Structural analysis of glycosphingolipid analogues obtained by the saccharide primer method using CE‐ESI‐MS

A glycosphingolipid analogue (12‐azidododecyl β‐lactoside) as a saccharide primer has been shown to be useful for the synthesis of oligosaccharide libraries by mammalian cells. In the present study, CE‐ESI‐MS was employed to elucidate the structure of glycosphingolipid analogues derived from 12‐azidododecyl β‐lactoside (Lac‐C12N3) by mammalian cells. MDCK cells and COLO201 cells were cultured with Lac‐C12N3, and the glycosylated products secreted into the medium were collected and separated into acidic and neutral products by column chromatography. The acidic products could be directly analyzed by CE‐ESI‐MS, while the neutral products were converted to anionic derivatives via a reaction with propiolic acid. With this method, it was possible to analyze both acidic and neutral products glycosylated by MDCK cells and COLO201 cells at high sensitivity.     

Multi-dimensional mapping of pyridylamine-labeled N-linked oligosaccharides by capillary electrophoresis

A simple, sensitive and reproducible multi-dimensional capillary electrophoresis (CE) oligosaccharide mapping method is reported. The structures of 20 identified N-linked oligosaccharides have been assigned mapping positions from which co-migrating unknown oligosaccharides can be characterized. The separation protocols developed have been demonstrated to separate both charged and neutral oligosaccharides. One dimension involves electroendosmotic flow-assisted CE in a sodium acetate buffer, pH 4.0. A second dimension involves separation based on borate complexation electrophoresis in a polyethylene glycol-containing buffer. A third dimension developed specifically for neutral oligosaccharides, using a sodium phosphate buffer, pH 2.5, has been shown to resolve neutral species not able to be separated by the other two dimensions. Thus, a three-dimensional map was generated to facilitate structural characterization of these oligosaccharides.     

寡糖—8—氨基芘—1,3,6—三磺酸衍生物的毛细管电泳—激光诱？…

利用自组装的毛细管电泳－激光诱导荧光装置,研究了多种寡糖－８－氨基芘－１,３,６－三磺酸（寡糖ＡＰＴＳ）衍生物的分离。考察了电泳介质、浓度及pＨ对寡糖－ＡＰＴＳ 衍生物分离的影响,在酸性和碱性条件下,分别实现了痕量寡糖标准品及葡聚糖水解产物的高效分离。     

基于电喷雾电离质谱(ESI-MS)的苯胺稳定同位素标记对还原性寡糖(链)的定性定量分析方法

建立了一种基于电喷雾电离质谱的苯胺稳定同位素标记对还原性寡糖链进行定性及相对定量分析的研究方法. 用苯胺标记乳糖标准品, 优化了影响标记效率的各种因素, 在弱酸性环境下, 选择糖链/苯胺/硼氢氰化钠的摩尔比为1∶1.2∶10, 于70 ℃反应15 min即可标记完全; 同时考察了4对d0/d5苯胺标记的麦芽糊精寡糖在电喷雾电离质谱中的线性、动态范围以及重现性. 结果表明, 在15倍动态范围内, 相对定量方法呈良好的线性关系(R=0.9986)和重现性(CV=10.20%). 为进一步验证定量方法的可靠性, 将其应用于人奶中游离寡糖(HMOs)和牛奶中游离寡糖(BMOs)的分析. 研究结果表明, 人奶中的乳糖含量高于牛奶, 人奶游离寡糖比牛奶游离寡糖种类复杂, 且岩藻糖基化程度高. 该方法成本低廉, 标记效率高且后处理方法简单方便, 适于微量样品通量化分析, 对差异糖组的研究有重要意义.     

Feasibility of nonvolatile buffers in capillary electrophoresis-electrospray ionization-mass spectrometry of proteins

The combination of capillary electrophoresis (CE) and electrospray ionization-mass spectrometry (ESI-MS) via a triaxial interface was studied as a potential means for the characterization of intact proteins. To evaluate the possibility to use a nonvolatile electrolyte for CE, the effect of sodium phosphate and ammonium borate on the MS signal of the proteins insulin, myoglobin, and bovine serum albumin (BSA) was investigated by employing infusion experiments, and compared to the effect of ammonium formate and formic acid. The study shows that with formic acid (50 mM, pH 2.4) the most intense protein signals were obtained, while the use of sodium phosphate buffer (5 and 10 mM, pH 7.5) almost completely diminished the MS response. Ammonium formate and ammonium borate (up to 100 mM, pH 8.5) also caused protein ion suppression, but especially with the borate buffer significant MS intensity remained. MS analysis of myoglobin revealed the loss of the heme group when an acidic CE electrolyte was used. Using a background electrolyte containing 25 mM ammonium borate (pH 8.5), it is demonstrated that a CE separation of a protein test mixture can be monitored with ESI-MS without degrading the MS performance allowing molecular weight determinations of the separated compounds. In the presence of borate, detection limits were estimated to be 5-10 microM (ca. 100 fmol injected). The usefulness of the CE-MS system employing a borate buffer is indicated by the analysis of a stored sample of BSA revealing several degradation products. A sample of placental alkaline phosphatase (PLAP), a potential therapeutic agent, was also analyzed by CE-MS indicating the presence of a protein impurity. Probably due to insufficient ionization of the PLAP (a complex glycoprotein), no MS signals of the intact protein were observed.     

Borate‐Driven Gatelike Scaffolding Using Mesoporous Materials Functionalised with Saccharides

We report the development of an MCM‐41 mesoporous support that is functionalised with saccharides at the pore outlets and contains the dye [Ru(bipy)₃]²⁺ in the pores (solid S1 ; bipy=2,2′‐bipyridyl). For this hybrid system, the inhibition of mass transport of the dye from the pore voids to the bulk solution in the presence of borate is demonstrated in water at neutral pH. The formation of the corresponding boroester derivative is related to the selective reaction of borate with the appended saccharides. This control is selective and only anion borate, among several anions and cations, can act as a molecular tap and inhibit the delivery of the entrapped guest. Additionally, the S1 –borate system behaves as pH‐controlled gatelike scaffolding. This pH‐responsive release can be achieved in an acidic pH (due to hydrolysis of the boroester), whereas the system remains closed at neutral pH. Molecular dynamic simulations using force‐field methods have been made to theoretically study the open/close borate‐driven mechanism. A mesoporous silica structure was constructed for this purpose, taking the plane (1?11) of the β‐cristobalite structure as a base on which hexagonal nanopores and anchored saccharide derivatives were included. The final model shows a highly flexible nanopore diameter of approximately 12.5 Å of similar size to the [Ru(bipy)₃]²⁺ complex (ca. 12 Å). However, the anchoring of borate to the appended saccharides results in a remarkable reduction of the pore size (down to ca. 6.4 Å) and a significant constraint in the flexibility and mobility of the saccharides. The theoretical calculations are in agreement with the experimental results and enable visualisation of the functional borate‐driven dye‐delivery‐inhibition outcome.     

Quantitative and selective analysis of lactose by capillary electrophoresis

Summary A CE method has been validated for the analysis of batches of lactose used as a pharmaceutical raw material. This method was shown to be selective for lactose and was found to be quantitative. The separation was achieved due to on-capillary chelation of the lactose with borate ion. The resulting complex was detected at 195nm. An internal standard is employed to improve injection precision and detector linearity. A system peak occurred in the separation and was systematically investigated to show that it was not sample related. The method was validated and successfully submitted to regulatory authorities and is now in routine use in a number of our quality control laboratories.     

Separation of negatively charged carbohydrates by capillary electrophoresis

Capillary electrophoresis (CE) has recently emerged as a highly promising technique consuming an extremely small amount of sample and capable of the rapid, high-resolution separation, characterization, and quantitation of analytes. CE has been used for the separation of biopolymers, including acidic carbohydrates. Since CE is basically an analytical method for ions, acidic carbohydrates that give anions in weakly acid, neutral, or alkaline media are often the direct objects of this method. The scope of this review is limited to the use of CE for the analysis of carbohydrates containing carboxylate, sulfate, and phosphate groups as well as neutral carbohydrates that have been derivatized to incorporate strongly acidic functionality, such as sulfonate groups.     

Detection of milk oligosaccharides in plasma of infants

Human milk oligosaccharides (HMO) are one of the major components of human milk. HMO are non-digestible by the human gut, where they are known to play important functions as prebiotics and decoys for binding pathogens. Moreover, it has been proposed that HMO may provide sialic acids to the infant that are important in brain development, however this would require absorption of HMO into the bloodstream. HMO have consistently been found in the urine of humans and other mammals, suggesting systemic absorption. Here, we present a procedure for the profiling of milk oligosaccharides (MO) in plasma samples obtained from 13 term infants hospitalized for surgery for congenital heart disease. The method comprises protein denaturation, oligosaccharide reduction, and porous graphitized carbon solid phase extraction for purification followed by analysis using nHPLC-PGC-chip-TOF-MS. Approximately 15 free MO were typically observed in the plasma of human infants, including LNT, LDFP, LNFT, 3′SL, 6′SL, 3′SLN, and 6′SLN, of which the presence was confirmed using fragmentation studies. A novel third isomer of SLN, not found in human or bovine milk was also consistently detected. Differences in the free MO profiles were observed between infants that were totally formula-fed and infants that received at least some part breast milk. Our results indicate that free MO similar in structure to those found in human milk and urine are present in the blood of infants. The method and results presented here will facilitate further research toward the possible roles of free MO in the development of the infant.     

Characterizing plant cell wall derived oligosaccharides using hydrophilic interaction chromatography with mass spectrometry detection

Analysis of complex mixtures of plant cell wall derived oligosaccharides is still challenging and multiple analytical techniques are often required for separation and characterization of these mixtures. In this work it is demonstrated that hydrophilic interaction chromatography coupled with evaporative light scattering and mass spectrometry detection (HILIC-ELSD-MS(n)) is a valuable tool for identification of a wide range of neutral and acidic cell wall derived oligosaccharides. The separation potential for acidic oligosaccharides observed with HILIC is much better compared to other existing techniques, like capillary electrophoresis, reversed phase and porous-graphitized carbon chromatography. Important structural information, such as presence of methyl esters and acetyl groups, is retained during analysis. Separation of acidic oligosaccharides with equal charge yet with different degrees of polymerization can be obtained. The efficient coupling of HILIC with ELSD and MS(n)-detection enables characterization and quantification of many different oligosaccharide structures present in complex mixtures. This makes HILIC-ELSD-MS(n) a versatile and powerful additional technique in plant cell wall analysis.     

Borate complexation-assisted field-enhanced sample injection for on-line preconcentration of cis-diol-containing compounds in capillary electrophoresis

A new on-line preconcentration technique called borate complexation-assisted field-enhanced sample injection (BCA-FESI) was proposed for preconcentrating cis-diol-containing compounds (CDCCs) in capillary electrophoresis (CE). The principle relies on amplification of the difference in the electrophoretic mobilities of CDCC in sample matrix and background electrolyte (BGE) through complexation of CDCC with borate in a sample matrix of basic pH and dissociation of the complex in a BGE of acidic pH. Meanwhile, CDCC and borate ions electro-injected into the capillary are finally in neutral state, which maintains the pre-filled low conductivity zone and thus allows for longer injection time. With catechol as a test compound, the principle and effectiveness of BCA-FESI was verified. As compared to conventional sample injection, BCA-FESI allowed for sensitivity enhancement of 1850-fold. The established method was further evaluated with three catechins, including (−)-epicatechin gallate (ECG), (−)-gallocatechin gallate (GCG), and (−)-epigallocatechin (EGC), in a standard mixture of trace content. The limit of detection (LOD) was found to be 1.4, 3.8, 17.5 nM (S/N = 3) for ECG, GCG, EGC, respectively. Finally, the BCA-FESI method was applied to a real sample of diluted tea beverage, in which the three catechins were detected.     

Characterization of humic substances by capillary electrophoresis

Capillary electrophoresis was used for the separation of humic acid (HA) from peat, soil, and vermicompost. The electropherograms show the presence of at least three peaks eluted between 6 and 11 min for all HA. The best analysis resolution was obtained with the use of borate buffers at pH 8.9. The HA analyzed have structural and charge similarity, which increases the difficulty of separation. Therefore, the shape of the peaks is broad and the CE profiles of all HA are similar. It is reasonable to assume that the broad band in the three regions is due to the acidic groups that have a similar structure. By comparing the results obtained for HA extracted from soil, peat, vermicompost, and the commercial sample, HA from peat had the major carbon content.     

Highly sensitive and selective separation of intact parathyroid hormone and variants by sheathless CE‐ESI‐MS/MS

Parathyroid hormone (PTH) is a common clinical marker whose quantification relies on immunoassays, giving variable results as batch, brand, or target epitope changes. Sheathless CE‐ESI‐MS, combining CE resolution power and low‐flow ESI sensitivity, was applied to the analysis of PTH in its native conformation in the presence of related forms. Fused silica and neutral‐coated capillaries were investigated, as well as preconcentration methods such as transient isotachophoresis, field‐amplified sample injection (FASI), and electrokinetic supercharging (EKS). The method for the separation of PTH and its variants was first developed using fused‐silica capillary with UV detection. An acidic BGE was used to separate 1–84 PTH (full length), 7–84 PTH, and 1–34 PTH. Acetonitrile was added to the BGE to reduce peptide adsorption onto the capillary wall and transient isotachophoresis was used as analyte preconcentration method. The method was then transferred to a sheathless CE‐ESI‐MS instrument. When using a fused silica capillary, CE‐MS was limited to μg/mL levels. The use of a neutral coating combined with FASI or EKS allowed a significant increase in sensitivity. Under these conditions, 1–84 PTH, 7–84 PTH, and 1–34 PTH were detected at concentrations in the low ng/mL (FASI) or pg/mL (EKS) range.     

Determination of the lactose content of fluid milk by spectrophotometric enzymatic analysis using weight additions and path length adjustment: collaborative study

The objective of this collaborative study was to determine the method performance characteristics of a spectrophotometric enzymatic assay for measuring the lactose content of fluid milk. The principle behind the method is similar to that of AOAC Method 984.15 but with significant modifications and added quality control. Additionally, lactose concentration is expressed on a weight/weight (wt/wt) rather than a weight/volume (wt/vol) basis. The principle of the method is the hydrolysis of lactose to D-glucose and D-galactose by beta-galactosidase, followed by the oxidation of beta-D-galactose by nicotinamide adenine dinucleotide (NAD+) in the presence of beta-galactose dehydrogenase. The reaction is catalyzed by the addition of aldose-l-epimerase, which accelerates the mutarotation of alphha-D-galactose to beta-D-galactose. The amount of reduced nicotinamide adenine dinucleotide (NADH) formed is measured at 340 nm and is proportional to the amount of lactose present. Important aspects of the assay include preparing the assay solution by weight (rather than volume), mixing the contents of the spectrophotometric cuvette without losing solution, inclusion of aldose-l-epimerase, specifying spectrophotometer characteristics, and accounting for the optical path length of the spectrophotometric cuvettes. In the collaborative study, 11 laboratories tested one lactose standard and 8 pairs of blind replicate raw, processed, and formulated milks with an anhydrous lactose content between 3.0-7.2%. Statistical performance, in units of g/100 g anhydrous lactose, for the milk materials within the applicability of the method was as follows: mean = 4.4040, Sr = 0.0130, SR = 0.0250, RSDr = 0.29%, RSDR = 0.57%, r = 0.0364, and R = 0.0700. Standard and marginal recoveries were 98.66 and 99.53%, respectively. Method performance represented a significant improvement over what would be achieved if path length was not accounted for or the assay was done volumetrically. The Study Directors recommend that the method for determination of the lactose content of fluid milk by the spectrophotometric enzymatic method using weight additions and path length adjustment be adopted Official First Action.     

Development of a gas diffusion probe for the rapid measurement of pCO2 in aquatic samples

A capillary electrophoresis (CE) procedure with contactless conductivity detection (C(4)D) has been developed for monitoring of neutral mono- and disaccharides in drinks and foodstuffs. The separation of a mixture of seven neutral saccharides (glucose, fructose, galactose, mannose, ribose, sucrose and lactose) employed a quartz capillary, 5 μm i.d., with an effective length of 18.3 cm, and 75 mM NaOH (pH 12.8) as the background electrolyte (BGE). The limit of detection (LOD) values obtained lied within a range from 0.4 μmol L(-1) for lactose to 0.9 μmol L(-1) for ribose, with a separation time shorter than 140 s. The procedure was successfully applied to determinations of saccharides in fruit juices, Coca-Cola, milk, red and white wines, yoghurts, honey and a foodstuff additive.     

Determination of pyridine and adenine nucleotide metabolites in Bacillus subtilis cell extract by sweeping borate complexation capillary electrophoresis

With a growing interest in new areas of bioanalytical research such as metabolome analysis, the development of sensitive capillary electrophoresis (CE) methods to analyze sub-microM concentrations of analytes in biological samples is required. In this report, the application of CE with sweeping by borate complexation is used to analyze a group of seven pyridine and adenine nucleotide metabolites derived from bacteria Bacillus subtilis cell extracts. Nanomolar (nM) detectability of analytes by CE with UV photometric detection is achieved through effective focusing of large sample plug (approximately 10% of capillary length) using sweeping by borate complexation method, reflected by a limit of detections (S/N = 3) of about 2 x 10(-8) M. Changes in metabolites concentrations were observed in cell extracts when using either glucose or malate as the carbon source in the culture medium. Concentration of pyridine and adenine nucleotides in cell extracts varied widely from 78.6 (+/-7.6) microM for nicotinamide-adenine dinucleotide in malate to 0.66 (+/-0.12) microM for nicotinamide-adenine dinucleotide phosphate in glucose culture medium. Concentrations of metabolites in a single cell were also estimated at millimolar (mM) level. The method was validated in terms of linearity, sensitivity and reproducibility. The application of CE by sweeping borate complexation allows for sensitive and reproducible analyses of nucleotide metabolites in complex biological samples such as bacteria cell extracts.     

A quantitative and comprehensive method to analyze human milk oligosaccharide structures in the urine and feces of infants

Human milk oligosaccharides (HMOs), though non-nutritive to the infant, shape the intestinal microbiota and protect against pathogens during early growth and development. Infant formulas with added galacto-oligosaccharides have been developed to mimic the beneficial effects of HMOs. Premature infants have an immature immune system and a leaky gut and are thus highly susceptible to opportunistic infections. A method employing nanoflow liquid chromatography time-of-flight mass spectrometry (MS) is presented to simultaneously identify and quantify HMOs in the feces and urine of infants, of which 75 HMOs have previously been fully structurally elucidated. Matrix-assisted laser desorption/ionization Fourier transform ion cyclotron resonance MS was employed for high-resolution and rapid compositional profiling. To demonstrate this novel method, samples from mother–infant dyads as well as samples from infants receiving infant formula fortified with dietary galacto-oligosaccharides or probiotic bifidobacteria were analyzed. Ingested oligosaccharides are demonstrated in high abundance in the infant feces and urine. While the method was developed to examine specimens from preterm infants, it is of general utility and can be used to monitor oligosaccharide consumption and utilization in term infants, children, and adults. This method may therefore provide diagnostic and therapeutic opportunities.

Surfactant‐coated graphitized multiwalled carbon nanotubes as the pseudostationary phase in electrokinetic chromatography for the analysis of phytochemical compounds in biological fluids

This report describes the use of surfactant‐coated graphitized multiwalled carbon nanotubes (SC‐GMWNTs) as a novel pseudostationary phase in CE with diode array detection for the determination of phenolic acids and tanshinones in herbal and urine samples. Several parameters influencing the separation were studied, such as the concentrations of SDS, GMWNTs, and isopropanol; choice of carbon nanotubes; sodium borate content; and buffer pH. The results revealed that the presence of SC‐GMWNTs in buffer enhanced the separation efficiency for the target analytes relative to conventional micelles due to the strong interaction between the surface of the GMWNTs and the target compounds. Under the optimum conditions, the method showed good linearity, with correlation coefficients higher than 0.9950. LODs were in the range of 0.71–3.10 μg/mL. Furthermore, satisfactory separations were achieved with good recovery values in the range of 89.97 and 103.30% when 10 mM borate, 30 mM SDS, 10% isopropanol, and 6 μg/mL SC‐GMWNTs were introduced into the buffer solution.     

Simultaneous determination of acidic and basic drugs using dual hollow fibre electromembrane extraction combined with CE

The simultaneous extraction of acidic and basic drugs from biological samples is a significant challenge for sample preparation. A novel and efficient method named dual hollow fibre electromembrane extraction combined with CE was applied for the simultaneous extraction and preconcentration of acidic and basic drugs in a single step. Under applied potential of 40 V during the extraction, ibuprofen as an acidic drug and thebaine as a basic drug migrated from a 4 mL aqueous sample solution at neutral pH into 20 μL of each basic (pH 12.5) and acidic (pH 2.0) acceptor phase, respectively; 1‐octanol and 2‐nitrophenyl octyl ether were immobilised in the pores of anodic and cathodic hollow fibres as supported liquid membranes, respectively. A Box–Behnken design and the response surface methodology were used for the optimisation of different parameters on the extraction efficiency. Under the optimised conditions, the enrichment factors were between 150 and 170 and also the LODs ranged from 3 to 7 ng/mL in different samples. The method was reproducible so that intra‐ and inter‐day RSDs% (n = 5) were less than 5.9%. Finally, the method was successfully applied for the simultaneous extraction and determination of acidic and basic drugs from plasma and urine samples.     

Conformational separation of monosaccharides of glycoproteins labeled with 2-aminoacrydone using microchip electrophoresis

The conformational separation of monosaccharides labeled with fluorescent 2-aminoacrydone (AMAC) was performed by electrophoresis on a plastic microchip with light-emitting diode confocal fluorescence detection. The AMAC-labeled five neutral monosaccharide mixture (D-glucose (Glc), D-mannose, D-galactose, L-fucose, and D-xylose) or two amino monosaccharide mixture (N-acetyl-D-glucosamine and N-acetyl-D-galactosamine) were well separated at pH 8.5 and 0.5% w/v methylcellulose of 200 mM borate buffer conditions using microchip electrophoresis. The separation was successfully performed considering the difference in stability of the complex between the hydroxyl residue of the monosaccharide and borate ions, and we found that 200 mM and pH 8.5 of borate buffer conditions were critical. High-speed separation for the neutral monosaccharides (50 s) and for amino monosaccharides (70 s) was attained at a 400 V/cm of electric field condition, showing all peak resolutions were greater than 0.9% and RSD of mobility were less than 1.9%. The detection limits of 0.86 microM for Glc and <1 microM for all other monosaccharides were enhanced with the addition of 0.5% w/v methylcellulose to the buffer. These attainments are fully compatible with conventional CE. The analysis of the subtle differences in the conformational stability and the value of the hydroxyl residue of the borate complex allowed the development of an efficient prospective tool for attaining high-resolution separation of monosaccharide mixtures having complicated and analogous conformations.