In‐gel equilibration for improved protein retention in 2DE‐based proteomic workflows

The 2DE is a powerful proteomic technique, with excellent protein separation capabilities where intact proteins are spatially separated by pI and molecular weight. 2DE is commonly used in conjunction with MS to identify proteins of interest. Current 2DE workflow requires several manual processing steps that can lead to experimental variability and sample loss. One such step is the transition between first dimension IEF and second‐dimension SDS‐PAGE, which requires exchanging denaturants and the reduction and alkylation of proteins. This in‐solution‐based equilibration step has been shown to be rather inefficient, losing up to 30% of the original starting material through diffusion effects. We have developed a refinement of this equilibration step using agarose stacking gels poured on top of the second‐dimension SDS‐PAGE gel, referred to as in‐gel equilibration. We show that in‐gel equilibration is effective at reduction and alkylation in SDS‐PAGE gels. Quantification of whole‐cell extracts separated on 2DE gels shows that in‐gel equilibration increases protein retention, decreased intergel variability, and simplifies 2DE workflow.     

Evaluation of extraction procedures for 2‐DE analysis of aphid proteins

Protein sample preparation is a crucial step in a 2‐DE proteomics approach. In order to establish a routine protocol for the application of proteomics analysis to aphids, this study focuses on the specific protein extraction problems in insect tissues and evaluates four methods to bypass them. The approaches of phenol extraction methanol/ammonium acetate precipitation (PA), TCA/acetone precipitation, PEG precipitation, and no precipitation were evaluated for proteins isolation and purification from apterous adult aphids, Sitobion avenae. For 2‐DE, the PA protocol was optimal, resulting in good IEF and clear spots. PA method yielded the greatest amount of protein and displayed most protein spots in 2‐DE gels, as compared with the TCA/acetone precipitation, PEG precipitation and no precipitation protocols. Analysis of protein yield, image quality and spot numbers demonstrate that the TCA/acetone precipitation protocol is a reproducible and reliable method for extracting proteins from aphids. The PEG precipitation approach is a newly developed protein extraction protocol for aphids, from which more unique protein spots can be detected, especially for detection of acid proteins. These protocols are expected to be applicable to other insects or could be of interest to laboratories involved in insect proteomics, despite the amounts and types of interfering compounds vary considerably in different insects.     

A novel method of protein extraction from perennial Bupleurum root for 2-DE

The perennial Bupleurum root is thick and woody and contains high levels of interfering compounds. Common protein extraction methods have proved refractory towards the isolation of proteins suitable for 2-DE, due to the presence of interfering compounds. A novel method for extracting proteins suitable for 2-DE was established to overcome these problems. The main characteristic of this protocol is the partitioning of the proteins into the aqueous (fraction A-2), chloroform and isoamyl alcohol phases (A-3), and the interphase (A-1). The proteins are then extracted from each of these phases. From A-1, 85% (extracted protein against total proteins) proteins could be extracted and purified. For fraction A-2, a novel phenol extraction step is employed for the extraction of proteins. Based on the well-resolved 2-DE patterns, our protein preparation is free of interfering compounds. Using these methods (A-1, A-2, and A-3-3), a total of 3662 (1526 + 1128 + 1008) spots could be separated, and a protein yield of about 1.41 mg per 1.0 g fresh root material was obtained. To our knowledge, this is the first time that a protocol for protein extraction from perennial Bupleurum root has been reported that gives reproducible results. The protocol is expected to be applicable to other recalcitrant plant tissues as well.     

Combination of virtual and experimental 2DE together with ESI LC‐MS/MS gives a clearer view about proteomes of human cells and plasma

Virtual and experimental 2DE coupled with ESI LC‐MS/MS was introduced to obtain better representation of the information about human proteome. The proteins from HEPG2 cells and human blood plasma were run by 2DE. After staining and protein spot identification by MALDI‐TOF MS, the protein maps were generated. The experimental physicochemical parameters (pI/Mw) of the proteoforms further detected by ESI LC‐MS/MS in these spots were obtained. Next, the theoretical pI and Mw of identified proteins were calculated using program Compute pI/Mw ( http://web.expasy.org/compute_pi/pi_tool‐doc.html ). Accordingly, the relationship between theoretical and experimental parameters was analyzed, and the correlation plots were built. Additionally, virtual/experimental information about different protein species/proteoforms from the same genes was extracted. As it was revealed from the plots, the major proteoforms detected in HepG2 cell line have pI/Mw parameters similar to theoretical values. In opposite, the minor protein species have mainly very different from theoretical pI and Mw parameters. A similar situation was observed in plasma in much higher degree. It means that minor protein species are heavily modified in cell and even more in plasma proteome.     

Modified silver staining in 2DE improves protein detection even at extremely low sample concentration

The typical concentration of protein loaded varies from 0.13 to 1.40 μg/μL for a classical silver staining method in 2DE gel. Here, we present a simple modified classical silver staining method by modifying the silver impregnation and development reaction steps. This modified method detects the protein spots at extremely low loaded concentrations, ranging from 0.0048 to 0.0480 μg/μL. We recommend this modified silver staining as an excellent method for the limited biological samples used for silver‐stained 2DE analysis. Altogether, the protocol takes close to two days from first dimension separation to second dimension separation, followed by silver staining, scanning, and analysis.     

Analysis of E. coli soluble proteins by non‐denaturing micro 2‐DE/3‐DE and MALDI‐MS‐PMF

Escherichia coli (strain K‐12)‐soluble proteins were analyzed by nondenaturing micro 2‐DE and MALDI‐MS‐PMF. The reported conditions of nondenaturing IEF in agarose column gels [Jin, Y., Manabe, T., Electrophoresis 2009, 30, 939–948] were modified to optimize the resolution of cellular soluble proteins. About 300 CBB‐stained spots, the apparent molecular masses of which ranged from ca. 6000 to 10 kDa, were detected. All the spots on two reference 2‐DE gels (one for wide mass range and one for low‐molecular‐mass range) were numbered and subjected to MALDI‐MS‐PMF for the assignment of constituting polypeptides. Most of the spots (310 spots out of 329) provided significant match (p<0.05) with polypeptides in Swiss‐Prot database and totally 228 polypeptide species were assigned. Activity staining of enzymes such as alkaline phosphatase and catalases was performed on the 2‐DE gels and the locations of the activity spots matched well with those of the MS‐assigned polypeptides of the enzymes. Most of the polypeptides with subunit information in Swiss‐Prot (119 polypeptides as homo‐multimers and 25 as hetero‐multimers out of the 228), such as pyruvate dehydrogenase complex which is composed of three enzymatic components, were detected at the apparent mass positions of their polymers, suggesting that the proteins were separated retaining their subunit structures. When a nondenaturing 2‐DE gel was vertically cut into 2 mm strips and one of the strips was subjected to a third‐dimension micro SDS‐PAGE (micro 3‐DE), about 190 CBB‐stained spots were detected. The assignment of the polypeptides separated on the 3‐DE gel would further provide information on protein/polypeptide interactions.     

A simple protocol for protein extraction of recalcitrant fruit tissues suitable for 2-DE and MS analysis

Fruit tissues are considered recalcitrant plant tissue for proteomic analysis. Three phenol-free protein extraction procedures for 2-DE were compared and evaluated on apple fruit proteins. Incorporation of hot SDS buffer, extraction with TCA/acetone precipitation was found to be the most effective protocol. The results from SDS-PAGE and 2-DE analysis showed high quality proteins. More than 500 apple polypeptides were separated on a small scale 2-DE gel. The successful protocol was further tested on banana fruit, in which 504 and 386 proteins were detected in peel and flesh tissues, respectively. To demonstrate the quality of the extracted proteins, several protein spots from apple and banana peels were cut from 2-DE gels, analyzed by MS and have been tentatively identified. The protocol described in this study is a simple procedure which could be routinely used in proteomic studies of many types of recalcitrant fruit tissues.     

Improved dynamic range of protein quantification in silver‐stained gels by modelling gel images over time

Silver staining is a commonly used protein stain to visualise proteins separated by 2‐DE. Despite this, the technique suffers from a limited dynamic range, making the simultaneous quantification of high‐ and low‐abundant proteins difficult. In this paper we take advantage of the fact that silver staining is not an end‐point stain by photographing the gels during development. This procedure provides information about the change in measured absorbance for each pixel in the protein spots on the gel. The maximum rate of change was found to be correlated with the amount of applied protein, providing a new way of estimating protein amount in 2‐DE gels. We observed an improvement in the dynamic range of silver staining by up to two orders of magnitude.     

A CE‐based assay for human protein kinase CK2 activity measurement and inhibitor screening

A new assay for protein kinase CK2 activity determination based on the quantification of a phosphorylated substrate was developed. The common CK2 substrate peptide RRRDDDSDDD, conjugated with the fluorophore 5‐[(2‐aminoethyl)amino]naphthalene‐1‐sulfonic acid at the C‐terminus served as the analyte. By means of CZE using 2 mol/L acetic acid as electrolyte and UV detection at 214 nm, the non‐phosphorylated and the phosphorylated peptide variants could be resolved within 6 min from a complex assay mixture. By this means, activity of human CK2 could be monitored by a kinetic, as well as an endpoint, method. Inhibition of human recombinant CK2 holoenzyme by 6‐methyl‐1,3,8‐trihydroxyanthraquinone and 4,5,6,7‐tetrabromobenzotriazole resulted in IC₅₀ values of 1.33 and 0.27 μM, respectively, which were similar to those obtained with the standard radiometric assay. These results suggest that the CE/UV strategy described here is a straightforward assay for CK2 inhibitor testing.     

An efficient protein preparation for proteomic analysis of developing cotton fibers by 2-DE

Preparation of high-quality proteins from cotton fiber tissues is difficult due to high endogenous levels of polysaccharides, polyphenols, and other interfering compounds. To establish a routine procedure for the application of proteomic analysis to cotton fiber tissues, a new protocol for protein extraction was developed by optimizing a phenol extraction method combined with methanol/ammonium acetate precipitation. The protein extraction for 2-DE was remarkably improved by the combination of chemically and physically modified processes including polyvinylpolypyrrolidone (PVPP) addition, acetone cleaning, and SDS replacement. The protocol gave a higher protein yield and vastly greater resolution and spot intensity. The efficiency of this protocol and its feasibility in fiber proteomic study were demonstrated by comparison of the cotton fiber proteomes at two growth stages. Furthermore, ten protein spots changed significantly were identified by MS/tandem MS and their potential relationships to fiber development were discussed. To the best of our knowledge, this is the first time that a protocol for protein extraction from cotton fiber tissues appears to give satisfactory and reproductive 2-D protein profiles. The protocol is expected to accelerate the process of the proteomic study of cotton fibers and also to be applicable to other recalcitrant plant tissues.     

Effective protein extraction protocol for proteomics studies of Jerusalem artichoke leaves

Protein extraction is a crucial step for proteomics studies. To establish an effective protein extraction protocol suitable for two‐dimensional electrophoresis (2DE) analysis in Jerusalem artichoke (Helianthus tuberosus L.), three different protein extraction methods—trichloroacetic acid/acetone, Mg/NP‐40, and phenol/ammonium acetate—were evaluated using Jerusalem artichoke leaves as source materials. Of the three methods, trichloroacetic acid/acetone yielded the best protein separation pattern and highest number of protein spots in 2DE analysis. Proteins highly abundant in leaves, such as Rubisco, are typically problematic during leaf 2DE analysis, however, and this disadvantage was evident using trichloroacetic acid/acetone. To reduce the influence of abundant proteins on the detection of low‐abundance proteins, we optimized the trichloroacetic acid/acetone method by incorporating a PEG fractionation approach. After optimization, 363 additional (36.2%) protein spots were detected on the 2DE gel. Our results suggest that trichloroacetic acid/acetone method is a better protein extraction technique than Mg/NP‐40 and phenol/ammonium acetate in Jerusalem artichoke leaf 2DE analysis, and that trichloroacetic acid/acetone method combined with PEG fractionation procedure is the most effective approach for leaf 2DE analysis of Jerusalem artichoke.     

Horizontal comparative fluorescence two‐dimensional gel electrophoresis for improved spot coordinate detection

Vertical comparative 2D fluorescence gel electrophoresis (CoFGE) has recently been shown to increase the reproducibility of coordinate assignment for protein spots, in particular in singular experiments, which cannot be investigated using DIGE. The method applies a standardized marker grid formed by a set of purified proteins to the sample proteome in a conglomerate of 1DE, 2DE, and DIGE. Here, improvements are demonstrated by transferring CoFGE to horizontal 2DE. These include the elimination of the protein modification by residual acrylamide monomer unavoidable in vertical CoFGE, reduced buffer volumes, and highly efficient laboratory procedures. Spot patterns are well defined and can be easily analyzed using commercially available warping algorithms. With horizontal CoFGE also a correction for changes in pI was introduced using a third fluorescent dye. Horizontal CoFGE holds high promises in comparative proteomics.     

Proteomic analysis of cellular soluble proteins from human bronchial smooth muscle cells by combining nondenaturing micro 2DE and quantitative LC‐MS/MS. 2. Similarity search between protein maps for the analysis of protein complexes

Human bronchial smooth muscle cell soluble proteins were analyzed by a combined method of nondenaturing micro 2DE, grid gel‐cutting, and quantitative LC‐MS/MS and a native protein map was prepared for each of the identified 4323 proteins [1]. A method to evaluate the degree of similarity between the protein maps was developed since we expected the proteins comprising a protein complex would be separated together under nondenaturing conditions. The following procedure was employed using Excel macros; (i) maps that have three or more squares with protein quantity data were selected (2328 maps), (ii) within each map, the quantity values of the squares were normalized setting the highest value to be 1.0, (iii) in comparing a map with another map, the smaller normalized quantity in two corresponding squares was taken and summed throughout the map to give an “overlap score,” (iv) each map was compared against all the 2328 maps and the largest overlap score, obtained when a map was compared with itself, was set to be 1.0 thus providing 2328 “overlap factors,” (v) step (iv) was repeated for all maps providing 2328 × 2328 matrix of overlap factors. From the matrix, protein pairs that showed overlap factors above 0.65 from both protein sides were selected (431 protein pairs). Each protein pair was searched in a database (UniProtKB) on complex formation and 301 protein pairs, which comprise 35 protein complexes, were found to be documented. These results demonstrated that native protein maps and their similarity search would enable simultaneous analysis of multiple protein complexes in cells.     

Halloysite‐based dopamine‐imprinted polymer for selective protein capture

We describe a facile, general, and highly efficient approach to obtain polydopamine‐coated molecularly imprinted polymer based on halloysite nanotubes for bovine serum albumin. The method combined surface molecular imprinting and one‐step immobilized template technique. Hierarchically structured polymer was prepared in physiological conditions adopting dopamine as functional monomer. A thin layer of polydopamine can be coated on the surface of amino‐modified halloysite nanotubes by self‐polymerization, and the thickness of the imprinted shells can be controlled by the mass ratio of matrix and dopamine. The polymer was characterized by Fourier transform infrared spectrometry, transmission electron microscopy, and thermogravimetric analysis. The prepared material showed high binding capacity (45.4 mg/g) and specific recognition behavior toward the template protein. In addition, stability and regeneration analyses indicated that the imprinted polymer exhibited excellent reusability (relative standard deviation < 9% for batch‐to‐batch evaluation). Therefore, the developed polymer is effective for protein recognition and separation.     

High MS-compatibility of silver nitrate-stained protein spots from 2-DE gels using ZipPlates and AnchorChips for successful protein identification

The availability of easy-to-handle, sensitive, and cost-effective protein staining protocols for 2-DE, in conjunction with a high compatibility for subsequent MS analysis, is still a prerequisite for successful proteome research. In this article we describe a quick and easy-to-use methodological protocol based on sensitive, homogeneous, and MS-compatible silver nitrate protein staining, in combination with an in-gel digestion, employing the Millipore 96-well ZipPlate system for peptide preparation. The improved quality and MS compatibility of the generated protein digests, as compared to the otherwise weakly MS-compatible silver nitrate staining, were evaluated on real tissue samples by analyzing 192 Coomassie-stained protein spots against their counterparts from a silver-stained 2-DE gel. Furthermore, the applicability of the experimental setup was evaluated and demonstrated by the analysis of a large-scale MALDI-TOF MS experiment, in which we analyzed an additional ~1000 protein spots from 2-DE gels from mouse liver and mouse brain tissue.     

An optimized method to extract poplar leaf proteins for two‐dimensional gel electrophoresis guided by analysis of polysaccharides and phenolic compounds

Commonly used methods for protein extraction from plant leaves, such as extraction with phenol or a combination of trichloroacetic acid and acetone, were ineffective for four tested cultivars of poplar. Moreover, multiple protocols for 2DE of the extracted proteins gave different results when protein profiles of relatively closely related plants were compared. Given that polycyclic compounds strongly hinder 2DE, we analyzed the impact of polyphenols and polysaccharides present in the plant tissues used for protein extraction, on the quality of 2DE protein profiles. Analysis of content of polyphenols and polysaccharides in leaves of poplar cultivars showed that even small differences in concentrations of analyzed metabolites accompany large differences between poplar cultivars when considering the susceptibility of samples to protein extraction for 2DE. High‐quality 2DE results were correlated with decreased amounts of polyphenols. Additional analysis using MS/MS suggested that only levels of total phenolics affected the results of 2DE. Soluble total nonstructural carbohydrates also had a negative effect, but the level of starch was not important. Finally, we present an optimized method for extraction of proteins from poplar leaves, which enables reliable comparative analysis of four different poplar cultivars, that is, “Eridano,” “Villafranca,” “NE‐42,” and “Luisa Avanzo,” which have not yet been used for the proteomic studies.     

Sugarcane proteomics: Establishment of a protein extraction method for 2‐DE in stalk tissues and initiation of sugarcane proteome reference map

Sugarcane is an important commercial crop cultivated for its stalks and sugar is a prized commodity essential in human nutrition. Proteomics of sugarcane is in its infancy, especially when dealing with the stalk tissues, where there is no study to date. A systematic proteome analysis of stalk tissue yet remains to be investigated in sugarcane, wherein the stalk tissue is well known for its rigidity, fibrous nature, and the presence of oxidative enzymes, phenolic compounds and extreme levels of carbohydrates, thus making the protein extraction complicated. Here, we evaluated five different protein extraction methods in sugarcane stalk tissues. These methods are as follows: direct extraction using lysis buffer (LB), TCA/acetone precipitation followed by solubilization in LB, LB containing thiourea (LBT), and LBT containing tris, and phenol extraction. Both quantitative and qualitative protein analyses were performed for each method. 2‐DE analysis of extracted total proteins revealed distinct differences in protein patterns among the methods, which might be due to their physicochemical limitations. Based on the 2‐D gel protein profiles, TCA/acetone precipitation‐LBT and phenol extraction methods showed good results. The phenol method showed a shift in pI values of proteins on 2‐D gel, which was mostly overcome by the use of 2‐D cleanup kit after protein extraction. Among all the methods tested, 2‐D cleanup‐phenol method was found to be the most suitable for producing high number of good‐quality spots and reproducibility. In total, 30 and 12 protein spots commonly present in LB, LBT and phenol methods, and LBT method were selected and subjected to eLD‐IT‐TOF‐MS/MS and nESI‐LC‐MS/MS analyses, respectively, and a reference map has been established for sugarcane stalk tissue proteome. A total of 36 nonredundant proteins were identified. This is a very first basic study on sugarcane stalk proteome analysis and will promote the unexplored areas of sugarcane proteome research.     

Ivory species identification using electrophoresis‐based techniques

Despite continuous conservation efforts by national and international organizations, the populations of the three extant elephant species are still dramatically declining due to the illegal trade in ivory leading to the killing of elephants. A requirement to aid investigations and prosecutions is the accurate identification of the elephant species from which the ivory was removed. We report on the development of the first fully validated multiplex PCR‐electrophoresis assay for ivory DNA analysis that can be used as a screening or confirmatory test. SNPs from the NADH dehydrogenase 5 and cytochrome b gene loci were identified and used in the development of the assay. The three extant elephant species could be identified based on three peaks/bands. Elephas maximus exhibited two distinct PCR fragments at approximate 129 and 381 bp; Loxodonta cyclotis showed two PCR fragments at 89 and 129 bp; and Loxodonta africana showed a single fragment of 129 bp. The assay correctly identified the elephant species using all 113 ivory and blood samples used in this report. We also report on the high sensitivity and specificity of the assay. All single‐blinded samples were correctly classified, which demonstrated the assay's ability to be used for real casework. In addition, the assay could be used in conjunction with the technique of direct amplification. We propose that the test will benefit wildlife forensic laboratories and aid in the transition to the criminal justice system.     

Toward an integrated microchip sized 2-D polyacrylamide slab gel electrophoresis device for proteomic analysis

We describe a miniaturized instrument capable of performing 2-DE. Our miniaturized device is able to perform IEF and polyacrylamide slab gel electrophoresis (PASGE) in the same unit. It consists of a compartment for a first-dimensional IEF gel, which is connected to a second-dimensional PASGE gel. The focused samples are automatically transferred from the IEF gel to the PASGE gel by electromigration. Our preliminary experiments show that the device is able to focus and separate a mixture of proteins in approximately 1 h, excluding the time required for the staining procedure. On average, the gel-to-gel retardation factor (Rf) variation was 6.2% (+/-0.9%) and pI variation was 2.5% (+/-0.6%). Separated protein spots were excised from stained gels, digested with trypsin, and further identified by MS, thus enabling direct proteomic analysis of the separated proteins.     

Selective adsorption of protein by a high‐efficiency Cu2+‐cooperated magnetic imprinted nanomaterial

We report a core–shell magnetic molecularly imprinted polymer with high affinity through a facile sol–gel method for the selective adsorption of bovine hemoglobin from real bovine blood. Copper ions grafted on the surface of the matrix could immobilize template protein through chelation, which greatly enhances the orderliness of imprinted cavities and affinity of polymers. The obtained products exhibit a desired level of magnetic susceptibility, resulting in the highly efficient adsorption process. The results of adsorption experiments show that the saturation adsorption capacity of imprinted products could reach 116.3 mg/g within 30 min. Meanwhile, the specific binding experiment demonstrates the high selectivity of polymers for bovine hemoglobin. Furthermore, satisfactory reusability is demonstrated by ten adsorption–desorption cycles with no obvious deterioration in binding capacity. Electrophoretic analysis suggests the polymer could be used successfully in separation and enrichment of bovine hemoglobin from the bovine blood sample, which exhibits potential application in pretreatment of proteomics.