Capillary electrophoretic studies on quantum dots and histidine appended peptides self‐assembly

Herein, we designed four peptides appended with different numbers of histidine (His_n‐peptide). We launched a systematic investigation on quantum dots (QDs) and His_n‐peptide self‐assembly in solution using fluorescence coupled CE (CE‐FL). The results indicated that CE‐FL was a powerful method to probe how ligands interaction on the surface of nanoparticles. The self‐assembly of QDs and peptide was determined by the numbers of histidine. We also observed that longer polyhistidine tags (n ≤ 6) could improve the self‐assembly efficiency. Furthermore, the formation and separation of QD‐peptide assembly were also studied by CE‐FL inside a capillary. The total time for the mixing, self‐assembly, separation, and detection was less than 10 min. Our method greatly expands the application of CE‐FL in QDs‐based biolabeling and bioanalysis.     

Characterization and separation of semiconductor quantum dots and their conjugates by capillary electrophoresis

Semiconductor quantum dots (QDs) are very important luminescent nanomaterials with a wide range of potential applications. Currently, QDs as labeling probes are broadly used in bioassays, including immunoassay, DNA hybridization, and bioimaging, due to their excellent physical and chemical properties, such as broad excitation spectra, narrow and size‐dependent emission profiles, long fluorescence life time, and good photostability. The characterization of QDs and their conjugates is crucial for their wide bioapplications. CE has become a powerful tool for the separation and characterization of QDs and their conjugates. In this review, some CE separation models of QDs are first introduced, mainly including CZE, CGE, MEKC, and ITP. And then, some key applications, such as the measurements of size, surface charge, and concentration of QDs and the characterization of QDs conjugates (e.g. QD–protein, QD–DNA, QD–small molecule), are also described. Finally, future perspectives are discussed.     

Green synthesis and antibacterial effects of aqueous colloidal solutions of silver nanoparticles using clove eugenol

Silver nanoparticles were synthesized using clove extract (CE). Scanning transmission electron microscopy (STEM) revealed the morphology of the metallic Ag nanoparticles obtained via the clove extract synthesis (Ag NPs‐CE), which had a uniform distribution and average sizes varying from 10 nm to 100 nm. Fourier transform infra‐red (FTIR) spectroscopy showed that clove eugenol acts as a capping and reducing agent being adsorbed on the surface of Ag NPs‐CE, enabling their reduction from Ag⁺ and preventing their agglomeration. Formation of the Ag⁰ structure is also confirmed in the FTIR spectrum by the presence in the Ag NPs‐CE sample of the –C=O and –C=C vibrations at wavenumbers 1600 and 2915 cm^‐1, respectively. Antibacterial and antifungal tests using three strains of bacteria and one fungi strain showed that the Ag NPs‐CE performed better compared to pure clove extract (CE) sample.     

Interaction between water-soluble peptidic CdSe/ZnS nanocrystals and membranes: formation of hybrid vesicles and condensed lamellar phases

Due to their tunable optical properties and their well-defined nanometric size, core/shell nanocrystals (quantum dots, QDs) are extensively used for the design of biomarkers as well as for the preparation of nanostructured hybrid materials. It is thus of great interest to understand their interaction with soft lipidic membranes. Here we present the synthesis of water-soluble peptide CdSe/ZnS QDs and their interaction with the fluid lipidic membrane of vesicles. The use of short peptides results in the formation of small QDs presenting both high fluorescence quantum yield and high colloidal stability as well as a mean hydrodynamical diameter of 10 nm. Their interaction with oppositely charged vesicles of various surface charge and size results in the formation of hybrid giant or large unilamellar vesicles covered with a densely packed layer of QDs without any vesicle rupture, as demonstrated by fluorescence resonance energy transfer experiments, zetametry, and optical microscopy. The adhesion of nanocrystals onto the vesicle membrane appears to be sterically limited and induces the reversion of the surface charge of the vesicles. Therefore, their interaction with small unilamellar vesicles induces the formation of a well-defined lamellar hybrid condensed phase in which the QDs are densely packed in the plane of the layers, as shown by freeze-fracture electron microscopy and small-angle X-ray scattering. In this structure, strong undulations of the bilayer maximize the electrostatic interaction between the QDs and the bilayers, as previously observed in the case of DNA polyelectrolytes interacting with small vesicles.     

Recognition of DNA based on changes in the fluorescence intensity of CdSe/CD QDs–phenanthroline systems

The CdSe quantum dots (QDs) modified by mercapto-β-cyclodextrin (CD) were synthesized and characterized by transmission electron microscopy, powder X-ray diffraction, excitation and emission spectra, and fluorescence lifetime. When λ_ex = 370 nm, the fluorescence peak of CdSe/CD QDs is at 525 nm. Phenanthroline (Phen) is able to quench their fluorescence, which can be recovered by the addition of DNA. The quenching and restoration of fluorescence intensity were found to be linearly proportional to the amount of Phen and DNA, respectively. The variation of the fluorescence intensity of the CdSe/CD QDs–Phen system was studied, and it was demonstrated to result from a static mechanism due to the formation of a Phen inclusion complex with the CdSe QDs modified by mercapto-β-cyclodextrin. The fluorescence recovery was due to the binding of DNA with Phen in the inclusion complex, leading to the freeing of the CdSe/CD QDs. The binding constants and sizes of the binding sites of the Phen–DNA interaction were calculated to be 1.33 × 10⁷ mol^?1 L and 10.79 bp.     

Fabrication of hydrophilic luminescent zinc oxide quantum dots for selective detection of copper ions and efficient inhibition of harmful fungi

In this study, we have successfully prepared surface modified zinc oxide quantum dots (M-ZnO QDs) with ultra-stable fluorescence and excellent hydrophilicity through introducing (3-aminopropyl)triethoxysilane (APTES). The as-prepared M-ZnO QDs under the optimum condition presented strong yellow fluorescence emission under 355 nm excitation and showed satisfied reproducibility. Physical and chemical properties of the synthesized ZnO QDs were further studied by various characterization techniques. Transmission electron microscopy showed homogeneous distribution of spherical M-ZnO QDs with the average particle size of 4.03 nm. According to the characteristic that metal ions can quench fluorescence, M-ZnO QDs-based fluorescence sensor for the detection of Cu²⁺ in aqueous solution is developed in this work, which has the advantages of excellent selectivity, good sensitivity and a wide linear range. The limit of detection was 0.51 μM and the linear detection range was 1–200 μM for Cu²⁺ determination. The practicability of the fluorescent probe is further validated in the lake water and the satisfactory spiked recoveries of Cu²⁺ ranges from 99.1 % to 108.8 %. Besides, M-ZnO QDs displayed concentration inhibition effect and strain effect on the growth of fungi. Thus, the as-prepared M-ZnO QDs are demonstrated to be promising for Cu²⁺ determination and anti-fungal applications.     

Biomimetic Synthesis of Ag2Se Quantum Dots with Enhanced Photothermal Properties and as “Gatekeepers” to Cap Mesoporous Silica Nanoparticles for Chemo–Photothermal Therapy

Ag₂Se quantum dots (QDs) with near‐infrared (NIR) fluorescence have been widely utilized in NIR fluorescence imaging in vivo because of their narrow bulk band gap and excellent biocompatibility. However, most of synthesis methods for Ag₂Se QDs are expensive and the reactants are toxic. Herein, a new protein‐templated biomimetic synthesis approach is proposed for the preparation of Ag₂Se QDs by employing bovine serum albumin (BSA) as a template and dispersant. The BSA‐templated Ag₂Se QDs (Ag₂Se@BSA QDs) showed NIR fluorescence with high fluorescence quantum yield (≈21.2 %), excellent biocompatibility and good dispersibility in different media. Moreover, the obtained Ag₂Se@BSA QDs exhibited remarkable photothermal conversion (≈27.8 %), which could be used in photothermal therapy. As a model application in biomedicine, the Ag₂Se@BSA QDs were used as “gatekeepers” to cap mesoporous silica nanoparticles (MSNs) by means of electrostatic interaction. By taking the advantages of NIR fluorescence and photothermal property of Ag₂Se@BSA QDs, the obtained MSN‐DOX‐Ag₂Se nanoparticles (MDA NPs) were employed as a nanoplatform for combined chemo‐photothermal therapy. Compared with free DOX and MDA NPs without NIR laser, the laser‐treated MDA NPs exhibited lower cell viability in vitro, implying that Ag₂Se@BSA QDs are highly promising photothermal agents and the MDA NPs are potential carriers for chemo–photothermal therapy.     

Probing the mechanism of the interaction between l‐cysteine‐capped‐CdTe quantum dots and Hg2+ using capillary electrophoresis with ensemble techniques

A good understanding of the mechanism of interaction between quantum dots (QDs) and heavy metal ions is essential for the design of more effective sensor systems. In this work, CE was introduced to explore how l ‐cysteine‐capped‐CdTe QDs (l ‐cys‐CdTe QDs) interacts with Hg²⁺. The change in electrophoretic mobility can synchronously reflect the change in the composition and property of QDs. The effects of the free and capping ligands on the system are discussed in detail. ESI‐MS, dynamic light scattering (DLS), zeta potential, and fluorescence (FL) were also applied as cooperative tools to study the interaction mechanism. Furthermore, the interaction mechanism, which principally depended on the concentration of Hg²⁺, was proposed reasonably. At the low concentration of Hg²⁺, the formation of a static complex between Hg²⁺ and the carboxyl and amino groups of l ‐cys‐CdTe QDs surface was responsible for the FL quenching. With the increase of Hg²⁺ concentration, the capping l ‐cys was stripped from the surface of l ‐cys‐CdTe QDs due to the high affinity of Hg²⁺ to the thiol group of l ‐cys. Our study demonstrates that CE can reveal the mechanism of the interaction between QDs and heavy metal ions, such as FL quenching.     

Versatile Tri(pyrazolyl)phosphanes as Phosphorus Precursors for the Synthesis of Highly Emitting InP/ZnS Quantum Dots

Tri(pyrazolyl)phosphanes ( 5 ^R1,R2) are utilized as an alternative, cheap and low‐toxic phosphorus source for the convenient synthesis of InP/ZnS quantum dots (QDs). From these precursors, remarkably long‐term stable stock solutions (>6 months) of P(OLA)₃ (OLAH=oleylamine) are generated from which the respective pyrazoles are conveniently recovered. P(OLA)₃ acts simultaneously as phosphorus source and reducing agent in the synthesis of highly emitting InP/ZnS core/shell QDs. These QDs are characterized by a spectral range between 530–620 nm and photoluminescence quantum yields (PL QYs) between 51–62 %. A proof‐of‐concept white light‐emitting diode (LED) applying the InP/ZnS QDs as a color‐conversion layer was built to demonstrate their applicability and processibility.     

Study on the interaction between CdSe quantum dots and chitosan by scattering spectra

Two different stabilizing agents thioglycolic acid (TGA) and l-cysteine (l-Cys) capped CdSe QDs with the diameter of 2 nm were synthesized, large amounts of stabilizing agents connected to CdSe QDs surface through Cd–S bond. The interaction between chitosan and QDs had been investigated, respectively. The interaction lead to the remarkable enhancement of RRS, RNLS and the enchantments were in proportional to the concentration of chitosan in a certain range. Under the optimal conditions, compared with TGA–CdSe QDs, the interaction between l-Cys–CdSe QDs with chitosan owned more broad linear range 0.042–3.0 μg mL⁻¹ and lower detect limits 1.2 ng mL⁻¹. The influences of factors on the interaction between chitosan with QDs and some foreign substances were all examined, which showed that the methods had a good sensitivity and selectivity. Based on this, it is hoped to build a method for the determination of chitosan using CdSe QDs as probes. Through Fourier transform infrared spectroscopy (FTIR) transmission electron microscopy (TEM), it was speculated that CdSe QDs interacted with chitosan to form a network structure aggregates through electrostatic attraction and hydrophobic forces. The reasons for the enhancement of RRS intensity were assumed as follows: resonance enhanced Rayleigh scattering effect, increase of the molecular volume, and hydrophobic effect.     

ssDNA-QDs/GO multicolor fluorescence system for synchronous screening of hepatitis virus DNA

Viral hepatitis is a common infectious disease caused by five viruses (hepatitis virus A, B, C, D, and E). Given the diversity of hepatitis virus, rapid screening and accurate typing of viral hepatitis are the prerequisites for hepatitis therapy. Here, a multicolor fluorescence system was constructed by combining with the multi-color fluorescence properties of CdSe/ZnS quantum dots (QDs, emission wavelengths: 525 nm, 585 nm and 632 nm) and the broad-spectrum fluorescence quenching performance of GO. Taking advantage of the specific recognition of ssDNA modified CdSe/ZnS QDs to target hepatitis virus DNA, the constructed system could effectively distinguish hepatitis A virus DNA (HAV-DNA), hepatitis B virus DNA (HBV-DNA), and hepatitis C virus DNA (HCV-DNA) in a homogeneous solution. Based on the different adsorption property of GO for ssDNA and dsDNA, the fluorescence Forster resonance energy transfer (FRET) process between ssDNA modified QDs and GO could be regulated. The fluorescence signal of the constructed system presented a sensitive response to HAV-DNA, HBV-DNA, and HCV-DNA content in the range of 1.0–192 nM, 8.0–192 nM, and 1.0–128 nM, respectively. The limit of detection for HAV-DNA, HBV-DNA, and HCV-DNA is 0.46 nM, 1.53 nM, and 0.58 nM. The constructed system can be used to screen hepatitis virus DNA in real samples, which provides an alternative strategy for rapid screening and diagnosis of viral hepatitis.     

Graphene and carbon quantum dots electrochemistry

Graphene and carbon quantum (QDs) dots exhibit interesting and well-defined properties owing to their quantum confinement. In this work, graphene QDs (G-QDs) and carbon QDs of size ~ 6 nm and ~ 2 nm, respectively, were prepared and their potential uses in electrochemistry and electrochemical sensing were subsequently investigated. It was discovered that the C-QDs surface displayed a faster electron transfer rate compared to the G-QDs following analyses with the ferro/ferricyanide redox probe. Studies were also carried out with redox biomarkers such as uric acid (UA) and ascorbic acid (AA), and it was found that while the C-QDs displayed electrocatalytic properties toward the oxidation of both UA and AA, the G-QDs seemed to only have an impact on AA, from the decrease in the oxidation peak potential. This work provides direct electrochemical comparison of the two latest frontiers of carbon nanomaterials and opens the way for their electrochemical sensing applications.     

One‐Pot Synthesis of CdSe Quantum Dots in Aqueous Solution for Biological Labeling

The one‐pot synthesis of water‐soluble and biologically compatible yellow CdSe quantum dots (QDs) featuring the use of glutathione (GSH) as the capping and reducing agent was achieved under aqueous conditions at 150 °C. The synthesized yellow CdSe QDs with quantum yield (QY) up to 20% exhibit zinc blende cubic structure particles with an average diameter of 4‐5 nm. It was found that both molar ratio of Se/Cd and reaction time had a significant effect on size distribution of GSH‐CdSe QDs. Meanwhile, the interaction of QDs bioconjugated to bovine hemoglobin (BHb) was studied by absorption and fluorescence(FL) spectra. With addition of BHb, the FL intensity of CdSe QDs largely quenched due to the static mechanism. The linear range is 5.0 × 10^?8 mol/L to 3.0 × 10^?6 mol/L, and the correlation coefficient is 0.9991, suggesting that could be used as a probe to label biological molecules and bacterial cells.     

Ultrafast synthesis of near-infrared-emitting aqueous CdTe/CdS quantum dots with high fluorescence

The traditional aqueous route to synthesis CdTe/CdS Core/shell (c/s) quantum dots (QDs) via decomposition of Cd-thiol complexes is usually time consuming. Herein, an ultrafast and facile aqueous synthetic approach under atmospheric pressure for CdTe/CdS c/s QDs with emission from the green to the near-infrared window (535–820 nm) is reported. With purified CdTe core QDs diluted in solution of Cd-3-mercaptopropionic acid (MPA) complexes, CdTe/CdS c/s QDs with emission wavelengths at 700 and 800 nm can be obtained within 20- and 45-min refluxing under the optimized experimental conditions, respectively. This is the most rapid way to prepare CdTe/CdS c/s QDs in aqueous phase, and the obtained QDs were highly luminescent without postsynthesis treatment. The influences of various experimental factors, including Cd²⁺ concentration, MPA-to-Cd ratio, pH value, and dilution ratio on the growth rate and luminescent properties of the obtained CdTe/CdS c/s QDs, have been taken into consideration. The three processes “purification-dilution-addition” ensure the synthesis environment with high pH value and low core concentration and have a marked impact on the rapid synthesis rate and the resulting high fluorescence of CdTe/CdS c/s QDs.     

Continuous‐Flow Synthesis of CdSe Quantum Dots: A Size‐Tunable and Scalable Approach

In recent years, continuous‐flow/microreactor processing for the preparation of colloidal nanocrystals has received considerable attention. The intrinsic advantages of microfluidic reactors have opened new opportunities for the size‐controlled synthesis of nanocrystals either in the laboratory or on a large scale. Herein, an experimentally simple protocol for the size‐tunable continuous‐flow synthesis of rather monodisperse CdSe quantum dots (QDs) is presented. CdSe QDs are manufactured by using cadmium oleate as cadmium source, selenium dioxide as selenium precursor, and 1‐octadecene as solvent. Exploiting selenium dioxide as selenium source and 1‐octadecene as solvent allows execution of the complete process in open air without any requirement for air‐free manipulations using a glove box or Schlenk line. Continuous‐flow processing is performed with a stainless steel coil of 1.0 mm inner diameter pumping the combined precursor solution through the reactor by applying a standard HPLC pump. The effect of different reaction parameters, such as temperature, residence time, and flow rate, on the properties of the resulting CdSe QDs was investigated. A temperature increase from 240 to 260 °C or an extension of the residence time from 2 to 20 min affords larger nanocrystals (range 3–6 nm) whereas the size distribution does not change significantly. Longer reaction times and higher temperatures result in QDs with lower quantum yields (range 11–28 %). The quality of the synthesized CdSe QDs was confirmed by UV/Vis and photoluminescence spectroscopy, small‐angle X‐ray scattering, and high‐resolution transmission electron microscopy. Finally, the potential of this protocol for large‐scale manufacturing was evaluated and by operating the continuous‐flow process for 87 min it was possible to produce 167 mg of CdSe QDs (with a mean diameter of 4 nm) with a quantum yield of 28 %.     

Study on molecular interactions between proteins on live cell membranes using quantum dot-based fluorescence resonance energy transfer

Mouse anti-human CD71 monoclonal antibody (anti-CD71) was conjugated with red quantum dots (QDs; 5.3 nm, emission wavelength λ _em = 614 nm) and used to label HeLa cells successfully. Then green QD-labeled goat anti-mouse immunoglobulin G (IgG; the size of the green QDs was 2.2 nm; λ _em = 544 nm) was added to bind the red-QD-conjugated anti-CD71 on the cell surface by immunoreactions. Such interaction between anti-CD71 and IgG lasted 4 min and was observed from the fluorescence spectra: the fluorescence intensity of the “red” peak at 614 nm increased by 32%; meanwhile that of the “green” one at 544 nm decreased by 55%. The ratio of the fluorescence intensities (I _544 nm/I _614 nm) decreased from 0.5 to 0.2. The fluorescence spectra as well as cell imaging showed that fluorescence resonance energy transfer took place between these two kinds of QDs on the HeLa cells through interactions between the primary antibody and the secondary antibody.     

Zein films with ZnO and ZnO:Mg quantum dots as functional nanofillers: New nanocomposites for food package with UV-blocker and antimicrobial properties

The preparation of a new nanocomposite by combining zein and quantum dots (QDs) was the main interest of the present work. By the sol-gel method, colloidal ethanolic dispersions of zinc oxide (ZnO) particles and ZnO particles doped with magnesium (II) (ZnO:Mg) were obtained, sized 4.26 and 3.65 nm, respectively, as determined by UV–Vis spectroscopy. The prepared QDs were used as nanofillers in order to obtain zein-based nanocomposite films, which displayed good visual appearance, homogeneity, and transparency. The presence of QDs increased the hydrophobicity and reduced, up to three times, the amount of water uptake of the composite films when compared to pure zein. Those effects were more pronounced for ZnO:Mg QDs. TEM, FTIR, and fluorescence microscopy analysis indicated that zein interacts more effectively with ZnO:Mg than with ZnO. In addition, and most importantly, the presence of QDs in the films showed an important advantage when compared to those of pure zein: the extended UV-blocking in the absorbance spectra. The antimicrobial assays demonstrated that the ZnO NPs, loaded into zein films, are promising antibacterial materials since the inhibition of growth of S. aureus reached (96.5 ± 4.9)% at 44.8 wt% of ZnO NPs. Therefore, the nanocomposites show promising features for the development of food packaging, UV protective films, and for the development of new and sustainable materials.     

Study of Streptavidin-Modified Quantum Dots by Capillary Electrophoresis

Great boom of nanotechnologies impacts almost all areas of science and therefore detail understanding of the properties of nanomaterials as well as their interaction abilities is required. Surface modification and functionalization of nanoparticles is of a great interest due to the wide range of applications in the area of nanomedicine, nanobiology, and/or biochemistry. In this study, CdTe QDs were synthesized using microwave reactor and their surface was modified by streptavidin to ensure further suitability for bioconjugation with biotin-labelled oligonucleotides. For characterization of the synthesized QDs and for monitoring of the interaction with the oligonucleotide, capillary and gel electrophoresis was used. Moreover, complementary advantages of absorption (CE–UV) and laser-induced fluorescence detection (CE–LIF) were exploited. Comparison the electrophoretic mobilities obtained for streptavidin-modified QDs by CE–LIF (?9.87 × 10^?9 m²/V/s) and by CE–UV (?10.02 × 10^?9 m²/V/s) was in a good agreement enabling us to identify the peak of streptavidin-modified QDs in the CE–UV electropherogram containing also the peak of unreacted streptavidin. Subsequent conjugation of streptavidin-modified QDs with two model biotinylated oligonucleotides (BCL-2 and HBV) led to formation of the complex represented in the electropherograms as a very sharp peak. This peak height increased with time for 15.5 and 27 mAU using BCL-2 oligonucleotide and HBV oligonucleotide, respectively during 30 min interaction.     

Quantitative analysis of a ubiquitin‐dependent substrate using capillary electrophoresis with dual laser‐induced fluorescence

Protein degradation by the ubiquitin‐proteasome system (UPS) affects many biological processes. Inhibition of the proteasome has emerged as a potential therapeutic target for cancer treatment. In this study, we developed a method for monitoring the degradation and accumulation of UPS‐dependent substrates in cells using CE with dual LIF. We used a green fluorescent protein (GFP)‐fusion of the ubiquitin substrate ribophorin 1 (GFP‐RPN1) along with red fluorescent protein (RFP) as an internal control to normalize transfection efficiency. Determination of GFP‐RPN1 and RFP in cell lysates were performed in an untreated capillary (75 μm × 50 cm) and 100 mM Tris‐CHES buffer (pH 9.0) containing 10 mM SDS. GFP‐RPN1 and RFP fluorescence were detected at excitation wavelengths of 488 and 635 nm, and emission wavelengths of 520 and 675 nm, respectively, without any interference or crosstalk. The intensity of GFP‐RPN1 fluorescence was normalized to that of RFP. Additionally, the proposed approach was used successfully to detect the degradation of GFP‐RPN1 and evaluate proteasome inhibitors. These results show that the developed method is effective and promising for rapid and quantitative monitoring of UPS‐dependent substrates compared to the current common methods, such as immunoblotting and pulse chase assays.     

Capillary electrophoresis immunoassays with conjugated quantum dots

Water-soluble CdTe quantum dots (QDs) and their conjugates with antibodies and antigenes were prepared by optimized procedures for applications in CE immunoassays. The QD size of 3.5 nm, excitation spectrum in the range of 300-500 nm, the maximum wavelength of the emission spectrum at 610 nm, quantum yield of 0.25 and luminescence lifetimes in the range of 3.6-43 ns were determined. The 0.1 M solution of TRIS/TAPS (pH 8.3) was found to be the optimum buffer for the separation of the antiovalbumin-ovalbumin immunocomplex from the free conjugates of QDs.