Electrochemical detection of receptor-mediated endocytosis by scanning electrochemical microscopy

We report a scanning electrochemical microscopy (SECM)-based receptor-mediated endocytosis detection method. Epidermal growth factor receptor (EGFR), which is one of the key membrane proteins associated with cancer, was used as a model for receptor-mediated endocytosis. EGFR molecules on the outer cell membrane were detected by SECM by using alkaline phosphatase (ALP) as a labeling enzyme. Since SECM detected the ALP activity on the outer membrane, the procedure helped discriminate the EGFR on the outer membrane from the intracellular EGFR involved in endocytosis. SECM showed a marked decrease in the current responses generated due to ALP activity by 93% on addition of the epidermal growth factor, indicating clearly that EGF triggered the endocytosis, which led to the withdrawal of most EGFRs from the outer membrane.     

Optimized water‐based ATRP of an anionic monomer: Comprehension and properties characterization

The effect of pH and the ligand nature over the atom transfer radical polymerization (ATRP) of the anionic monomer sodium 2‐acrylamido‐2‐methylpropanesulfonate (AMPSNa) was investigated in aqueous medium by using ω‐halogenated poly(ethylene oxide) and CuBr, as macroinitiator and catalyst, respectively. The stability of both catalytic complexes and macroinitiator was investigated in function of pH, that is, fixed between 7.5 and 12. UV‐VIS spectroscopy confirmed a good catalytic complex stability in the studied conditions. Hydrolysis of the macroinitiator ester group at pH higher than 7.5 was detected by ¹H NMR and GPC, yielding ill‐defined polymer samples when ATRP is performed in alkaline conditions. 2,2′‐Bipyridyl (Bpy), 1,1,4,7,10,10‐hexamethyltriethylenetetramine (HMTETA), and tris(2‐methylaminoethyl)amine (Me₆‐TREN)‐based complexes were compared at the optimal pH (pH 7.5). When polymerization was carried out in the presence of CuBr · 2Me₆‐TREN complex block copolymers with narrow molecular weight distribution (1.1 ≤ M _W/M _n ≤ 1.3), and good agreement between theoretical and experimental molar masses was obtained. Moreover, increasing the PAMPSNa polymerization degrees (n) did not affect the control over the polymerization. Preliminary characterization of the diblock copolymers behavior in aqueous medium revealed a strong polyelectrolyte effect independently of n. Interestingly, occurrence of interactions between the PEO and PAMPSNa‐blocks was also evidenced by differential scanning calorimetry and thermogravimetric analyses. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1108–1119, 2009     

Self‐Assembled Redox System for Bioelectrocatalytic Assay of L‐Ascorbylphosphate and Alkaline Phosphatase Activity

Ferrocene‐terminated self‐assembled monolayer (Fc‐SAM) on gold was used as an electron‐transfer mediator in the electrochemical assay of L ‐ascorbic acid 2‐phosphate (AAP). The assay is based on the enzymatic action of alkaline phosphatase (ALP), which triggers the release of vitamin C (L ‐ascorbic acid, AA) from AAP. The latter is easily oxidized on the Fc‐SAM under the diffusion limiting conditions that favors quantitative measurement of the AA concentration on a rotating disk electrode. We demonstrate the utility of the electrochemically active Fc‐SAM to probe the mechanism and to determine the kinetic parameters of an enzymatic reaction. The electrochemical technique was compared to a conventional spectrophotometric method of ALP activity detection using p‐nitrophenylphosphate (p‐NPP) as a substrate. We demonstrate that our new technique is also suitable for the analytical determination of ALP activity. The detection limits for both AAP and ALP were found to be 13 μM and 2 pM, respectively.     

扫描电化学显微镜在生物医学领域的应用研究进展

研究病变细胞和组织的异常表现可为理解重大疾病发生发展的病理机理和新型药物筛选提供重要参考.扫描电化学显微镜(Scanning electrochemical microscopy, SECM)是一种基于电化学原理的扫描探针显微镜,通过记录探针在样品表面扫描时的电流或电位等信息,对活细胞的形态和多种化学信息进行原位、实时...     

Electrochemical Monitoring of Saos‐2 Cell Differentiation on Pyrolytic Carbon Electrodes

In this study we establish an electrochemical platform based on two dimensional (2D) pyrolytic carbon electrodes for in vitro analysis of osteoblast differentiation. Electrochemical impedance spectroscopy (EIS) was used to monitor cell adhesion and proliferation, while an electrochemical assay based on square wave voltammetry (SWV) was applied to measure the activity of the differentiation marker alkaline phosphatase (ALP). 2D pyrolytic carbon electrodes were fabricated and used to monitor Saos‐2 cell differentiation for a period of up to 21 days. With this method it was possible to detect a faster increase of ALP activity for cells cultured in medium supplemented with differentiation factors compared to cells cultured in growth medium. This was confirmed by the results obtained with Alizarin Red staining, showing that cells subjected to osteogenic medium went through the entire differentiation process, from proliferation to mineralization. Finally, for the first time, real‐time monitoring of ALP activity combined with continuous EIS monitoring of the same cell culture was achieved using the pyrolytic carbon electrodes.     

Imaging Local Proton Fluxes through a Polycarbonate Membrane by Using Scanning Electrochemical Microscopy and Functionalized Alkanethiols

A new application of scanning electrochemical microscopy (SECM) to probe the transport of protons through membranes is described. Herein, a probe ultramicroelectrode (UME) is modified with a self‐assembled monolayer (SAM) of 11‐mercaptoundecanoic acid to qualitatively image areas within different pH regions above a track‐etched membrane. The current response of the modified electrode in the presence of potassium hexacyanoferrate as electroactive component is different in acidic and alkaline solutions. Depending on the pH value of the solution, the SAM‐covered electrode exposes either a neutral or a negatively charged insulating monolayer at pH 3 or 7, respectively, which leads to an increase/decrease in the faradaic current due to electrostatic interactions between the neutral/charged surface and the charged redox mediator. Therefore, local pH changes in the close vicinity of a membrane‐like substrate lead to different current responses recorded at the tip electrode when scanning above the surface.     

An Electrochemical Assay for Monitoring Differentiation of the Osteoblastic Cell Line (MBA‐15) on the Sensor Chip

An electrochemical assay for the indication of the activity of the cell bound differentiation marker alkaline phosphatase (ALP) is proposed using voltammetry on an in‐vitro cell culture. The basis of the assay is cultivation of cells on gold microelectrodes in wells of a microplate, catalytic hydrolysis of p‐aminophenyl phosphate by ALP and indication of p‐aminophenol oxidation by square wave voltammetry (SWV) with the sensors onto which the cells attached. The morphology of the bone marrow stromal cell line (MBA‐15) on the electrode surface was investigated and it exhibited in vitro osteogenic characteristics. Since ALP is expressed on the cell surface in early differentiation stage of osteoblastic cells, its activity was followed after different culture times over a period of 144 h by recording repetitive voltammograms at different time points upon addition of the substrate p‐aminophenyl phosphate. The ALP activity was estimated from the signal increase related to formation rate of p‐aminophenol and the number of cells. The highest value was measured at 120 h, when the cells reached confluence. The results of the electrochemical activity assay are consistent with the colorimetric acquired value from p‐nitrophenol formation rate.     

A Single‐Surface Electrochemical Biosensor for the Detection of DNA Triplet Repeat Expansion

Molecular diagnostics of inherited neurodegenerative disorders such as fragile X syndrome, myotonic dystrophy or Friedreich ataxia (FRDA) is based on analysis of the length of trinucleotide repetitive sequences in certain loci of genomic DNA. The current methods employ PCR and electrophoretic determination of the amplified DNA fragment size. We have recently shown that length of a triplet repetitive DNA sequence can be determined using a double‐surface electrochemical technique involving multiple hybridization of the expanded triplet repeat with short labeled reporter probe (spanning several trinucleotides). Here we propose a single‐surface sensor employing an analogous principle. Target DNA (tDNA) is adsorbed onto surface of a carbon (pyrolytic graphite or screen‐printed) electrode. Biotin‐labeled reporter probe (RP) is hybridized with the immobilized tDNA followed by binding of streptavidin‐alkaline phosphatase (ALP) conjugate. The ALP catalyzes production of an electroactive indicator (1‐naphthol) which is detected voltammetrically on the same electrode. Signal resulting from this electrochemical enzyme‐linked DNA hybridization assay is normalized to the amount of tDNA immobilized at the transducer surface either by measuring intrinsic tDNA voltammetric response, or using electrochemical labeling of the tDNA with osmium tetroxide 2,2′‐bipyridine complex. Detection of (GAA)_n?(TTC)_n triplet repeat expansion in nanogram quantities of PCR‐amplified tDNAs, including amplicons of patients' genomic DNA, is demonstrated. We show that our technique allow differentiation between normal and pathological alleles of X25 gene related to the FRDA.     

Fluorimetric determination of alkaline phosphatase in solid and fluid dairy products

A new assay has been developed for measuring residual alkaline phosphatase (ALP) activity in a wide variety of dairy products. The method proposed is simple, rapid and directly applicable to solid and liquid dairy samples. ALP in the test sample hydrolyzes a non fluorescent substrate, trifluoromethyl-β-umbelliferone phosphate, to its highly fluorescent phenolate product. The assay is performed in a reverse micellar medium composed of mixed buffer (2-amino-2-methyl-1-propanol buffer pH 9.0 and borate buffer pH 9.0) in AOT/isooctane, at a temperature of 38 °C. Total test time is 450 s. Reaction rates are linear (except for butter) up to 8.5 and 11% (v/v) raw milk, for whole milk and chocolate milk, respectively. The detection limits are 0.04, 0.4 and 0.22% (v/v) raw milk, for whole milk, chocolate milk and butter, respectively. The precision of the fluorimetric method was assessed by repeated analysis of a pasteurized milk sample spiked with mixed herd raw milk. The accuracy of the method was evaluated by comparison with an official colorimetric assay using p-nitrophenylphosphate as ALP substrate.     

Ex Situ Scanning Electrochemical Microscopy (SECM) Investigation of Bismuth‐ and Bismuth/Lead Alloy Film‐Modified Gold Electrodes in Alkaline Medium

Scanning electrochemical microscopy (SECM) in feedback mode was employed to characterise the reactivity and microscopic peculiarities of bismuth and bismuth/lead alloys plated onto gold disk substrates in 0.1 mol L^?1 NaOH solutions. Methyl viologen was used as redox mediator, while a platinum microelectrode was employed as the SECM tip. The metal films were electrodeposited ex situ from NaOH solutions containing either bismuth ions only or both bismuth and lead ions. Approach curves and SECM images indicated that the metal films were conductive and locally reactive with oxygen to provide Bi³⁺ and Pb²⁺ ions. The occurrence of the latter chemical reactions was verified by local anodic stripping voltammetry (ASV) at the substrate solution interface by using a mercury‐coated platinum SECM tip. The latter types of measurements allowed also verifying that lead was not uniformly distributed onto the bismuth film electrode substrate. These findings were confirmed by scanning electron microscopy images. The surface heterogeneity produced during the metal deposition process, however, did not affect the analytical performance of the bismuth coated gold electrode in anodic stripping voltammetry for the determination of lead in alkaline media, even in aerated aqueous solutions. Under the latter conditions, stripping peak currents proportional to lead concentration with a satisfactory reproducibility (within 5 % RSD) were obtained.     

Cytokine assay on a cellular chip by combining collagen gel embedded culture with scanning electrochemical microscopy

A novel cytokine assay has been designed using a cellular chip by combining a collagen gel embedded cell culture technique with scanning electrochemical microscopy-enzyme linked immunosorbent assay (SECM-ELISA). An array of cell-collagen gel mixture (2 μL) was spotted on an antibody-coated chip and incubated for 0.5-24 h. The very small trace amounts of cytokines produced by the activated leukocytes on the chip were effectively entrapped within the collagen gel matrix, and these were collected with the immobilized antibodies on the chip. The chip was further treated with horseradish peroxidase (HRP)-labeled antibodies via the sandwich method after removing the cell-collagen gel spots from the chip. Scanning electrochemical microscopy (SECM) was used to quantitatively evaluate the cytokines from the activated leukocytes produced on the chip, and the SECM images were obtained to visualize the position and concentration of IL-1β secreted from THP-1 and HL-60 cell lines at concentration levels of 10-350 pg mL⁻¹. Based on the chemiluminescence method, the sensitivity of the cytokine assay system in combination with SECM-ELISA is comparable to that of the marketed cytokine assay kit; further, the sample volume required for a single assay is drastically reduced.     

One‐step Electrodeposition of Tris(hydroxymethyl) Aminomethane – Prussian Blue on Screen‐printed Electrode for Highly Efficient Detection of Glycosylated Hemoglobin

In this work, the modified Prussian blue (PB) film showed more stable performance in alkaline solution by one‐step electrodepositon of PB with tris(hydroxymethyl) aminomethane (Tris) on screen‐printed electrode (SPE). The morphology and structure of the modified Tris‐PB/SPE was characterized by scanning electronic microscopy, infra spectroscopy, Raman spectroscopy and X‐ray diffraction. It was inferred that the Tris particles embedded in the PB deposit layer resulted in the change of PB structure and improve its stability in alkaline solution. And then, the modified Tris‐PB/SPE was applied in the detection of Glycosylated hemoglobin (HbA1c). The optimum experimental conditions are pH 7.5, 100 mV/s, 4 μL FAOD and 5 min reaction time. The linearship of HbA1c is i=22.90 C+101.9 in the range of 0.1–2 mmol/L. Comparing with PB/SPE, Tris‐PB/SPE shows better sensitivity and recovery.     

Scanning electrochemical microscopy imaging of rhodochrosite dissolution using gold amalgam microelectrodes

Gold/mercury amalgam (Au/Hg) microelectrodes with a diameter of 25 microm were developed for the detection of environmentally relevant analytes such as manganese and iron by scanning electrochemical microscopy (SECM), and applied to investigate the controlled dissolution of manganese carbonate (MnCO(3); rhodochrosite) in acidic conditions. Characterization of the amalgam electrode geometry via approach curves recorded during SECM experiments revealed Au/Hg microelectrodes with sphere cap geometry. Quantitative determination of Mn(2+) has been achieved by calibration of the Au/Hg microelectrode in bulk solution experiments. Subsequent SECM imaging experiments confirm the applicability of amalgam microelectrodes for imaging of Mn(2+) production during dissolution of MnCO(3) at pH 3.9. This study confirms feasibility and provides the fundamental basis of SECM imaging with amalgam microelectrodes to address biogeochemically relevant questions.     

Non‐destructive Patterning of Carbon Electrodes by Using the Direct Mode of Scanning Electrochemical Microscopy

Patterning of glassy carbon surfaces grafted with a layer of nitrophenyl moieties was achieved by using the direct mode of scanning electrochemical microscopy (SECM) to locally reduce the nitro groups to hydroxylamine and amino functionalities. SECM and atomic force microscopy (AFM) revealed that potentiostatic pulses applied to the working electrode lead to local destruction of the glassy carbon surface, most likely caused by etchants generated at the positioned SECM tip used as the counter electrode. By applying galvanostatic pulses, and thus, limiting the current during structuring, corrosion of the carbon surface was substantially suppressed. After galvanostatic patterning, unambiguous proof of the formation of the anticipated amino moieties was possible by modulation of the pH value during the feedback mode of SECM imaging. This patterning strategy is suitable for the further bio‐modification of microstructured surfaces. Alkaline phosphatase, as a model enzyme, was locally bound to the modified areas, thus showing that the technique can be used for the development of protein microarrays.     

An Activatable AIEgen Probe for High‐Fidelity Monitoring of Overexpressed Tumor Enzyme Activity and Its Application to Surgical Tumor Excision

Monitoring fluctuations in enzyme overexpression facilitates early tumor detection and excision. An AIEgen probe (DQM‐ALP) for the imaging of alkaline phosphatase (ALP) activity was synthesized. The probe consists of a quinoline‐malononitrile (QM) core decorated with hydrophilic phosphate groups as ALP‐recognition units. The rapid liberation of DQM‐OH aggregates in the presence of ALP resulted in aggregation‐induced fluorescence. The up‐regulation of ALP expression in tumor cells was imaged using DQM‐ALP. The probe permeated into 3D cervical and liver tumor spheroids for imaging spatially heterogeneous ALP activity with high spatial resolution on a two‐photon microscopy platform, providing the fluorescence‐guided recognition of sub‐millimeter tumorigenesis. DQM‐ALP enabled differentiation between tumor and normal tissue ex vivo and in vivo, suggesting that the probe may serve as a powerful tool to assist surgeons during tumor resection.     

Filming a live cell by scanning electrochemical microscopy: label-free imaging of the dynamic morphology in real time

ABSTRACT: The morphology of a live cell reflects the organization of the cytoskeleton and the healthy status of the cell. We established a label-free platform for monitoring the changing morphology of live cells in real time based on scanning electrochemical microscopy (SECM). The dynamic morphology of a live human bladder cancer cell (T24) was revealed by time-lapse SECM with dissolved oxygen in the medium solution as the redox mediator. Detailed local movements of cell membrane were presented by time-lapse cross section lines extracted from time-lapse SECM. Vivid dynamic morphology is presented by a movie made of time-lapse SECM images. The morphological change of the T24 cell by non-physiological temperature is in consistence with the morphological feature of early apoptosis. To obtain dynamic cellular morphology with other methods is difficult. The non-invasive nature of SECM combined with high resolution realized filming the movements of live cells.     

Visualization of the Local Catalytic Activity of Electrodeposited Pt–Ag Catalysts for Oxygen Reduction by means of SECM

Pt–Ag nanoparticle co‐deposits with different Pt–Ag ratios were prepared on a glassy carbon (GC) surface by pulsed electrodeposition and investigated for their catalytic activity in electrocatalytic oxygen reduction by using cyclic voltammetry (CV), rotating disc electrode (RDE) and scanning electrochemical microscopy (SECM) in 0.1 M phosphate buffer (pH 7.0). The atomic composition of the Pt–Ag co‐deposits was studied by means of energy‐dispersive X‐ray analysis (EDAX). In combination with X‐ray diffraction (XRD), the presence of partly alloyed Pt and Ag on the GC surface was confirmed. Scanning electron microscopy (SEM) images indicate that the prepared Pt–Ag catalyst particles are homogenously dispersed over the GC surface. Their size and morphology depend on their composition. The electrocatalytic activity of Pt–Ag deposits with high Pt content was the highest, exceeding even that of electrodeposited Pt as evaluated by quantitative RDE analysis. The redox competition mode of scanning electrochemical microscopy (RC‐SECM) was successfully used to visualize the local catalytic activity of the deposited Pt–Ag particles. Semi‐quantitative assessment of the SECM results confirmed the same order of activity of the different catalysts as the RDE investigations.     

Localized Deposition of Chitosan as Matrix for Enzyme Immobilization

A local electrodeposition method was developed for chitosan by exploiting a pH gradient between a macroscopic electrode (the support) and a much smaller counter electrode. The deposition was confined either by using the direct mode of scanning electrochemical microscopy (SECM) or by performing the deposition in channels of a microfluidic network. The roughness was characterized by noncontact scanning force microscopy. The availability of amino groups at the surface of the microstructures was visualized after labeling by confocal laser scanning microscopy. The enzyme glucose oxidase could be entrapped during the electrochemical deposition and showed activity as seen by SECM images.     

Fabrication and Use of Dual‐function Iridium Oxide Coated Gold SECM Tips. An Application to pH Monitoring above a Copper Electrode Surface during Nitrate Reduction.

The fabrication of a gold microelectrode modified with iridium oxide film (IrO_x) and its use as tip with a dual function in SECM experiments is reported. The defective structure of the coating onto the microelectrode surface was used as strategy to combine the advantages of both amperometric (for current‐distance determination) and potentiometric (for pH sensing) SECM operation modes. Approach curves, using oxygen and hexaammineruthenium(III) as redox mediators, were obtained without significant loss of the performance and reproducibility of the potentiometric pH response. This allowed the precise positioning of the proposed tip above a substrate in SECM experiments and, subsequently, to monitor pH at the substrate surface. The IrO_x modified microelectrode was applied successfully in SECM experiments involving the local proton consumption during the nitrate reduction at a copper cathode surface.