloidal and solid states. As a direct benefit of such scarce solid luminescence from carbon nanomaterials, W‐LEDs with color coordinate at (0.28, 0.27), which is close to pure white light (0.33, 0.33), were achieved through using these low‐temperature‐synthesized and toxic ion‐free IC‐CNRs as solid phosphors on blue LED chips. This work demonstrates that the design of surface states plays a crucial role in exploring new functions of fluorescent carbon nanomaterials.