Electrochemical Behavior of Mn( Ⅱ ) in the Melt LiCkl-KCl-MgCl2-MnCl2

采用循环伏安和计时电位等电化学技术研究了Mn(Ⅱ)在LiCl-KCl-MgCl2-MnCl2熔盐体系中的电还原过程和Mg-Li-Mn合金的共沉积条件.结果显示,在LiCl-KCl-MgCl2-MnCl2熔盐体系中,Mn(Ⅱ),Mg(Ⅱ)和Li(Ⅰ)的还原电位分别为-1.14,-1.78和-2.19 V.Mn先析出,在钼电极表面沉积；Mg在Mn上欠电位沉积生成Mg-Mn合金；而Li在Mg-Mn合金上欠电位沉积形成Mg-Li-Mn合金.实验结果表明,Mn(Ⅱ)在熔盐中的还原电极过程受扩散控制.Mn(Ⅱ)在熔盐中的扩散系数约为10-5 cm2/s.运用XRD技术对恒电流电解制备的Mg-Li-Mn合金进行了分析,结果表明,Mg-Li-Mn合金中含有β-Li,α-Mg和Mn 3个相.     

Mn（Ⅱ）在LiCl-KCl-MgCl2-MnCl2熔盐体系中的电化学行为

采用循环伏安和计时电位等电化学技术研究了Mn(Ⅱ)在LiCl-KCl-MgCl2-MnCl2熔盐体系中的电还原过程和Mg-Li-Mn合金的共沉积条件.结果显示,在LiCl-KCl-MgCl2-MnCl2熔盐体系中,Mn(Ⅱ),Mg(Ⅱ)和Li(Ⅰ)的还原电位分别为-1.14,-1.78和-2.19 V.Mn先析出,在钼电极表面沉积;Mg在Mn上欠电位沉积生成Mg-Mn合金;而Li在Mg-Mn合金上欠电位沉积形成Mg-Li-Mn合金.实验结果表明,Mn(Ⅱ)在熔盐中的还原电极过程受扩散控制.Mn(Ⅱ)在熔盐中的扩散系数约为10-5 cm2/s.运用XRD技术对恒电流电解制备的Mg-Li-Mn合金进行了分析,结果表明,Mg-Li-Mn合金中含有β-Li,α-Mg和Mn 3个相.     

Dy（III）离子在LiCl-KCl熔盐中的电化学行为及Dy-Ni金属间化合物的选择性制备

采用循环伏安、方波伏安和开路计时电位等电化学方法研究了Dy(III)离子在LiCl-KCl共晶盐中的电化学行为及Dy-Ni合金形成的电化学机理.循环伏安和方波伏安法研究表明, Dy(III)离子的电化学还原过程为三个电子转移的一步反应.与惰性W电极相比, Dy(III)离子在Ni电极上的循环伏安曲线多出了三对氧化还原峰,是由于Dy与Ni形成了合金化合物,导致Dy(III)离子在活性Ni电极发生了欠电位沉积.采用X射线衍射(XRD)和扫描电子显微镜(SEM)附带能量散射谱(EDS)对恒电位(-1.6,-1.8和-2.0 V)电解制备的Dy-Ni合金进行分析,分别获得了DyNi5, Dy2Ni7和DyNi2金属间化合物.实验结果表明,通过控制电位进行恒电位电解可以有选择性地制备不同的金属间化合物.     

LiCl-KCl熔盐体系中镨(Ⅲ)在镍电极上的电化学行为

采用循环伏安、方波伏安、计时电位和开路计时电位等电化学方法研究了Pr(Ⅲ)离子在共晶LiClKCl熔盐中Ni电极上的电化学行为及Pr-Ni合金化机理.结果表明,Pr(Ⅲ)离子的电化学还原过程为三电子转移的一步反应.与惰性Mo电极上的循环伏安曲线相比,Pr(Ⅲ)离子在活性Ni电极的循环伏安曲线上还出现了4对氧化还原峰,表明Pr(Ⅲ)离子在Ni电极上发生欠电位沉积,是由于生成不同的Pr-Ni金属间化合物.采用X射线衍射仪和扫描电子显微镜-能谱仪等对恒电位电解的产物进行了表征.结果表明,在不同电位下进行恒电位电解时,每个电位上只得到一种Pr-Ni金属间化合物,分别为Pr Ni2,Pr Ni3,Pr2Ni7和Pr Ni5.     

Pr(Ⅲ)离子在LiCl-KCl熔体中Bi膜W电极上的电化学行为

采用循环伏安、方波伏安、计时电位和开路计时电位等电化学方法研究了Pr（Ⅲ）离子在LiCl-KCl-BiCl₃熔体中W电极上的电化学行为。循环伏安和方波伏安的研究表明,Pr在预先沉积的Bi膜电极上发生欠电位沉积是由于生成了Pr-Bi金属间化合物,导致Pr（Ⅲ）在Bi膜电极上的还原电位比在W电极上还原电位更正。从开路计时电位曲线可以观察到两相共存的Pr-Bi金属间化合物的两个平台。利用开路计时电位计算了723-873 K温度范围内Pr在Pr-Bi合金中的活度和偏摩尔Gibbs自由能以及Pr-Bi金属间化合物的生成Gibbs自由能。通过恒电位电解,在液态Bi电极上得到了Pr-Bi合金,并采用X射线衍射（XRD）和扫描电子显微镜（SEM）附带能量散射谱（EDS）对样品进行了表征,结果表明所得到的Pr-Bi金属间化合物为PrBi₂和PrBi。     

Pr(III)离子在LiCl-KCl熔体中Bi膜W电极上的电化学行为（英文）

采用循环伏安、方波伏安、计时电位和开路计时电位等电化学方法研究了Pr(III)离子在Li Cl-KCl-Bi Cl_3熔体中W电极上的电化学行为。循环伏安和方波伏安的研究表明,Pr在预先沉积的Bi膜电极上发生欠电位沉积是由于生成了Pr-Bi金属间化合物,导致Pr(III)在Bi膜电极上的还原电位比在W电极上还原电位更正。从开路计时电位曲线可以观察到两相共存的Pr-Bi金属间化合物的两个平台。利用开路计时电位计算了723-873 K温度范围内Pr在Pr-Bi合金中的活度和偏摩尔Gibbs自由能以及Pr-Bi金属间化合物的生成Gibbs自由能。通过恒电位电解,在液态Bi电极上得到了Pr-Bi合金,并采用X射线衍射(XRD)和扫描电子显微镜(SEM)附带能量散射谱(EDS)对样品进行了表征,结果表明所得到的Pr-Bi金属间化合物为Pr Bi_2和Pr Bi。     

LiCl-KCl熔盐体系中镨(Ⅲ)在镍电极上的电化学行为

采用循环伏安、 方波伏安、 计时电位和开路计时电位等电化学方法研究了Pr(Ⅲ)离子在共晶LiCl-KCl熔盐中Ni电极上的电化学行为及Pr-Ni合金化机理. 结果表明, Pr(Ⅲ)离子的电化学还原过程为三电子转移的一步反应. 与惰性Mo电极上的循环伏安曲线相比, Pr(Ⅲ) 离子在活性Ni电极的循环伏安曲线上还出现了4对氧化还原峰, 表明Pr(Ⅲ)离子在Ni电极上发生欠电位沉积, 是由于生成不同的Pr-Ni金属间化合物. 采用X射线衍射仪和扫描电子显微镜-能谱仪等对恒电位电解的产物进行了表征. 结果表明, 在不同电位下进行恒电位电解时, 每个电位上只得到一种Pr-Ni金属间化合物, 分别为PrNi₂, PrNi₃, Pr₂Ni₇和PrNi₅.     

锌在金电极上的欠电位沉积

采用循环伏安法和计时电流法,研究了强碱溶液中锌在金电极上的欠电位沉积。 通过改变锌离子浓度和扫描速率等实验参数,在约-0.935 V（vs.SCE）开始出现锌的欠电位沉积,并且金属离子浓度的变化可能会影响到欠电位沉积过程的动力学机制;计时电流实验证实,锌欠电位沉积于金衬底上遵循的是受掺入吸附原子控制的二维瞬时成核和生长机制;且OH-离子的吸附对锌欠电位沉积具有重要的影响。     

亚硒酸钠在L-半胱氨酸自组装类生物膜修饰电极上的电化学行为

利用L-半胱氨酸自组装膜修饰金电极(L-Cys,Au/SAMs), 在0.05mol/L H_2SO_4 底液中研究了 Na_2SeO_3 的电化学特性.在0.00～1.30 V (vs. SCE) 电位范围内对微量Na_2SeO_3进行循环伏安扫描,发现L-Cys, Au/SAMs修饰电极在峰电位0.89 V处有灵敏的Se的氧化溶出峰.通过比较裸金电极和修饰电极在Na_2SeO_3 溶液中的电化学特性发现,修饰电极通过巯基中的S与Na_2SeO_3发生氧化还原作用生成Se,且修饰电极对沉积在电极表面的Se的氧化过程具有催化作用.根据Na_2SeO_3在单分子膜上的电化学行为,提出了单分子膜中硫(Au-S)与Se(Ⅳ)作用生成Se的反应机理、Se电化学催化氧化机理及巯基化合物通过生成纳米硒生物吸收Se的类生物膜模型.     

Au/PAni/GC电极的制备及对甲醛的电催化氧化研究

应用循环伏安、恒电位阶跃等方法研究了在苯胺修饰的玻碳电极（PAni/GC） 表面金颗粒的电化学沉积及不同的制备方法对甲醛氧化电催化活性的影响。研究表 明,在PAni/GC电极表面,金的电沉积在初始阶段遵循扩散控制瞬时成核三维成长 模式。在碱性介质中,电解沉积法制备的电极比循环伏安法制备的电极对甲醛的催 化氧化有更高的催化电流。但是,在循环伏安法制备的电极上甲醛的氧化可以在很 负的电极电位下发生。     

Underpotential Deposition and Stripping of Lead at Disorganized Monolayer‐Modified Gold Electrodes

Underpotential deposition (UPD) and stripping of Pb²⁺ at thiol‐based disorganized monolayer‐modified gold electrodes was studied by cyclic voltammetry (CV) and electrochemical quartz crystal microgravimetry (EQCM). Electrodes modified with mercaptoacetic acid or mercaptoethane sulfonic acid were studied. Due to the proximity of the potentials for the Pb UPD and thiol reductive desorption, achievement of a UPD‐stripping voltammetry methodology for determination of low concentrations of Pb²⁺ was not successful. However by comparison of the CV and EQCM data and consideration of the possible mass changes per mole electrons transferred in light of the other species present in solution, possible mechanisms are put forward for the deposition and stripping of Pb²⁺ at thiol‐modified electrodes.     

离子液体中Au(111)和Pt(111)表面Ge欠电位沉积的现场STM研究

本文研究BMIPF₆离子液体中Au(111)和Pt(111)表面Ge的电沉积行为. 循环伏安法测试结果表明,在含0.1 mol·L^-1 GeCl₄的BMIPF₆溶液Au(111)和Pt(111)表面均有两个与Ge沉积过程相关的还原峰. 第一个还原峰包含了Ge⁴⁺还原成Ge²⁺及Ge的欠电位沉积,第二个还原峰对应Ge的本体沉积. 现场扫描隧道显微镜研究结果表明,Ge在Au(111)和Pt(111)表面均有两层欠电位沉积. 第一层欠电位沉积厚度约为0.25 nm、形貌平整、带有缝隙的亚单层结构. 第二层欠电位沉积形貌相对粗糙的点状团簇结构. 该欠电位沉积过程伴随表面合金化.     

Comparative investigation of underpotential deposition of Ag from aqueous and ionic electrolytes: An electrochemical and in situ STM study

Underpotential deposition (UPD) of Ag on Au(111) has been studied with two different electrolytes: aqueous 0.1 M H2SO4 solution in comparison with the ionic liquid 1-butyl-3-methylimidazolium chloride BMICl + AlCl3. Of particular interest is the distinct behavior of 2D phase formation at both interfaces, which has been investigated by cyclic and linear sweep voltammetry in combination with in situ electrochemical scanning tunneling microscopy (STM). It is found that one monolayer (ML) of Ag is formed in the UPD region in both electrolytes. In aqueous solution, atomically resolved STM images at 500 mV versus Ag/Ag+ show a (3 x 3) adlayer of Ag, whereas after sweeping the potential just before the commencement of the bulk Ag deposition, a transition from expanded (3 x 3) to pseudomorphic ML of Ag on Au(111) occurs. In BMICl-AlCl3, the first UPD process of Ag exhibits two peaks at 410 and 230 mV indicating that two distinct processes on the surface take place. For the first time, STM images with atomic resolution reveal a transition from an inhomogeneous to an ordered phase with a (square root of 3 x square root of 3)R30 degrees structure and an adsorption of AlCl4- anions having a superlattice of (1.65 x square root of 3)R30 degrees preceding the deposition of Ag.     

Copper UPD on Selenium-Modified Polycrystalline Pt Electrode

Underpotential deposition of Cu onto an Se-modified smooth polycrystalline Pt electrode in an acidic CuSO₄ solution was investigated using a cyclic voltammetry. It was obtained that the specific voltammetric pattern of Cu UPD observed for a clean Pt electrode disappeared and a new current peak at potentials much closer to bulk Cu deposition was formed. This feature of a cyclic voltammogram is similar to that observed earlier for clean Pt electrode in acidic CuSO₄ solutions containing selenite and also to that described for S-modified Pt electrode in an additive-free CuSO₄ solution. The reasons for the difference in the voltammetric behavior of bare Pt and Se-modified Pt in the potential range characteristic of Cu UPD were considered. A model of Cu deposition taking place onto the free Pt sites at more positive potentials and onto the Se-covered ones at less positive potentials was discussed with closer scrutiny.     

Dealloyed Silver Nanoparticles as Efficient Catalyst Towards Oxygen Reduction in Alkaline Solution

Silver nanoparticles(Ag NPs) were prepared by dealloying Mg-Ag alloy precursor. The obtained Ag NPs have an average ligament size of (50±10) nm. Electrocatalytic activity of Ag NPs towards oxygen reduction reaction(ORR) in 0.1 mol/L NaOH solution was assessed via cyclic voltammetry(CV), rotating ring disk elec-trode(RRDE) techniques, and electrochemical impedance spectroscopy(EIS). The electrochemical active area for the ORR was evaluated by means of the charge of the underpotential deposition(UPD) of lead(Pb) on Ag NPs. The CV results indicate that Ag NPs have a higher current density and more positive onset potential than the bulk Ag electrode. RRDE was employed to determine kinetic parameters for O₂ reduction. Ag NPs exhibit a higher kinetic current density of 25.84 mA/cm² and a rate constant of 5.45×10^-2 cm/s at -0.35 V vs. Hg/HgO. The number of electrons(n) involved in ORR is close to 4. Further, EIS data show significantly low charge transfer resistances on the Ag NPs electrode. The results indicate that the prepared Ag NPs have a high activity and are promising catalyst for ORR in alkaline solution.     

反胶束法制备直接甲醇燃料电池Pt-Sn/C催化剂及其表征

在水/AOT/环己烷反胶束体系中, 制备了Pt-Sn/C催化剂, 研究了不同ω (反胶束溶液中水与表面活性剂的物质量之比)值对Pt-Sn粒径的影响. 并采用TEM, XRD, XPS, 循环伏安等技术对其进行表征. TEM结果表明合成的Pt-Sn纳米颗粒为球形, 在碳载体表面均匀分布, 粒径分布窄, 平均粒径为2.7 nm. Pt-Sn颗粒尺寸随着ω的增加而增大. XRD结果表明该催化剂中Pt具有面心立方结构且没有与Sn形成合金. XPS结果表明在该催化剂中, Pt主要以零价态存在. 在甲醇溶液中的循环伏安扫描结果表明, 甲醇氧化峰电位和峰电流随着ω的增加而减小, 说明反胶束方法可以通过控制颗粒尺寸, 从而影响催化剂的电氧化活性. 相对于商用Pt-Ru/Vulcan XC-72 (20 wt%, E-TEK公司), 该催化剂具有较低的峰电势以及较高的I_f/I_b (循环伏安曲线中正向扫描峰电流与反向扫描峰电流的比值), 这表明用此方法制备的Pt-Sn/C催化剂具有较好的抗中毒能力.     

Stripping voltammetry of copper and lead using gold electrodes modified with self-assembled monolayers

One problem associated with using bare solid metal electrodes, such as gold and platinum, in stripping analysis to determine heavy metal ions such as lead and copper ions in dilute solutions is that underpotential deposition (UPD) gives multiple stripping peaks in the analysis of mixtures. These peaks are often overlapped and cannot be conveniently used for analytical purposes. Bifunctional alkylthiols, such as 3-mercaptopropionic acid, with an ionizable group on the other terminal end of the thiol can form self-assembled monolayers (SAMs) on the surface of the gold electrode. It is shown that such an SAM-modified gold electrode minimizes the UPD effects for the stripping analysis of lead and copper. The anodic peak potential shifts and the peak shape changes, indicating that the SAM changes the deposition and stripping steps of these heavy metal ions. Thus, the sensitivity levels for both single species and mixtures can be significantly improved for the conventional solid electrodes. The mechanism of the deposition reaction at the SAM-modified gold electrodes is discussed. Received: 29 May 1997 / Accepted: 24 June 1997     

Electronic Structure and Magnetic Properties of a High-Spin MnIII Complex: [Mn(mesacac)3] (mesacac=1,3-Bis(2,4,6-trimethylphenyl)-propane-1,3-dionato)

Metal acetylacetonates of the general formula [M(acac)₃] (M^III=Cr, Mn, Fe, Co) are among the best investigated coordination compounds. Many of these first-row transition metal complexes are known to have unique electronic properties. Independently, photophysical research with different β-diketonate ligands pointed towards the possibility of a special effect of the 2,4,6-trimethylphenyl substituted acetylacetonate (mesacac) on the electron distribution between ligand and metal (MLCT). We therefore synthesized and fully characterized the previously unknown octahedral title complex. Its solid-state structure shows a Jahn-Teller elongation with two Mn−O bonds of 2.12/2.15 Å and four Mn−O bonds of 1.93 Å. Thermogravimetric data show a thermal stability up to 270 °C. High-resolution mass spectroscopy helped to identify the decomposition pathways. The electronic state and spin configuration of manganese were characterized with a focus on its magnetic properties by measurement of the magnetic susceptibility and triple-zeta density functional theory (DFT) calculations. The high-spin state of manganese was confirmed by the determination of an effective magnetic moment of 4.85 μ_B for the manganese center.     

反式双氧锰(V)咔咯配合物的稳定性

采用密度泛函理论(DFT)的B3LYP方法对反式双氧锰(V)咔咯配合物阴离子的稳定性及其质子化物种进行了理论计算. 结果表明: 反式双氧锰(V)咔咯配合物阴离子构型稳定, 其反式双氧锰键O=Mn=O由锰原子的d轨道与两个氧原子的p轨道分别构成一个σ轨道和两个π轨道; 随着外围取代基吸电性增强, O=Mn=O键长缩短, 拉曼伸缩振动频率增大; 其质子化过程中得到两个质子的轴向氧原子与锰原子的距离超出正常化学键的范围, 从而形成水分子并脱离原来分子, 导致质子化行为是不可逆过程, 而形成单氧的咔咯锰(V)-氧配合物.