Application of bar adsorptive microextraction to determine trace organic micro-pollutants in environmental water matrices

The present work proposes the application of bar adsorptive micro-extraction (BAµE) coated with an N-vinylpyrrolidone polymer (NVP) combined with micro-liquid desorption (200 µL) followed by high-performance liquid chromatography with diode array detection (BAµE(NVP)-µLD/HPLC-DAD) for the determination of trace levels of emerging organic micro-pollutants in environmental water matrices. The model compounds selected include an antibacterial/antifungal agent (triclosan), two pharmaceuticals (carbamazepine and diclofenac) and two steroid hormones (17α-ethinylestradiol and 17β-estradiol), in which the latter three were recently included in the European Union watch list of substances to be monitored in the field of water policy. Assays performed on 25 mL of ultrapure water samples spiked at the 8.0 µg L^?1 level yielded average recoveries ranging from 81.9 to 102.4% for the compounds studied using optimised experimental conditions. The proposed analytical methodology demonstrated suitable detection limits (0.02–0.10 µg L^?1) and good linear dynamic ranges (0.1–20.0 µg L^?1) with determination coefficients higher than 0.9909. Using the standard addition method (SAM), the present analytical approach was applied on environmental water matrices, including surface, sea, river and groundwaters. The proposed method proved to be a suitable and alternative sorption-based static micro-extraction technique for monitoring trace levels of organic micro-pollutants in environmental water matrices.     

A novel approach to bar adsorptive microextraction: Cork as extractor phase for determination of benzophenone,triclocarban and parabens in aqueous samples

This study describes the use of cork as a new coating for bar adsorptive microextraction (BAμE) and its application in determining benzophenone, triclocarban and parabens in aqueous samples by HPLC–DAD. In this study bars with 7.5 and 15 mm of length were used. The extraction and liquid desorption steps for BAμE were optimized employing multivariate and univariate procedures. The desorption time and solvent used for liquid desorption were optimized by univariate and multivariate studies, respectively. For the extraction step the sample pH was optimized by univariate experiments while the parameters extraction time and ionic strength were evaluated using the Doehlert design. The optimum extraction conditions were sample pH 5.5, NaCl concentration 25% and extraction time 90 min. Liquid desorption was carried out for 30 min with 250 μL (bar length of 15 mm) or 100 μL (bar length of 7.5 mm) of ACN:MeOH (50:50, v/v). The quantification limits varied between 1.6 and 20 μg L⁻¹ (bar length of 15 mm) and 0.64 and 8 μg L⁻¹ (bar length of 7.5 mm). The linear correlation coefficients were higher than 0.98 for both bars. The method with 7.5 mm bar length showed recovery values between 65 and 123%. The bar-to-bar reproducibility and the repeatability were lower than 13% (n = 2) and 14% (n = 3), respectively.     

Fast analysis of phenolic acids by electrokinetic supercharging‐nonaqueous capillary electrophoresis

A method was developed to analyze phenolic acids by nonaqueous CE after online concentration with electrokinetic supercharging. The EOF was reversed using a polyelectrolyte multilayer approach based on the successive adsorption of poly(diallyldimethylamonium chloride) and poly(styrenesulfonate) to reduce the analysis time. The results showed that the coatings were stable during 40 consecutive injections. Four phenolic acids were separated within 8 min using 30 mM ammonium acetate (pH^* 8.0). The electrokinetic injection time and terminator length of the electrokinetic supercharging method were optimized to improve the detection sensitivity. Under the optimized conditions (electrokinetic injection of 100 s, ?10 kV; terminator of 20 mM 2‐(cyclohexylamino) ethanesulfonic acid, 22 s, 0.5 psi), the sensitivity was enhanced from 300‐ to 440‐fold. The detection limits, based on three times noise, were in the range 1.0–2.5 ng/mL.     

Establishing a sensitive capillary electrophoresis‐UV method for direct determination of amino acids to evaluate vinegar quality

In this study, the capillary electrophoresis method with ultraviolet detection was established to directly determine amino acids in vinegar, according to the coordination interaction between amino acids (AAs) and copper ions. The online sweeping technique was combined to improve the detection sensitivity. The quality of vinegar was evaluated with AAs as parameters by United Nations Food Agriculture Organization/Word Health Organization AAs model and principal component analysis. Optimum conditions were obtained under 50 mM CuSO₄ and adjusted pH 4.40 with 8 mM acetate, 70 s injection time, 22.5 kV separation voltage, and 254 nm detected wavelength. Method validation, indicating good linearity (R² > 0.9989), precision with an RSD less than 8.0% (n = 5), LOD (0.13–0.25 μg/mL), LOQ (0.43–0.83 μg/mL) and recovery (80.5–112.6%). Under the optimal conditions, AAs in vinegar can be directly separated which is propitious for the quality evaluation of vinegar.     

Single-drop microextraction followed by in-syringe derivatization and gas chromatography-mass spectrometric detection for determination of organic acids in fruits and fruit juices

A simple analytical procedure based on single-drop microextraction combined with in-syringe derivatization and GC-MS was developed for determination of some phenolic acids in fruits and fruit juices. Cinnamic acid, o-coumaric acid, caffeic acid, and p-hydroxybenzoic acid were used as model compounds. The analytes were extracted from a 3-mL sample solution using 2.5 microL of hexyl acetate. The extracted phenolic acids were derivatized inside the syringe barrel using 0.7 microL of N,O-bis(trimethylsilyl)acetamide before injection into the GC-MS. The influence of derivatization conditions on the yield of in-syringe silylation was studied. Experimental SDME parameters such as selection of organic solvent, solvent volume, extraction time, extraction temperature, pH, and ionic strength of the solution on the extraction performance were studied. The method provided fairly good precision for all compounds (2.4-11.9%). Detection limits were found to be between 0.6 and 164 ng/mL within an extraction time of 20 min in the GC-MS full scan mode.     

Research into conditions of quantitivity in the determination of carboniles in complex air matrices by adsorptive solid phase microextraction

This study focuses on certain aspects of the quantitivity of adsorptive solid phase microextraction when applied in the form of on-fibre derivatisation with O-(2,3,4,5,6)-pentafluorobenzyl-hydroxylamine hydrochloride (PFBHA) for the determination of carboniles in air samples of relevance in the atmosphere. The study was performed in the high-volume outdoor atmospheric simulation chambers (EUPHORE) located in Valencia (Spain). At short sampling times, the adsorption profiles obtained when only benzaldehyde was inserted in the chamber coincided with those obtained when other carbonylic compounds were also introduced at the same concentration, and this was also the case when the concentration of all the gaseous mixture components was increased considerably from one experiment to another. In a number of experiments applying different conditions, it was proven that all the extraction profiles belonged to the same regression when the fibre responses were plotted against the concentration-time product. A number of calibrations were obtained for benzaldehyde introduced in the chamber alone and in a mixture with three other carboniles at similar concentration values. A statistical test is applied to confirm that they all belonged to the same regression since they shared homogeneous variances. After these tests, the method of SPME on-fibre derivatisation for the determination of carboniles was considered to be safely applicable to quantification. Moreover, the concentration levels at which certain unwanted effects, i.e., displacement, saturation and competition, were observed are a few orders of magnitude higher than their occurrence levels in atmospheric processes.     

Selective preconcentration of amino acids and peptides using single drop microextraction in-line coupled with capillary electrophoresis

Single drop microextraction (SDME) can be in-line coupled with capillary electrophoresis by attaching a drop to the tip of a capillary. With a 2-layer drop comprised of an aqueous basic acceptor phase covered with a thin organic layer, acidic analytes in an aqueous acidic donor phase can be extracted into the organic layer and then back-extracted into the acceptor phase. However, preconcentration of amino acids and peptides by SDME is difficult since their zwitterionic properties prevent them from being partitioned in the middle organic phase. When amino acids were derivatized with 4-fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F), amino acids without a charged side chain were converted to carboxylic acids. In the acidic donor phase, those NBD-amino acids were predominantly neutral and they were successfully concentrated into the basic acceptor phase. In the meantime, amino acids with a charged side chain after NBD-F derivatization were not concentrated via SDME. With this selective SDME, we were able to extract acidic and neutral amino acids obtaining several hundred-fold enrichments within 5 min at 25 °C, while leaving basic amino acids—Arg, Lys, and His—in the acidic donor phase. Furthermore, detection sensitivity was enhanced by employing laser-induced fluorescence detection. We then applied this technique to the selective concentration of peptides.     

Dispersive liquid–liquid microextraction coupled with capillary electrophoresis for simultaneous determination of sulfonamides with the aid of experimental design

A novel method for the simultaneous determination of sulfonamides (SAs) in water samples has been developed by using dispersive liquid–liquid microextraction (DLLME) coupled with CE. Orthogonal and Box–Behnken designs were employed together to assist the optimization of DLLME parameters, including volumes of extraction and disperser solvents, ionic strength, extraction time, and centrifugation time and speed as variable factors. Under the optimum extraction and detection conditions, successful separation of the five SAs was achieved within 5 min, and excellent analytical performances were attained, such as good linear relationships (R>0.980) between peak area and concentration for each SA from 0.5 to 50 μg/mL, low limits of detection for the five SAs between 0.020 and 0.570 μg/mL and the intra‐day precisions of migration time below 0.80%. The method recoveries obtained at fortified 10 μg/mL for three water samples ranged from 53.6 to 94.0% with precisions of 1.23–5.60%. The proposed method proved highly sensitive and selective, rapid, convenient and cost‐effective, showing great potential for the simultaneous determination of SAs in water samples.     

A simple and rapid method for simultaneous determination of benzoic and sorbic acids in food using in-tube solid-phase microextraction coupled with high-performance liquid chromatography

A simple, rapid and sensitive on-line method for the simultaneous determination of benzoic and sorbic acids in food was developed by coupling in-tube solid-phase microextraction (SPME) to high-performance liquid chromatography (HPLC) with UV detection. The diethylamine-modified poly(glycidyl methacrylate-co-ethylene dimethacrylate) monolithic capillary selected as the extraction medium exhibited a high extraction capability towards benzoic and sorbic acids. To obtain optimum extraction performance, several in-tube SPME parameters were investigated, including pH value, inorganic salt, and the organic solvent content of the sample matrix. After simple dilution with 0.02 mol/L phosphate solution (pH 4.0), carbonated drink, juice drink, sauce and jam samples could be directly injected for extraction. For succade samples, a small amount of acetonitrile was required to extract analytes prior to dilution and subsequent extraction. The linearity of the method was investigated over a concentration range of 5–20000 ng/mL for both analytes, and the correlation coefficients (R ² values) were higher than 0.999. The detection limits for benzoic and sorbic acids were 1.2 and 0.9 ng/mL, respectively. The method reproducibility was tested by evaluating the intra- and interday precisions; relative standard deviations of less than 4.4 and 9.9%, respectively, were obtained. Recoveries of compounds from spiked food samples ranged from 84.4 to 106%. The developed method was shown to be suitable for the routine monitoring of benzoic and sorbic acids in various types of food samples.     

Using sheath‐liquid reagents for capillary electrophoresis‐mass spectrometry: Application to the analysis of phenolic plant extracts

The combination of CE and MS is now a widely used tool that can provide a combination of high resolution separations with detailed structural information. Recently, we highlighted the benefits of an approach to add further functionality to this well‐established hyphenated technique, namely the possibility to perform chemical reactions within the sheath‐liquid of the CE‐MS interface 1 . Apart from using hydrogen/deuterium exchange for online determination of numbers of exchangeable protons, the addition of DPPH? (2,2‐diphenyl‐1‐picrylhydrazyl) to the sheath‐liquid can be used as a fast screening tool for studying antioxidant characteristics of individual components. Such a CE‐MS methodology allows rapid and information‐rich analysis with minimal reagent and sample consumption to be performed. In the present work, we demonstrate the applicability of this approach for the characterization of phenolic plant extracts from the Labiatae family, namely Rosmarinus officinalis and Melissa officinalis. Using the described approach, a wide range of compounds (15 and 13 phenolic compounds, respectively) could be confidently identified using a combination of high resolution CE‐MS separations with implementation of online deuterium exchange and DPPH? reactions. These compounds included polyphenols, phenolic acids, and triterpene acids. In conjunction with online MS/MS experiments, extensive structural information for aglyconic and glycosylated antioxidants present in the extracts could be obtained using simple experimental changes, which can be carried out prior to the purchasing of expensive chemical standards or the time‐consuming preparative isolation of individual compounds.     

Separation of dietary omega‐3 and omega‐6 fatty acids in food by capillary electrophoresis

A lower dietary omega‐6/omega‐3 (n‐6/n‐3) fatty acid ratio (<4) has been shown to be beneficial in preventing a number of chronic illnesses. Interest exists in developing more rapid and sensitive analytical methods for profiling fatty acid levels in foods. An aqueous CE method was developed for the simultaneous determination of 15 n‐3 and n‐6 relevant fatty acids. The effect of pH and concentration of buffer, type and concentration of organic modifier, and additive on the separation was investigated in order to determine the best conditions for the analysis. Baseline separations of the 15 fatty acids were achieved using 40 mM borate buffer at pH 9.50 containing 50 mM SDS, 10 mM β‐cyclodextrin, and 10% acetonitrile. The developed CE method has LODs of <5 mg/L and good linearity (R² > 0.980) for all fatty acids studied. The proposed method was successfully applied to the determination of n‐3 and n‐6 fatty acids in flax seed, Udo® oils and a selection of grass‐fed and grain‐fed beef muscle samples.     

Evaluation of microextraction by packed sorbent,liquid–liquid microextraction and derivatization pretreatment of diet‐derived phenolic acids in plasma by gas chromatography with triple quadrupole mass spectrometry

Miniaturized sample pretreatments for the analysis of phenolic metabolites in plasma, involving protein precipitation, enzymatic deconjugation, extraction procedures, and different derivatization reactions were systematically evaluated. The analyses were conducted by gas chromatography with mass spectrometry for the evaluation of 40 diet‐derived phenolic compounds. Enzyme purification was necessary for the phenolic deconjugation before extraction. Trimethylsilanization reagent and two different tetrabutylammonium salts for derivatization reactions were compared. The optimum reaction conditions were 50 μL of trimethylsilanization reagent at 90°C for 30 min, while tetrabutylammonium salts were associated with loss of sensitivity due to rapid activation of the inert gas chromatograph liner. Phenolic acids extractions from plasma were optimized. Optimal microextraction by packed sorbent performance was achieved using an octadecylsilyl packed bed and better recoveries for less polar compounds, such as methoxylated derivatives, were observed. Despite the low recovery for many analytes, repeatability using an automated extraction procedure in the gas chromatograph inlet was 2.5%. Instead, using liquid–liquid microextraction, better recoveries (80–110%) for all analytes were observed at the expense of repeatability (3.8–18.4%). The phenolic compounds in gerbil plasma samples, collected before and 4 h after the administration of a calafate extract, were analyzed with the optimized methodology.     

Simultaneous determination of seven phenolic acids in three Salvia species by capillary zone electrophoresis with β‐cyclodextrin as modifier

A capillary zone electrophoresis method was developed for the simultaneous determination of seven phenolic acids, including protocatechuic aldehyde ( 1 ), salvianolic acid C ( 2 ), rosmarinic acid ( 3 ), salvianolic acid A ( 4 ), danshensu ( 5 ), salvianolic acid B ( 6 ), and protocatechuic acid ( 7 ), in Danshen and related medicinal plants. A running buffer composed of 20 mM sodium tetraborate adjusted to pH 9.0, and containing 12 mM β‐cyclodextrin as modifier. Baseline separation was achieved within 17 min running at the voltage of 20 kV, temperature of 25°C and detection wavelength of 280 nm. The relative standard deviations of migration time ranged from 0.2 to 0.7% and the peak area ranged from 1.5 to 3.7% for the seven analytes, indicating the good repeatability of the proposed method. The method was extensively validated by evaluating the linearity (R² ≥ 0.9992), limits of detection (0.14–0.36 μg/mL), limits of quantification (0.47–1.19 μg/mL), and recovery (96.0–102.6%). Under the optimum conditions, samples of Danshen and related medicinal plants were analyzed using the developed method with high separation efficiency.     

Polypyrrole–montmorillonite nanocomposite as sorbent for solid‐phase microextraction of phenolic compounds in water

A fiber‐coated polypyrrole–montmorillonite nanocomposite was prepared for solid‐phase microextraction. The fiber coating can be prepared easily; it is mechanically stable and exhibits relatively high thermal stability. The prepared fiber was evaluated for the extraction of some phenolic compounds from aqueous sample solutions by gas chromatography–mass spectrometry. The effects of the extraction and desorption parameters including extraction time, extraction temperature, stirring rate, ionic strength, pH and desorption temperature and time have been studied. At optimum conditions, the repeatability for one fiber (n = 5), expressed as % relative standard deviation was between 6.5 and 7.8% for the phenolic compounds. The detection limits for the studied phenolic compounds were between 0.05–1.3 ng/mL. The developed method offers the advantage of being simple to use, with shorter analysis time, lower cost, thermal stability of the fibers, and high relative recovery in comparison to conventional methods of analysis.     

悬浮固化分散液液微萃取-毛细管电泳法测定水中磺酰脲类除草剂

建立了悬浮固化分散液液微萃取-毛细管电泳法同时测定水中磺酰脲类除草剂残留的方法。以十二醇为萃取剂、甲醇为分散剂,采用悬浮固化分散液液微萃取技术对水样进行分离提取,并结合毛细管电泳法进行测定。该方法可以有效提取、分离、检测水中残留的微量苯磺隆、吡嘧磺隆、苄嘧磺隆等9种磺酰脲类除草剂,各待测物在10.0~1000 μg/L范围内线性关系良好,相关系数r≥0.992,方法检出限为2.40~7.50 μg/L,方法精密度为6.55%~13.9%。将该方法用于实际水样的测定,取得了较满意的结果,加标回收率为82.0%~104%。该方法简便快速,适合水中磺酰脲类除草剂的同时测定。     

基于离子液体的单滴微萃取-毛细管电泳在线联用测定水体中3种溴酚类化合物

建立了基于离子液体的单滴微萃取-毛细管电泳联用测定溴酚类化合物的方法。考察了萃取剂种类与体积、萃取时间、有机溶剂、盐浓度及萃取温度对萃取效率的影响。确定了最佳萃取条件为:以1-丁基-3-甲基咪唑六氟磷酸盐([C₄MIM]PF₆])离子液体作为萃取剂,萃取时间为8 min,样品溶液中NaCl浓度为10%(质量分数),萃取温度为20 ℃。在最佳条件下,3种溴酚(4-溴酚、2,6-二溴酚和2,4,6-三溴酚)在1~100 mg/L范围内呈良好的线性关系,线性相关系数为0.9939~0.9988;检出限为0.3 mg/L (S/N=3);该方法对3种溴酚的富集倍数分别为115.8、327.0和569.8; 6次平行测定的相对标准偏差为5.21%~6.47%;对本地区自来水、河水和湖水的加标回收率为87.8%~96.7%。结果表明,该方法稳定可靠,适合于水体中溴酚类污染物的测定。     

Dispersive liquid–liquid microextraction combined with online preconcentration MEKC for the determination of some phenoxyacetic acids in drinking water

A fast and simple technique composed of dispersive liquid–liquid microextraction (DLLME) and online preconcentration MEKC with diode array detection was developed for the determination of four phenoxyacetic acids, 2,4,5‐trichlorophenoxyacetic acid, 2,4‐dichlorophenoxyacetic acid, 2,6‐dichlorophenoxyacetic acid, and 4‐chlorophenoxyacetic acid, in drinking water. The four phenoxyacetic acids were separated in reversed‐migration MEKC to the baseline. About 145‐fold increases in detection sensitivity were observed with online concentration strategy, compared with standard hydrodynamic injection (5 s at 25 mbar pressure). LODs ranged from 0.002 to 0.005 mg/L using only the online preconcentration procedures without any offline concentration of the extract. A DLLME procedure was used in combination with the proposed online preconcentration strategies, which achieved the determination of analytes at limits of quantification ranging from 0.2 to 0.5 μg/kg, which is far lower than the maximum residue limits established by China. The satisfactory recoveries obtained by DLMME spiked at two levels ranged from 67.2 to 99.4% with RSD <15%, making this proposed method suitable for the determination of phenoxyacetic acids in water samples.     

Three‐phase hollow‐fiber liquid‐phase microextraction combined with HPLC–UV for the determination of isothiazolinone biocides in adhesives used for food packaging materials

The present study deals with the development of a liquid microextraction procedure for enhancing the sensitivity of the determination of 2‐methyl‐4‐isothiazolin‐3‐one and 5‐chloro‐2‐methyl‐4‐isothiazolin‐3‐one in adhesives. The procedure involves a three‐phase hollow‐fiber liquid‐phase microextraction using a semipermeable polypropylene membrane, which contained 1‐octanol as the organic phase in the pores of the membrane. The donor and acceptor phases are aqueous acidic and alkaline media, respectively, and the final liquid phase (acceptor) is analyzed by HPLC coupled with diode array detection. The most appropriate conditions were extraction time 20 min, stirring speed 1400 rpm, extraction temperature 50°C. The quantification limits of the method were 0.123 and 0.490 μg/g for 2‐methyl‐4‐isothiazolin‐3‐one and 5‐chloro‐2‐methyl‐4‐isothiazolin‐3‐one, respectively. Three different adhesive samples were successfully analyzed. The procedure was compared to direct analysis using ultra high pressure liquid chromatography coupled with TOF‐MS, where the identification of the compounds and the quantification values were confirmed.