Dissecting the Vaporization Enthalpies of Ionic Liquids by Exclusively Experimental Methods: Coulomb Interaction,Hydrogen Bonding,and Dispersion Forces

The quantification of hydrogen bonding and dispersion energies from vaporization enthalpies is a great challenge. Dissecting interaction energies is particularly difficult for ionic liquids (ILs), for which the composition of the different types of interactions is known neither for the liquid nor for the gas phase. In this study, we demonstrate the existence of ion pairs in the gas phase and dissect the interaction energies exclusively from measured vaporization enthalpies of different alkylated protic ILs (PILs) and aprotic ILs (AILs) and the molecular analogues of their cations. We demonstrate that the evaporated ion pairs are characterized by H‐bond‐enhanced Coulomb interaction. The overall interaction energy for the ILs in the bulk phase is composed of Coulomb interaction (76 kJ mol^?1), hydrogen bonding (38 kJ mol^?1), and minor dispersion interaction (10 kJ mol^?1). Thus, hydrogen bonding prominently contributes to the overall interaction energy of PILs, which is reflected in the properties of this class of liquids.     

二元无机物标准熵 So298的拓扑研究

为了预测二元无机物的标准熵,基于分子图的连接矩阵和离子参数gi、qi,提出了一种新的连接性指数mQ, mG及其逆指数mQ’, mG’。 qi、gi定义为：qi=(1.1+Zi1.1) /(1.7+ni), gi=(1.4+Zi) /(0.9+ri+ri-1),其中Zi 、ni和 ri分别代表离子i的电荷数、最外层主量子数和半径。从0Q, 0Q’, 1G,和1G’,利用多元线性回归分析方法和人工神经网络方法,可以构建优良的QSPR模型。对371个二元无机物,其多元线性模型及神经网络模型的相关系数、标准偏差和平均绝对偏差分别是：0.9905, 8.29 J.K-1.mol-1, 6.48 J. K-1.mol-1, 0.9960, 5.37 J.K-1.mol-1 和 3.90 J.K-1.mol-1。留一法交叉验证表明,其多元线性模型具有良好的稳定性。两个模型对187个未进入模型的二元无机物的标准熵的预测值和实验值之间的相关系数、标准偏差和平均绝对偏差分别是：0.9897, 8.64 J. K-1.mol-1, 6.84 J. K-1.mol-1, 0.9957, 5.63 J.K-1.mol-1, 和 4.18 J.K-1.mol-1。研究表明,本文方法在预测二元无机物标准熵时比文献方法更有效,两种模型均能较精确的预测二元无机物的标准熵,且神经网络模型的预测结果更精确。     

Oxocarbon Salts for Fast Rechargeable Batteries

Oxocarbon salts (M₂(CO)_n) prepared through one‐pot proton exchange reactions with different metal ions (M=Li, Na, K) and frameworks (n=4, 5, 6) have been rationally designed and used as electrodes in rechargeable Li, Na, and K‐ion batteries. The results show that M₂(CO)₅/M₂(CO)₆ salts can insert two or four metal ions reversibly, while M₂(CO)₄ shows less electrochemical activity. Especially, we discover that the K₂C₆O₆ electrode enables ultrafast potassium‐ion insertion/extraction with 212 mA h g^?1 at 0.2 C and 164 mA h g^?1 at 10 C. This behavior can be ascribed to the natural semiconductor property of K₂C₆O₆ with a narrow band gap close to 0.9 eV, the high ionic conductivity of the K‐ion electrolyte, and the facilitated K‐ion diffusion process. Moreover, a first example of a K‐ion battery with a rocking‐chair reaction mechanism of K₂C₆O₆ as cathode and K₄C₆O₆ as anode is introduced, displaying an operation voltage of 1.1 V and an energy density of 35 Wh kg^?1. This work provides an interesting strategy for constructing rapid K‐ion batteries with renewable and abundant potassium materials.     

Ionic Association of the Ionic Liquids [C4mim][BF4], [C4mim][PF6], and [Cnmim]Br in Molecular Solvents

Considering the ionic nature of ionic liquids (ILs), ionic association is expected to be essential in solutions of ILs and to have an important influence on their applications. Although numerous studies have been reported for the ionic association behavior of ILs in solution, quantitative results are quite scarce. Herein, the conductivities of the ILs [C_nmim]Br (n=4, 6, 8, 10, 12), [C₄mim][BF₄], and [C₄mim][PF₆] in various molecular solvents (water, methanol, 1‐propanol, 1‐pentanol, acetonitrile, and acetone) are determined at 298.15 K as a function of IL concentration. The conductance data are analyzed by the Lee–Wheaton conductivity equation in terms of the ionic association constant (K_A) and the limiting molar conductance (Λ_m⁰). Combined with the values for the Br^? anion reported in the literature, the limiting molar conductivities and the transference numbers of the cations and [BF₄]^? and [PF₆]^? anions are calculated in the molecular solvents. It is shown that the alkyl chain length of the cations and type of anion affect the ionic association constants and limiting molar conductivities of the ILs. For a given anion (Br^?), the Λ_m⁰ values decrease with increasing alkyl chain length of the cations in all the molecular solvents, whereas the K_A values of the ILs decrease in organic solvents but increase in water as the alkyl chain length of the cations increases. For the [C₄mim]⁺ cation, the limiting molar conductivities of the ILs decrease in the order Br^?>[BF₄]^?>[PF₆]^?, and their ionic association constants follow the order [BF₄]^?>[PF₆]^?>Br^? in water, acetone, and acetonitrile. Furthermore, and similar to the classical electrolytes, a linear relationship is observed between ln K_A of the ILs and the reciprocal of the dielectric constants of the molecular solvents. The ILs are solvated to a different extent by the molecular solvents, and ionic association is affected significantly by ionic solvation. This information is expected to be useful for the modulation of the IL conductance by the alkyl chain length of the cations, type of anion, and physical properties of the molecular solvents.     

Straightforward Synthesis of the Brønsted Acid hfipOSO3H and its Application for the Synthesis of Protic Ionic Liquids

The easily accessible hexafluoroisopropoxysulfuric acid ( 1 , hfipOSO₃H ; hfip=C(H)(CF₃)₂) was synthesized by the reaction of hexafluoroisopropanol and chlorosulfonic acid on the kilogram scale and isolated in 98 % yield. The calculated gas‐phase acidity (GA) value of 1 is 58 kJ mol^?1 lower in ΔG° than that of sulfuric acid (GA value determined by a CCSD(T)‐MP2 compound method). Considering the gas‐phase dissociation constant as a measure for the intrinsic molecular acid strength, a hfipOSO₃H molecule is more than ten orders of magnitude more acidic than a H₂SO₄ molecule. The acid is a liquid at room temperature, distillable at reduced pressure, stable for more than one year in a closed vessel, reactive towards common solvents, and decomposes above 180 °C. It is a versatile compound for further applications, such as the synthesis of ammonium‐ and imidazolium‐based air‐ and moisture‐stable protic ionic liquids (pILs). Among the six synthesized ionic compounds, five are pILs with melting points below 100 °C and three of them are liquids at nearly room temperature. The conductivities and viscosities of two representative ILs were investigated in terms of Walden plots, and the pILs were found to be little associated ILs, comparable to conventional aprotic ILs.     

Calorimetric study of the glassy state XII. Plural glass-transition phenomena of ethanol

Ethanol was found to give a metastable crystalline phase (crystal-II) when the liquid was cooled at a moderate rate. Glassy states of liquid and of newly found crystal-II were obtained in the calorimeter cell by controlling the cooling rate of the liquid. The heat capacities of these phases as well as that of the stable crystal-I were measured by an adiabatic calorimeter in the temperature range between 14 and 300 K. The glass transition temperature T_g, the heat-capacity jump at T_g, and the residual entropy were found to be 97 K, 35.3 J K^?1 mol^?1, and 8.93 J K^?1 mol^?1 for the glassy liquid, and 97 K, 22.8 J K^?1 mol^?1, and 4.24 J K^?1 mol^?1 for the glassy crystal-II, respectively. The values for the residual entropy are referred to the third-law entropy for crystal-I.The heat capacities reported previously for the supercooled liquid by Gibson et al. and by Parks and Kelley agree well with those for the metastable crystal-II. Those of the supercooled liquid connect smoothly with those obtained for the liquid above the melting temperature. Thus, ethanol is found to be another example of a low-molecular-weight compound which shows multiple glass-transition phenomena.     

Study of the kinetics and activation parameters of reduction of Mn(III) to Mn(II) by SO3 2− ion in (MnSiW11O40H2)5- heteropoly ion

In order to gain an insight into the mechanism of reduction of Mn(III) heteropoly ions, and also to establish the conditions for use of some of these ions as oxidizing agent, following measurements have been made. The pseudo-first order rate constants, k_obs, have been determined and specific rate constants, k, were calculated from the plots of k_obs against SO₃ ^2? concentrations. A plot of ln(k₂/T) against inverse temperature gives enthalpy of activation as 10.67 kJ mol^?1 and entropy of activation as ?237.90 J K^?1 mol^?1. Effects of ionic strength and pH have also been studied over a limited range.     

Formation of a Thymine‐HgII‐Thymine Metal‐Mediated DNA Base Pair: Proposal and Theoretical Calculation of the Reaction Pathway

A reaction mechanism that describes the substitution of two imino protons in a thymine:thymine (T:T) mismatched DNA base pair with a Hg^II ion, which results in the formation of a (T)N3‐Hg^II‐N3(T) metal‐mediated base pair was proposed and calculated. The mechanism assumes two key steps: The formation of the first Hg^II? N3(T) bond is triggered by deprotonation of the imino N3 atom in thymine with a hydroxo ligand on the Hg^II ion. The formation of the second Hg^II? N3(T) bond proceeds through water‐assisted tautomerization of the remaining, metal‐nonbonded thymine base or through thymine deprotonation with a hydroxo ligand of the Hg^II ion already coordinated to the thymine base. The thermodynamic parameters ΔG_R=?9.5 kcal mol^?1, ΔH_R=?4.7 kcal mol^?1, and ΔS_R=16.0 cal mol^?1 K^?1 calculated with the ONIOM (B3LYP:BP86) method for the reaction agreed well with the isothermal titration calorimetric (ITC) measurements by Torigoe et al. [H. Torigoe, A. Ono, T. Kozasa, Chem. Eur. J. 2010 , 16, 13218–13225]. The peculiar positive reaction entropy measured previously was due to both dehydration of the metal and the change in chemical bonding. The mercury reactant in the theoretical model contained one hydroxo ligand in accord with the experimental pK_a value of 3.6 known for an aqua ligand of a Hg^II center. The chemical modification of T:T mismatched to the T‐Hg^II‐T metal‐mediated base pair was modeled for the middle base pair within a trinucleotide B‐DNA duplex, which ensured complete dehydration of the Hg^II ion during the reaction.     

A kinetic study of the oxidation of L-ascorbic acid by chromium(VI)

The reaction between chromium(VI) and L-ascorbic acid has been studied by spectrophotometry in the presence of aqueous citrate buffers in the pH range 5.69–7.21. The reaction is slowed down by an increase of the ionic strength. At constant ionic strength, manganese(II) ion does not exert any appreciable inhibition effect on the reaction rate. The rate law found is where K_p is the equilibrium constant for protonation of chromate ion and k_r is the rate constant for the redox reaction between the active forms of the oxidant (hydrogenchromate ion) and the reductant (L-hydrogenascorbate ion). The activation parameters associated with rate constant k_r are E_a = 20.4 ± 0.9 kJ mol^?1, ΔH^≠ = 17.9 ± 0.9 kJ mol^?1, and ΔS^≠=?152 ± 3 J K^?1 mol^?1. The reaction thermodynamic magnitudes associated with equilibrium constant K_p are ΔH⁰ = 16.5 ± 1.1 kJ mol^?1 and ΔS⁰ = 167 ± 4 J K^?1 mol^?1. A mechanism in accordance with the experimental data is proposed for the reaction. © 1993 John Wiley & Sons, Inc.     

(Nitronyl Nitroxide)‐Substituted Trioxytriphenylamine Radical Cation Tetrachlorogallate Salt: A 2p‐Electron‐Based Weak Ferromagnet Composed of a Triplet Diradical Cation

The synthesis and the solid state magnetic properties of (nitronyl nitroxide)‐substituted trioxytriphenylamine radical cation tetrachlorogallate, NNTOT+·GaCl4? , are reported. In the temperature region between 300 and 3 K, the magnetic behavior is characterized by the strong intramolecular ferromagnetic interaction (J/k_B=+400 K) between the radical ( NN ) and the radical cation ( TOT ⁺) and the weak intermolecular antiferromagnetic interaction (J/k_B=?1.9 K) between NNTOT⁺ ions. Below 3 K, a 3D‐type long‐range magnetic ordering into a weak ferromagnet was observed (T_N=2.65 K). The magnetic entropy (S_mag=8.97 J K^?1 mol^?1) obtained by the heat capacity measurement is in good agreement with the theoretical value of R ln3=9.13 J K^?1 mol^?1 based on the S=1 state.     

The Kinetics of Ferrocene Volatilisation from an Ionic Liquid

The volatilisation of ferrocene (Fc), dissolved in the ionic liquid N‐butyl‐N‐methylpyrrolidinium bis(trifluoromethylsulfonyl)imide, [C₄mpyrr][NTf₂], to the gas phase has been indirectly monitored by cyclic voltammetry and chronoamperometry. Simulation of the observed trends in concentration with time using a simple model allowed quantification of the process. Volatilisation of dissolved Fc under flowing wet and dry dinitrogen gas (N₂) was found to be kinetically limited with a rate constant in the region of 2×10^?7 cm s^?1. The activation energy of diffusion for Fc was found to be 28.2±0.7 kJ mol^?1, while the activation energy of volatilisation of Fc from [C₄mpyrr][NTf₂] to dry N₂ was found to be 85±2 kJ mol^?1.     

Kinetics and mechanism of the oxidation of iron(II) ion by chlorine dioxide in aqueous solution

The mechanism by which an excess of iron(II) ion reacts with aqueous chlorine dioxide to produce iron(III) ion and chloride ion has been determined. The reaction proceeds via the formation of chlorite ion, which in turn reacts with additional iron(II) to produce the observed products. The first step of the process, the reduction of chlorine dioxide to chlorite ion, is fast compared to the subsequent reduction of chlorite by iron(II). The overall stoichiometry is The rate is independent of pH over the range from 3.5 to 7.5, but the reaction is assisted by the presence of acetate ion. Thus the rate law is given by At an ionic strength of 2.0 M and at 25°C, k_u = (3.9 ± 0.1) × 10³ L mol^?1 s^?1 and k_c = (6 ± 1) × 10⁴ L mol^?1 s^?1. The formation constant for the acetatoiron(II) complex, K_f, at an ionic strength of 2.0 M and 25°C was found to be (4.8 ± 0.8) × 10^?2 L mol^?1. The activation parameters for the reaction were determined and compared to those for iron(II) ion reacting directly with chlorite ion. At 0.1 M ionic strength, the activation parameters for the two reactions were found to be identical within experimental error. The values of ΔH? and ΔS? are 64 ± 3 kJ mol^?1 and + 40 ± 10 J K^?1 mol^?1 respectively. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 554–565, 2004     

Alkaline‐Earth Metal Cations as Structure Building Blocks for Molecular Cages with Entrapment and Controlled Release of Quintuple Ionic Aggregates

Currently, main‐group metal cations are totally neglected as the structure‐building blocks for the self‐assembly of supramolecular coordination metallocages due to the lack of directional bonding. However, here we show that a common Arrhenius acid–base neutralization allows the alkaline‐earth metal cations to act as charged binders, easily connecting two or more highly directional anionic transition‐metal‐based metalloligands to coordination polymers. With a metal salt such as K⁺PF₆^? added during the neutralization, the main‐group metal‐connected skeleton can be templated by the largest yet reported ionic‐aggregate anion, K₂(PF₆)₃^?, formed from KPF₆ in solution, into molecular metallocages, encapsulating the ion. Crystal‐structure details, DFT‐calculation results, and controlled‐release behavior support the presence of K₂(PF₆)₃^? as a guest in the cage. Upon removal of PF₆^? ions, the cage stays intact. Other ions like BF₄^? can be put back in.     

Supramolecular Binding Thermodynamics by Dispersion‐Corrected Density Functional Theory

The equilibrium association free enthalpies ΔG_a for typical supramolecular complexes in solution are calculated by ab initio quantum chemical methods. Ten neutral and three positively charged complexes with experimental ΔG_a values in the range 0 to ?21 kcal mol^?1 (on average ?6 kcal mol^?1) are investigated. The theoretical approach employs a (nondynamic) single‐structure model, but computes the various energy terms accurately without any special empirical adjustments. Dispersion corrected density functional theory (DFT‐D3) with extended basis sets (triple‐ζ and quadruple‐ζ quality) is used to determine structures and gas‐phase interaction energies (ΔE), the COSMO‐RS continuum solvation model (based on DFT data) provides solvation free enthalpies and the remaining ro‐vibrational enthalpic/entropic contributions are obtained from harmonic frequency calculations. Low‐lying vibrational modes are treated by a free‐rotor approximation. The accurate account of London dispersion interactions is mandatory with contributions in the range ?5 to ?60 kcal mol^?1 (up to 200 % of ΔE). Inclusion of three‐body dispersion effects improves the results considerably. A semilocal (TPSS) and a hybrid density functional (PW6B95) have been tested. Although the ΔG_a values result as a sum of individually large terms with opposite sign (ΔE vs. solvation and entropy change), the approach provides unprecedented accuracy for ΔG_a values with errors of only 2 kcal mol^?1 on average. Relative affinities for different guests inside the same host are always obtained correctly. The procedure is suggested as a predictive tool in supramolecular chemistry and can be applied routinely to semirigid systems with 300–400 atoms. The various contributions to binding and enthalpy–entropy compensations are discussed.     

Thermodynamics of Hydrogen Adsorption on Metal‐Organic Frameworks

Interaction between adsorbed hydrogen and the coordinatively unsaturated Mg²⁺ and Co²⁺ cationic centres in Mg‐MOF‐74 and Co‐MOF‐74, respectively, was studied by means of variable‐temperature infrared (VTIR) spectroscopy. Perturbation of the H₂ molecule by the cationic adsorbing centre renders the H? H stretching mode IR‐active at 4088 and 4043 cm^?1 for Mg‐MOF‐74 and Co‐MOF‐74, respectively. Simultaneous measurement of integrated IR absorbance and hydrogen equilibrium pressure for spectra taken over the temperature range of 79–95 K allowed standard adsorption enthalpy and entropy to be determined. Mg‐MOF‐74 showed ΔH⁰=?9.4 kJ mol^?1 and ΔS⁰=?120 J mol^?1 K^?1, whereas for Co‐MOF‐74 the corresponding values of ΔH⁰=?11.2 kJ mol^?1 and ΔS⁰=?130 J mol^?1 K^?1 were obtained. The observed positive correlation between standard adsorption enthalpy and entropy is discussed in the broader context of corresponding data for hydrogen adsorption on cation‐exchanged zeolites, with a focus on the resulting implications for hydrogen storage and delivering.     

Kinetics of the mercury(II)‐catalyzed substitution of coordinated cyanide ion in hexacyanoruthenate(II) by nitroso‐R‐salt

The kinetics and mechanism of Hg²⁺‐catalyzed substitution of cyanide ion in an octahedral hexacyanoruthenate(II) complex by nitroso‐R‐salt have been studied spectrophotometrically at 525 nm (λ_max of the purple‐red–colored complex). The reaction conditions were: temperature = 45.0 ± 0.1°C, pH = 7.00 ± 0.02, and ionic strength (I) = 0.1 M (KCl). The reaction exhibited a first‐order dependence on [nitroso‐R‐salt] and a variable order dependence on [Ru(CN)₆^4?]. The initial rates were obtained from slopes of absorbance versus time plots. The rate of reaction was found to initially increase linearly with [nitroso‐R‐salt], and finally decrease at [nitroso‐R‐salt] = 3.50 × 10^?4 M. The effects of variation of pH, ionic strength, concentration of catalyst, and temperature on the reaction rate were also studied and explained in detail. The values of k₂ and activation parameters for catalyzed reaction were found to be 7.68 × 10^?4 s^?1 and E_a = 49.56 ± 0.091 kJ mol^?1, ΔH^≠ = 46.91 ± 0.036 kJ mol^?1, ΔS^≠ = ?234.13 ± 1.12 J K^?1 mol^?1, respectively. These activation parameters along with other experimental observations supported the solvent assisted interchange dissociative (I_d) mechanism for the reaction. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 41: 215–226, 2009     

A Remarkable Solvent Effect on the Nuclearity of Neutral Titanium(IV)‐Based Helicate Assemblies

The spontaneous self‐assembly of a neutral circular trinuclear Ti^IV‐based helicate is described through the reaction of titanium(IV) isopropoxide with a rationally designed tetraphenolic ligand. The trimeric ring helicate was obtained after diffusion of n‐pentane into a solution with dichloromethane. The circular helicate has been characterized by using single‐crystal X‐ray diffraction study, ¹³C CP‐MAS NMR and ¹H NMR DOSY solution spectroscopic, and positive electrospray ionization mass‐spectrometric analysis. These analytical data were compared with those obtained from a previously reported double‐stranded helicate that crystallizes in toluene. The trimeric ring was unstable in a pure solution with dichloromethane and transformed into the double‐stranded helicate. Thermodynamic analysis by means of the PACHA software revealed that formation of the double‐stranded helicates was characterized by ΔH(toluene)=?30 kJ mol^?1 and ΔS(toluene)=+357 J K^?1 mol^?1, whereas these values were ΔH(CH₂Cl₂)=?75 kJ mol^?1 and ΔS(CH₂Cl₂)=?37 J K^?1 mol^?1 for the ring helicate. The transformation of the ring helicate into the double‐stranded helicate was a strongly endothermic process characterized by ΔH(CH₂Cl₂)=+127 kJ mol^?1 and ΔH(n‐pentane)=+644 kJ mol^?1 associated with a large positive entropy change ΔS=+1115 J K^?1?mol^?1. Consequently, the instability of the ring helicate in pure dichloromethane was attributed to the rather high dielectric constant and dipole moment of dichloromethane relative to n‐pentane. Suggestions for increasing the stability of the ring helicate are given.     

Complexation kinetics of Fe2+ with 1,10‐phenanthroline forming ferroin in acidic solutions

The formation kinetics of ferroin is studied under varied acid conditions at 25°C and fixed ionic strength (0.48 mol dm^?3) under pseudo‐first‐order conditions with respect to Fe²⁺ by using the stopped‐flow technique. The reaction followed is first and third order with respect to Fe²⁺ and 1,10‐phenanthroline (phen)_T, respectively. Increasing the acid concentration retarded the reaction, and the reaction rate showed a positive salt effect. The rate‐limiting step involved the complexation of the phen or protonated phen with [Fe(phen)₂]²⁺ complex ion, leading to formation of [Fe(phen)₃]²⁺ ion. The observed retardation of the reaction rate with increasing [H⁺]₀ is due to the increased [phenH⁺]_eq and low reactivity of phenH⁺ with [Fe(phen)₂]²⁺ complex ion. Simulated curves for the acid variation experiments agreed well with the corresponding experimental curves and the estimated rate coefficients supporting the proposed mechanism. Relatively low energy of activation (26 kJ mol^?1) and high negative entropy of activation (?159.8 J K^?1 mol^?1) agree with the proposed mechanism and the formation of compact octahedral complex ion. © 2008 Wiley Periodicals, Inc. 40: 515–523, 2008     

Mechanistic Aspects of Ligand Substitution on the Hydroxopentaaquarhodium(III) Ion in Aqueous Solution by Sulfur‐Containing Bioactive Ligands

The kinetics of the interactions between three sulfur‐containing ligands, thioglycolic acid, 2‐thiouracil, glutathione, and the title complex, have been studied spectrophotometrically in aqueous medium as a function of the concentrations of the ligands, temperature, and pH at constant ionic strength. The reactions follow a two‐step process in which the first step is ligand‐dependent and the second step is ligand‐independent chelation. Rate constants (k₁ ～10^?3 s^?1 and k₂ ～10^?5 s^?1) and activation parameters (for thioglycolic acid: ΔH₁^≠ = 22.4 ± 3.0 kJ mol^?1, ΔS₁^≠ = ?220 ± 11 J K^?1 mol^?1, ΔH₂^≠ = 38.5 ± 1.3 kJ mol^?1, ΔS₂^≠ = ?204 ± 4 J K^?1 mol^?1; for 2‐thiouracil: ΔH₁^≠ = 42.2 ± 2.0 kJ mol^?1, ΔS₁^≠ = ?169 ± 6 J K^?1 mol^?1, ΔH₂^≠ = 66.1 ± 0.5 kJ mol^?1, ΔS₂^≠ = ?124 ± 2 J K^?1 mol^?1; for glutathione: ΔH₁^≠ = 47.2 ± 1.7 kJ mol^?1, ΔS₁^≠ = ?155 ± 5 J K^?1mol^?1, ΔH₂^≠ = 73.5 ± 1.1 kJ mol^?1, ΔS₂^≠ = ?105 ± 3 J K^?1 mol^?1) were calculated. Based on the kinetic and activation parameters, an associative interchange mechanism is proposed for the interaction processes. The products of the reactions have been characterized from IR and ESI mass spectroscopic analysis. A rate law involving the outer sphere association complex formation has been established as