Lithographic Deposition of Patterned Metal–Organic Framework Coatings Using a Photobase Generator

A photobase generator was used to induce metal–organic framework (MOF) nucleation upon UV irradiation. This method was further developed into a simple, one‐step method for depositing patterned MOF films. Furthermore, the ability of our method to coat a single substrate with MOF films having different chemical compositions is illustrated. The method is an important step towards integrating MOF deposition with existing lithographic techniques and the incorporation of these materials into sensors and other electronic devices.     

pH‐Dependent Proton Conducting Behavior in a Metal–Organic Framework Material

A porous metal–organic framework (MOF), [Ni₂(dobdc)(H₂O)₂]?6 H₂O (Ni₂(dobdc) or Ni‐MOF‐74; dobdc^4?=2,5‐dioxido‐1,4‐benzenedicarboxylate) with hexagonal channels was synthesized using a microwave‐assisted solvothermal reaction. Soaking Ni₂(dobdc) in sulfuric acid solutions at different pH values afforded new proton‐conducting frameworks, H⁺@Ni₂(dobdc). At pH 1.8, the acidified MOF shows proton conductivity of 2.2×10^?2 S cm^?1 at 80 °C and 95 % relative humidity (RH), approaching the highest values reported for MOFs. Proton conduction occurs via the Grotthuss mechanism with a significantly low activation energy as compared to other proton‐conducting MOFs. Protonated water clusters within the pores of H⁺@Ni₂(dobdc) play an important role in the conduction process.     

Photoinduced Postsynthetic Polymerization of a Metal–Organic Framework toward a Flexible Stand‐Alone Membrane

Metal–organic frameworks (MOFs) are a promising class of nanoporous polymeric materials. However, the processing of such fragile crystalline powders into desired shapes for further applications is often difficult. A photoinduced postsynthetic polymerization (PSP) strategy was now employed to covalently link MOF crystals by flexible polymer chains, thus endowing the MOF powders with processability and flexibility. Nanosized UiO‐66‐NH₂ was first functionalized with polymerizable functional groups, and its subsequent copolymerization with monomers was easily induced by UV light under solvent‐free and mild conditions. Because of the improved interaction between MOF particles and polymer chains, the resulting stand‐alone and elastic MOF‐based PSP‐derived membranes possess crack‐free and uniform structures and outstanding separation capabilities for Cr^VI ions from water.     

Highly Selective Water Adsorption in a Lanthanum Metal–Organic Framework

We present a new metal–organic framework (MOF) built from lanthanum and pyrazine‐2,5‐dicarboxylate (pyzdc) ions. This MOF, [La(pyzdc)_1.5(H₂O)₂] ? 2 H₂O, is microporous, with 1D channels that easily accommodate water molecules. Its framework is highly robust to dehydration/hydration cycles. Unusually for a MOF, it also features a high hydrothermal stability. This makes it an ideal candidate for air drying as well as for separating water/alcohol mixtures. The ability of the activated MOF to adsorb water selectively was evaluated by means of thermogravimetric analysis, powder and single‐crystal X‐ray diffraction and adsorption studies, indicating a maximum uptake of 1.2 mmol g^?1 MOF. These results are in agreement with the microporous structure, which permits only water molecules to enter the channels (alcohols, including methanol, are simply too large). Transient breakthrough simulations using water/methanol mixtures confirm that such mixtures can be separated cleanly using this new MOF.     

Encapsulation of a Porous Organic Cage into the Pores of a Metal–Organic Framework for Enhanced CO2 Separation

We present a facile approach to encapsulate functional porous organic cages (POCs) into a robust MOF by an incipient‐wetness impregnation method. Porous cucurbit[6]uril (CB6) cages with high CO₂ affinity were successfully encapsulated into the nanospace of Cr‐based MIL‐101 while retaining the crystal framework, morphology, and high stability of MIL‐101. The encapsulated CB6 amount is controllable. Importantly, as the CB6 molecule with intrinsic micropores is smaller than the inner mesopores of MIL‐101, more affinity sites for CO₂ are created in the resulting CB6@MIL‐101 composites, leading to enhanced CO₂ uptake capacity and CO₂/N₂, CO₂/CH₄ separation performance at low pressures. This POC@MOF encapsulation strategy provides a facile route to introduce functional POCs into stable MOFs for various potential applications.     

Flexible and Hierarchical Metal–Organic Framework Composites for High‐Performance Catalysis

The development of porous composite materials is of great significance for their potentially improved performance over those of individual components and extensive applications in separation, energy storage, and heterogeneous catalysis. Now mesoporous metal–organic frameworks (MOFs) with macroporous melamine foam (MF) have been integrated using a one‐pot process, generating a series of MOF/MF composite materials with preserved crystallinity, hierarchical porosity, and increased stability over that of melamine foam. The MOF nanocrystals were threaded by the melamine foam networks, resembling a ball‐and‐stick model overall. The resulting MOF/MF composite materials were employed as an effective heterogeneous catalyst for the epoxidation of cholesteryl esters. Combining the advantages of interpenetrative mesoporous and macroporous structures, the MOF/melamine foam composite has higher dispersibility and more accessibility of catalytic sites, exhibiting excellent catalytic performance.     

Evidence of Photoinduced Charge Separation in the Metal–Organic Framework MIL‐125(Ti)‐NH2

Herein, we describe the photochemical behavior of the porous metal–organic framework MIL‐125(Ti)‐NH₂, built up from cyclic Ti₈O₈(OH)₄ oxoclusters and 2‐aminoterephthalate ligands. While MIL‐125(Ti)‐NH₂ does not emit upon excitation at 420 nm, laser flash photolyses of dry samples (diffuse reflectance) or aqueous suspensions (transmission) of the solid have allowed detecting a transient characterized by a continuous absorption from 390 to 820 nm decaying in the sub‐millisecond timescale, which is quenched by oxygen. This transient has been attributed to the charge‐separation state. Firm evidence for this assignment was obtained by lamp irradiation of aqueous suspensions of MIL‐125(Ti)‐NH₂ in the presence of electron‐donor (N,N,N′N′‐tetramethyl‐p‐phenylenediamine) or electron‐acceptor (methylviologen) probe molecules, which has allowed the visual detection of the corresponding radical ions, in agreement with the occurrence of photoinduced charge separation in MIL‐125(Ti)‐NH₂.     

Well‐Defined Metal–Organic Framework Hollow Nanocages

Metal–organic frameworks (MOFs) have demonstrated great potentials in a variety of important applications. To enhance the inherent properties and endow materials with multifunctionality, the rational design and synthesis of MOFs with nanoscale porosity and hollow feature is highly desired and remains a great challenge. In this work, the formation of a series of well‐defined MOF (MOF‐5, Fe^II‐MOF‐5, Fe^III‐MOF‐5) hollow nanocages by a facile solvothermal method, without any additional supporting template is reported. A surface‐energy‐driven mechanism may be responsible for the formation of hollow nanocages. The addition of pre‐synthesized poly(vinylpyrrolidone)‐ (PVP) capped noble‐metal nanoparticles into the synthetic system of MOF hollow nanocages yields the yolk–shell noble metal@MOF nanostructures. The present strategy to fabricate hollow and yolk–shell nanostructures is expected to open up exciting opportunities for developing a novel class of inorganic–organic hybrid functional nanomaterials.     

Switchable Surface Hydrophobicity–Hydrophilicity of a Metal–Organic Framework

Materials with surfaces that can be switched from high/superhydrophobicity to superhydrophilicity are useful for myriad applications. Herein, we report a metal–organic framework (MOF) assembled from Zn^II ions, 1,4‐benzenedicarboxylate, and a hydrophobic carborane‐based linker. The MOF crystal‐surface can be switched between hydrophobic and superhydrophilic through a chemical treatment to remove some of the building blocks.     

Dynamic Calcium Metal–Organic Framework Acts as a Selective Organic Solvent Sponge

Herein, we present a Ca‐based metal–organic framework named AEPF‐1, which is an active and selective catalyst in olefin hydrogenation reactions. AEPF‐1 exhibits a phase transition upon desorption of guest molecules. This structural transformation takes place by a crystal to crystal transformation accompanied by the loss of single‐crystal integrity. Powder diffraction methods and computational studies were applied to determine the structure of the guest‐free phase. This work also presents data on the exceptional adsorption behavior of this material, which is shown to be capable of separating polar from nonpolar organic solvents, and is a good candidate for selective solvent adsorption under mild conditions.     

Morphological and Structural Evolutions of Metal–Organic Framework Particles from Amorphous Spheres to Crystalline Hexagonal Rods

Compositions as well as morphologies and structures of particles are vital factors that define their properties and applications. However, the morphology and structure changes associated with the composition change of metal–organic frameworks (MOFs) are barely studied. Herein, we report the morphology and structure changes of MOF particles associated with the ratio of two organic linkers incorporated within MOF particles, when they are constructed from the reactions of In(NO₃)₃ in the presence of isophthalic acid (H₂IPA) and/or 1,4‐benzenedicarboxylic acid (H₂BDC). Two tendencies—the tendency of BDC and In³⁺ to form porous crystalline hexagonal rods, and the tendency of IPA and In³⁺ to form non‐porous amorphous spherical particles—compete during the formation of MOF particles. Eventually, the incorporated ratio of BDC and IPA within the MOF particles, and thus their morphology and porosity, are controlled by altering the relative amounts of H₂BDC and H₂IPA used during the reactions.     

N‐Doped Carbon Aerogel Derived from a Metal–Organic Framework Foam as an Efficient Electrocatalyst for Oxygen Reduction

Metal–organic frameworks (MOFs) are promising alternative precursors for the fabrication of heteroatom‐doped carbon materials for energy storage and conversion. However, the direct pyrolysis of bulk MOFs usually gives microporous carbonaceous materials, which significantly hinder the mass transportation and the accessibility of active sites. Herein, N‐doped carbon aerogels with hierarchical micro‐, meso‐, and macropores were fabricated through one‐step pyrolysis of zeolitic imidazolate framework‐8/carboxymethylcellulose composite gel. Owing to the hierarchical porosity, high specific surface area, favorable conductivity, excellent thermal and chemical stability, the as‐prepared N‐doped carbon aerogel exhibits excellent oxygen reduction reaction (ORR) activity, long‐term durability, and good methanol tolerance in alkaline medium. This work thus provides a new way to fabricate new types of MOF‐derived carbon aerogels for various applications.     

Metal–Organic Frameworks for Oxygen Storage

We present a systematic study of metal–organic frameworks (MOFs) for the storage of oxygen. The study starts with grand canonical Monte Carlo simulations on a suite of 10 000 MOFs for the adsorption of oxygen. From these data, the MOFs were down selected to the prime candidates of HKUST‐1 (Cu‐BTC) and NU‐125, both with coordinatively unsaturated Cu sites. Oxygen isotherms up to 30 bar were measured at multiple temperatures to determine the isosteric heat of adsorption for oxygen on each MOF by fitting to a Toth isotherm model. High pressure (up to 140 bar) oxygen isotherms were measured for HKUST‐1 and NU‐125 to determine the working capacity of each MOF. Compared to the zeolite NaX and Norit activated carbon, NU‐125 has an increased excess capacity for oxygen of 237 % and 98 %, respectively. These materials could ultimately prove useful for oxygen storage in medical, military, and aerospace applications.     

A Titanium Metal–Organic Framework with Visible‐Light‐Responsive Photocatalytic Activity

The one‐step synthesis and characterization of a new and robust titanium‐based metal–organic framework, ACM‐1 , is reported. In this structure, which is based on infinite Ti?O chains and 4,4′,4′′,4′′′‐(pyrene‐1,3,6,8‐tetrayl) tetrabenzoic acid as a photosensitizer ligand, the combination of highly mobile photogenerated electrons and a strong hole localization at the organic linker results in large charge‐separation lifetimes. The suitable energies for band gap and conduction band minimum (CBM) offer great potential for a wide range of photocatalytic reactions, from hydrogen evolution to the selective oxidation of organic substrates.     

Mechanochemical Immobilisation of Metathesis Catalysts in a Metal–Organic Framework

A simple, one‐step mechanochemical procedure for immobilisation of homogeneous metathesis catalysts in metal–organic frameworks was developed. Grinding MIL‐101‐NH₂(Al) with a Hoveyda–Grubbs second‐generation catalyst resulted in a heterogeneous catalyst that is active for metathesis and one of the most stable immobilised metathesis catalysts. During the mechanochemical immobilisation the MIL‐101‐NH₂(Al) structure was partially converted to MIL‐53‐NH₂(Al). The Hoveyda–Grubbs catalyst entrapped in MIL‐101‐NH₂(Al) is responsible for the observed catalytic activity. The developed synthetic procedure was also successful for the immobilisation of a Zhan catalyst.     

2D Semiconducting Metal–Organic Framework Thin Films for Organic Spin Valves

2D conductive metal–organic frameworks (2D c‐MOFs) feature promising applications as chemiresistive sensors, electrode materials, electrocatalysts, and electronic devices. However, exploration of the spin‐polarized transport in this emerging materials and development of the relevant spintronics have not yet been implemented. In this work, layer‐by‐layer assembly was applied to fabricate highly crystalline and oriented thin films of a 2D c‐MOF, Cu₃(HHTP)₂, (HHTP: 2,3,6,7,10,11‐hexahydroxytriphenylene), with tunable thicknesses on the La_0.67Sr_0.33MnO₃ (LSMO) ferromagnetic electrode. The magnetoresistance (MR) of the LSMO/Cu₃(HHTP)₂/Co organic spin valves (OSVs) reaches up to 25 % at 10 K. The MR can be retained with good film thickness adaptability varied from 30 to 100 nm and also at high temperatures (up to 200 K). This work demonstrates the first potential applications of 2D c‐MOFs in spintronics.     

A Flexible Photoactive Titanium Metal–Organic Framework Based on a [TiIV3(μ3‐O)(O)2(COO)6] Cluster

The synthesis of titanium–carboxylate metal–organic frameworks (MOFs) is hampered by the high reactivity of the commonly employed alkoxide precursors. Herein, we present an innovative approach to titanium‐based MOFs by the use of titanocene dichloride to synthesize COK‐69, the first breathing Ti MOF, which is built up from trans‐1,4‐cyclohexanedicarboxylate linkers and an unprecedented [Ti^IV₃(μ₃‐O)(O)₂(COO)₆] cluster. The photoactive properties of COK‐69 were investigated in depth by proton‐coupled electron‐transfer experiments, which revealed that up to one Ti^IV center per cluster can be photoreduced to Ti^III while preserving the structural integrity of the framework. The electronic structure of COK‐69 was determined by molecular modeling, and a band gap of 3.77 eV was found.