Oxygen Reduction on Anthraquinone Diazonium Compound Derivatised Multi‐walled Carbon Nanotube and Graphene Based Electrodes

In this work, graphene and multi‐walled carbon nanotubes were derivatised with anthraquinone (AQ) groups using spontaneous or electrochemical grafting of Fast Red AL salt. Glassy carbon (GC) electrodes were coated with AQ‐modified carbon nanomaterials to study the oxygen reduction reaction (ORR). These nanomaterials were characterised by X‐ray photoelectron spectroscopy and multilayer formation of AQ on the electrografted electrodes was observed. All the modified electrodes showed enhanced electrocatalytic activity towards the ORR in alkaline media. High AQ loading on the electrodes was found and the number of electrons transferred per O₂ molecule was between 2 and 4. In addition, the stability testing of AQ‐derivatised carbon nanomaterial‐coated GC electrodes was performed.     

Influence of Metal Nanoparticles on the Electrocatalytic Oxidation of Glucose by Poly(NiIIteta) Modified Electrodes

Conductive polymeric [Ni^II(teta)]²⁺ (teta=C‐meso‐5,5,7,12,12,14‐hexamethyl‐1,4,8,11‐tetra‐azacyclotetradecane) films (poly(Ni)) have been deposited on the surface of glassy carbon (GC), Nafion (Nf) modified GC (GC/Nf) and Nf stabilized Ag and Au nanoparticles (NPs) modified GC (GC/Ag‐Nf and GC/Au‐Nf) electrodes. The cyclic voltammogram of the resulting electrodes, show a well defined redox peak due to oxidation and reduction of poly(Ni) system in 0.1 M NaOH. They show electrocatalytic activity towards the oxidation of glucose. AFM studies reveal the formation of poly(Ni) film on the modified electrodes. Presence of metal NPs increases electron transfer rate and electrocatalytic oxidation current by improving the communication within the Nf and poly(Ni) films. In the presence of metal NPs, 4 fold increase in current for glucose oxidation was observed.     

Blocking Behavior of Covalently Attached Anthraquinone Towards Solution‐Based Redox Probes

The electrochemical properties of glassy carbon (GC) electrodes modified with 9,10‐anthraquinone (AQ) have been investigated. Electrografting of GC surface was carried out from the solution of the AQ diazonium derivative. The blocking action of GC/AQ electrodes for Fe(CN)$\rm{{_{6}^{3-}}}$ and Ru(NH₃)$\rm{{_{6}^{3+}}}$ redox probes was studied using cyclic voltammetry (CV) and the rotating disk electrode (RDE) method. It was established that the extent of blocking was a function of AQ surface concentration. A peculiar behavior was observed at the potentials of AQ reduction.     

Electrochemical Quartz Crystal Impedance Study of Glucose Oxidation on a Nickel Hydroxide Modified Au Electrode in Alkaline Solution

The electrochemical quartz crystal impedance (EQCI) technique has been applied to investigate glucose oxidation on bare and Ni(OH)₂‐modified Au electrodes in 0.2 mol L^?1 KOH aqueous solution. The EQCI responses suggest different contributions of H⁺‐release and OH^?‐incorporation reactions of the Ni(OH)₂‐film redox process in 0.2 mol L^?1 aqueous KOH at different potentials. Glucose adsorption on the Ni(OH)₂‐modified Au electrode was studied. A mechanism for potential cyclic redox process of glucose at Ni(OH)₂‐modified Au electrode is suggested, mainly based on a comparative EQCI analysis with direct glucose oxidation on bare gold and glucose ad‐/desorption on Ni(OH)₂ film.     

Electrochemical Modification of Gold Electrodes with Azobenzene Derivatives by Diazonium Reduction

An electrochemical study of Au electrodes electrografted with azobenzene (AB), Fast Garnet GBC (GBC) and Fast Black K (FBK) diazonium compounds is presented. Electrochemical quartz crystal microbalance, ellipsometry and atomic force microscopy investigations reveal the formation of multilayer films. The elemental composition of the aryl layers is examined by X‐ray photoelectron spectroscopy. The electrochemical measurements reveal a quasi‐reversible voltammogram of the Fe(CN)₆^3?/4? redox couple on bare Au and a sigmoidal shape for the GBC‐ and FBK‐modified Au electrodes, thus demonstrating that electron transfer is blocked due to the surface modification. The electrografted AB layer results in strongest inhibition of the Fe(CN)₆^3?/4? response compared with other aryl layers. The same tendencies are observed for oxygen reduction; however, the blocking effect is not as strong as in the Fe(CN)₆^3?/4? redox system. The electrochemical impedance spectroscopy measurements allowed the calculation of low charge‐transfer rates to the Fe(CN)₆^3? probe for the GBC‐ and FBK‐modified Au electrodes in relation to bare Au. From these measurements it can be concluded that the FBK film is less compact or presents more pinholes than the electrografted GBC layer.     

Oxygen electroreduction on anthraquinone-modified nickel electrodes in alkaline solution

The electrochemical reduction of oxygen has been studied on anthraquinone (AQ) modified nickel electrodes in 0.1 M KOH solution using the rotating disk electrode (RDE) technique. Modification of the Ni electrode surface with AQ by electrochemical reduction of the corresponding diazonium salt was carried out in two different media (in acetonitrile and in aqueous acidic solution). The AQ-modified Ni electrodes showed a good electrocatalytic activity for O₂ reduction. The RDE data indicate that the reduction of oxygen on Ni/AQ electrodes proceeds by a two-electron pathway in alkaline solution. The O₂ reduction results obtained for Ni/AQ electrodes are compared with those of AQ-modified glassy carbon electrodes.     

Fabrication of Chitosan‐Multiwall Carbon Nanotube Nanocomposite Containing Ferri/Ferrocyanide: Application for Simultaneous Detection of D‐Penicillamine and Tryptophan

We report a simple and effective strategy for fabrication of the nanocomposite containing chitosan (CS) and multiwall carbon nanotube (MWNT) coated on a glassy carbon electrode (GCE). The characterization of the modified electrode (CS‐MWNT/GC) was carried out using scanning electron microscopy (SEM) and UV–vis absorption spectroscopy. The electrochemical behavior of CS‐MWNT/GC electrode was investigated and compared with the electrochemical behavior of chitosan modified GC (CS/GC), multiwalled carbon nanotube modified GC (MWNT/GC) and unmodified GC using cyclic voltammetry (CV) and electron impedance spectroscopy (EIS). The chitosan films are electrochemically inactive; similar background charging currents are observed at bare GC. The chitosan films are permeable to anionic Fe(CN)₆^3?/4? (FC) redox couple. Electrochemical parameters, including apparent diffusion coefficient for the Fe(CN)₆^3?/4? redox probe at FC/CS‐MWNT/GC electrode is comparable to values reported for cast chitosan films. This modified electrode also showed electrocatalytic effect for the simultaneous determination of D‐penicillamine (D‐PA) and tryptophan (Trp). The detection limit of 0.9 μM and 4.0 μM for D‐PA and Trp, respectively, makes this nanocomposite very suitable for determination of them with good sensitivity.     

An enhanced Nonenzymatic Electrochemical Glucose Sensor Based on Copper‐Palladium Nanoparticles Modified Glassy Carbon Electrodes

Novel copper‐palladium nanoparticles modified glassy carbon electrodes (Cu−Pd/GC) with enhanced nonenzymatic sensing for glucose were facilely prepared by one‐step electrodeposition. The structure and composition of the prepared nanoparticles were characterized by XRD, SEM, TEM and EDS, respectively. The electrode modified process was characterized by electrochemical impedance spectroscopy. Cyclic voltammetry and chronoamperometric experiments were used to evaluate the electrocatalytic activities of the electrodes toward glucose. The surface morphology and the electrocatalytic activities of Cu−Pd/GC was compared to Pd and Cu nanoparticles modified glassy carbon electrodes (Pd/GC and Cu/GC), respectively. Thanks to homogeneous distribution of Cu−Pd nanoparticles and the synergistic effect of Cu and Pd atoms, Cu−Pd/GC exhibited the highest sensitivity (298 μA mM⁻¹ cm⁻²) and the widest linear amperometric response (0.01 mM to 9.6 mM, R²=0.996) toward glucose compared to Pd/GC and Cu/GC. The detection limit of Cu−Pd/GC was 0.32 μM (S/N=3). In addition, the as‐prepared Cu−Pd/GC glucose sensor also exhibited exceptional capabilities of anti‐interference, reproducibility and long‐term stability. The as‐prepared sensor was also evaluated for determination of glucose concentration in human blood serum samples, which exhibited high reliability and accuracy, having great potential in clinical application.     

Properties of Poly(sodium 4‐styrenesulfonate)‐Ionic Liquid Composite Film and Its Application in the Determination of Trace Metals Combined with Bismuth Film Electrode

A new kind of bismuth film modified electrode to sensitively detect trace metal ions based on incorporating highly conductive ionic liquids 1‐butyl‐3‐methyl‐imidazolium hexafluorophosphate (BMIMPF₆) in solid matrices at glassy carbon (GC) was investigated. Poly(sodium 4‐styrenesulfonate) (PSS), silica, and Nafion were selected as the solid matrices. The electrochemical properties of the mixed films modified GC were evaluated. The electron transfer rate of Fe(CN)₆^4?/Fe(CN)₆^3? can be effectively improved at the PSS‐BMIMPF₆ modified GC. The bismuth modified PSS‐BMIMPF₆ composite film electrodes (GC/PSS‐BMIMPF₆/BiFEs) displayed high mechanical stability and sensitive stripping voltammetric performances for the determination of trace metal cations. The GC/PSS‐BMIMPF₆/BiFE exhibited well linear response to both Cd(II) and Pb(II) over a concentration range from 1.0 to 50 μg L^?1. And the detection limits were 0.07 μg L^?1 for Cd(II) and 0.09 μg L^?1 for Pb(II) based on three times the standard deviation of the baseline with a preconcentration time of 120 s, respectively. Finally, the GC/PSS‐BMIMPF₆/BiFEs were successfully applied to the determination of Cd(II) and Pb(II) in real sample, and the results of present method agreed well with those of atomic absorption spectroscopy.     

Aqueous electrochemistry of binuclear copper complex with Robson-type ligand: dissolved versus surface-immobilized reactant

The electrochemical behaviour of binuclear copper complex with Robson-type ligand [Cu₂L]Cl₂ in aqueous medium is studied by cyclic voltammetry at highly oriented pyrolytic graphite, glassy carbon and gold electrodes. The overall reduction from solution of this reactant is found to be irreversible resulting in metallic copper formation. It is also complicated by chemical transformations of Cu(I) containing species. When attached to carbon support, [Cu₂L]Cl₂ is redox active in aqueous medium in the same potential range. The reduction is more reversible if reactant is immobilized at HOPG surface, and is in general agreement with reversible copper demetallation scheme. For dissolved reactant, the contribution of surface-attached species is screened by predominating voltammetric response of irreversible reduction. These conclusions are supported by data on the reduction of free protonated ligand and its hydrolysis products. Ex situ STM is applied to characterize electrode surfaces modified by [Cu₂L]Cl₂. Adsorbate monolayer of periodic structure is observed at highly oriented pyrolytic graphite (HOPG). Adsorption is more disordered at GC and less strong at polycrystalline gold support.     

Redox Properties of Ferricyanide Ion on Layer‐by‐Layer Thin Film‐Coated Gold Electrodes; Effects of Type of Polycationic Components in the Film

The surface of a gold (Au) electrode was coated with layer‐by‐layer (LbL) thin films composed of poly(vinyl sulfate) (PVS) and different type of poly(amine)s including poly(allylamine) (PAH), poly(ethyleneimine) (PEI) and poly(diallyldimethylammonium chloride) (PDDA) and redox properties of ferricyanide ion ([Fe(CN)₆]^3?) on the LbL film‐coated Au electrodes were studied. The LbL film‐coated electrodes exhibited redox response to [Fe(CN)₆]^3? ion when the outermost surface of the LbL film was covered with the cationic poly(amine)s while virtually no response was observed on the LbL film‐coated electrodes whose outermost surface was covered with PVS due to an electrostatic repulsion between [Fe(CN)₆]^3? ion and the negatively‐charged PVS layer. The redox properties of [Fe(CN)₆]^3? ion on the LbL film‐coated electrodes significantly depended on the type of polycationic materials in the LbL film. The LbL film‐coated electrodes which had been immersed in the [Fe(CN)₆]^3? solution for 15 min exhibited redox response even in a [Fe(CN)₆]^3? ion‐free buffer solution, suggesting that [Fe(CN)₆]^3? ion is confined in the films. In the buffer solution, redox peaks were observed between +0.1 and 0.4 V depending on the type of polycations in the film. Thus, [Fe(CN)₆]^3? ion can be confined in the film and the redox potential is polycation‐dependent.     

Electrocatalysis of Nitrate Reduction at Copper‐Nickel Alloy Electrodes in Acidic Media

The cathodic reduction of NO in 1.0 M HClO₄ is investigated by voltammetry at pure Ni and Cu electrodes, and three Cu‐Ni alloy electrodes of varying composition, all configured as rotated disks. Voltammetric data obtained using these hydrodynamic electrodes demonstrate significantly improved activity for NO reduction at Cu‐Ni alloy electrodes as compared to the pure Ni and Cu electrodes. This observation is explained on the basis of the synergistic benefit of different surface sites for adsorption of H‐atoms, generated by cathodic discharge of H⁺ at Ni‐sites, and adsorption of NO at Cu‐sites on these binary alloy electrodes. Koutecky‐Levich plots indicate that the cathodic response for NO at a Cu₇₅Ni₂₅ electrode corresponds to an 8‐electron reduction, which is consistent with production of NH₃. In comparison, the cathodic response at Cu₅₀Ni₅₀ and Cu₂₅Ni₇₅ electrodes corresponds to a 6‐electron reduction, which is consistent with production of NH₂OH. Flow injection data obtained using Cu₅₀Ni₅₀ and Cu₂₅Ni₇₅ electrodes with 100‐μL injections exhibit detection limits for NO of ca. 0.95 μM (ca. 95 pmol) and 0.60 μM (ca. 60 pmol), respectively.     

Electroless Deposition of Thionin onto Glassy Carbon Electrode Modified with Single Wall and Multiwall Carbon Nanotubes: Improvement of the Electrochemical Reversibility and Stability

A simple procedure was developed to prepare a glassy carbon electrode modified with carbon nanotubes (CNTs) and thionin. Abrasive immobilization of CNTs on a GC electrode was achieved by gently rubbing the electrode surface on a filter paper supporting carbon nanotubes, then immersing the GC/CNTs‐modified electrode into a thionin solution (electroless deposition) for a short period of time (5–50 s for MWCNTs and 5–120 s for SWCNTs ). Cyclic voltammograms of the resulting modified electrode show stable and a well defined redox couple with surface confined characteristic at wide pH range 2–12. The electrochemical reversibility and stability of modified electrode prepared with incorporation of thionin into CNTs film was compared with usual methods for attachment of thionin to electrode surfaces such as electropolymerization and adsorption on the surface of preanodized electrodes. The formal potential of redox couple (E°′) shifts linearly toward the negative direction with increasing solution pH. The surface coverage of thionin immobilized on CNTs glassy carbon electrode was approximately 1.95×10^?10 mol cm^?2 and 3.2×10^?10 mol cm^?2 for MWCNTs and SWCNTs, respectively. The transfer coefficient (α) was calculated to be 0.3 and 0.35 and heterogeneous electron transfer rate constants (K_s) were 65 s^?1 and 55 s^?1 for MWCNTs/thionin and SWCNTs/thionin‐modified GC electrodes, respectively. The results clearly show a great facilitation of the electron transfer between thionin and CNTs adsorbed on the electrode surface. Excellent electrochemical reversibility of redox couple, high stability, technically simple and possibility of preparation at short period of time are of great advantages of this procedure for modification of electrodes.     

Electrochemical Determination of L‐Lactate Using Phenylboronic Acid Monolayer‐Modified Electrodes

The surface of a gold (Au) disk electrode was modified with a self‐assembled monomolecular layer of dithiobis(4‐butylamino‐m‐phenylboronic acid) (DTBA‐PBA) to prepare L ‐lactate‐sensitive electrodes. The DTBA‐PBA‐modified electrodes exhibited an attenuated cyclic voltammogram (CV) for the Fe(CN)₆^3? ion in the presence of L ‐lactate, as a result of the formation of phenylboronate ester of L ‐lactate accompanied with the addition of OH^? ion to the boron atom. In other words, the negatively charged DTBA‐PBA monolayer blocked the electrode surface from the access of the Fe(CN)₆^3?/4? ions. Thus, the DTBA‐PBA monolayer‐modified Au electrode can be used for determining L ‐lactate on the basis of the change in redox current of Fe(CN)₆^3?/4? ions. The calibration graph useful for determining 1–30 mM L ‐lactate was obtained.     

Modification of Glassy Carbon Electrode With Single‐Walled Carbon Nanotubes and α‐Silicomolybdate: Application to Sb(III) Detection

A simple procedure was developed to prepare a glassy carbon (GC) electrode modified with single‐walled carbon nanotubes (SWCNTs) and polyoxometalate. With immersing SWCNTs modified GC electrode in silicon polyoxomolybdate (α‐SiMo₁₂O₄₀^4?) solution (direct deposition) for a short period of time (2–10 s) oxoanion adsorbed strongly and irreversibly on SWCNTs. Cyclic voltammograms of the α‐SiMo₁₂O₄₀^4? incorporated‐SWCNTs indicates three well‐defined and reversible redox couples with surface confined characteristic at wide pH range (1–7). The surface coverage (Γ) of α‐SiMo₁₂O₄₀^4? immobilized on SWCNTs was 2.14 (±0.11)×10^?9 mol cm^?2 indicating high loading ability of SWCNTs for polyoxometalate. The charge transfer rate constant (k_s) of three redox couples of adsorbed α‐SiMo₁₂O₄₀^4? were 9.20 (±0.20), 8.02 (±0.20), and 3.70 (±0.10) s^?1, respectively, indicate great facilitation of the electron transfer between α‐SiMo₁₂O₄₀^4? and CNTs. In this research the attractive mechanical and electrical characteristics of CNTs and unique properties and reactivity of polyoxometalates were combined. The modified electrode in buffer solution containing Sb(III) shows a new redox system at 0.38 V in pH 1. The voltammetric peak current increased with increasing Sb(III) concentration. The differential pulse voltammetry (DPV) technique was used for detection micromolar concentration of antimony. Furthermore, the interference effects various electroactive compounds on voltammetric response of Sb(III) were negligible. Finally the ability of the modified electrode for antimony detection in real samples was evaluated.     

An Air‐breathing Carbon Cloth‐based Screen‐printed Electrode for Applications in Enzymatic Biofuel Cells

We report a prototype air‐breathing carbon cloth‐based electrode that was fabricated starting from a commercially available screen‐printed electrode equipped with a transparent ITO working electrode (DropSens, ref. ITO10). The fabrication of the air‐breathing electrodes is straightforward, shows satisfactory reproducibility and a good electrochemical response as evaluated by means of [Fe(CN)₆]^3?/4? voltammetry. The gas‐diffusion electrodes were successfully modified with the O₂ reducing enzyme bilirubin oxidase from Myrothecium verrucaria in a direct electron transfer regime. The enzyme modified electrodes showed a remarkable high current density for O₂ reduction in passive air‐breathing mode of up to 5 mA cm^?2. Moreover, the enzyme modified electrodes were applied as O₂ reducing biocathodes in a glucose/air enzymatic biofuel cell in combination with a high current density glucose oxidase/redox polymer bioanode. The biofuel cell provides a high maximum power density of (0.34±0.02) mW cm^?2 at 0.25 V. The straightforward design, low cost and the high reproducibility of these electrodes are considered as basis for standardized measurements under gas‐breathing conditions and for high throughput screening of gas converting (bio‐)catalysts.     

The Determination of Methanol Using an Electrolytically Fabricated Nickel Microparticle Modified Boron Doped Diamond Electrode

A nickel modified boron doped diamond (Ni‐BDD) electrode and nickel foil electrode were used in the determination of methanol in alkaline solutions. The Ni‐BDD electrode was electrodeposited from a 1 mM Ni(NO₃)₂ solution (pH 5), followed by repeat cycling in KOH. Subsequent analysis utilised the Ni(OH)₂/NiOOH redox couple to electrocatalyse the oxidation of methanol. Methanol was determined to limits of 0.3 mM with a sensitivity of 110 nA/mM at the Ni‐BDD electrode. The foil electrode was less sensitive achieving a limit of 1.6 mM and sensitivity of 27 nA/mM. SEM analysis of the electrodes found the Ni‐BDD to be modified by a quasi‐random microparticle array.     

Electrochemical Studies of Thiol Self‐Assembled Monolayers at a Heated Gold‐Wire Microelectrode

Mercaptoundecanoic acid (MUA) and glutathione (GSH) self‐assembled monolayers were prepared on gold‐ wire microelectrode. Cyclic voltammetry was used to investigate the influence of temperature on electrochemical behaviors of Fe(CN)₆^3?/4? and Ru(NH₃)₆^3+/2+ at these SAMs modified electrodes in aqueous solution. It is found that temperature shows great influence on electron transfer (ET) and mass transport (MT) for the two SAMs modified electrodes and the influence of temperature depends on the charge properties of the redox couples and terminal groups of SAMs and the structure of the monolayer on gold surface. The temperature can greatly increase MT rate of Fe(CN)₆^3?/4? at both MUA and GSH modified electrodes. However, the increased MT rate doesn't have any effect on the CV's for Fe(CN)₆^3?/4? /MUA system. For Ru(NH₃)₆^3+/2+ , temperature can greatly improve the electrochemical reaction in both MUA and GSH modified electrodes, which is ascribed to temperature‐induced diffusion and convection and the electrostatic interaction between Ru(NH₃)₆^3+/2+ and negatively charged carboxyl groups on the electrode surface.     

Preparation,Characterization, and Electrocatalytic Properties of Cobalt Oxide and Cobalt Hexacyanoferrate Hybrid Films

Polynuclear mixed‐valent films of cobalt oxide and cobalt hexacyanoferrate (CoOCoHCF) have been deposited on electrode surfaces from a solution of Co²⁺ and Fe(CN)₆^3? ions by repetitive potential cycling method. Simultaneous cyclic voltammetry and electrochemical quartz crystal microbalance measurements demonstrate the steady growth of modified film. The effect of type of monovalent cations as well as acidity of the supporting electrolyte on film growth and redox behavior of resulting film was investigated. In pure supporting electrolyte, electrochemical responses of modified electrode resemble with that of a surface immobilized redox couple. The hybrid film electrodes showed electrocatalytic activity toward oxidation of NADH, hydrazine and hydroxylamine. The feasibility of using our modified electrodes for analytical application was also explored.