Multistep manipulations of poly(methyl‐methacrylate) submicron particles using dielectrophoresis

A microfluidic chip for multistep manipulations of PMMA submicron particles (PMMA‐SMPs) based on dielectrophoresis (DEP) has been developed that includes four main functions of focusing, guiding, trapping, and releasing the SMPs. The structure of the DEP chip consists of a top electrode made of indium tin oxide, a flow chamber formed by optically clear adhesive tape and bottom electrodes with different patterns for different purposes. The bottom electrodes can be divided into three parts: a fish‐bone‐type electrode array that provides the positive DEP force for focusing the suspended nanoparticles (NPs) near the inlet in the flow chamber; the second is for switching and guiding the focused NPs along the electrode surface to the target area, like a flow passing along a virtual channel; and a trapping electrode in the downstream for trapping and releasing the guided NPs. According to the simulation and experimental results, NPs can be aligned along the electrode of the focusing electrode and guided toward the target electrode by means of a positive DEP force between the top and bottom electrodes, with the effects of Brownian motion and Stokes force. In order to demonstrate the sequence of DEP manipulations, a PMMA‐NP suspension is introduced to the DEP chip; the size of the PMMA‐SMPs is about 300 nm. Furthermore, a LabVIEW program developed for sequence control of the AC signals for the multistep manipulations. Consequently, the DEP chip provides an excellent platform technology for the multistep manipulation of SMPs.     

Dielectrophoretic investigation of plant virus particles: Cow Pea Mosaic Virus and Tobacco Mosaic Virus

This paper reports experimental results on the dielectrophoretic (DEP) behaviour on two nonenveloped plant viruses of different geometrical shapes, namely Cow Pea Mosaic Virus (CPMV) and Tobacco Mosaic Virus (TMV). The DEP properties of carboxy-modified latex beads of the same size are also reported. The DEP properties of single particles were obtained from measurement of the frequency at which the DEP force on a particle goes to zero (the crossover frequency). The DEP behaviour of particle ensembles was also measured using image processing. The dielectric properties of the particles were evaluated from the DEP data. The surface conductance was found to be 0.3 nS for CPMV, 0.38 nS for TMV, and 0.52 nS for 27 nm diameter carboxy-latex beads. Data analysis has shown that the optimal condition for separation of TMV and CPMV is a low-conductivity suspending medium - below 1 mS/m.     

Dielectrophoretic manipulation of nanomaterials: A review

Nanomaterials manipulation using dielectrophoresis (DEP) is one of the major research areas that could potentially benefit the micro/nano science for diverse applications, such as microfluidics, nanomachine, and biosensor. The innovation and development of basic theories, methods or applications will have a huge impact on the entire related field. Specifically, for DEP manipulation of nanomaterials, improvements in comprehensive performance of accuracy, flexibility and scale could promote broader applications in micro/nano science. Therefore, to explore the directions for future research, this paper critically provides an overview on the fundamentals, recent progress, current challenges, and potential applications of DEP manipulation of nanomaterials. This review will also act as a guide and reference for researchers to explore promising applications in relevant research.     

Dielectrophoretic manipulation and separation of microparticles using curved microelectrodes

This paper presents the development and experimental analysis of a dielectrophoresis (DEP) system, which is used for the manipulation and separation of microparticles in liquid flow. The system is composed of arrays of microelectrodes integrated to a microchannel. Novel curved microelectrodes are symmetrically placed with respect to the centre of the microchannel with a minimum gap of 40 μm. Computational fluid dynamics method is utilised to characterise the DEP field and predict the dynamics of particles. The performance of the system is assessed with microspheres of 1, 5 and 12 μm diameters. When a high‐frequency potential is applied to microelectrodes a spatially varying electric field is induced in the microchannel, which creates the DEP force. Negative‐DEP behaviour is observed with particles being repelled from the microelectrodes. The particles of different dimensions experience different DEP forces and thus settle to separate equilibrium zones across the microchannel. Experiments demonstrate the capability of the system as a field flow fraction tool for sorting microparticles according to their dimensions and dielectric properties.     

Dielectrophoretic trapping of nanoparticles with an electrokinetic nanoprobe

A high aspect ratio 3D electrokinetic nanoprobe is used to trap polystyrene particles (200 nm), gold nanoshells (120 nm), and gold nanoparticles (mean diameter 35 nm) at low voltages (<1 V_rms). The nanoprobe is fabricated using room temperature self‐assembly methods, without the need for nanoresolution lithography. The nanoprobe (150–500 nm in diameter, 2–150 μm in length) is mounted on the end of a glass micropipette, enabling user‐specified positioning. The nanoprobe is one electrode within a point‐and‐plate configuration, with an indium–tin oxide cover slip serving as the planar electrode. The 3D structure of the nanoprobe enhances dielectrophoretic capture; further, electro‐hydrodynamic flow enhances trapping, increasing the effective trapping region. Numerical simulations show low heating (1 K), even in biological media of moderate conductivity (1 S/m).     

Dielectrophoretic separation of platelets from diluted whole blood in microfluidic channels

The dielectrophoresis (DEP) phenomenon is used to separate platelets directly from diluted whole blood in microfluidic channels. By exploiting the fact that platelets are the smallest cell type in blood, we utilize the DEP-activated cell sorter (DACS) device to perform size-based fractionation of blood samples and continuously enrich the platelets in a label-free manner. Cytometry analysis revealed that a single pass through the two-stage DACS device yields a high purity of platelets (approximately 95%) at a throughput of approximately 2.2 x 10(4) cells/second/microchannel with minimal platelet activation. This work demonstrates gentle and label-free dielectrophoretic separation of delicate cells from complex samples and such a separation approach may open a path toward continuous screening of blood products by integrated microfluidic devices.     

Dielectrophoretic characterization and separation of monocytes and macrophages using 3D carbon‐electrodes

Monocyte heterogeneity and its prevalence are revealed as indicator of several human diseases ranking from cardiovascular diseases to rheumatoid arthritis, chronic kidney diseases, autoimmune multiple sclerosis, and stroke injuries. When monocytes and macrophages are characterized and isolated with preserved genetic, phenotypic and functional properties, they can be used as label‐free biomarkers for precise diagnostics and treatment of various diseases. Here, the dielectrophoretic responses of the monocytes and macrophages were examined. We present 3D carbon‐electrode dielectrophoresis (carbon‐DEP) as a separation tool for U937 monocytes and U937 monocyte‐differentiated macrophages. The carbon‐electrodes advanced the usability and throughput of DEP separation, presented wider electrochemical stability. Using the 3D carbon‐DEP chip, we first identified the selective positive and negative DEP responses and specific crossover frequencies of monocytes and macrophages as their signatures for separation. The crossover frequency of monocytes and macrophages was 17 and 30 kHz, respectively. Next, we separated monocyte and macrophage subpopulations using their specific dielectrophoretic responses. Afterward, we used a fluorescence‐activated cell sorter to confirm our results. Finally, we enriched 70% of monocyte cells from the mixed cell population, in other words, concentration of monocyte cells to macrophage cells was five times increased, using the 30‐kHz, 10‐Vpp electric field and 1 μL/min flow rate.     

聚合物粒子在生物化学与生物医学中的应用

就亚微米和单粒径两种新型的聚合物粒子在生物化学与生物医学如免疫分析、药物载体、真核细胞、原核细胞及生物大分子产品等的分离等领域中的最新应用进行了综述。     

Monodispersed submicron porous silica particles functionalized with CD derivatives for chiral CEC

Rapid and efficient enantioseparation of halogen aryl alcohols and β‐blockers propranolol and pindolol in packed bed CEC (p‐CEC) using as‐prepared submicron porous silica chiral stationary phases (CSPs) has been achieved. Monodispersed 0.66 and 0.81 μm chiral submicron porous silica spheres were prepared using tetramethoxysilane and hexadecyltrimethylammonium bromide, followed by a hydrothermal treatment method with ammonia–ethanol to expand the pore of silica spheres without changing their spherical morphology. A proper specific surface of ca. 230 m²/g and pore sizes average of 6–8 nm were obtained by this method. The submicron porous silica spheres were modified with mono‐6‐phenylcarbamoylated β‐CD via thiol‐en radical addition. They were packed into 9 cm 50 μm id capillary columns with photopolymerized monolithic frits. These submicron CSPs showed greater column efficiency (about 476 000 plates/m for 4‐iodophenyl‐1‐ethanol) and higher resolution than the corresponding 3 μm CSP.     

Assessment of submicron particle zeta potential in simple electrokinetic microdevices

The present communication illustrates the use of simple electrokinetic devices for the assessment of the zeta potential of submicron polystyrene particles. A combination of manual and automatic particle tracking was employed. This approach allows for characterizing particles in the same conditions and devices in which they can be separated, e.g. dielectrophoretic separations; making the resulting data readily applicable.     

Preparation of micron-sized aromatic polyamide particles using ultrasonic irradiation

Aromatic polyamide particles were prepared by reacting p-phthalyl chloride and 4,4′-diaminodiphenyl ether in an acetone solution with a high water content, using a precipitation polymerization method with ultrasonic irradiation. The average particle diameter was ca. 712 nm, and the particles were porous and spherical with a narrow size distribution. They showed a high degree of crystallinity and excellent thermal stability. The morphology and the thermal decomposition temperature of the submicron particles were found to depend strongly on the volume of water added to the reaction system. In this polymerization method, the addition of water was essential for the formation of spherical particles. The simultaneous mixing process resulted in the formation of particles with a narrow size distribution, and the use of ultrasonic irradiation was effective in reducing particle size.     

Dielectrophoretic characterization and isolation of jellyfish stinging capsules

Jellyfish stinging capsules known as nematocysts are explosive, natural‐injection systems with high potential as a natural drug‐delivery system. These organelles consist of a capsule containing a highly folded thin needle‐like tubule and a matrix highly concentrated with charged constituents that enable the tubule to fire and penetrate a target. For the purpose of using these nematocysts as drug delivery system it is first required to purify subpopulations from heterogeneous population of capsules and to investigate each subpopulation's distinct function and characteristics. Here, the nematocysts’ dielectric properties were experimentally investigated using dielectrophoretic and electrorotational spectra with best fits derived from theoretical models. The dielectric characterization adds to our understanding of the nematocysts’ structure and function and is necessary for the dielectrophoretic isolation and manipulation of populations. As expected, the effect of monovalent and divalent exchange cations resulted in higher inner conductivity for the NaCl treated capsules; this result stands in agreement with their relative higher osmotic pressure. In addition, an efficient dielectrophoretic isolation of different nematocyst subpopulations was demonstrated, paving the way to an understanding of nematocysts’ functional diversity and the development of an efficient drug delivery platform.     

Elaboration of hydrophilic aminodextran containing submicron magnetic latex particles

Aminodextran containing submicron magnetic latex particles were prepared in two steps: (a) transformation of oil-in-water magnetic emulsion into structured magnetic latex particles via combination of seed and miniemulsion-like polymerization process and (b) immobilization (adsorption and chemical grafting) of prepared aminodextran onto negatively charged seed magnetic latex particles. The elaborated magnetic latex particles were characterized in terms of particle size, size distribution, morphology, surface charge density, chemical composition, magnetic properties, and also colloidal stability. The results showed that the morphology of the prepared seed magnetic latex is core–shell like and the cationic latex particles are hydrophilic and of high colloidal stability, irrespective of the aminodextran immobilization process.     

Dielectrophoretic separation of microalgae cells in ballast water in a microfluidic chip

The composition of the ship's ballast water is complex and contains a large number of microalgae cells, bacteria, microplastics, and other microparticles. To increase the accuracy and efficiency of detection of the microalgae cells in ballast water, a new microfluidic chip for continuous separation of microalgae cells based on alternating current dielectrophoresis was proposed. In this microfluidic chip, one piece of 3‐dimensional electrode is embedded on one side and eight discrete electrodes are arranged on the other side of the microchannel. An insulated triangular structure between electrodes is designed for increasing the inhomogeneity of the electric field distribution and enhancing the dielectrophoresis (DEP) force. A sheath flow is designed to focus the microparticles near the electrode, so as to increase the suffered DEP force and improve separation efficiency. To demonstrate the performance of the microfluidic separation chip, we developed two species of microalgae cells (Platymonas and Closterium) and a kind of microplastics to be used as test samples. Analyses of the related parameters and separation experiments by our designed microfluidic chip were then conducted. The results show that the presented method can separate the microalgae cells from the mixture efficiently, and this is the first time to separate two or more species of microalgae cells in a microfluidic chip by using negative and positive DEP force simultaneously, and moreover it has some advantages including simple operation, high efficiency, low cost, and small size and has great potential in on‐site pretreatment of ballast water.     

A new approach to the studies of submicron particle suspensions based on the effect of pressure in capillary zone electrophoresis

A new approach based on the effect of pressure in CZE is suggested for acceleration of particle migration in electrophoretic runs resulting in reduction of the analysis time. It provides conditions for studying fast processes in suspensions. The effect of pressure on the migration of silica spheres with average diameters of 100, 150, and 390 nm was studied by CZE at an applied voltage of 25 kV. The particle hydrodynamic behavior was also investigated under the same capillary dimensions and BGE composition. The total particle mobility (excluding the average flow rate) was found to increase with increasing the pressure applied and particle size. The particle migration mechanism explaining the effect of pressure on particle velocity was shown to be almost the same as in wide‐bore hydrodynamic chromatography. It is based on changing radial distribution of particle concentration along the capillary cross section depending on particle diffusivity. On the basis of this mechanism appearance of a zone of negatively charged particles in electropherograms ahead of the marker peak can be explained.     

Inorganic monoliths in separation science: A review

The practical application of rigid, macro-porous organic polymer and silica based monolithic stationary phases as separation media has been described in the literature since 1992 and 1996, respectively. Today these materials are extensively used in chromatography and electrochromatography and several detailed reviews appear annually describing these materials, their synthesis and application. To compliment these publications, this review focuses upon the less commonly utilised materials for monolith synthesis, both those that have already been applied within separation science, and those that have found applications elsewhere, such as catalysis and water filtration, but have the clear potential to be explored as novel stationary phases in the near future. For the purpose of the review monoliths formed from these various alternative materials will be termed ‘Exotic Monoliths’, as these new substrates in many cases have only just begun to be explored for chromatographic separations, and in many instances have unusual and highly selective surface chemistries, which are attractive in terms of broadening the choice of monolithic materials for separation science. An extensive range of monolithic materials based on the following elements and their compounds (mostly oxides) are covered: Zr, Ti, Al, Hf, C, Au, Ag, Ce, Ge and hydroxyapatite, together with their relevant properties, methods of synthesis, and current and potential applications in separation science.     

Preparation and characterization of submicron hybrid magnetic latex particles

Micrometer magnetic hybrid particles are of great interest in biomedical field, and various morphologies have been prepared via encapsulation processes. Regarding submicron, only few processes have been investigated and the most recent one leading to highly magnetic submicron magnetic hybrid particles is based on oil in water magnetic emulsion (MES) transformation. The encapsulation of magnetic iron oxide nanoparticles forming oil in water MES was investigated using different styrene/cross‐linker divinylbenzene volume ratio in the presence of potassium persulfate initiator. The encapsulation performed in this work is basically conducted by using well‐defined oil in water MES as a seed in radical emulsion polymerization. The chemical composition, morphology, iron oxide content, magnetic properties, electrokinetic properties, particle size, and size distribution of the prepared magnetic hybrid particles were examined using various techniques. The desired perfect magnetic core and polymer shell morphology were successfully obtained, and the final magnetic hybrid particles are superparamagnetic in nature and exhibit high iron oxide content (64 wt %). Copyright © 2015 John Wiley & Sons, Ltd.     

Dielectrophoretic immobilization of proteins: Quantification by atomic force microscopy

The combination of alternating electric fields with nanometer‐sized electrodes allows the permanent immobilization of proteins by dielectrophoretic force. Here, atomic force microscopy is introduced as a quantification method, and results are compared with fluorescence microscopy. Experimental parameters, for example the applied voltage and duration of field application, are varied systematically, and the influence on the amount of immobilized proteins is investigated. A linear correlation to the duration of field application was found by atomic force microscopy, and both microscopical methods yield a square dependence of the amount of immobilized proteins on the applied voltage. While fluorescence microscopy allows real‐time imaging, atomic force microscopy reveals immobilized proteins obscured in fluorescence images due to low S/N. Furthermore, the higher spatial resolution of the atomic force microscope enables the visualization of the protein distribution on single nanoelectrodes. The electric field distribution is calculated and compared to experimental results with very good agreement to atomic force microscopy measurements.     

Mechanism of the growth of monodispersed spherical silica particles to the submicron size

Summary Monodispersed spherical submicron silica particles were obtained by the precipitation of soluble silica on the surface of preliminary obtained smaller particles. Silica was added into the system at low concentrations to prevent both its polymerization in the solution and the formation of new particles. The kinetics of the particle growth is controlled by the diffusion of soluble silica through the double diffusion layer.     

Continuous dielectrophoretic separation of particles in a spiral microchannel

Particle separation is a fundamental operation in the areas of biology and physical chemistry. A variety of force fields have been used to separate particles in microfluidic devices, among which electric field may be the most popular one due to its general applicability and adaptability. So far, however, electrophoresis‐based separations have been limited primarily to batchwise processes. Dielectrophoresis (DEP)‐based separations require in‐channel micro‐electrodes or micro‐insulators to produce electric field gradients. This article introduces a novel particle separation technique in DC electrokinetic flow through a planar double‐spiral microchannel. The continuous separation arises from the cross‐stream dielectrophoretic motion of particles induced by the non‐uniform electric field inherent to curved channels. Specifically, particles are focused by DEP to one sidewall of the first spiral, and then dielectrophoretically deflected toward the other sidewall of the second spiral at a particle‐dependent rate, leading to focused particle streams along different flow paths. This DEP‐based particle separation technique is demonstrated in an asymmetric double‐spiral microchannel by continuously separating a mixture of 5/10 μm particles and 3/5 μm particles.