Two‐Photon Absorption and Time‐Resolved Stimulated Emission Depletion Spectroscopy of a New Fluorenyl Derivative

The synthesis, comprehensive linear photophysical characterization, two‐photon absorption (2PA), steady‐state and time‐resolved stimulated emission depletion properties of a new fluorene derivative, (E)‐1‐(2‐(di‐p‐tolylamino)‐9,9‐diethyl‐9H‐fluoren‐7‐yl)‐3‐(thiophen‐2‐yl)prop‐2‐en‐1‐one ( 1 ), are reported. The primary linear spectral properties, including excitation anisotropy, fluorescence lifetimes, and photostability, were investigated in a number of aprotic solvents at room temperature. The degenerate 2PA spectra of 1 were obtained with open‐aperture Z‐scan and two‐photon induced fluorescence methods, using a 1 kHz femtosecond laser system, and maximum 2PA cross‐sections of ～400–600 GM were obtained. The nature of the electronic absorption processes in 1 was investigated by DFT‐based quantum chemical methods implemented in the Gaussian 09 program. The one‐ and two‐photon stimulated emission spectra of 1 were measured over a broad spectral range using a femtosecond pump–probe‐based fluorescence quenching technique, while a new methodology for time‐resolved fluorescence emission spectroscopy is proposed. An effective application of 1 in fluorescence bioimaging was demonstrated by means of one‐ and two‐photon fluorescence microscopy images of HCT 116 cells containing dye encapsulated micelles.     

Chiral J‐Aggregates of Atropo‐Enantiomeric Perylene Bisimides and Their Self‐Sorting Behavior

Herein we report on structural, morphological, and optical properties of homochiral and heterochiral J‐aggregates that were created by nucleation–elongation assembly of atropo‐enantiomerically pure and racemic perylene bisimides (PBIs), respectively. Our detailed studies with conformationally stable biphenoxy‐bridged chiral PBIs by UV/Vis absorption, circular dichroism (CD) spectroscopy, and atomic force microscopy (AFM) revealed structurally as well as spectroscopically quite different kinds of J‐aggregates for enantiomerically pure and racemic PBIs. AFM investigations showed that enantiopure PBIs form helical nanowires of unique diameter and large length‐to‐width ratio by self‐recognition, while racemic PBIs provide irregular‐sized particles by self‐discrimination of the enantiomers at the stage of nucleation. Steady‐state fluorescence spectroscopy studies revealed that the photoluminescence efficiency of homochiral J‐aggregated nanowires (47±3 %) is significantly higher than that of heterochiral J‐aggregated particle‐like aggregates (12±3 %), which is explained in terms of highly ordered molecular stacking in one‐dimensional nanowires of homochiral J‐aggregates. Our present results demonstrate the high impact of homochirality on the construction of well‐defined nanostructures with unique optical properties.     

Excited‐state energy dynamics of conjugated polycarbogermane oligomers: Introduction effects of germanium atom into π‐conjugated molecular system

Excited‐state energy dynamics of the conjugated polycarbogermane oligomers, poly{[1,4‐bis(thiophenyl)buta‐1,3‐diyne]‐alt‐(dimethylgermane)} (PBTBD‐DMG; n = 33), poly{[1,4‐bis‐(thiophenyl)buta‐1,3‐diyne]‐alt‐(diphethylgermane)} (PBTBD‐DPG; n = 12), poly{[1,4‐bis(phenyl)buta‐1,3‐diyne]‐alt‐(dimethylgermane)} (PBPBD‐DMG; n = 36), and poly{[1,4‐bis(phenyl)buta‐1,3‐diyne]‐alt‐(diphenylgermane)} (PBPBD‐DPG; n = 2), were investigated by steady‐state and picosecond time‐resolved fluorescence spectroscopies in liquid solution. The introduction effect of a germanium atom into π‐conjugated oligomer backbones and the substitution effect of a methyl or phenyl group on the germanium atom are discussed from solvent polarity‐dependent studies. Steady‐state and time‐resolved fluorescence studies on the thiophene‐containing polycarbogermane (PBTBD‐DMG and PBTBD‐DPG) oligomers revealed considerable solvent polarity‐dependent characteristics, whereas those of the phenylene‐containing polycarbogermane (PBPBD‐DMG and PBPBD‐DPG) oligomers do not significantly show such characteristics. As the solvent polarity increased from n‐hexane to tetrahydrofuran, the steady‐state fluorescence spectra of PBTBD‐DMG and PBTBD‐DPG oligomers were significantly redshifted, and their fluorescence lifetimes seemed to change from ～624 to ～46 ps. These results suggest that the excited‐state dynamics of PBTBD‐DMG and PBTBD‐DPG oligomers are related to an intramolecular charge transfer (ICT) emission process through (d‐p) π conjugation between the π‐conjugated system and unoccupied 4d orbitals of the germanium atom. These results are supported by quantum chemical (AM1 and CNDO/2) calculations. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1298–1306, 2002     

ROFRET: A Molecular‐Scale Fluorescent Probe Displaying Viscosity‐Enhanced Intramolecular Förster Energy Transfer

The fluorescent probe ROFRET contains a Bodipy molecular rotor connected through a short triazole‐based spacer to a fully alkylated Bodipy. Förster resonance energy transfer takes place from the rotor to the other Bodipy, and is enhanced to a limiting value as the viscosity of the solvent increases. Time‐resolved spectroscopy and steady‐state studies are consistent with both forward and reverse energy transfer, and delayed fluorescence.     

Surface‐State‐Mediated Charge‐Transfer Dynamics in CdTe/CdSe Core–Shell Quantum Dots

Herein, we report the synthesis of aqueous CdTe/CdSe type‐II core–shell quantum dots (QDs) in which 3‐mercaptopropionic acid is used as the capping agent. The CdTe QDs and CdTe/CdSe core–shell QDs are characterized by X‐ray diffraction (XRD), high‐resolution transmission electron microscopy (HR‐TEM), steady‐state absorption, and emission spectroscopy. A red shift in the steady‐state absorption and emission bands is observed with increasing CdSe shell thickness over CdTe QDs. The XRD pattern indicates that the peaks are shifted to higher angles after growth of the CdSe shell on the CdTe QDs. HR‐TEM images of both CdTe and CdTe/CdSe QDs indicate that the particles are spherical, with a good shape homogeneity, and that the particle size increases by about 2 nm after shell formation. In the time‐resolved emission studies, we observe that the average emission lifetime (τ_av) increases to 23.5 ns for CdTe/CdSe (for the thickest shell) as compared to CdTe QDs (τ_av=12 ns). The twofold increment in the average emission lifetime indicates an efficient charge separation in type‐II CdTe/CdSe core–shell QDs. Transient absorption studies suggest that both the carrier cooling and the charge‐transfer dynamics are affected by the presence of traps in the CdTe QDs and CdTe/CdSe core–shell QDs. Carrier quenching experiments indicate that hole traps strongly affect the carrier cooling dynamics in CdTe/CdSe core–shell QDs.     

Structure‐Dependent Electronic Nature of Star‐Shaped Oligothiophenes,Probed by Ensemble and Single‐Molecule Spectroscopy

We have investigated the photophysical properties of star‐shaped oligothiophenes with three terthiophene arms (meta to each other, S3 ) or six terthiophene arms (ortho‐, meta‐, and para‐arranged, S6 ) connected to an ethynylbenzene core to elucidate the relationship between their molecular structure and electronic properties by using a combination of ensemble and single‐molecule spectroscopic techniques. We postulate two different conformations for molecules S3 and S6 on the basis of the X‐ray structure of hexakis(5‐hexyl‐2‐thienlyethynyl)benzene and suggest the coexistence of these conformers by using spectroscopic methods. From the steady‐state spectroscopic data of compound S6 , we show that the exciton is delocalized over the core structure, but that the meta‐linkage in compound S3 prevents the electronic communication between the arms. However, in single‐molecule spectroscopic measurements, we observed that some molecules of compound S3 showed long fluorescence lifetimes (about 1.4 ns) in the fluorescence‐intensity trajectories, which indicated that π electrons were delocalized along the meta linker. Based on these observations, we suggest that the delocalized exciton is intensely sensitive towards the dihedral angle between the core and the adjacent thiophene ring, as well as to the substituted position of the terthiophene arms. Our results highlight that the fluorescence lifetimes of compounds S3 and S6 are strongly correlated with the spatial location of their excitons, which is mainly affected by their conformation, that is, whether the innermost thiophene rings are facing each other or not. More interestingly, we observed that the difference between the degrees of ring‐torsional flexibility of compounds S3 and S6 results in their sharply contrasting fluorescence properties, such as a change in fluorescence intensity as a function of temperature.     

Templating the Self‐Assembly of Pristine Carbon Nanostructures in Water

The low solubility of carbon nanostructures (CNs) in water and the need of ordered architectures at the nanoscale level are two major challenges for materials chemistry. Here we report that a novel amino acid based low‐molecular‐weight gelator (LMWG) can be used to effectively disperse pristine CNs in water and to drive their ordered self‐assembly into supramolecular hydrogels. A non‐covalent mechanochemical approach has been used, so the π‐extended system of the CNs remains intact. Optical spectroscopy and electron microscopy confirmed the effective dispersion of the CNs in water. Electron microscopy of the hydrogels showed the formation of an ordered, LMWG‐assisted, self‐assembled architecture. Moreover, the very same strategy allows the solubilization and self‐assembly in water of a variety of hydrophobic molecules.     

Polyelectrolyte‐Assisted Noncovalent Functionalization of Carbon Nanotubes with Ordered Self‐Assemblies of a Water‐Soluble Porphyrin

The self‐assembly and induced supramolecular chirality of meso‐tetrakis(4‐sulfonatophenyl)porphyrin (TSPP) on both single‐wall (SWCNT) and multiwall carbon nanotubes (MWCNT) are investigated. Under mild pH conditions (pH 3), TSPP forms aggregates when CNTs are dispersed in an aqueous solution containing positively charged polyelectrolytes such as poly‐L ‐lysine (PLL) or poly(allylamine hydrochloride) (PAH). Evidence for the geometry of the porphyrin aggregates is obtained from absorption spectra, whereby the fingerprints of J‐ and H‐aggregates are clearly seen only in the presence of smaller‐diameter nanotubes. J‐aggregates are better stabilized with PLL, whereas in the presence of PAH mainly H‐aggregates prevail. Excited‐state interactions within these nanohybrids are studied by steady‐state and time‐resolved fluorescence. The porphyrin emission intensity in the nanohybrid solution is significantly quenched compared to that of TSPP alone, and this implies strong electronic interaction between CNTs and porphyrin molecules. Fluorescence lifetime imaging microscopy (FLIM) further supports that porphyrin arrays are associated with the MWCNT sidewalls wrapped in PLL. In the case of the SWCNT hybrid, spherical structures associated with longer fluorescence lifetime appeared after one week, indicative of H‐aggregates of TSPP. The latter are the result of π–π stacking of porphyrin units on neighboring nanotubes facilitated by the strong tendency of these nanotubes to interact with each other. These results highlight the importance of optimum dimensions and surface‐area architectures of CNTs in the control/stability of the porphyrin aggregates with promising properties for light harvesting.     

Low‐Threshold Wavelength‐Switchable Organic Nanowire Lasers Based on Excited‐State Intramolecular Proton Transfer

Coherent light signals generated at the nanoscale are crucial to the realization of photonic integrated circuits. Self‐assembled nanowires from organic dyes can provide both a gain medium and an effective resonant cavity, which have been utilized for fulfilling miniaturized lasers. Excited‐state intramolecular proton transfer (ESIPT), a classical molecular photoisomerization process, can be used to build a typical four‐level system, which is more favorable for population inversion. Low‐power driven lasing in proton‐transfer molecular nanowires with an optimized ESIPT energy‐level process has been achieved. With high gain and low loss from the ESIPT, the wires can be applied as effective FP‐type resonators, which generated single‐mode lasing with a very low threshold. The lasing wavelength can be reversibly switched based on a conformation conversion of the excited keto form in the ESIPT process.     

A mechanistic investigation of a three‐component radical photoinitiator system comprising methylene blue,N‐methyldiethanolamine,and diphenyliodonium chloride

Three‐component systems, which contain a light‐absorbing species (typically a dye), an electron donor (typically an amine), and a third component (usually an iodonium salt), have emerged as efficient, visible‐light‐sensitive photoinitiators. Although three‐component systems have been consistently found to be faster and more efficient than their two‐component counterparts, these systems are not well understood and a number of distinct mechanisms have been reported in the literature. In this contribution, photodifferential scanning calorimetry and in situ, time‐resolved, laser‐induced, steady‐state fluorescence spectroscopy were used to study the initiation mechanism of the three‐component system methylene blue, N‐methyldiethanolamine and diphenyliodonium chloride. Kinetic studies based upon photodifferential scanning calorimetry reveal a significant increase in polymerization rate with increasing concentration of either the amine or the iodonium salt. However, the laser‐induced fluorescence experiments show that while increasing the amine concentration dramatically increases the rate of dye fluorescence decay, increasing the DPI concentration actually slows consumption of the dye. We concluded that the primary photochemical reaction involves electron transfer from the amine to the dye. We suggest that the iodonium salt reacts with the resulting dye‐based radical (which is active only for termination) to regenerate the original dye and simultaneously produce a phenyl radical (active in initiation) derived from the diphenyliodonium salt. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2057–2066, 2000     

Temperature response of aqueous solutions of pyrene end‐labeled poly(N‐isopropylacrylamide)s probed by steady‐state and time‐resolved fluorescence

Aqueous solutions of a series of monodisperse poly(N‐isopropylacrylamide)s end‐labeled with n‐butyl‐1‐pyrene at one or both chain ends (Py_n‐PNIPAMs with n = 1 or 2) were studied by turbidimetry, light scattering, and fluorescence. For a given polymer concentration and heating rate, the cloud point (T_c) of an aqueous Py_n‐PNIPAM solution, determined by turbidimetry, was found to increase with the number‐average molecular weight (M_n) of the polymer. The steady‐state fluorescence spectra and time‐resolved fluorescence decays of Py_n‐PNIPAM aqueous solutions were analyzed and all parameters retrieved from these analyses were found to be affected as the solution temperature passed through T_c, the solution cloud point, and T_m, the temperature where dehydration of PNIPAM occurred. The trends obtained by fluorescence to characterize the aqueous Py_n‐PNIPAM solutions as a function of temperature were found to be consistent with the model proposed for telechelic PNIPAM by Koga et al. in 2006. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 308–318     

Efficient synthesis of ionic triblock copolyesters and facile access to charge‐reversal hybrid micelles

Novel carboxyl‐ and amino‐functionalized copolyesters, based on poly(ε‐caprolactone)‐block‐poly(butylene fumarate)‐block‐poly(ε‐caprolactone), were efficiently synthesized via Michael‐type thiol‐ene click chemistry. The resulting amphiphilic copolyesters with controllable molecular weights and abundant positively or negatively charged groups could spontaneously form pH‐sensitive micelles in aqueous solutions, as confirmed by transmission electron microscopy, dynamic light scattering, fluorescence probing technique, and zeta potential analyses. Importantly, charge‐reversal hybrid micelles can be obtained by co‐assembly of carboxyl‐ and amino‐functionalized copolyesters. The surface charges of hybrid micelles reversed rapidly from negative to positive at isoelectric point via protonation of surface carboxyl and amino groups. Interestingly, the hybrid micelles showed apparent pH‐triggered Nile red‐release behavior in acidic condition resembling tumor intracellular environment, which is fairly desirable for drug delivery. Our work indicates that co‐assembly is a facile but efficient way to prepare charge‐reversal micelles, which have great potential to be used as intelligent drug delivery systems for cancer therapy. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1259–1267     

Synthesis and characterization of fluorescence end‐labeled polystyrene via reversible addition‐fragmentation chain transfer (RAFT) polymerization

Fluorescence end‐labeled polystyrene (PS) with heteroaromatic carbazole or indole group were prepared conveniently via reversible addition‐fragmentation chain transfer (RAFT) polymerization using dithiocarbamates, ethyl 2‐(9H‐carbazole‐9‐carbonothioylthio)propanoate (ECCP) and benzyl 2‐phenyl‐1H‐indole‐1‐carbodithioate (BPIC) as RAFT agents. The end functionality of obtained PS with different molecular weights was high. The steady‐state and the time‐resolved fluorescence techniques had been used to study the fluorescence behaviors of obtained end‐labeled PS. The fluorescence of dithiocarbamates resulting PS in solid powder cannot be monitored; however, they exhibited structured absorptions and emissions in solvent DMF and the fluorescence lifetimes of PS had no obvious change with molecular weights increasing. These observations suggested that the polymer chains were possibly stretched adequately in DMF, that is, the fluorescence end group was exposed into solvent molecules and little quenching of excited state occurred upon incorporation into polymer chain. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6198–6205, 2008     

Monofluorination and Trifluoromethylation of BODIPY Dyes for Prolonged Single‐Molecule Detection

Electrophilic monofluorination with Selectfluor and nucleophilic trifluoromethylation with the Ruppert–Prakesh reagent of dimethyl‐, tetramethyl‐ and pentamethyl‐substituted boron dipyrromethenes (BODIPY) are investigated. Monofluorinated dyes are synthesized with low yields (<30 %), however trifluoromethyl derivatives are obtained in moderate to high yields (≈40–90 %). All compounds are characterized by steady‐state and time‐resolved fluorescence spectroscopy, the photostability is investigated with fluorescence correlation spectroscopy (FCS) and total internal reflection fluorescence microscopy (TIRF). Monofluorination hardly affects the spectroscopic parameters of the unsubstituted parent compounds, but distinctly enhances the photostability, whereas trifluoromethylation leads to a hypsochromic shift by up to 17 nm in both absorption and emission, slightly enhanced intersystem crossing, and higher photostability. Further development of soft fluorination and trifluoromethylation methods is therefore highly desired.     

Proton‐Transfer Reactions of Acridine in Water‐Containing Ionic‐Liquid‐Rich Mixtures

To assess the potential of ionic liquids (ILs) as a solubilizing media that facilitates proton‐transfer reactions, acridine prototropism is investigated using UV/Vis molecular absorbance as well as steady‐state and time‐resolved fluorescence with different ILs in the presence of a small amount of dilute acid or base. It is found that protonation and deprotonation of acridine, when dissolved in different ILs, can be triggered by the addition of a small amount of dilute aqueous HCl and NaOH, respectively, in both the ground and excited states, irrespective of the identity of the IL. However, the amount of dilute acid/base needed to protonate/deprotonate acridine dissolved in different ILs is found to vary from one IL to another. Steady‐state fluorescence measurements also imply the presence of interactions between the acidic proton(s) of IL cation and excited acridine. The interconversion of neutral and protonated acridine, as well as the presence of a weakly fluorescent complex between excited acridine and the acidic proton(s) of the IL cation, is further corroborated by the parameters recovered from the fitting of the excited‐state intensity‐decay data. It is established that ILs as solubilizing media readily support facile proton transfer in both ground and excited states.     

Control of molecular aggregation in symmetrically substituted π‐conjugated bulky poly(p‐phenylenevinylene)s and their copolymers

A new series of symmetrically substituted bulky PPV‐copolymers based on poly(bis‐2,5‐(2‐ethylhexyloxy)‐1,4‐phenylenevinylene) ( BEH‐PPV ) bearing tricyclodecane (TCD) pendants were synthesized to study the effect of chain aggregation in the π‐conjugated polymer backbone. The composition of the copolymers was varied up to 100 mol % and the structures of the copolymer were confirmed by NMR and FTIR. The molecular weights of the copolymers were obtained as M_w = 11,500–1,78,800 depending on the TCD‐incorporation in BEH‐PPV. The origin of the π‐aggregation was investigated using mixture of solvents (polar or nonpolar) or temperature as external stimuli. Absorption, photoluminescence, and time‐resolved fluorescence decay techniques were employed as tools to trace molecular aggregation in solution and solid state. The TCD‐substituted bulky copolymers showed almost twice the enhancement in photoluminescence compared with that of BEH‐PPV . Solvent‐induced aggregation studies of copolymers revealed the existence of strong molecular aggregation in BEH‐PPV compared with that of bulky copolymers. Variable temperature studies further evidence for the reversibility of molecular aggregation on heating/cooling cycles and showed isosbetic points with respect to free and aggregated polymer chains. Time‐resolved fluorescent studies confirmed the existence of free and aggregated π‐conjugated species with a life time of 0.1 to 1.0 ns. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2631–2646, 2009     

A mechanistic investigation of the three‐component radical photoinitiator system Eosin Y spirit soluble,N‐methyldiethanolamine,and diphenyliodonium chloride

Photo‐DSC and in situ, time‐resolved, laser‐induced, steady‐state fluorescence spectroscopy were used to study the initiation mechanism of the three‐component system: Eosin Y spirit soluble (EYss), N‐methyldiethanolamine, and diphenyliodonium chloride. Kinetic studies based on photo‐DSC revealed that the fastest polymerization occurred when all three components were present (the next fastest was with the dye/amine pair, and the slowest was with the dye/iodonium pair). However, the laser‐induced fluorescence experiments showed that the pairwise reaction between the eosin and iodonium bleaches the dye much more rapidly than does the reaction between the eosin and amine. We concluded that although a direct eosin/amine reaction can produce active radicals in the three‐component system, this reaction is largely overshadowed by the eosin/iodonium reaction, which does not produce active radicals as effectively. We proposed that the amine reduces the oxidized dye radical formed in the eosin/iodonium reaction back to its original state as well as the simultaneous production of an active initiating amine‐based radical. Because of the difference in the pairwise reaction rates for eosin/amine and eosin/iodonium, it is likely that this regeneration reaction was the primary source of active radicals in the three‐component eosin/amine/iodonium system. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 715–723, 2001     

Contrasting Response of Two Dipolar Fluorescence Probes in a Leucine‐Based Organogel and Its Implications

The microenvironments of a leucine‐based organogel are probed by monitoring the fluorescence behavior of coumarin 153 (C153) and 4‐aminophthalimide (AP). The steady‐state data reveals distinctly different locations of the two molecules in the gel. Whereas AP resides close to the hydroxyl moieties of the gelator and engages in hydrogen‐bonding interactions, C153 is found in bulk‐toluene‐like regions. In contrast to C153, AP exhibits excitation‐wavelength‐dependent emission, indicating that the environments of the hydrogen‐bonded AP molecules are not all identical. A two‐component fluorescence decay of AP in gel, unlike C153, supports this model. A time‐resolved fluorescence anisotropy study of the rotational motion of the molecules also reveals the strong association of only AP with the gelator. That AP influences the critical gelation concentration implies its direct involvement in the gel‐formation process. The results highlight the importance of guest–gelator interactions in gels containing guest molecules.     

Photophysics,Excited‐state Double‐Proton Transfer and Hydrogen‐bonding Properties of 5‐Deazaalloxazines

The photophysical properties of 5‐deazaalloxazine and 1,3‐dimethyl‐5‐deazaalloxazine were studied in different solvents. These compounds have higher values of fluorescence quantum yields and longer fluorescence lifetimes, compared to those obtained for their alloxazine analogs. Electronic structure and S₀–S_i transitions were investigated using the ab initio methods [MP2, CIS(D), EOM‐CCSD] with the correlation‐consistent basis sets. Also the time‐dependent density functional theory (TD‐DFT) has been employed. The lowest singlet excited states of 5‐deazaalloxazine and 1,3‐dimethyl‐5‐deazaalloxazine are predicted to have the π, π* character, whereas similar alloxazines have two close‐lying π, π* and n, π* transitions. Experimental steady‐state and time‐resolved spectral studies indicate formation of an isoalloxazinic excited state via excited‐state double‐proton transfer (ESDPT) catalyzed by an acetic acid molecule that forms a hydrogen bond complex with the 5‐deazaalloxazine molecule. Solvatochromism of both 5‐deazaalloxazine and its 1,3‐dimethyl substituted derivative was analyzed using the Kamlet–Taft scale and four‐parameter Catalán solvent scale. The most significant result of our studies is that the both scales show a strong influence of solvent acidity (hydrogen bond donating ability) on the emission properties of these compounds, indicating the importance of intermolecular solute–solvent hydrogen‐bonding interactions in their excited state.     

Folding‐Induced Modulation of Excited‐State Dynamics in an Oligophenylene–Ethynylene‐Tethered Spiral Perylene Bisimide Aggregate

The excited‐state photophysical behavior of a spiral perylene bisimide (PBI) folda‐octamer ( F8 ) tethered to an oligophenylene–ethynylene scaffold is comprehensively investigated. Solvent‐dependent UV/Vis and fluorescence studies reveal that the degree of folding in this foldamer is extremely sensitive to the solvent, thus giving rise to an extended conformation in CHCl₃ and a folded helical aggregate in methylcyclohexane (MCH). The exciton‐deactivation dynamics are largely governed by the supramolecular structure of F8 . Femtosecond transient absorption (TA) in the near‐infrared region indicates a photoinduced electron‐transfer process from the backbone to the PBI core in the extended conformation, whereas excitation power‐ and polarization‐dependent TA measurements combined with computational modeling showed that excitation energy transfer between the unit PBI chromophores is the major deactivation pathway in the folded counterpart.