Capillary zone electrophoresis investigation of the interaction between heparin and granulocyte-colony stimulating factor

The interaction between standard heparin, low-molecular-weight heparin (LMWH), and granulocyte-colony stimulating factor (G-CSF) was studied by capillary zone electrophoresis. Both qualitative and quantitative characterizations of the heparin-protein binding were determined. The binding constants of the two different groups of heparins with G-CSF, calculated from the Scatchard plot by regression, were 4.805 x 10(5) M(-1) and 4.579 x 10(5) M(-1), respectively. The two binding constants measured are of the same order of magnitude at 10(5) M(-1), indicating that LMWH contains most of the functional groups bound to G-CSF by standard heparin.     

Quantitative investigation of the interaction between granulocyte-macrophage colony-stimulating factor and heparin by capillary zone electrophoresis

The interactions between granulocyte-macrophage colony-stimulating factor (GM-CSF) and heparin or low-molecular weight heparin (LMWH) were studied by CZE. It was found that GM-CSF could bind to both heparin and LMWH. The binding constants were calculated from Scatchard regression to be (6.5 +/- 0.8) x 10(5)/M and (11.2 +/- 0.7) x 10(5)/M, respectively. The specificity of the interaction between GM-CSF and heparin was also studied by employing another sulfated K carrageenan oligosaccharide as a control. Results showed that K carrageenan oligosaccharide could not interact with GM-CSF, indicating that GM-CSF could specifically interact with heparin.     

Separation, identification, and interaction of heparin oligosaccharides with granulocyte-colony stimulating factor using capillary electrophoresis and mass spectrometry

A capillary electrophoresis (CE) method was developed for the separation of heparin oligosaccharides compatible to study the interactions between the oligosaccharides and granulocyte-colony stimulating factor (G-CSF). Unfractionated heparin was eliminitively degraded to heparin oligosaccharides by an endolytic heparinase. The degraded smaller oligosaccharides (M(r) < 1000) were baseline-separated by CE under a 50 mM phosphate buffer (pH 9.0) in 10 min. Standard heparin disaccharides and larger oligosaccharides (1000 < M(r) < 8000) were all separated under optimized separation conditions. Compared with standard heparin disaccharides, smaller oligosaccharides contained one nonsulfated, two monosulfated, and two disulfated disaccharides, but trisulfated disaccharides were not found. The smaller oligosaccharides were also identified and molecular mass was deduced by electrospray ionization-mass spectrometry (ESI-MS). Furthermore, interactions between G-CSF and the oligosaccharides were studied by using capillary zone electrophoresis (CZE) under the above separation conditions. It was found that larger oligosaccharides could interact with G-CSF while smaller oligosaccharides were not observed to bind to G-CSF under the experimental conditions. In conclusion, the purified heparinase could selectively degrade heparin into oligosaccharides and the interaction between G-CSF and heparin was correlated with the chain length of heparin.     

Rapid and subnanomolar assay of recombinant human erythropoietin by capillary electrophoresis using NanoOrange precolumn labeling and laser‐induced fluorescence detection

Because of less functionally critical carbohydrate sectors that contributed to the stability, efforts have been made to quantify intact recombinant human erythropoietin. A simple, rapid capillary electrophoresis with laser‐induced fluorescence method for the assay of recombinant human erythropoietin was developed, with a limit of detection of intact recombinant human erythropoietin at subnanomolar concentration (up to 10 ng/mL or 3 × 10^?10 M), which is among the lowest reported. High sensitivity was accomplished by precolumn derivatization with the noncovalent dye NanoOrange. Capillary electrophoresis separation and reaction conditions were carefully manipulated for avoiding microheterogeneity of glycoforms and inhomogeneity of multiple labeling products. The fluorescence signal was linear over the range of 10 ng/mL–10 μg/mL, corresponding to the detection requirement of recombinant human erythropoietin in biofluids and pharmaceutical samples, as demonstrated by a real sample analysis. Although the salt in reaction mixtures showed a detrimental effect on the fluorescence of the derivatives, this method could tolerate a certain amount of salt, extending its application in biofluid analysis. In addition, zero‐order fluorescence emission kinetics was obtained, indicating that the rapid decay of recombinant human erythropoietin was derived from a self‐quenching effect.     

Fractionation of glycoforms of recombinant human erythropoietin by preparative capillary isotachophoresis

This feasibility study deals with the use of preparative capillary isotachophoresis (CITP), operating in a discontinuous fractionation mode, to the separations and isolations of glycoforms of recombinant human erythropoietin (rhEPO). The preparative CITP separations were monitored by capillary zone electrophoresis (CZE) with a hydrodynamically closed separation unit. Such a CZE system, suppressing fluctuations of the migration data linked with fluctuations of EOF and hydrodynamic flow, made possible to evaluate and compare the preparative CITP separations performed within a longer time frame. Preparative CITP, carried out in the separation unit with coupled columns of enhanced sample loadability, separating 100 microg of rhEPO in a run lasting ca. 30 min, gave the production rate higher than 55 ng/s for the rhEPO glycoforms. The preparative separations included valve isolations of the glycoforms from the ITP stack into four or six fractions. Such numbers of the fractions corresponded to typical numbers of the major glycoform peaks as resolved in CZE of rhEPO. With respect to close effective mobilities of the glycoforms and a multicomponent nature of rhEPO, the fractions contained mixtures of glycoforms with the dominant glycoforms enriched 10-100-fold, relative to the original rhEPO sample.     

Analysis of chlortetracycline and related substances by capillary zone electrophoresis: Development and validation

Summary A capillary zone electrophoresis method has been developed and validated for the analysis of chlortetracycline and related substances. The influence of the type of buffer, pH and concentration of the buffer were investigated. In all cases 1 mM EDTA was added to prevent metal ion complexation. Instrumental parameters such as capillary temperature and applied voltage were optimised. The following methods is proposed: capillary: fused silica, 44 cm (36 cm effective length), 50 μm i.d.; buffer: 120 mM sodium tetraborate including 1mM EDTA at pH 8.5; voltage: 10 kV; temperature: 25°C; detection wavelength: 280 nm. The robustness of the method has been examined by means of a full-fraction factorial design. The parameters for validation namely relative standard deviation, linearity, precision, limit of detection and limit of quantitation are also reported.     

Analytical potential of enzyme-coated capillary reactors in capillary zone electrophoresis

Enzymes immobilized on the inner surface of an electrophoretic capillary were used to increase sensitivity and resolution in capillary zone electrophoresis (CZE). Sensitivity is enhanced by inserting a piece of capillary containing the immobilized enzyme into the main capillary, located before the detector, in order to transform the analyte into a product with a higher absorptivity. This approach was used to determine ethanol. In order to improve resolution, capillary pieces containing immobilized enzymes were inserted at various strategic positions along the electrophoretic capillary. On reaching the enzyme, the analyte was converted into a product with a high electrophoretic mobility, the migration time for which was a function of the position of the enzyme reactor. This approach was applied to the separation and determination of acetaldehyde and pyruvate. Finally, the proposed method was validated with the determination of ethanol, acetaldehyde, and pyruvate in beer and wine samples.     

毛细管区带电泳法测定粉针剂中头孢拉定的含量

用毛细管区带电泳法测定头孢拉定的含量 ,未涂层毛细管柱 (75 μm×48.5cm ,有效长度 40cm) ,电压 2 8kV ,检测波长 2 3 0nm ,温度 2 0℃ ,进样 5×1 0 3Pa× 3s。运行缓冲液为 2 5mmol/L硼砂缓冲液。方法的线性范围 3 1 .2 2μg/mL～ 749.2 8μg/mL ,检测限为 1 .1 7μg/mL。     

Further characterization of the binding of heparin to granulocyte colony-stimulating factor: importance of sulfate groups

Heparin mediates fundamental biological mechanisms through interaction with proteins. Previously, we have shown that standard heparin binds to granulocyte colony-stimulating factor (G-CSF) with an affinity of 4.8 x 10(5) M(-1). To further study the structural features in heparin that are responsible for this interaction, we studied the bindings of G-CSF and N-desulfated and 2,3-O-desulfated heparin by CZE. Results showed that the N-desulfated heparin had a similar affinity for G-CSF ((5.4 +/- 0.9) x 10(5) M(-1)), but the 2,3-O-desulfated heparin had a 1000-fold lower affinity ((3.4 +/- 1.2) x 10(2) M(-1)) in comparison to standard heparin. The results showed that 2,3-O-sulfate groups are more important than N-sulfate groups in heparin-G-CSF interaction.     

Purity testing of sulfonic acids of different chain length by capillary electrophoresis

Summary A CZE method has been developed for the purity testing of sulfonic acids. By use of an optimized electrolyte system, short analysis times and high resolution (R _S=2–4) can be achieved for inorganic anions and for alkyl sulfonic acids from methane-1- to decane-1-sulfonic acid. By use of indirect UV detection by-products of different sulfonic acids can be determined at the 2 m level, equivalent to 0.02%,w/w. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

Interactions of dextran sulfates with granulocyte colony-stimulating factor and their effects on leukemia cells

The interactions between granulocyte colony-stimulating factor (G-CSF) and dextran sulfate (DS) with different chain lengths and sulfate contents were studied by capillary zone electrophoresis. It was found that DS with a molecular mass of 500 kDa (DS500) could bind to G-CSF and the binding constant and binding sites were determined using Scatchard plot to be 1.17 x 10(6) M(-1) and 3, respectively. DS with a molecular mass of 40 kDa also had the affinity to G-CSF and the binding constant and binding sites were 1.01 x 10(6) M(-1) and 8, respectively. However, DS with a molecular mass of 8 kDa and the non-sulfated saccharide, dextran, had no affinity to G-CSF. The results indicate that the interactions between G-CSF and DS are dependent on the chain lengths and sulfate contents of the saccharides. In addition, the effects of G-CSF-binding DS on a G-CSF-dependent leukemia cell line were investigated using biological methods. Results show that DS500 plus G-CSF has potential therapeutic effect on cancers because their combination could inhibit the growth and induce the differentiation of the leukemia cells.     

Charge density profiling of circulating human low-density lipoprotein particles by capillary zone electrophoresis

Capillary zone electrophoresis (CZE) has been utilized to profile the low-density (LDL) particles in human blood serum in this study. A 5 mM sodium phosphate buffer, pH 7.40, was chosen as the most suitable CE buffer and an extensive ultrafiltration (UF) procedure was applied to purify the LDL sample. Two LDL particle species, LDL with lower mobility and LDL- with higher mobility were observed. The electropherograms were highly reproducible with good precision of effective mobilities, corrected peak areas (CPAs) and CPA ratio of LDL-/LDL. LDL particles shown on the electropherogram were also characterized by several procedures. The applications of Sigma HDL cholesterol reagent and CE on-line 2-propanol precipitation indicated that the two particle species shown in the electropherogram belong to LDL. The LDL particles were found to associate with the buoyant LDL fraction and the LDL- particles associate with the dense LDL fraction. This study utilizes CZE for the profiling of LDL isoforms and provides a new analytical method for the resolution of LDL subspecies. It demonstrates a high-mobility LDL particle which circulates in healthy subjects and diminishes in atherosclerotic patients. Diminution of the high-mobility LDL subspecies may be linked to minimal formation of arterial plaque in atherosclerotic patients.     

Separation of organic and inorganic arsenic species by capillary zone electrophoresis

Summary Capillary zone electrophoresis has been used to separate arsenite, arsenate, dimethylarsinic acid, and phenyl-,p-aminophenyl-, ando-aminophenylarsinic acids. Identification and quantification of the arsenic species at mg L⁻¹ levels was possible by use of direct UV detection at 200 nm. The relative standard deviation (n=7) ranged from 0.97 to 1.52% for migration times and from 2.08 to 4.31% for peak areas. A method for rapid separation of inorganic arsenic species was also developed; by use of this method arsenite and arsenate could be separated within 2 min. Presented at Balaton Symposium on High-Performance Separation Methods, Siófok, Hungary, September 1–3, 1999     

Separation of human fibrinopeptides by capillary zone electrophoresis

We describe a method for the simultaneous determination of the five fibrinopeptide forms derived from the thrombin-promoted activation of human fibrinogen by capillary zone electrophoresis (CZE). The fibrinopeptide mixture was first desalted by a solid-phase extraction (SPE) step. The analysis was performed in reversed polarity in a highly cross-linked polyethylene glycol (PEG)-coated capillary with UV-light absorption detection at 200 nm. Several parameters including buffer concentration and pH, presence of an organic modifier, temperature, and applied voltage, have been tested. The best separations were obtained within 20 min, utilizing a 20 mM sodium phosphate buffer without organic modifier, in the narrow 6.1-6.2 pH range, at 25 degrees C, with an applied voltage of 20 kV. Quantitative analysis is made possible by the use of sheep fibrinopeptide A as an internal standard to correct for both extraction and injection errors.     

Simultaneous determination of sulfamethoxazole and trimethoprim in human plasma by capillary zone electrophoresis

A capillary electrophoretic method for the simultaneous determination of sulfamethoxazole and trimethoprim in plasma was developed. Sulfamethoxazole and trimethoprim extracted from human plasma with ethyl acetate were analyzed at 20 kV and 25 degrees C using 15 mm phosphate buffer (pH 6.2) as the electrolyte. The detection was by UV at 220 nm. The run time was 8.0 min and the limit of quantification was 10.00 microg/mL for sulfamethoxazole and 2.00 microg/mL for trimethoprim. The recovery was >99% for both compounds. This method enabled the detection of sulfamethoxazole and trimethoprim in plasma of patients after oral ingestion of their combined formulation. The present simple and rapid method is applicable to drug monitoring in immunocompromised patients who are taking the combined formulation of these compounds for the treatment or prophylaxis of Pneumocystis carinii pneumonia.     

Simultaneous determination of substrate and product in the process of preparation of valienamine by capillary zone electrophoresis

A simple and rapid CZE method was established for the simultaneous determination of valienamine, acarbose and validamycin A, using a 20‐kV CZE with the detection wavelength of 193 nm and 50 mM phosphoric acid–20 mM Tris (pH 5.3) as a running buffer. The calibration curves of valienamine, acarbose, and validamycin A showed a good linear relationship at a concentration range of 5–1000 μg/mL. The detection limits of valienamine, acarbose, and validamycin A were 0.3, 0.6, and 0.6 μg/mL, respectively, and the average recoveries of each of the above were 99.9, 99.5, and 100.3%. The method has been successfully applied for simultaneous determination of substrate and product in the process of preparation of valienamine.     

高效毛细管区带电泳法快速测定尿液中的肌酐

建立了一种快速测定尿中肌酐浓度的高效毛细管电泳方法。利用非涂层石英毛细管(64.5 cm×50μm i.d),以pH 2.5,0.1 mmol/L H3PO4作为电泳缓冲液,检测波长191 nm,用0.05 Pa压力进样4 s,在电压16 kV快速分离尿液中的肌酐,采用外标法定量。肌酐的迁移时间约为5.5 min,肌酐浓度在34.5~8840μmol/L范围内呈良好的线性(r2=0.999)。平均日内精密度为2.5%,日间精密度为3.0%。回收率94.1%~99.0%。与全自动生化分析仪碱性苦味酸速率法相比有良好的相关性(r=0.990,n=56)。高效毛细管电泳法测定尿肌酐可应用于临床样品的检测。     

Determination of egg white lysozyme by on-line coupled capillary isotachophoresis with capillary zone electrophoresis

An on-line coupled capillary isotachophoresis - capillary zone electrophoresis method for the determination of lysozyme in selected food products is described. The optimized electrolyte system consisted of 10 mM NH(4)OH + 20 mM acetic acid (leading electrolyte), 5 mM epsilon -aminocaproic acid +5 mM acetic acid (terminating electrolyte), and 20 mM epsilon -aminocaproic acid +5 mM acetic acid +0.1% m/v hydroxypropylmethylcellulose (background electrolyte). A clear separation of lysozyme from other components of acidic sample extract was achieved within 15 min. Method characteristics, i.e., linearity (0-50 micrograms/mL), accuracy (recovery 96+/-5%), intra-assay (3.8%), quantification limit (1 microgram/ml), and detection limit (0.25 microgram/mL) were determined. Low laboriousness, sufficient sensitivity and low running costs are important attributes of this method. The developed method is suitable for the quantification of the egg content in egg pasta.