铂基催化剂用于柴油烃氧化

The catalytic performance of Pt-based catalysts for the total oxidation of hydrocarbons was investigated.The activity of supported Pt catalysts(Pt/Al2O3,Pt/ZrO2,Pt/TiO2,and Pt/H-ZSM-5)depends on the metal oxide support.Pt/Al2O3 showed the highest catalytic activity when the catalysts were aged at 750°C for 50 h in air.The activity of Pt/Al2O3 was dependent on the valence state of the Pt surface.Pt/Al2O3 with the Pt surface in the metallic state was more active than with the surface in the cationic state.The surface density of acid and basic sites on the Al2O3 support controlled the valence state of the Pt surface and stability of the Pt particles in the highly dispersed state,respectively.     

Meso-macroporous Al2O3 supported Ru catalysts for CO preferential oxidation in hydrogen-rich gases

Series of meso-macroporous Al2O3 supported Ru catalysts with different loadings were prepared by incipient wetness method and applied to preferential oxidation of CO in hydrogen-rich gases. N2 adsorption-desorption, SEM, XRD, TEM, CO chemisorption and H2 -TPR techniques were employed to characterize the catalysts. The results indicate that Ru/Al2O3 catalysts have meso-macroporous structure, high surface area and high metal dispersion. The characterization results of XRD and CO chemisorption indicate the entry of Ru ions into Al2O3 lattice. The results of catalytic performance tests indicate that the meso-macroporous Al2O3 supported Ru catalysts for CO preferential oxidation showed good activity under high space velocity. It is proposed that the macropores in the Ru/Al2O3 catalyst favor mass transfer and mesopores help to improve the dispersion of metal, resulting in the excellent catalytic performance.     

Autothermal Reforming of Methane over Ni Catalysts Supported on CuO-ZrO2-CeO2-Al2O3

Ni catalysts supported on various mixed oxides of Al2O3 with rare earth oxide and transitional metal oxides were synthesized. The studies focused on the measurement of the autothermal reforming of methane to hydrogen over Ni catalysts supported on the mixed oxide ZrxCe30-xAl70Oδ (x=5, 10, 15). The catalytic performance of Ni/Zr10Ce20Al70Oδ was better than that of other catalysts. XRD results showed that the addition of Zr to Ni/Ce30Al70Oδ prevented the formation of NiAl2O4 and facilitated the dispersion of NiO. Effects of CuO addition to Zr10Ce20Al70Oδ were also investigated. The activity of Ni catalyst supported on CuO-ZrO2-CeO2-Al2O3 was somewhat affected and the Ni/Cu5Zr10Ce20Al65Oδ showed the best catalytic performance with the highest CH4 conversion, yield of H2, selectivity for H2 and H2/CO production ratio in operation temperatures ranging from 650 to 750℃.     

A Review on Complete Oxidation of Methane at Low Temperatures

This paper reviews recent developments in complete oxidation of methane at low temperatures over noble metal catalysts in the past 20 years. The Pd/A1203 catalyst system is fully discussed. The review mainly focuses on the kinetic aspects of methane oxidation over this catalyst, and methane activation behavior over Pd and PdO phases (the form of PdO on the surface, transient behavior, the nature of the active sites, the influence of metal particle size and their structure sensitivities, and so on). Some Pd catalysts supported on other oxides besides the Al2O3 support are briefly discussed. Possible routes of non-noble metal catalysts as substitutes for the Pd catalyst are also proposed.     

Selective Oxidation of Toluene with Hydrogen Peroxide Catalyzed by V-Mo-based Catalyst

The selective catalytic oxidation of toluene with hydrogen peroxide over V-Mo-based catalysts under mild conditions was studied.The promotion effect of Mo on the catalysts was studied with V/Al2O3 and Mo/Al2O3 as reference samples.The catalysts were characterized by XRD,TPR,and XPS techniques.The results show that the addition of Mo to V/Al2O3 may change the distribution of V species on Al2O3 surface.Over V-Mo/Al2O3 catalyst,highly dispersed amorphous V species facilitates benzaldehyde formation,and crystalline V2O5 species increases the conversion of toluene but decreases the selectivity to benzaldehyde,while AlVMoO7 species favors both the conversion of toluene and the formation of cresols.The yield of benzaldehyde depends remarkably on the surface O/Al and Mo/V atomic ratios,and gets to a maximum value of 13.2% with a selectivity of 79.5% at an O/Al atomic ratio of 3.0 and Mo/V atomic ratio of 0.7.     

Effect of CeO2 addition on Ni/Al2O3 catalysts for methanation of carbon dioxide with hydrogen

The Ni-CeO2/Al2O3 catalysts with a nickel content of 15 wt% prepared via impregnating boehmite were found to be highly active and stable for methanation of carbon dioxide with hydrogen at a H2/CO2 molar ratio of 4.The effects of CeO2 content and reaction temperature on the performance of the Ni-CeO2/Al2O3 catalysts were studied in detail.The results showed that the catalytic performance was strongly dependent on the CeO2 content in Ni-CeO2/Al2O3 catalysts and that the catalysts with 2 wt%CeO2 had the highest catalytic activity among the tested ones at 350℃.The XRD and H2-TPR characterizations revealed that the addition of CeO2 decreased the reduction temperature by altering the interaction between Ni and Al2O3,and improved the reducibility of the catalyst.Preliminary stability test of 120 h on stream over the Ni-2CeO2/Al2O3 catalyst at 350℃ revealed that the catalyst was much better than the unpromoted one.     

Effect of composite supports on the methanation activity of Co-Mo-based sulphur-resistant catalysts

The effects of composite supports of CeO2-Al2O3,MgO-Al2O3,TiO2-Al2O3 or ZrO2-Al2O3 on the methanation activity of supported Co-Mo-based sulphur-resistant catalysts were investigated.The catalysts were further characterized by nitrogen adsorption measurement,X-ray diffraction and X-ray photoelectron spectroscopy.The catalyst of 5%CoO-15%MoO3 supported on CeO2-Al2O3,MgO-Al2O3,TiO2-Al2O3 or ZrO2-Al2O3 composite oxides,respectively,showed different catalytic performances of syngas methanation in the presence of hydrogen sulphide as compared with that of the 5%CoO-15%MoO3/Al2O3 catalyst.The Co-Mo/CeO2-Al2O3 catalyst shows the highest methanation activity among the tested catalysts.The enhanced methanation activity may be attributed to the improvement of the dispersion of active metal species and the inhibition of the formation of S6+.     

Effect of aluminum modification on catalytic properties of PtSn-based catalysts supported on SBA-15 for propane dehydrogenation

The catalytic properties of PtSn-based catalysts supported on siliceous SBA-15 and Al-modified SBA-15, such as Al-incorporated SBA-15 (AlSBA-15) and alumina-modified SBA-15 (Al2O3/SBA-15), for propane dehydrogenation were investigated. Al2O3/SBA-15 was prepared either by an impregnation method using aluminum nitrate aqueous solution, or by the treatment of SBA-15 with a Al(OC3H7)3 solution in anhydrous toluene. N2-physisorption, FT-IR spectroscopy, solid-state 27Al MAS NMR spectroscopy, hydrogen chemisorption, XRF, NH3 temperature-programmed desorption, X-ray photoelectron spectroscopy and TPO were used to characterize these samples. Among these catalysts, the PtSn-based catalyst supported on Al2O3/SBA-15, which was grafted with Al(OC3H7)3, exhibited the best catalytic performance in terms of activity and stability The possible reason was due to the high Pt metal dispersion and/or the strong interactions among Pt, Sn, and the support.     

Effect of Ni Loading and Reaction Conditions on Partial Oxidation of Methane to Syngas

The partial oxidation of methane to synthesis gas is studied in this paper over Ni/Al2O3 catalysts under atmospheric pressure. The effects of Ni loading on the activity and stability of catalysts with 5 mm α-Al2O3 and θ-Al2O3 pellets as supports were measured in a continuous fixed bed reactor. It is found that the optimum Ni loading is 10%. And the effect of reaction conditions on partial oxidation of methane is also studied. The methane conversion and CO selectivity increase with the increase of the reaction temperature and the space velocity on 10%Ni/α-Al2O3 catalysts. The best CH4/O2 mole ratio is 2 for CO selectivity, and the optimum space velocity is 5.4x105 h-1.     

Screening of MgO- and CeO_2-Based Catalysts for Carbon Dioxide Oxidative Coupling of Methane to C_(2+) Hydrocarbons

The catalyst screening tests for carbon dioxide oxidative coupling of methane (CO2-OCM) have been investigated over ternary and binary metal oxide catalysts. The catalysts are prepared by doping MgO- and CeO2-based solids with oxides from alkali (Li2O), alkaline earth (CaO), and transition metal groups (WO3 or MnO). The presence of the peroxide (O2-2) active sites on the Li2O2, revealed by Raman spectroscopy, may be the key factor in the enhanced performance of some of the Li2O/MgO catalysts. The high reducibility of the CeO2 catalyst, an important factor in the CO2-OCM catalyst activity, may     

Methane conversion by various metal, metal oxide and metal carbide catalysts

The progress in the field of methane conversion into higher hydrocarbons including aromatics and oxygenated compounds in the recent five years will be reviewed shortly, together with a new type of the methane conversion reaction with carbon monoxide at lower temperatures (600–700 K) by supported group VIII metal catalysts. Benzene was formed selectively among hydrocarbons in the CH₄–CO reaction over silica-supported Rh, Ru, Pd and Os catalysts under atmospheric pressure. Both CH₄ and CO were required for benzene formation, and only ethane and ethylene were formed besides benzene. The amount of C₃–C₅ hydrocarbons was negligible, which suggests that a completely different mechanism from the CO–H₂ reaction may be operating over these catalysts despite of the similarity in the reaction conditions with the CO–H₂ reaction. The mechanism of benzene formation was studied deeply by means of kinetical investigation as well as infrared spectroscopy and isotopic tracer method in connection with that of CO hydrogenation.     

金属氧化物对十氯联苯的降解研究

分别以市售的Fe2O3、MgO和CaO为催化剂,对十氯联苯(CB209)进行了催化降解研究.结果表明,MgO对CB209的降解具有较高的活性.在反应温度为300℃,反应时间为60 min时,MgO对CB209的降解效率达到98.9%.进一步研究表明,MgO催化降解CB209的动力学符合准一级动力学反应.通过GC-MS和GC-ECD,并结合衍生化实验,检测到九氯联苯、五氯苯和四氯苯、五氯苯酚、四氯苯酚和三氯苯酚等降解产物,进而推测出MgO催化降解CB209的过程中存在相互竞争的反应路径:氧化反应、碳碳桥键断裂和加氢脱氯.     

Versatile PEG-derivatized phosphine oxide ligands for water-dispersible metal oxide nanocrystals

We report the simple synthesis of poly(ethylene glycol)(PEG)-derivatized phosphine oxide ligands for water-dispersible metal oxide nanocrystals.     

Molecular assembly of rubrene on a metal/metal oxide nanotemplate

We investigated the adsorption properties and self-assembly of rubrene molecules on the copper oxide nanotemplate formed by high-temperature exposure of Cu(110) to molecular oxygen. Using high-resolution scanning tunneling microscopy under ultrahigh-vacuum conditions, we observed a complex variety of self-assembled motifs, driven by competing effects such as the chemical affinity between the organic molecule and the surface, surface coverage, and spatial confinement of the rubrene molecules within the rows of the template.     

Aqueous solvation dynamics at metal oxide surfaces

Broadband transient absorption (TA) spectroscopy, three-pulse photon echo peak shift (3PEPS), and anisotropy decay measurements were used to study the solvation dynamics in bulk water and interfacial water at ZrO(2) surfaces, using Eosin Y as a probe. The 3PEPS results show a multiexponential behavior with two subpicosecond components that are similar in bulk and interfacial water, while a third component of several picoseconds is significantly lengthened at the interface. The bandwidth correlation function from TA spectra exhibits the same behavior, and the TA spectra are well reproduced using the doorway-window picture with the time constants from PEPS. Our results suggest that interfacial water is restricted to a thickness of less than 5 A. Also the high-frequency collective dynamics of water does not seem to be affected by the interface. On the other hand, the increase of the third component may point to a slowing down of diffusional motion at the interface, although other effects, may play a role, which are discussed.     

Redox reactions in transition metal oxide gels

Transition metal ions are known to exhibit several oxidation states so that redox reactions can take place during the sol-gel synthesis of the corresponding oxides. The reduction of molecular precursors increases the size of the metal cation, favoring coordination expansion and the formation of condensed species. Electron delocalization through the oxide network is responsible for the electrical, optical, and electrochemical properties of transition metal oxide gels. Moreover the large surface/volume ratio — due to the small size of the solid particles — leads to a whole range of ion and electron exchange reactions at the oxide/water interface of transition metal oxide colloids.     

Aromaticity in transition metal oxide structures.

The concept of aromaticity is useful for understanding the properties of some polyoxometalates containing transition metals such as vanadium, molybdenum, and tungsten having structures based on metal macropolygons and macropolyhedra with M-O-M edges. Thus, the aromatic macrocuboctahedral Keggin ions readily undergo one-electron reductions to highly colored mixed-valence "blues" (e.g., molybdenum blue), whereas the macroicosahedral Silverton ions, M(IV)Mo12O42(8-) (M(IV) = Ce, Th, U), which, like cyclohexane, do not have vertex valence orbitals available for delocalization, do not undergo analogous reduction reactions. A macrohexagon of d1 vanadium(IV) atoms as V-O-V units has been imbedded into an electronically inactive borate matrix in the ion [V6B20O50H8](8-). The small beta unit for the V-O-V interactions in this V6 macrohexagon leads to an unprecedented example of high spin aromaticity with a paramagnetism corresponding to four unpaired electrons per V6 unit in contrast to benzene, which is diamagnetic and hence exhibits low spin aromaticity. The M-O-M interactions in these aromatic metal oxides are closely related to the Cu-O-Cu interactions in the high critical temperature superconducting copper oxides which are essential to the electron transport in these systems.     

Surfactant-free nonaqueous synthesis of metal oxide nanostructures

Surfactant-free nonaqueous (and/or nonhydrolytic) sol-gel routes constitute one of the most versatile and powerful synthesis methodologies for nanocrystalline metal oxides with high compositional homogeneity and purity. Although the synthesis protocols are particularly simple, involving only metal oxide precursors and common organic solvents, the obtained uniform nanocrystals exhibit an immense variety of sizes and shapes. The small number of reactants in these routes enables the study of the chemical mechanisms involved in metal oxide formation. Nonhydrolytic routes to inorganic nanomaterials that used surfactants as size- and shape-controlling agents have been discussed recently. This Minireview supplements this topic by discussing surfactant-free processes, which have become a valuable alternative to surfactant-assisted as well as to traditional aqueous sol-gel chemistry routes.     

Characterization of oxide supported metal carbonyl clusters

The chemisorption of [Ma₃(CO)_{1 2}] on silica (M = Ru and Os) and alumina (M = Os) has been studied by vibrational and X-ray absorption spectroscopies making close comparisons with model compounds. The results indicate that the first chemisorption species observed has the form [M₃H(CO)₁₀(O---O)]; the bridging hydride was observed directly for the silica systems as evidenced by the M-H-M bending vibration in the i.r. Also consistent with this structure are the EXAFS analysis of the Ru/SiOz material. This indicated an essentially equilateral ruthenium triangle and coordination to oxygen. The published low frequency Raman data on the Os/Al2Oa product was shown to match most closely with that of model compounds with a bidentate oxygen donor ligand (acac or O2CR). The tethered cluster [O_s3H₂(CO)₉(PPh₂C₂H₄SIL)] was found to be a relatively short lived species on a silica surface. Under ambient conditions it reacts further and the i.r., EXAFS and ³¹P NMR data of this species suggest that the two osmium atoms not coordinated to the tethering phosphine become involved with a bidentate site from the surface.     

Direct thermal decomposition of metal nitrates in octadecylamine to metal oxide nanocrystals

We have developed a method for the synthesis of metal oxide nanocrystals with controllable shape and size, which is based on the direct thermal decomposition of metal nitrates in octadecylamine. Mn3O4 nanoparticles and nanorods with different lengths were synthesized by using manganese nitrate as the decomposition material. Other metal oxide nanocrystals such as NiO, ZnO, CeO2, CoO, and Co3O4 were also prepared by this method. These nanocrystals were then assembled into 3D colloidal spheres by a surfactant-assisted self-assembly process. Subsequently, calcination was carried out to remove the surfactants to obtain mesoporous metal oxides, which show large pores, good crystallization, thermally stable pore mesostructures, and potential applications in various fields, especially in catalysis and lithium-ion batteries.