Iridium(I) Hydroxides: Powerful Synthons for Bond Activation

A family of iridium(I) hydroxides of the form [Ir(cod)(NHC)(OH)] (cod=1,5‐cyclooctadiene, NHC=N‐heterocyclic carbene) is reported. Single‐crystal X‐ray analyses and computational methods were used to explore the structural characteristics and steric properties of these new complexes. The model complex [Ir(cod)(IiPr)(OH)] (IiPr=1,3‐(diisopropyl)imidazol‐2‐ylidene) undergoes reaction with a wide variety of substrates including boronic acids and silicon compounds. In addition, O? H, N? H and C? H bond activation was achieved with alcohols, carboxylic acids, amines and various sp‐, sp²‐ and sp³‐hybridised carbon centres, giving access to a wide range of new Ir^I complexes. These studies have allowed us to explore the exciting reactivity of this motif, revealing a versatile and useful synthon capable of activating important chemical bonds under mild (typically room temperature) conditions. No additives were required and, in the case of X? H bond activation, water was the only waste product, rendering this an atom efficient procedure for bond activation. This system has great potential for the construction of new catalytic cycles for organic synthesis and small‐molecule activation.     

[(NHC)(NHCewg)RuCl2(CHPh)] Complexes with Modified NHCewg Ligands for Efficient Ring‐Closing Metathesis Leading to Tetrasubstituted Olefins

Imidazolium salts (NHC_ewg ? HCl) with electronically variable substituents in the 4,5‐position (H,H or Cl,Cl or H,NO₂ or CN,CN) and sterically variable substituents in the 1,3‐position (Me,Me or Et,Et or iPr,iPr or Me,iPr) were synthesized and converted into the respective [AgI(NHC)_ewg] complexes. The reactions of [(NHC)RuCl₂(CHPh)(py)₂] with the [AgI(NHC_ewg)] complexes provide the respective [(NHC)(NHC_ewg)RuCl₂(CHPh)] complexes in excellent yields. The catalytic activity of such complexes in ring‐closing metathesis (RCM) reactions leading to tetrasubstituted olefins was studied. To obtain quantitative substrate conversion, catalyst loadings of 0.2–0.5 mol % at 80 °C in toluene are sufficient. The complex with the best catalytic activity in such RCM reactions and the fastest initiation rate has an NHC_ewg group with 1,3‐Me,iPr and 4,5‐Cl,Cl substituents and can be synthesized in 95 % isolated yield from the ruthenium precursor. To learn which one of the two NHC ligands acts as the leaving group in olefin metathesis reactions two complexes, [(FL‐NHC)(NHC_ewg)RuCl₂(CHPh)] and [(FL‐NHC_ewg)(NHC)RuCl₂(CHPh)], with a dansyl fluorophore (FL)‐tagged electron‐rich NHC ligand (FL‐NHC) and an electron‐deficient NHC ligand (FL‐NHC_ewg) were prepared. The fluorescence of the dansyl fluorophore is quenched as long as it is in close vicinity to ruthenium, but increases strongly upon dissociation of the respective fluorophore‐tagged ligand. In this manner, it was shown for ring‐opening metathesis ploymerization (ROMP) reactions at room temperature that the NHC_ewg ligand normally acts as the leaving group, whereas the other NHC ligand remains ligated to ruthenium.     

The Mechanism of CO2 Insertion into Iridium(I) Hydroxide and Alkoxide Bonds: A Kinetics and Computational Study

The facile insertion of CO₂ into iridium(I) hydroxide, alkoxide, and amide bonds was recently reported. In particular, [Ir(cod)(IiPr)(OH)] (IiPr=1,3‐bis(isopropyl)imidazol‐2‐ylidene) reacted with CO₂ in solution and in the solid state in a matter of minutes to give the novel [{Ir(cod)(IiPr)}₂(μ‐κ¹O:κ²O,O‐CO₃)] complex. In the present study, this reaction is probed using kinetics and theoretical studies, which enabled us to analyse its facile nature and to fully elucidate the reaction mechanism with excellent correlation between the two methods.     

Catalytic Hydrogen Production by Ruthenium Complexes from the Conversion of Primary Amines to Nitriles: Potential Application as a Liquid Organic Hydrogen Carrier

The potential application of the primary amine/nitrile pair as a liquid organic hydrogen carrier (LOHC) has been evaluated. Ruthenium complexes of formula [(p‐cym)Ru(NHC)Cl₂] (NHC=N‐heterocyclic carbene) catalyze the acceptorless dehydrogenation of primary amines to nitriles with the formation of molecular hydrogen. Notably, the reaction proceeds without any external additive, under air, and under mild reaction conditions. The catalytic properties of a ruthenium complex supported on the surface of graphene have been explored for reutilization purposes. The ruthenium‐supported catalyst is active for at least 10 runs without any apparent loss of activity. The results obtained in terms of catalytic activity, stability, and recyclability are encouraging for the potential application of the amine/nitrile pair as a LOHC. The main challenge in the dehydrogenation of benzylamines is the selectivity control, such as avoiding the formation of imine byproducts due to transamination reactions. Herein, selectivity has been achieved by using long‐chain primary amines such as dodecylamine. Mechanistic studies have been performed to rationalize the key factors involved in the activity and selectivity of the catalysts in the dehydrogenation of amines. The experimental results suggest that the catalyst resting state contains a coordinated amine.     

[IrCl2Cp*(NHC)] Complexes as Highly Versatile Efficient Catalysts for the Cross‐Coupling of Alcohols and Amines

A comparative study on the catalytic activity of a series of [IrCl₂Cp*(NHC)] complexes in several C–O and C–N coupling processes implying hydrogen‐borrowing mechanisms has been performed. The compound [IrCl₂Cp*(I^nBu)] (Cp*=pentamethyl cyclopentadiene; I^nBu=1,3‐di‐n‐butylimidazolylidene) showed to be highly effective in the cross‐coupling reactions of amines and alcohols, providing high yields in the production of unsymmetrical ethers and N‐alkylated amines. A remarkable feature is that the processes were carried out in the absence of base, phosphine, or any other external additive. A comparative study with other known catalysts, such as Shvo's catalyst, is also reported.     

Nucleophilic Addition of Amines to Ruthenium Carbenes: ortho‐(Alkynyloxy)benzylamine Cyclizations towards 1,3‐Benzoxazines

A new ruthenium‐catalyzed cyclization of ortho‐(alkynyloxy)benzylamines to dihydro‐1,3‐benzoxazines is reported. The cyclization is thought to take place via the vinyl ruthenium carbene intermediates which are easily formed from [Cp*RuCl(cod)] and N₂CHSiMe₃. The mild reaction conditions and the efficiency of the procedure allow the easy preparation of a broad range of new 2‐vinyl‐2‐substituted 1,3‐benzoxazine derivatives. Rearrangement of an internal C(sp) in the starting material into a tetrasubstituted C(sp³) atom in the final 1,3‐benzoxazine is highly remarkable.     

Mechanistic investigation of imine formation in ruthenium‐catalyzed N‐alkylation of amines with alcohols

Imines are observed frequently in ruthenium‐catalyzed N‐alkylation of amines with alcohols. Herein, nitrogen–phosphine functionalized carbene ligands were developed and used in ruthenium‐catalyzed N‐alkylation to explore the mechanism of imine formation. The results showed that strongly electron‐donating ligands were beneficial for imine formation and alcohol dehydrogenation to generate acid. In addition, with an increase of electron density of nitrogen atom in substituted amines, the yield of imines in N‐alkylation was improved. At the same time, with electron‐rich imines as substrates, the transfer hydrogenation of imines became difficult. It is suggested that strongly electron‐donating ligands and substrates caused an increase of electron density on the ruthenium center, which resulted in the elimination of hydrogen atoms in active species [LRuH₂] as hydrogen gas rather than transfer onto the imine coordinated with the ruthenium center.     

A Nickel Complex Containing a Pyramidalized,Ambiphilic Pincer Germylene Ligand

Reaction of N-heterocyclic carbene (NHC)-stabilized PGeP-type germylene Ge{o-(PiPr₂)C₆H₄}₂⋅^MeIiPr ( 1 ) (^MeIiPr=1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene) with Ni(cod)₂ gave pincer germylene complex Ni[Ge{o-(PiPr₂)C₆H₄}₂](^MeIiPr) ( 2 ), in which the Ge center of 2 is significantly pyramidalized. Theoretical calculation on 2 predicted the ambiphilicity of the germanium center, which was confirmed by reactivity studies. Thus, complex 2 reacted with both Lewis base ^MeIMe (^MeIMe=1,3,4,5-tetramethylimidazol-2-ylidene) and Lewis acid BH₃⋅SMe₂ at the germanium center to afford the adducts Ni[Ge{o-(PiPr₂)C₆H₄}₂⋅^MeIMe](^MeIiPr) ( 3 ) and Ni[Ge{o-(PiPr₂)C₆H₄}₂⋅BH₃](^MeIiPr) ( 4 ), respectively. Furthermore, the former was slowly converted to dinuclear complex Ni₂[Ge{o-(PiPr₂)C₆H₄}₂]₂(^MeIMe)₂ ( 5 ) at room temperature. Complex 5 can be regarded as a dimer of the ^MeIMe analog of 2 with a Ni-Ge-Ge-Ni linkage.     

In situ Generated Ruthenium Catalyst Systems Bearing Diverse N‐Heterocyclic Carbene Precursors for Atom‐Economic Amide Synthesis from Alcohols and Amines

The transition‐metal‐catalyzed direct synthesis of amides from alcohols and amines is herein demonstrated as a highly environmentally benign and atom‐economic process. Among various catalyst systems, in situ generated N‐heterocyclic carbene (NHC)‐based ruthenium (Ru) halide catalyst systems have been proven to be active for this transformation. However, these existing catalyst systems usually require an additional ligand to achieve satisfactory results. In this work, through extensive screening of a diverse variety of NHC precursors, we discovered an active in situ catalyst system for efficient amide synthesis without any additional ligand. Notably, this catalyst system was found to be insensitive to the electronic effects of the substrates, and various electron‐deficient substrates, which were not highly reactive with our previous catalyst systems, could be employed to afford the corresponding amides efficiently. Furthermore, mechanistic investigations were performed to provide a rationale for the high activity of the optimized catalyst system. NMR‐scale reactions indicated that the rapid formation of a Ru hydride intermediate (signal at δ=?7.8 ppm in the ¹H NMR spectrum) after the addition of the alcohol substrate should be pivotal in establishing the high catalyst activity. Besides, HRMS analysis provided possible structures of the in situ generated catalyst system.     

Mechanistic Investigation of the Ruthenium–N‐Heterocyclic‐Carbene‐Catalyzed Amidation of Amines with Alcohols

The mechanism of the ruthenium–N‐heterocyclic‐carbene‐catalyzed formation of amides from alcohols and amines was investigated by experimental techniques (Hammett studies, kinetic isotope effects) and by a computational study with dispersion‐corrected density functional theory (DFT/M06). The Hammett study indicated that a small positive charge builds‐up at the benzylic position in the transition state of the turnover‐limiting step. The kinetic isotope effect was determined to be 2.29(±0.15), which suggests that the breakage of the C? H bond is not the rate‐limiting step, but that it is one of several slow steps in the catalytic cycle. Rapid scrambling of hydrogen and deuterium at the α position of the alcohol was observed with deuterium‐labeled substrates, which implies that the catalytically active species is a ruthenium dihydride. The experimental results were supported by the characterization of a plausible catalytic cycle by using DFT/M06. Both cis‐dihydride and trans‐dihydride intermediates were considered, but when the theoretical turnover frequencies (TOFs) were derived directly from the calculated DFT/M06 energies, we found that only the trans‐dihydride pathway was in agreement with the experimentally determined TOFs.     

The “Borrowing Hydrogen Strategy” by Supported Ruthenium Hydroxide Catalysts: Synthetic Scope of Symmetrically and Unsymmetrically Substituted Amines

The N‐alkylation of ammonia (or its surrogates, such as urea, NH₄HCO₃, and (NH₄)₂CO₃) and amines with alcohols, including primary and secondary alcohols, was efficiently promoted under anaerobic conditions by the easily prepared and inexpensive supported ruthenium hydroxide catalyst Ru(OH)_x/TiO₂. Various types of symmetrically and unsymmetrically substituted “tertiary” amines could be synthesized by the N‐alkylation of ammonia (or its surrogates) and amines with “primary” alcohols. On the other hand, the N‐alkylation of ammonia surrogates (i.e., urea and NH₄HCO₃) with “secondary” alcohols selectively produced the corresponding symmetrically substituted “secondary” amines, even in the presence of excess amounts of alcohols, which is likely due to the steric hindrance of the secondary alcohols and/or secondary amines produced. Under aerobic conditions, nitriles could be synthesized directly from alcohols and ammonia surrogates. The observed catalysis for the present N‐alkylation reactions was intrinsically heterogeneous, and the retrieved catalyst could be reused without any significant loss of catalytic performance. The present catalytic transformation would proceed through consecutive N‐alkylation reactions, in which alcohols act as alkylating reagents. On the basis of deuterium‐labeling experiments, the formation of the ruthenium dihydride species is suggested during the N‐alkylation reactions.     

Stabilization of a Silaaldehyde by its η2 Coordination to Tungsten

Treatment of pyridine‐stabilized silylene complexes [(η⁵‐C₅Me₄R)(CO)₂(H)W?SiH(py)(Tsi)] (R=Me, Et; py=pyridine; Tsi=C(SiMe₃)₃) with an N‐heterocyclic carbene ^MeIⁱPr (1,3‐diisopropyl‐4,5‐dimethylimidazol‐2‐ylidene) caused deprotonation to afford anionic silylene complexes [(η⁵‐C₅Me₄R)(CO)₂W?SiH(Tsi)][H^MeIⁱPr] (R=Me ( 1‐Me ); R=Et ( 1‐Et )). Subsequent oxidation of 1‐Me and 1‐Et with pyridine‐N‐oxide (1 equiv) gave anionic η²‐silaaldehydetungsten complexes [(η⁵‐C₅Me₄R)(CO)₂W{η²‐O?SiH(Tsi)}][H^MeIⁱPr] (R=Me ( 2‐Me ); R=Et ( 2‐Et )). The formation of an unprecedented W‐Si‐O three‐membered ring was confirmed by X‐ray crystal structure analysis.     

“Living” radical polymerization of styrene catalyzed by cyclometalated ruthenium(II) complexes bearing nonlabile ligands

Cationic substitutionally inert cyclometalated ruthenium (II) and osmium (II) complexes, ([Mt(o‐C₆H₄‐2‐py)(LL)₂]PF₆), where LL‐1,10‐phenanthroline (phen) or 2,2′‐bipyridine (bipy), were used for radical polymerization of styrene. Gradual modification of the complexes within the series allowed comparison of the catalytic activity and the redox properties. There was no correlation between the reducing powers of the complexes and their catalytic activities. The osmium compound of the lowest reduction potential was not active. All the ruthenium complexes catalyzed the polymerization of styrene in a controlled manner; but the level of control and the catalytic activity were different under the same polymerization conditions. [Ru(o‐C₆H₄‐2‐py)(phen)₂]PF₆ demonstrated the best catalytic performance though its redox potential was the highest. It catalyzed the “living” polymerization with a reasonable rate at a catalyst‐to‐initiator ratio of 0.1. 1 equiv. of Al(OiPr)₃ accelerated the polymerization and improved the control, but higher amount of Al(OiPr)₃ did not speed up the polymerization and moved the process into the uncontrollable regime. Under the most optimal conditions, the controlled polymerization occurs fast without any additive and the catalyst degradation. Added free ligands inhibited the polymerization suggesting that the catalytically active ruthenium intermediates are generated via the reversible dechelation of bidentate phen or bipy ligands. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3814–3828, 2009     

N‐Heterocyclic Carbene–Ytterbium Amide as a Recyclable Homogeneous Precatalyst for Hydrophosphination of Alkenes and Alkynes

The N‐heterocyclic carbene–ytterbium(II) amides (NHC)₂Yb[N(SiMe₃)₂]₂ ( 1 : NHC: 1,3,4,5‐tetramethylimidazo‐2‐ylidene (IMe₄); 2 : NHC: 1,3‐diisopropyl‐4,5‐dimethylimidazol‐2‐ylidene (IiPr)) and the NHC‐stabilized rare‐earth phosphide (IMe₄)₃Yb(PPh₂)₂ ( 3 ) have been synthesized and fully characterized. Complexes 1 – 3 are active precatalysts for the hydrophosphination of alkenes, alkynes, and dienes and exhibited much superior catalytic activity to that of the NHC‐free amide (THF)₂Yb[N(SiMe)₂]₂. Complex 1 is the most active precursor among the three complexes. In particular, complex 1 can be recycled and recovered from the reaction media after the catalytic reactions. Furthermore, it was found that complex 3 could catalyze the polymerization of styrene to yield atactic polystyrenes with low molecular weights. To the best of our knowledge, complex 1 represents the first rare‐earth complex that can be recovered after catalytic reactions.     

Synthesis and Structures of Arene Ruthenium (II)–NHC Complexes: Efficient Catalytic α‐alkylation of ketones via Hydrogen Auto Transfer Reaction

A panel of six new arene Ru (II)‐NHC complexes 2a‐f , (NHC = 1,3‐diethyl‐(5,6‐dimethyl)benzimidazolin‐2‐ylidene 1a , 1,3‐dicyclohexylmethyl‐(5,6‐dimethyl)benzimidazolin‐2‐ylidene 1b and 1,3‐dibenzyl‐(5,6‐dimethyl)benzimidazolin‐2‐ylidene 1c ) were synthesized from the transmetallation reaction of Ag‐NHC with [(η⁶‐arene)RuCl₂]₂ and characterized. The ruthenium (II)‐NHC complexes 2a‐f were developed as effective catalysts for α‐alkylation of ketones and synthesis of bioactive quinoline using primary/amino alcohols as coupling partners respectively. The reactions were performed with 0.5 mol% catalyst load in 8 h under aerobic condition and the maximum yield was up to 96%. Besides, the different alkyl wingtips on NHC and arene moieties were studied to differentiate the catalytic robustness of the complexes in the transformations.     

Hydrosiloxane-Ti(OiPr)4: an efficient system for the reduction of primary amides into primary amines as their hydrochloride salts

A simple and useful method for the reduction of primary amides into the corresponding amines using a polymethylhydrosiloxane (PMHS)-Ti(OiPr)₄ reducing system is described. Aromatic as well as aliphatic primary amides are reduced in high selectivity and excellent yields. The reduction could proceed via dehydration of the primary amide group into the corresponding nitrile which is then reduced into the corresponding primary amine.     

Synthesis of Quinolines via a Metal‐Catalyzed Dehydrogenative N‐Heterocyclization

Efficient ruthenium‐, rhodium‐, palladium‐, copper‐ and iridium‐catalysed methodologies have been recently developed for the synthesis of quinolines by the reaction of 2‐aminobenzyl alcohols with carbonyl compounds (aldehydes and ketones) or the related alcohols. The reaction is assumed to proceed via a sequence involving initial metal‐catalysed oxidation of 2‐aminobenzyl alcohols to the related 2‐aminobenzaldehydes, followed by cross aldol reaction with a carbonyl compound under basic conditions to afford α,β‐unsaturated carbonyl compounds. These aldehydes or ketones can be also generated in situ via dehydrogenation of the related primary and secondary alcohols. In the final step cyclodehydration of the α,β‐unsaturated carbonyl compound intermediates gives quinolines. Good yields of quinolines were also obtained by reacting 2‐nitrobenzyl alcohols and secondary alcohols in the presence of a ruthenium catalyst. Finally, aniline derivatives afforded also a useful access to quinolines by the reaction with 1,3‐propanediol or 3‐amino‐1‐propanol, or in a three‐component reaction with benzyl alcohol and aliphatic alcohols.     

Three‐Component Asymmetric Catalytic Ugi Reaction—Concinnity from Diversity by Substrate‐Mediated Catalyst Assembly

The first chiral catalyst for the three‐component Ugi reaction was identified as a result of a screen of a large set of different BOROX catalysts. The BOROX catalysts were assembled in situ from a chiral biaryl ligand, an amine, water, BH₃?SMe₂ , and an alcohol or phenol. The catalyst screen included 13 different ligands, 12 amines, and 47 alcohols or phenols. The optimal catalyst system (LAP 8‐5‐47) provided α‐amino amides from an aldehyde, a secondary amine, and an isonitrile with excellent asymmetric induction. The catalytically active species is proposed to be an ion pair that consists of the chiral boroxinate anion and an iminium cation.     

Tertiary Carbinamine Synthesis by Rhodium‐Catalyzed [3+2] Annulation of N‐Unsubstituted Aromatic Ketimines and Alkynes

A convenient and waste‐free synthesis of indene‐based tertiary carbinamines by rhodium‐catalyzed imine/alkyne [3+2] annulation is described. Under the optimized conditions of 0.5–2.5 mol % [{(cod)Rh(OH)}₂] (cod=1,5‐cyclooctadiene) catalyst, 1,3‐bis(diphenylphosphanyl)propane (DPPP) ligand, in toluene at 120 °C, N‐unsubstituted aromatic ketimines and internal alkynes were coupled in a 1:1 ratio to form tertiary 1H‐inden‐1‐amines in good yields and with high selectivities over isoquinoline products. A plausible catalytic cycle involves sequential imine‐directed aromatic C? H bond activation, alkyne insertion, and a rare example of intramolecular ketimine insertion into a Rh^I–alkenyl linkage.     

Ruthenium and enzyme-catalyzed dynamic kinetic resolution of alcohols

Ruthenium acts as a good catalyst for the racemization reaction of secondary alcohols and amines. Ruthenium-catalyzed racemization is coupled with enzymatic kinetic resolution to prepare chiral compounds in 100% theoretical yield. Ten ruthenium complexes (1–10) act as a good catalyst the for racemization reaction and are also compatible with DKR process. Two other ruthenium complexes [RuCl₂(PPh₃)₃] and [Cp^*RuCl(COD)] are active for racemization reaction but their successful compatibility with DKR has not yet been reported. Ru/γ-Al₂O₃ and Ru–HAP are the heterogeneous catalysts used for the racemization reaction. They have also not been employed for DKR process. Polymer supported ruthenium is employed as a reusable racemization catalyst for aerobic DKR of alcohols.