Electrochemical Detection of DNA Hybridization Based on the Probe Labeled with Carbon‐Nanotubes Loaded with Silver Nanoparticles

A sensitive electrochemical method for the detection of DNA hybridization based on the probe labeled with multiwall carbon‐nanotubes (MWNTs) loaded with silver nanoparticles (Ag‐MWNTs) has been developed. MWNTs were electroless‐plated with a large number of silver nanoparticles to form Ag‐MWNTs. Probe single strand DNA (ss‐DNA) with a thiol group at the 3′‐terminal labeled with Ag‐MWNTs by self‐assembled monolayer (SAM) technique was employed as an electrochemical probe. Target ss‐DNA with a thiol group was immobilized on a gold electrode by SAM technique and then hybridized with the electrochemical probe. Binding events were monitored by differential pulse voltammetric (DPV) signal of silver nanoparticles. The signal difference permitted to distinguish the match of two perfectly complementary DNA strands from the near perfect match where just three base pairs were mismatched. There was a linear relation between the peak current at +120 mV (vs. SCE) and complementary target ss‐DNA concentration over the range from 3.1×10^?14 to 1.0×10^?11 mol/L with a detection limit of 10 fmol/L of complementary target ss‐DNA. The proposed method has been successfully applied to detection of the DNA sequence related to cystic fibrosis. This work demonstrated that the MWNTs loaded with silver nanoparticles offers a great promising approach for sensitive detection of DNA hybridization.     

Molecular numbers in core and shell: structural dependence of reactivity of alkylcarboxylate-stabilized silver nanoparticles

Spectroscopic, chemical, thermal, and voltammetric analyses on six kinds of alkylcarboxylate-stabilized silver nanoparticles 4.7 nm in diameter were carried out with an aim to reveal the effect of alkylcarboxylates on the optical, thermal, geometric, and electrochemical properties of the nanoparticles. These nanoparticles are composed of silver atoms and silver alkylcarboxylates having even numbers, m, of carbon atoms from 8 to 18. As a measure of the structure of the nanoparticles, the ratio of the number of silver atoms (nAg) to that of alkylcarboxylates (ns) per nanoparticle was evaluated by means of titration through chemical oxidation, voltammetric currents, and thermal gravimetric analysis. It increased with an increase in m and ranged from 1.3 to 9.8. Properties of the nanoparticle have been exhibited in absorbance of the UV-vis spectra at the point of the proportionality to n(Ag), voltammetric currents of which values were close to the theoretical values at the diffusion of particle itself, and the m-independent kinetic energy of the thermal decomposition and the overpotential of the reduction. They are not observed for the composed species, that is, silver atoms and silver alkylcarboxylate molecules.     

Electrochemical and Spectroscopic Studies on the Interaction of Gatifloxacin,Moxifloxacin and Sparfloxacin with DNA and Their Analytical Applications

The electrochemical oxidation of the three fluoroquinolone drugs FQs: gatifloxacin GTF, moxifloxacin MXF and sparfloxacin SPF, at the bare and DNA‐modified glassy carbon electrodes has been studied by voltammetric techniques. The three FQs showed one irreversible oxidation peak at potential range 0.85–0.91 V vs. Ag‐AgCl, in phosphate buffer of pH 7.0. Differential pulse voltammetry (DPV) and UV‐absorption spectroscopic techniques were employed to probe the interaction between the FQs and calf thymus double stranded deoxyribonucleic acid (ds CT‐DNA). From electrochemical data, the binding constant between DNA and the gatifloxacin, moxifloxacin and sparfloxacin are calculated to be 3228, 2596 and 2857 M^?1 respectively. Based on electrochemical and spectroscopic results, the mode of binding of fluoroquinolone to DNA through combined effect of intercalation and electrostatic interaction was concluded. A detection scheme based on a preconcentration and differential pulse voltammetric (DPV) determination at dsDNA modified glassy carbon electrode (DNA/GCE) was proposed for the trace determination of the studied analytes. The developed method was successfully applied to the determination of the FQs in pharmaceutical formulations.     

Effect of Chemical Charging/Discharging on Plasmonic Behavior of Silver Metal Nanoparticles Prepared using Citrate‐Stabilized Cadmium Selenide Quantum Dots

The thermodynamics and kinetics of the chemical and electrochemical charging of a catalyst surface are very important to understand its applicability as a catalyst material, particularly in redox catalysis. Through the present study, we hereby communicate the results obtained from our detailed investigations related to the effect of chemical charging on the plasmonic behavior of silver metal nanoparticles (Ag MNPs) as redox catalysts. Two different batches of Ag MNPs were prepared through thermally assisted chemical reduction of silver ions. The difference in these batches was the use or not of citrate‐capped cadmium selenide quantum dots (Q‐CdSe) for the reduction of solution‐phase silver ions to their colloidal plasmonic phase. The charge on the surfaces of the Ag MNPs was varied by the chemical electron injection method by using BH₄^? ions from a NaBH₄ solution. The processes of charging and discharging were monitored by using UV/Vis absorption spectroscopy. The impact of the concentration of the reductant on the charging and discharging processes was also investigated. The Ag MNPs were also tested for their voltammetric response, wherein it was observed that it was more difficult to oxidize the Ag MNPs prepared with Q‐CdSe seeds than to oxidize Ag MNPs prepared without Q‐CdSe particles. Our results demonstrate that Q‐CdSe seeds not only enhance the redox catalytic activity of Ag MNPs but also provide stability towards polarization of their plasmonic behavior.     

Green Synthesis of Silver Nanoparticles Using Ionic Liquid and Application for the Detection of Dissolved Oxygen

The electrochemical synthesis of silver nanoparticles (nano‐Ag) has been successfully carried out on glassy carbon electrode (GCE) and indium tin oxide electrode (ITO) using 1‐butyl‐3‐methylimidazolium tetrafluoroborate (BMT) as green electrolytes. Further the electrodeposited nano‐Ag modified ITO electrode has been examined using atomic force microscopy (AFM), and X‐ray diffraction studies (XRD). The electrodeposited Ag nanoparticles on ITO were found in the size range of 5 to 35 nm. The nano‐Ag film modified GCE was further coated with nafion (Nf) and BMT (1 : 1 ratio) mixture and found to be stable in BMT and in pH 7 phosphate buffer solution (PBS). The nano‐Ag/BMT‐Nf film modified GCE successfully applied for the oxygen reduction reaction in neutral pH (pH 7.0 PBS). The proposed film modified GCE successfully reduces the over potential and show well defined reduction peaks for the detection of dissolved oxygen using cyclic voltammetry (CV) and rotating disc voltammetry (RDE). The film also applied for the detection of dissolved oxygen using electrochemical impedance spectroscopic studies (EIS).     

Improved Sensing of Capsaicin with TiO2 Nanoparticles Modified Epoxy Graphite Electrode

The presented research focuses on the electrochemical determination of capsaicin, a lipophilic alkaloid which originates hotness in chili peppers. An electrochemical sensor based on epoxy‐graphite composite with the modification of titanium dioxide (TiO₂) nanoparticles is developed for the determination of this alkaloid. The measurements were carried out in glycine buffer at pH 2.5 using cyclic voltammetry. Two linear concentration ranges were obtained from 6 to 75 μM (R=0.99) and from 12 to 138 μM, with a detection limit of 5.34 μM and 11.3 μM capsaicin, for 1^st and 2^nd oxidation peak, respectively. The main advantage of developed sensor is its repeatability and robustness against fouling; the relative standard deviation (RSD) value was 2.53 % (n=10). This voltammetric sensing procedure has successfully been applied to quantify capsaicin in various real samples such as hot chili sauce and pharmaceutical preparations.     

Enzyme-catalyzed silver deposition on irregular-shaped gold nanoparticles for electrochemical immunoassay of alpha-fetoprotein

A new and disposable electrochemical immunosensor was designed for detection of alpha-fetoprotein (AFP), as a model analyte, with sensitivity enhancement based on enzyme-catalyzed silver deposition onto irregular-shaped gold nanoparticles (ISGNPs). The assay was carried out with a sandwich-type immunoassay protocol by using ISGNP-labeled anti-AFP antibodies conjugated with alkaline phosphatase (ALP–Ab₂) as detection antibodies. The enzymatically catalytic deposition of silver on the electrode could be measured by stripping analysis in KCl solution due to the Ag/AgCl solid-state voltammetric process. Several labeling protocols including spherical gold nanoparticle-labeled ALP–Ab₂ and ISGNP-labeled ALP–Ab₂ were investigated for determination of AFP, and improved analytical properties were achieved with the ISGNP labeling. With the ISGNP labeling method, the effects of incubation time and incubation temperature for antigen-antibody reaction, and deposition time of silver on the current responses of the electrochemical immunosensors were also monitored. Under optimal conditions, the electrochemical immunosensor exhibited a wide dynamic range from 0.01 ng mL⁻¹ to 200 ng mL⁻¹ with a detection limit of 5.0 pg mL⁻¹ AFP. The immunosensor displayed a good stability and acceptable reproducibility and accuracy. No significant differences at the 95% confidence level were encountered in the analysis of 10 clinical serum samples between the developed immunoassay and the commercially available electrochemiluminescent method for determination of AFP.     

A Novel Electrochemical Sensor for Detection of Molinate Using ZnO Nanoparticles Loaded Carbon Electrode

In this work, electrochemical detection of molinate herbicide was studied by developing a novel sensor based on carbon paste incorporated with zinc oxide (ZnO) nanoparticles using cyclic (CV) and square wave voltammetric (SWV) techniques. Molinate exhibited one well resolved peak at pH of 3.0 phosphate buffer solution (PBS), which was irreversible. The lowest possible detection limit of 1.0×10^?8 M was achieved in the concentration range of 0.002 μM to 0.25 μM. The modifying ability of ZnO nanoparticles was responsible for such a low level sensing in water and soil samples.     

Correlation between Electrochemical Impedance and Spectroscopic Measurements in Adsorbing Paraquat on Silver: Application in Underground Water Samples

The electrochemical impedance spectroscopy (EIS) has been used to study the interaction between paraquat and carbon modified by silver (Ag? CPE) and silver particles‐impregnated natural phosphate (Ag/NPh? CPE). This study was developed using spectrophotometry (UV? Vis) and infrared spectroscopy. The resulting interaction was controlled by adsorption at lower concentration (≤1.0×10^?5 mol L^?1) and by diffusion in the opposite case. Both electrodes are used to determining paraquat with a low detection limit (<1.0×10^?12 mol L^?1). The precision expressed as relative standard deviation RSD for the concentration level 1.0×10^?5 mol L^?1 of paraquat, (n=8) were 0.93 % and 1.1 % for Ag/NPh? CPE and Ag? CPE respectively.     

Silver nanoparticle assemblies supported on glassy-carbon electrodes for the electro-analytical detection of hydrogen peroxide

Electrochemical detection of hydrogen peroxide using an edge-plane pyrolytic-graphite electrode (EPPG), a glassy carbon (GC) electrode, and a silver nanoparticle-modified GC electrode is reported. It is shown, in phosphate buffer (0.05 mol L^–1, pH 7.4), that hydrogen peroxide cannot be detected directly on either the EPPG or GC electrodes. However, reduction can be facilitated by modification of the glassy-carbon surface with nanosized silver assemblies. The optimum conditions for modification of the GC electrode with silver nanoparticles were found to be deposition for 1 min at –0.5 V vs. Ag from 5 mmol L^–1 AgNO₃/0.1 mol L^–1 TBAP/MeCN, followed by stripping for 2 min at +0.5 V vs. Ag in the same solution. A wave, due to the reduction of hydrogen peroxide on the silver nanoparticles is observed at –0.68 V vs. SCE. The limit of detection for this modified nanosilver electrode was 2.0×10^–6 mol L^–1 for hydrogen peroxide in phosphate buffer (0.05 mol L^–1, pH 7.4) with a sensitivity which is five times higher than that observed at a silver macro-electrode. Also observed is a shoulder on the voltammetric wave corresponding to the reduction of oxygen, which is produced by silver-catalysed chemical decomposition of hydrogen peroxide to water and oxygen then oxygen reduction at the surface of the glassy-carbon electrode.     

银掺杂聚L-天冬氨酸修饰电极的制备及对多巴胺的测定

利用循环伏安法将银与L-天冬氨酸聚合修饰在玻碳电极表面,制成银掺杂聚L-天冬氨酸修饰电极,研究了多巴胺在此电极上的电化学行为,建立了循环伏安法测定多巴胺的新方法.在磷酸盐缓冲溶液(PBS, pH 7.0)中,扫描速率为50 mV/s时,多巴胺在修饰电极上产生一对氧化还原峰,Epa=0.191 V,Epc=0.161 V.用循环伏安法进行测定时,峰电流与多巴胺浓度分别在3.0×10-7 ～1.0×10-5 mol/L和1.0×10-5 ～5.0×10-4 mol/L内呈良好的线性关系; 检出限为5.0×10-8 mol/L.用于药物和尿样中多巴胺的测定,结果满意.     

Electrochemical Determination of Tyrosine in the Presence of Dopamine and Uric Acid at the Surface of Gold Nanoparticles Modified Carbon Paste Electrode

A gold nanoparticles modified carbon paste electrode (GN‐CPE) was used as a highly sensitive electrochemical sensor for determination of tyrosine (Tyr), dopamine (DA) and uric acid (UA) in phosphate buffer solution (PBS). The study and measurements were carried out by using cyclic voltammetry (CV), differential pulse voltammetry (DPV) and chronoamperometry methods. In DPV, the GN‐CPE could separate the oxidation peak potentials of DA and UA present in the same solution, though at the unmodified CPE the peak potentials were indistinguishable. The prepared electrode showed voltammetric responses with high sensitivity and selectivity for Tyr, DA and UA in optimal conditions, which makes it very suitable for simultaneous determination of these compounds. The calibration curves for Try, DA and UA were linear for the concentrations of each species. The proposed voltammetric approach was also applied to the determination of Tyr concentration in human serum as a real sample.     

An Electrochemical Sensor Based on Silver Nanoparticles‐Benzalkonium Chloride for the Voltammetric Determination of Antiviral Drug Tenofovir

A simple voltammetric nanosensor was described for the highly sensitive determination of antiviral drug Tenofovir. The benzalkonium chloride and silver nanoparticles were associated to build a nanosensor on glassy carbon electrode. Surface characterictics were achieved using scanning electron microscopic technique. The voltammetric measurements were performed in pH range between 1.0 and 10.0 using cyclic, adsorptive stripping differential pulse and adsorptive stripping square wave voltammetry. The linear dependence of the peak current on the square root of scan rates and the slope value (0.770) demonstrated that the oxidation of tenofovir is a mix diffusion‐adsorption controlled process in pH 5.70 acetate buffer. The linearity range was found to be 6.0×10⁻⁸–1.0×10⁻⁶ M, and nanosensor displayed an excellent detection limit of 2.39×10⁻⁹ M by square wave adsorptive stripping voltammetry. The developed nanosensor was successfully applied for the determination of Tenofovir in pharmaceutical dosage form. Moreover, the voltammetric oxidation pathway of tenofovir was also investigated at bare glassy carbon electrode comparing with some possible model compounds (Adenine and Adefovir).     

Contact probe electrochemical characterization and metal speciation of silver LLDPE nanocomposite films

A contact probe methodology, based on the voltammetry of immobilized microparticle approach, is used for characterizing silver species present in linear low density polyethylene (LLDPE) films with different Ag(I)/Ag(0) ratios and silver nanoparticle features usable as food contact polymers. The films displayed characteristic voltammetric features in contact with aqueous acetate buffer, in particular signals for the stripping oxidation of nanoparticulate Ag systems. Significant differences between the studied films were also observed by means of electrochemical impedance spectroscopy and detected at the nanoscopic scale using electrochemical scanning microscopy. Differences in optical and thermal properties of the studied films are associated with the presence of silver nanoparticles. The silver oxidation state as well as nanoparticle size also had influence on the oxidative resistance of the LLDPE films; indeed, films containing cationic silver showed the lowest oxidation induction time value.     

Chlorpromazine Electro‐oxidation at BDD Electrode Modified with nZVI Nanoparticles Impregnated NiAl LDH

Nanocomposite of nanoscale zero‐valent iron (nZVI) and layered double hydroxide (LDH) was used as modifier for boron‐doped diamond electrode in determination of anti‐psychotic drug chlorpromazine (CPZ). nZVI nanoparticles were prepared by liquid phase reduction of ferric chloride with sodium borohydride on the surface of NiAl LDH matrix owing to the strong exchange and confinement efficiency of LDH. The structure, binding and surface properties of the nZVI@LDH nanocomposite were monitored using powder X‐ray diffractometry, FT‐IR spectroscopy, scanning and transmission microscopy and BET techniques. The electrochemical properties of the modified electrode were investigated by CV and EIS, performed in a phosphate buffer containing ferro/ferricyanide as redox probe. The modified electrode exhibited excellent electrochemical performance compared with unmodified electrode. As regard potential application of the nanocomposite surface to the CPZ detection, square‐wave voltammetric signals showed a good linear correlation over CPZ concentrations in a broad range from 0.1 to 8.0 μM with low detection limit of 0.005 μM. Nevertheless, these results suggest that the proposed nanocomposite modifier surface provides exceptional synergy and significant enhancement effect to the voltammetric response of CPZ and thus could be applied as highly efficient and stable platform of sensors in clinical analysis.     

银掺杂聚L-天冬氨酸修饰电极的制备及对肾上腺素的测定

利用循环伏安法,研究了银和L-天冬氨酸在玻碳电极表面电化学聚合的条件,制备了银掺杂聚L-天冬氨酸修饰电极。研究了肾上腺素在修饰电极上的电化学行为,建立了循环伏安法测定肾上腺素的新方法。在pH=3.5的磷酸盐缓冲溶液中,扫描速率为50mV/s时,肾上腺素在修饰电极上产生一对明显的氧化还原峰,峰电位分别为Epa=0.447V,Epc=0.387V。用循环伏安法测定时,氧化峰电流与肾上腺素浓度分别在8.00×10-8～1.00×10-5mol/L和1.00×10-5～1.00×10-4mol/L范围内呈良好的线性关系,检出限为8.0×10-9mol/L。     

Electrocatalytic Activation of Silver Nanowires‐modified Pt Electrode by Cyclic Voltammetry in Comparison with Differential Pulse Voltammetry in Halide Determination

Cyclic voltammetric (CV) and differential pulse voltammetric (DPV) measurements were carried out to assess the changes in electrode reactivity in halide determination with a silver nanowire‐modified platinum electrode. With DPV, successive voltammograms of the halide solution revealed progressive deterioration of the oxidation currents corresponding to Br^? and Cl^?, while those of I^? increased largely. Comparatively, CV is stable and effective to remove precipitates due to the reduction process, in which, the concentrated effect alleviated and the amount of AgI decreased. CV was consequently suggested to be favorable for halide determination, while playing a role in electrocatalytic activation of the electrode.     

Voltammetric determination of herbicide molinate in river water and rice samples using solid silver amalgam electrode fabricated with nanoparticles

The evaluation of the voltammetric behaviour and the determination of herbicide molinate were performed for the first time over the surface of solid amalgam electrode fabricated with silver nanoparticles using cyclic voltammetry and square-wave voltammetry techniques. The experimental and instrumental parameters were evaluated to reach the maximum analytical response for molinate. It was achieved when a medium composed of 0.04 mol L^?1 Britton–Robinson buffer at the pH value of 4.0 was used. Under these conditions, molinate showed one pronounced reduction peak at E_p = ?0.37 V (vs. Ag/AgCl 3 mol L^?1) that was characterised as an irreversible system. An analytical curve was constructed at the concentration range from 9.36 to 243.49 µg L^?1 and a limit of detection of 2.34 µg L^?1 was obtained. The amalgam electrode presented good stability during the measurements with relative standard deviation (RSD) values of 2.9% for the repeatability and 5.4% for the reproducibility. The voltammetric method developed here could be conveniently applied for the determination of molinate in river water and rice spiked samples at levels below those established on the legislations of European Union and Brazil with good accuracy (RSD of less than 5% for all samples). Comparison with HPLC technique was carried out and the results indicated satisfactory concordance. According to the results depicted here, the silver nanoparticles solid amalgam electrode showed itself highly sensitive and an interesting alternative for the routine analysis of molinate in water and food samples. Furthermore, it introduces an environmentally acceptable alternative to the mercury electrodes, most commonly used for determination of reducible pesticides.     

A Flexible Nafion Coated Enzyme‐free Glucose Sensor Based on Au‐dimpled Ti Structures

The detection of glucose at low concentrations using electrochemical sensors is of great importance due to the possibility of using different human body fluids than blood, such as e. g. urine, saliva, sweat or tears. The interest behind those biofluids is related to their utility in non‐invasive sugar determination. In this work, we present flexible, fully biocompatible electrode material based on Au nanoparticles immobilized onto titanium dimples. Au?Ti heterostructures were obtained via electrochemical anodization of titanium foil in presence of fluoride anions followed by chemical etching, magnetron sputtering of gold and subsequent thermal dewetting in continuous regime. In the last step of fabrication, electrodes were modified by permselective Nafion membrane. The selection of the best electrode material among different configurations was carried out basing on the electrochemical activity in the contact with 5 mM glucose dissolved in neutral air‐saturated 0.1 M PBS. For the 10 nm Au dewetted gold film, limit of detection of 30 μM and high sensitivity of 93 mA cm^?2 mM^?1 were achieved. Application of Nafion membrane caused complete inhibition of the impact of various interference species onto the glucose detection. Good selectivity and repeatability combined with the resistance to prolonged mechanical stress suggest that prepared material can be used in non‐invasive glucose sensing.