On the role of defects and surface chemistry for surface-assisted laser desorption ionization from silicon

The generation of ions from silicon substrates in surface-assisted laser desorption ionization (SALDI) has been studied using silicon substrates prepared and etched by a variety of different methods. The different substrates were compared with respect to their ability to generate peptide mass spectra using standard liquid sample deposition. The desorption/ionization processes were studied using gas-phase analyte deposition. Mass spectra were obtained from compounds with gas-phase basicities above 850 kJmol and with molecular weights up to 370 Da. UV, VIS, and IR lasers were used for desorption. Ionization efficiencies were measured as a function of laser fluence and accumulated laser irradiance dose. Solvent vapors were added to the ion source and shown to result in fundamental laser-induced chemical and physical changes to the substrate surfaces. It is demonstrated that both the chemical properties of the substrate surface and the presence of a highly disordered structure with a high concentration of "dangling bonds" or deep gap states are required for efficient ion generation. In particular, amorphous silicon is shown to be an excellent SALDI substrate with ionization efficiencies as high as 1%, while hydrogen-passivated amorphous silicon is SALDI inactive. Based on the results, a novel model for SALDI ion generation is proposed with the following reaction steps: (1) the adsorption of neutral analyte molecules on the SALDI surface with formation of a hydrogen bond to surface Si-OH groups, (2) the electronic excitation of the substrate to form free electron/hole pairs (their relaxation results in trapped positive charges in near-surface deep gap states, causing an increase in the acidity of the Si-OH groups and proton transfer to the analyte molecules), and (3) the thermally activated dissociation of the analyte ions from the surface via a "loose" transition state.     

The role of physical and chemical properties of Pd nanostructured materials immobilized on inorganic carriers on ion formation in atmospheric pressure laser desorption/ionization mass spectrometry

Fundamental parameters influencing the ion‐producing efficiency of palladium nanostructures (nanoparticles [Pd‐NP], nanoflowers, nanofilms) during laser irradiation were studied in this paper. The nanostructures were immobilized on the surface of different solid inorganic carrier materials (porous and mono‐crystalline silicon, anodic porous aluminum oxide, glass and polished steel) by using classical galvanic deposition, electroless local deposition and sputtering. It was the goal of this study to investigate the influence of both the nanoparticular layer as well as the carrier material on ion production for selected analyte molecules. Our experiments demonstrated that the dimensions of the synthesized nanostructures, the thickness of the active layers, surface disorders, thermal conductivity and physically or chemically adsorbed water influenced signal intensities of analyte ions during surface‐assisted laser desorption/ionization (SALDI) while no effects such as plasmon resonance, photoelectric effect or catalytic activity were expected to occur. Excellent LDI abilities were seen for Pd‐NPs immobilized on steel, while Pd nanoflowers on porous silicon exhibited several disadvantages; viz, strong memory effects, dependency of the analytical signal on amount of physically and chemically adsorbed water inside porous carrier, reduced SALDI activity from unstable connections between Pd and semiconductor material, decrease of the melting point of pure silicon after Pd immobilization and resulting strong laser ablation of metal/semiconductor complex, as well as significantly changed surface morphology after laser irradiation. The analytical performance of Pd‐NP/steel was further improved by applying a hydrophobic coating to the steel surface before galvanic deposition. This procedure increased the distance between Pd‐NPs, thus reducing thermal stress upon LDI; it simultaneously decreased spot sizes of deposited sample solutions. Copyright © 2014 John Wiley & Sons, Ltd.     

Simultaneous detection of phosphatidylcholines and glycerolipids using matrix‐enhanced surface‐assisted laser desorption/ionization‐mass spectrometry with sputter‐deposited platinum film

Matrix‐assisted laser desorption/ionisation (MALDI) imaging mass spectrometry (IMS) allows for the simultaneous detection and imaging of several molecules in brain tissue. However, the detection of glycerolipids such as diacylglycerol (DAG) and triacylglycerol (TAG) in brain tissues is hindered in MALDI‐IMS because of the ion suppression effect from excessive ion yields of phosphatidylcholine (PC). In this study, we describe an approach that employs a homogeneously deposited metal nanoparticle layer (or film) for the detection of glycerolipids in rat brain tissue sections using IMS. Surface‐assisted laser desorption/ionisation IMS with sputter‐deposited Pt film (Pt‐SALDI‐IMS) for lipid analysis was performed as a solvent‐free and organic matrix‐free method. Pt‐SALDI produced a homogenous layer of nanoparticles over the surface of the rat brain tissue section. Highly selective detection of lipids was possible by MALDI‐IMS and Pt‐SALDI‐IMS; MALDI‐IMS detected the dominant ion peak of PC in the tissue section, and there were no ion peaks representing glycerolipids such as DAG and TAG. In contrast, Pt‐SALDI‐IMS allowed the detection of these glycerolipids, but not PC. Therefore, using a hybrid method combining MALDI and Pt‐SALDI (i.e., matrix‐enhanced [ME]‐Pt‐SALDI‐IMS), we achieved the simultaneous detection of PC, PE and DAG in rat brain tissue sections, and the sensitivity for the detection of these molecules was better than that of MALDI‐IMS or Pt‐SALDI alone. The present simple ME‐Pt‐SALDI approach for the simultaneous detection of PC and DAG using two matrices (sputter‐deposited Pt film and DHB matrix) would be useful in imaging analyses of biological tissue sections. Copyright © 2015 John Wiley & Sons, Ltd.     

Functionalized pyrolytic highly oriented graphite polymer film for surface‐assisted laser desorption/ionization mass spectrometry in environmental analysis

The pyrolytic highly oriented graphite polymer film (PGS) was first employed to analyze low‐mass analytes in environmental analysis by surface‐assisted laser desorption/ionization mass spectrometry (SALDI‐MS). PGS is a synthetic uniform and highly oriented graphite polymer film with high thermal anisotropic conductivity. We have found that negative ion mode SALDI‐MS using oxidized PGS (PGS‐SALDI‐MS) can be used to detect [M–H]^? ions from perfluorooctanoic acid (PFOA) and other perfluoroalkylcarboxylic acids when the PGS surface is modified with the cationic polymer polyethyleneimine (PEI). The signal intensity of PFOA when employing the PEI modification showed a ten‐fold increase over that obtained from desorption/ionization on porous silicon (DIOS). PFOA was quantified using PGS‐SALDI‐MS and the calibration curve showed a wide linear dynamic range of response (20–1000 ppb). The combination of atmospheric pressure ionization and PGS (AP‐PGS‐SALDI) showed greater signal intensity than vacuum PGS‐SALDI for deprotonated PFOA. Several other environmentally important chemicals, including perfluoroalkylsulfonic acid, pentachlorophenol, bisphenol A, 4‐hydroxy‐2‐chlorobiphenyl, and benzo[a]pyrene, were also successfully used to evaluate PGS‐SALDI‐MS. In addition, we found that nonafluoro‐1‐butanesulfonic acid was able to produce protonated peptides in positive ion PGS‐SALDI‐MS, but that perfluoropentanoic acid and trifluoroacetic acid were not. It is suggested that perfluoroalkylsulfonic acids are better protonating agents than perfluoroalkylcarboxylic acids in SALDI‐MS. Copyright © 2009 John Wiley & Sons, Ltd.     

Surface-assisted laser desorption/ionization mass spectrometry with a rotating ball interface

A rotating ball interface for surface‐assisted laser desorption/ionization (SALDI) mass spectrometry was designed and tested. One side of the ball was exposed to atmospheric pressure and the other to the vacuum in a time‐of‐flight mass spectrometer. Analytes (arginine, atenolol, reserpine, tofisopam, and chloropyramine) were applied using electrospray to a silicon substrate on the atmospheric side, the ball was rotated 180°, and the analyte was desorbed on the vacuum side using a pulsed, 200 Hz, 355 nm laser. In order to increase the desorption area, the laser focus was scanned over the substrate in a raster pattern repeated once every second. The design allows for rapid sample throughout with a sample turn‐around time as short as 5 s. Newly produced porous silicon substrates initially yielded very low ion signals, and they required several hundred laser shots to attain maximum sensitivity. In contrast, amorphous silicon did not require such ‘activation’. Quantitative analysis showed a sample‐to‐sample reproducibility of about 10%. The sensitivities with model analytes were in the 1000 to 10 000 ions/fmole range and detection limits in the low fg range. Copyright © 2010 John Wiley & Sons, Ltd.     

Metabolite imaging using matrix-enhanced surface-assisted laser desorption/ionization mass spectrometry (ME-SALDI-MS)

We describe here the use of a hybrid ionization approach, matrix-enhanced surface-assisted laser desorption/ionization mass spectrometry (ME-SALDI-MS) in bioimaging. ME-SALDI combines the strengths of traditional matrix-assisted laser desorption/ionization (MALDI) and SALDI and enables successful MS imaging of low-mass species with improved detection sensitivity. Using 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) as the MS standard, MS performances of MALDI, SALDI, and ME-SALDI are systematically compared. The analyte desorption and ionization mechanism in ME-SALDI is qualitatively speculated based on the observation of significantly reduced matrix background and improved survival yields of molecular ions. Improvements in detection sensitivity of low-mass species using ME-SALDI over MALDI in imaging are demonstrated with mouse heart and brain tissues.     

Novel Galvanic Nanostructures of Ag and Pd for Efficient Laser Desorption/Ionization of Low Molecular Weight Compounds

A simple approach for synthesis of palladium and silver nanostructures with readily adjustable morphologies was developed using galvanic electrochemical deposition, for application to surface-assisted laser desorption/ionization (SALDI) of small biological molecules. A range of fatty acids, triglycerides, carbohydrates, and antibiotics were investigated to assess the performance of the new materials. Intense analyte cations were generated from the galvanic surfaces upon UV laser irradiation such as potassium adducts for a film thickness <100 nm (originating from impurities of the electrolyte solution) and Pd and Ag cluster ions for films with a thickness >120 nm. Possible laser desorption/ionization mechanisms of these galvanic structures are discussed. The films exhibited self-organizing abilities and adjustable morphologies by changing electrochemical parameters. They did not require any stabilizing agents and were inexpensive and very easy to produce. SALDI analysis showed that the materials were stable under ambient conditions and analytical results with excellent measurement reproducibility and detection sensitivity similar to MALDI were obtained. Finally, we applied the galvanic surfaces to fast screening of natural oils with minimum sample preparation.

A novel approach of combining thin-layer chromatography with surface-assisted laser desorption/ionization (SALDI) time-of-flight mass spectrometry

A novel means of combining thin-layer chromatography (TLC) with laser desorption/ionization mass spectrometry using a liquid matrix is proposed. Surface-assisted laser desorption/ionization (SALDI) mass spectrometry, which uses a mixture of a micrometer-sized carbon powder (graphite or activated carbon, the SALDI solid) and 15% sucrose/glycerol, dissolved in an equal volume of methanol (SALDI liquid) as a SALDI matrix, is used for laser desorption mass analysis. The ablation of carbon powder from a pencil drawing was used as an alternative to the SALDI solid. The liquid matrix resembled that used in a conventional SALDI matrix system. A line was drawn before separation with a pencil on the track of the sample developed on the TLC plate. After TLC separation, approximately 0.1 microl of SALDI liquid was directly applied to the chromatographic spots on the TLC plate. Porphyrins were used to demonstrate this combination owing to the visible colors of this type of compound. The analyte signal can be easily detected by irradiating the laser along the pencil line on the TLC plate. An additive, p-toluenesulfonic acid, is added to the SALDI liquid to enhance the signal's intensity. This additive dramatically improves the signal-to-noise ratio. A detection limit of approximately 500 pg is demonstrated for porphines, which is 50 times better than that corresponding to conventional TLC SALDI.     

Surface-assisted laser desorption/ionization mass spectrometry on titania nanotube arrays

Titania nanotube arrays (NTA) generated from anodizing processes are tested as the substrate for surface-assisted laser desorption/ionization mass spectrometry (SALDI MS). The background generated from titania NTA is very low, making the approach suitable for the analysis of small molecules. The upper detectable mass is approximately 29 kDa. Homogeneous sample deposition leads to good shot-to-shot reproducibility and suitability for quantitative analysis. Additionally, phosphopeptides can be selectively trapped on the titania NTA substrate, as illustrated by simply depositing a tryptic digest of beta-casein followed by titania NTA SALDI MS analysis. The detection limit for small organics and peptides is in low fmol.     

Exploring the interactions between gold nanoparticles and analytes through surface‐assisted laser desorption/ionization mass spectrometry

Surface‐assisted laser desorption/ionization mass spectrometry (SALDI‐MS) is applied to provide strong evidence for the chemical reactions of functionalized gold nanoparticles (Au NPs) with analytes – Hg²⁺ ions induced MPA?Au NPs aggregation in the presence of 2,6‐pyridinedicarboxylic acid (PDCA) and H₂O₂ induced fluorescence quenching of 11‐MUA?Au NDs. PDCA‐Hg²⁺‐MPA coordination is responsible for Au NPs aggregation, while the formation of 11‐MUA disulfide compounds that release into the bulk solution is responsible for H₂O₂‐induced fluorescence quenching. In addition to providing information about the chemical structures, SALDI‐MS is also selective and sensitive for the detection of Hg²⁺ ions and H₂O₂. The limits of detection (LODs) for Hg²⁺ ions and H₂O₂ by SALDI‐MS were 300 nM and 250 µM, respectively. The spot‐to‐spot variations in the two studies were both less than 18% (50 sample spots). Our results reveal that SALDI‐MS can be used to study analyte‐induced changes in the surface properties of nanoparticles. Copyright © 2010 John Wiley & Sons, Ltd.     

Determination of rhenium and osmium complexes by surface-assisted laser desorption/ionization coupled to Orbitrap mass analyzer

A surface-assisted laser desorption/ionization (SALDI) source is coupled to the Orbitrap mass analyzer; the instrumental approach is tested for the analysis of rhenium (Re) and osmium (Os) complexes with 8-mercaptoquinoline. Silicon (Si) material obtained by laser treatment of monocrystalline Si is used as SALDI substrate. All studied complexes are detected as radical cations, with no protonated molecules. The comparison of SALDI, matrix-assisted laser desorption/ionization (MALDI), and direct laser desorption/ionization (LDI) on metal plates in the same instrumental setup demonstrated that the detection of the studied complexes using SALDI provides the highest sensitivity. The ability to analyze samples rapidly, high purity of spectra, and good analytical parameters make SALDI coupled to the Orbitrap mass analyzer a potentially powerful tool for the detection of Re and Os complexes and related organic, UV-absorbing compounds.

Using surfactants to enhance the analyte signals in activated carbon, surface-assisted laser desorption/ionization (SALDI) mass spectrometry

The effect of surface activity in surface-assisted laser desorption/ionization (SALDI) mass spectrometry was examined. Several surfactants, including p-tolunensulfonic acid (PTSA), sodium dodecyl sulfate and alkyltrimethylammonium bromide, were used as analytes or additives in the SALDI matrix to demonstrate the surface activity effect. The experimental results demonstrate that analytes that have good surface activity have good sensitivity. Adding suitable amounts of surfactants to the SALDI matrix can dramatically enhance the sensitivity of analytes lacking surface activity. We propose that the enhancement of analyte signals is due to the ionic interaction between ionic surfactants and analytes because non-ionic surfactant additives in the SALDI matrix do not affect the analyte signals. The detection limit of methylephedrine can be as low as 100 pg in the SALDI analysis of 0.5 M PTSA additive in the SALDI matrix. Although other surfactants can also be used as matrix additives to enhance the analyte signal, they do not improve the ion abundance as much as PTSA does.     

A study of enhanced ion formation from metal‐semiconductor complexes in atmospheric pressure laser desorption/ionization mass spectrometry

The study of the key parameters impacted surface‐assisted laser desorption/ionization‐mass spectrometry is of broad interest. In previous studies, it has been shown that surface‐assisted laser desorption/ionization‐mass spectrometry is a complex process depending on multiple factors. In the presented study, we showed that neither porosity, light absorbance nor surface hydrophobicity alone influence the enhancement phenomena observed from the hybrid metal‐semiconductor complexes versus individual targets, but small changes in the analyte attaching to the target significantly affect laser desorption ionization‐efficiency. By means of Raman spectroscopy and scanning electron microscopy, it was revealed that the formation of an amorphous analyte layer after drying on a solid substrate was essential for the enhanced laser desorption ionization‐signal observed from the hybrid metal‐semiconductor targets, and the crystallization properties of the analyte appeared as a function of the substrate. Obtained results were used for the screening of regular and lactose‐free milk samples through the hybrid metal‐semiconductor target. Copyright © 2016 John Wiley & Sons, Ltd.     

Surface cleaning of germanium nanodot ionization substrate for surface‐assisted laser desorption/ionization mass spectrometry

In surface‐assisted laser desorption/ionization mass spectrometry (SALDI‐MS), a chemical background signal, arising from organic contaminants such as plasticizers, is frequently observed mainly under m/z ca. 600, which impairs the advantages of the matrix‐free approach. Silver salts, which are used for the cationization of aromatic compounds, are also difficult to remove completely after the measurements. In this study, surface cleaning techniques used in semiconductor processing were used to clean our developed silicon‐based SALDI substrate on which self‐assembled germanium nanodots (GeNDs) had been deposited (termed a GeND chip). An immersion cleaning method using acetone with sonication, and a sulfuric‐peroxide mixture (SPM) cleaning method using a mixture of H₂SO₄/H₂O₂/deionized water, were examined for their effectiveness in removing organic compounds and residual silver salts. Removal of both types of contaminants was successfully performed by SPM cleaning. The limit of detection for glutathione was improved from ca. 5 pmol without cleaning to ca. 50 fmol after the SPM cleaning. Since GeND chips can tolerate acidic cleaning and sonication due to their chemical inertness and rigid nanodot structures, they appear to be an ideal reusable SALDI substrate. Copyright © 2009 John Wiley & Sons, Ltd.     

Enhanced detection of phosphopeptides in matrix-assisted laser desorption/ionization mass spectrometry using ammonium salts

Matrix-assisted laser desorption/ionization mass spectrometry (MALDI MS) has been used successfully to detect phosphorylation sites in proteins. Applications may be limited by the low response of phosphopeptides compared to nonphosphorylated peptides in MALDI MS. The addition of ammonium salts to the matrix/analyte solution substantially enhances the signal for phosphopeptides. In examples shown for equimolar mixtures, the phosphorylated peptide peaks become the largest peaks in the spectrum upon ammonium ion addition. This can allow for the identification of phosphopeptides in an unfractionated proteolytic digestion mixture. Sufficient numbers of protonated phosphopeptides can be generated such that they can be subjected to postsource decay analysis, in order to confirm the number of phosphate groups present. The approach works well with the common MALDI matrices such as α-cyano-4-hydroxycinnamic acid and 2,5-dihydroxybenzoic acid, and with ammonium salts such as diammonium citrate and ammonium acetate.     

Recent advances in SALDI-MS techniques and their chemical and bioanalytical applications

Although laser desorption mass spectrometry was introduced in the 1960s, the potential of laser mass spectrometry was not realised until the introduction of matrix-assisted laser desorption/ionisation (MALDI) in the 1980s. The technique relies on light-absorbing compounds called matrices that are co-crystallised with the analyte to achieve high ionisation and desorption efficiencies. MALDI offers a lot of advantages and is an indispensable tool in macromolecule analysis. However, the presence of the matrix also produces a high chemical background in the region below m/z 700 in the mass spectrum. Surface-assisted laser desorption/ionisation (SALDI) substitutes the chemical matrix of MALDI for an active surface, which means that matrix interference can be eliminated. SALDI mass spectrometry has evolved in recent years into a technique with great potential to provide insight into many of the challenges faced in modern research, including the growing interest in “omics” and the demands of pharmaceutical science. A great variety of materials have been reported to work in SALDI. Examples include a number of nanomaterials and surfaces. The unique properties of nanomaterials greatly facilitate analyte desorption and ionisation. This article reviews recent advances made in relation to carbon- and semiconductor-based SALDI strategies. Examples of their environmental, chemical and biomedical applications are discussed with the aim of highlighting progression in the field and the robustness of the technique, as well as to evaluate the strengths and weaknesses of individual approaches. In addition, this article describes the physical and chemical processes involved in SALDI and explains how the unique physical and electronic properties of nanostructured surfaces allow them to substitute for the matrix in energy transfer processes.     

Effect of urea surface modification and photocatalytic cleaning on surface‐assisted laser desorption ionization mass spectrometry with amorphous TiO2 nanoparticles

We have investigated the effect of urea surface modification and the photocatalytic cleaning on surface‐assisted laser desorption ionization mass spectrometry (SALDI‐MS) with amorphous TiO₂ nanoparticles for the reduction of the background noise and the improvement of the sensitivity. In the use of nanoparticles of high surface area, chemical background signals arising from ambient environments and organic contaminants can frequently be serious problems below 500 Da, possibly reducing the advantages of the matrix‐free approach. In this study, removal of contaminants and enhanced SALDI efficiency were easily achieved with UV irradiation via the photocatalyst effect of TiO₂ before SALDI‐MS measurements. The surface cleaning achieved by the UV photocatalytic procedure reduced the background noise and increased the peak intensities of peptides. In addition, we found that urea surface modification of TiO₂ nanoparticles increased the performance of the TiO₂‐SALDI‐MS. (1) The urea‐surface modification of TiO₂ made it possible to produce proton‐adduct forms without citrate buffer, resulting in low background noises below 500 Da, in contrast to the essential use of a citrate buffer in the bare TiO₂‐SALDI‐MS. (2) The detection sensitivity of angiotensin I increased to 0.3 fmol with the urea‐surface modification, as compared to the use of bare TiO₂ nanoparticles (6 fmol). The urea‐TiO₂ could ionize proteins of more than 20 000 Da such as trypsinogen (600 fmol). (3) The urea modification of TiO₂ had the advantage of selective detection of phosphopeptides without sample clean up, or prefractionation in tryptic digest products of bovine hemoglobin. Copyright © 2009 John Wiley & Sons, Ltd.     

An activated carbon substrate surface for laser desorption mass spectrometry

A method to obtain laser desorption/ionization mass spectra of organic compounds by depositing sample solutions onto a carbon substrate surface is demonstrated. The substrate consists of a thin layer of activated carbon particles immobilized on an aluminum support. In common with the porous carbon suspension samples used in previous “surface-assisted laser desorption/ionization” (SALDI) work, the mass spectra contain only a few “matrix” background ion peaks, minimizing interference with analyte ion peaks. The presence of glycerol ensured that the ion signals were stable over hundreds of laser shots. In addition, the carbon substrate surface has several advantages over the suspension samples. The use of a very thin layer of carbon significantly improves the sensitivity. Detection limits range from attomoles for crystal violet to femtomoles for bradykinin. Very little sample preparation is required as the analyte solution is simply pipetted onto the substrate surface and glycerol added. When using an alternate sample deposition method, a mass resolution for bradykinin of 1800 is achieved in linear time-of-flight mode. This is close to the resolution limit set by the detector system and above instrument specification for matrix-assisted laser desorption/ionization mass spectra.     

Surface‐Assisted Laser Desorption/Ionization Mass Spectrometric Detection of Biomolecules by Using Functional Single‐Walled Carbon Nanohorns as the Matrix

A surface‐assisted laser desorption/ionization time‐of‐flight mass spectrometric (SALDI‐TOF MS) method was developed for the analysis of small biomolecules by using functional single‐walled carbon nanohorns (SWNHs) as matrix. The functional SWNHs could transfer energy to the analyte under laser irradiation for accelerating its desorption and ionization, which led to low matrix effect, avoided fragmentation of the analyte, and provided high salt tolerance. Biomolecules including amino acids, peptides, and fatty acids could successfully be analyzed with about 3‐ and 5‐fold higher signals than those obtained using conventional matrix. By integrating the advantages of SWNHs and the recognition ability of aptamers, a selective approach was proposed for simultaneous capture, enrichment, ionization, and MS detection of adenosine triphosphate (ATP). This method showed a greatly improved detection limit (1.0 μM ) for the analysis of ATP in complex biological samples. This newly designed protocol not only opened a new application of SWNHs, but also offered a new technique for selective MS analysis of biomolecules based on aptamer recognition systems.     

Study on ion formation in electrospray droplet impact secondary ion mass spectrometry

A new type of cluster secondary ion mass spectrometry (SIMS), named electrospray droplet impact (EDI), has been developed in our laboratory. In general, rather strong negative ions as well as positive ions can be generated by EDI compared with conventional SIMS. In this work, various aspects of ion formation in EDI are investigated. The Brønsted bases (proton acceptor) and acids (proton donor) mixed in the analyte samples enhanced the signal intensities of deprotonated molecules (negative ions) and protonated molecules (positive ions), respectively, for analytes. This suggests the occurrence of heterogeneous proton transfer reactions (i.e. M + M′ → [M+H]⁺ + [M′? H]^?) in the shockwave‐heated selvedge of the colliding interface between the water droplet and the solid sample deposited on the metal substrate. EDI‐SIMS shows a remarkable tolerance to the large excess of salts present in samples. The mechanism for desorption/ionization in EDI is much simpler than those for MALDI and SIMS because only very thin sample layers take part in the shockwave‐heated selvedge and complicated higher‐order reactions are largely suppressed. Copyright © 2007 John Wiley & Sons, Ltd.