Effect of supports on activity and stability of Pt–Pd catalysts for oxygen reduction reaction in proton exchange membrane fuel cells

The platinum–palladium alloy (Pt–Pd) catalysts were prepared on various supports including Vulcan XC72, Hicon Black (HB), multiwalled carbon nanotubes (MWCNTs), and titanium dioxide (TiO₂) by a combined approach of impregnation and seeding using NaBH₄ reduction at low temperature. Their oxygen reduction reaction (ORR) activities in single proton exchange membrane fuel cell (PEMFC) under a H₂/O₂ environment and their stability in an acid electrolyte (0.5 M H₂SO₄) were tested and compared with the Vulcan XC72-supported Pt (Pt/C) catalysts. The presence of the Pd metal as well as different types of supports affected the ORR activity in H₂/O₂ environment and stability in the acid electrolyte. Overall, the HB-supported Pt–Pd (Pt–Pd/HB) catalysts provided the highest current density at 0.6 V under a H₂/O₂ environment, while the MWCNT-supported Pt–Pd (Pt–Pd/MWCNT) catalyst provided the best stability in an acid electrolyte.     

Nanostructure and surface composition of Pt and Ru binary catalysts on polyaniline-functionalized carbon nanotubes

Pt-Ru binary catalysts were prepared on a polyaniline-functionalized multiwalled carbon nanotube (PANi/MWCNT). PANi/MWCNT composites were synthesized by the polymerization of aniline in the presence of a carbon nanotube suspension using FeSO(4) and (NH(4))(2)S(2)O(8) as the oxidants. The Pt-Ru/PANi/MWCNT catalysts were formed by the chemical reduction of H(2)PtCl(6) and RuCl(3) using NaBH(4) as the reducing agent. The binary component catalyst is sharply distributed, with particle sizes ranging from 2.0 to 4.0 nm, and the Pt and Ru distributions are homogeneous when supported on PANi/MWCNT. In comparison, the binary catalyst supported on bare MWCNT displayed a Pt-rich core and a Ru-rich shell nanostructure. The surface composition deduced from CO stripping potentials confirms that the Ru surface content (χ(Ru)) is approximately 50% for the Pt-Ru alloy on PANi/MWCNT, and the catalyst on bare MWCNT shows nearly 70% Ru on the surface. Pt-Ru binary catalysts supported on PANi/MWCNT have higher activity, a higher Pt utilization efficiency, and much better durability when compared to other catalyst supports on bare MWCNT or on Vulcan XC-72.     

Supercritical,Freezing and Thermal Drying Process of Resorcinol‐Formaldehyde Polymer based Nano‐carbons and their Highly Loaded PtRu Anode Electrocatalyst for DMFC

The capillary condensation is affected by micropore and nanopore of catalyst layer on fuel cell. Due to limitation of sluggish mass transport and electrocatalytic activity, to retain the pore skeleton of carbon and metal nanoparticles are very significant for enhanced utilizations of pore structure in electrochemical reaction. Besides, thickness of electrocatalyst layer is very crucial due to one of the factor affected by cell performance of direct methanol fuel cell. Highly loaded four Pt?Ru anode catalysts supported on resorcinol‐formaldehyde (RF) polymer based on meso‐porous carbons (80 wt.% Pt?Ru/carbon cryogel, 80 wt.% Pt?Ru/carbon xerogel and 80 wt.% Pt?Ru/carbon aerogel) and conventional carbon (80 wt.% Pt?Ru/Vulcan XC‐72) were prepared by colloidal method for direct methanol fuel cell. These catalysts were characterized by X‐Ray diffraction (XRD), High resolution transmission electron microscopy (HR‐TEM) and X‐ray photoemission (XPS). The results of CO stripping voltammetry, cyclic voltammetry (CV) and single cell test performed on DMFC show that Pt?Ru/carbon cryogel and Pt?Ru/carbon aerogel exhibits better performances in comparison to Pt?Ru/carbon xerogel and Pt?Ru/Vulcan XC‐72. It is thus considered that particle size, oxidation state of metal and electrochemical active surface area of these catalysts are important role in electrocatalytic activity in DMFC.     

分级结构氮掺杂碳纳米笼担载的铂基高效甲醇氧化电催化剂

高性能低成本的担载型铂基催化剂是直接甲醇燃料电池(DMFC)实用化过程中的一大挑战.利用高比表面积、高稳定性、容易负载金属的载体实现 Pt颗粒的高度分散,既可提高催化剂的催化性能,又可提高 Pt的利用率以降低成本,是担载型 Pt基催化剂实用化的有效途径.碳材料是一种常用的催化剂载体,近年来我们课题组发展了一种高性能的碳纳米笼材料,并可通过异原子掺杂调变其表面性能,提高其活性和负载能力.我们采用原位氧化镁模板法制备氮掺杂碳纳米笼：以具有多级结构的碱式碳酸镁作为氧化镁模板的前体,吡啶为碳源和氮源,经高温热解沉积,在原位形成的氧化镁模板表面形成氮掺杂的石墨化碳纳米薄层;经稀盐酸浸泡并洗涤,获得高纯度的氮掺杂碳纳米笼.氮掺杂碳纳米笼具有分等级的微纳米结构、高导电性、高比表面积和可调变的孔结构,结合表面氮原子的锚钉作用,氮掺杂碳纳米笼有望成为电化学催化剂 Pt的优良载体.
　　在前期研究基础上,本文探索多级结构氮掺杂碳纳米笼(hNCNC)作为新型载体负载 Pt的能力,并评价所构建的负载型催化剂 Pt/hNCNC的电催化性能.通过简便的微波辅助多元醇还原法,将氯铂酸还原成 Pt纳米粒子负载于 hNCNC的表面.为了揭示氮掺杂的效应,我们对比研究了具有相似分级结构但无掺杂的碳纳米笼(hCNC)以及商业化活性炭(Val-can XC-72)作为载体的情况.经热重(TG)和 X射线光电子能谱(XPS)分析,三种催化剂 Pt/hNCNC、Pt/hCNC和 Pt/XC-72的负载量均接近理论负载量(23.1 wt%),都主要以金属态存在.然而,扫描电子显微镜(SEM)和透射电子显微镜(TEM)结果表明, Pt/hNCNC的 Pt分散状态优于 Pt/hCNC,更远优于 Pt/XC-72. Pt/hNCNC的平均 Pt粒径最小,仅约3.3 nm.这种良好的分散状态主要得益于氮原子掺杂,高负电性的氮原子改变了局域的表面极性,有利于 Pt颗粒的成核,也有利于固定 Pt颗粒.
　　由于 hNCNC对 Pt的优异分散能力, Pt/hNCNC表现出高的电化学活性面积.氢吸附和一氧化碳溶出伏安曲线表明, Pt/hNCNC的电化学活性面积高于 Pt/hCNC和 Pt/XC-72,这与显微观察和 X射线衍射(XRD)结果相吻合. Pt/hNCNC展现出优异的甲醇电催化氧化活性和高稳定性,其催化电流明显高于 Pt/hCNC和 Pt/XC-72,电流衰减亦慢于 Pt/hCNC和 Pt/XC-72. hNCNC的分级微纳米结构有利于孔内传质和电子输运,从而提高反应速度. hNCNC的氮掺杂有利于 Pt在载体表面的分散,增强了载体-金属相互作用,提高了电化学活性面积和催化活性.为了进一步考察 hNCNC对 Pt的负载能力,本文还考察了高负载量 Pt/hNCNC的性能.在负载量高达60 wt%时, Pt/hNCNC中的 Pt颗粒仍无明显聚集,其甲醇氧化电流增加了30%,可以有效提高 DMFC的输出电流密度.
　　综上可见, hNCNC可以有效分散并稳定 Pt颗粒,从而提高电化学活性面积和甲醇电催化氧化活性,优于未掺杂的碳纳米笼和传统碳材料,展示了 hNCNC高分散 Pt颗粒用作 DMFC的高效阳极催化剂的重要前景,也表明 hNCNC有望成为应用广泛的新型载体.     

Stabilization of high-performance oxygen reduction reaction pt electrocatalyst supported on reduced graphene oxide/carbon black composite

Oxygen reduction reaction (ORR) catalyst supported by hybrid composite materials is prepared by well-mixing carbon black (CB) with Pt-loaded reduced graphene oxide (RGO). With the insertion of CB particles between RGO sheets, stacking of RGO can be effectively prevented, promoting diffusion of oxygen molecules through the RGO sheets and enhancing the ORR electrocatalytic activity. The accelerated durability test (ADT) demonstrates that the hybrid supporting material can dramatically enhance the durability of the catalyst and retain the electrochemical surface area (ECSA) of Pt: the final ECSA of the Pt nanocrystal on the hybrid support after 20?000 ADT cycles is retained at >95%, much higher than the commercially available catalyst. We suggest that the unique 2D profile of the RGO functions as a barrier, preventing leaching of Pt into the electrolyte, and the CB in the vicinity acts as active sites to recapture/renucleate the dissolved Pt species. We furthermore demonstrate that the working mechanism can be applied to the commercial Pt/C product to greatly enhance its durability.     

Identical-location Transmission Electron Microscopy of Pt Nanoparticle Electrocatalysts Using Iridium-coated Au Grids for Fuel Cell Durability Tests Simulating Start-up and Shutdown Conditions

In an identical-location TEM (IL-TEM) analysis of an electrocatalyst, an Au grid is usually selected owing to its chemical stability under potential cycling conditions. A potential cycle between 1.0 and 1.5 V is applied to the catalyst-cast Au grid for cathode durability testing that simulates the start-up and shutdown conditions of fuel cells. Because of the redox potential of Au (1.36 V vs. RHE), the grid dissolves and redeposits on the catalyst under the applied potential, making it complicated to evaluate the catalyst nanoparticle shape and size after degradation. We fabricated an Au grid coated with an iridium oxide layer (Ir-coated Au grid) to suppress the dissolution of Au. The Ir-coated Au grid with carbon support was compared to the Au grid to confirm the effect of the iridium oxide layer. No Au deposition was observed, even after 3000 cycles at 60 °C for the Ir-coated Au grid, but Au was deposited on carbon on the Au grid after 1000 cycles. Consequently, the alkylamine-modified Pt nanoparticle catalyst (unwashed catalyst) was observed along with the Ir-coated Au grid using IL-TEM under durability tests simulating start-up and shutdown conditions. A catalyst with less alkylamine content was prepared by butylamine washing (washed catalyst) and observed using IL-TEM for comparison. The Pt nanoparticles of the washed catalyst aggregated and changed their morphology after 1000 cycles, while the alkylamine-modified nanoparticles of the unwashed catalyst almost maintained their original size and shape up to 1000 cycles. The Ir-coated gold grids allow proper IL-TEM analysis of catalysts in durability tests without the interference of Au dissolution.     

CoPy/C催化剂应用碱性介质氧还原催化的电化学性能

利用碳黑（Vulcan XC-72R）中加入硫酸钴和吡啶（Py）作为催化剂前驱体,经溶剂分散热处理构建了一类新型的高效氧还原CoPy/C复合催化剂.并运用循环伏安法（CV）和旋转圆盘电极（RDE）技术研究了不同Co含量的CoPy/C催化剂在碱性介质中对氧还原的电催化活性.结果表明:Co的存在对氧的催化剂活性位的形成有重要影响,800℃下所制备的10%Co30%Py/C（质量分数）复合催化剂表现出最佳的氧还原催化活性.以其制备的气体扩散电极在3.0 mol·L^-1KOH电解质溶液（O₂气氛）中0.014 V（相对于标准氧电极（RHE））即可产生明显的氧还原电流.同40%Py/C相比,10%Co30%Py/C催化氧还原的起峰电位正移了71 mV,同时表现出明显的极限扩散电流.在-0.16 V时电流密度达到最大值,电流密度为1.0 mA·cm^-2,半波电位在-0.07 V.透射电镜分析表明所制备的碳黑载吡啶钴（10%Co30%Py/C）催化剂平均粒径为20 nm.     

多尺度炭材料担载铂作为稳定的电催化剂用于氧还原反应

炭载体的稳定性对于燃料电池电催化剂是至关重要的. 本文中采用酚醛树脂作为前驱体,二氧化硅为模板剂,制备了多介孔且石墨化程度高的炭载体（HGMC）. 相比于商品Vulcan XC-72,HGMC具有中等的比表面积和高的石墨化程度,因此在电位循环扫描过程中具有较高的化学稳定性,然而HGMC碳层堆叠的结构不利于传质. 为克服这一劣势,多壁碳纳米管（MWCNTs）作为隔离物加入至HGMC中以构建具有三维多尺度结构的载体（MSGC）. 与HGMC为载体担载Pt以及商品催化剂Pt/C-JM相比,由于炭载体的具有高稳定性以及三维多尺度结构,MSGC担载Pt后不仅使电催化剂的电化学稳定性提高,且氧还原反应过程中传质得到显著改善.     

Enhanced electrocatalytic oxygen reduction through electrostatic assembly of Pt nanoparticles onto porous carbon supports from SnCl2-stabilized suspensions

Monodisperse Pt nanoparticles with atomic structures that span the cluster to crystal transition have recently been synthesized in electrostatically stabilized, aqueous-based suspensions. In the present study, the anionic charge from the stabilizing SnCl(2) sheath adsorbed on the surface of these particles is used for the first time to assemble Pt directly onto porous carbon supports via electrostatic assembly. High-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) reveals that these assemblies have substantially higher Pt-C dispersions than obtained from precipitation methods commonly used for commercial electrocatalyst systems. Energy dispersive spectroscopy (EDS) and inductively coupled plasma-mass spectrometry (ICP-MS) are used to determine that loadings of 10-30% by weight Pt (particle packing fractions from 0.05 to 0.25) are obtained through a single electrostatic application of these particles on Vulcan carbon, depending on particle size. The highest average oxygen reduction reaction (ORR) mass activity obtained using this approach is 90.4 A/g(Pt) at 0.9 V vs RHE in 0.1 M perchloric acid is with 1-2 nm particles that exhibit a transitional atomic structure. This activity compares to an average value of 74.0 A/g(Pt) obtained from densely packed electrostatic layer-by-layer (LbL) assemblies of unsupported particles and 36.7 A/g(Pt) commercial Vulcan electrocatalyst from Tanaka Kikinzoku Kogyo (TKK). Enhanced activity is observed with electrostatic assembly of any particle size on Vulcan relative to unsupported or commercial electrocatalyst with comparable durability. Such enhanced activity is attributed to improved reactant accessibility to the catalyst surface due to the increase in particle dispersion. An extinction coefficient of 7.41 m(2)/g at 352 nm is obtained across the entire cluster to crystal transition from 20 atom clusters to 2.9 nm single crystal nanoparticles, indicating that observed variation in ORR activity with particle size may be associated primarily with changes in atomic surface structure as opposed to the metallic character of the nanoparticles as assessed by UV-vis spectroscopy.     

大孔碳载Ir催化剂对氨氧化的电催化性能

分别以大孔炭(MC)和Vulcan XC-72炭黑(XC)为载体,制备了Ir/MC和Ir/XC催化剂。 在用X射线能量色散谱(EDS)、X射线衍射(XRD)谱、拉曼光谱对催化剂表征的基础上,用电化学技术研究了2种炭载Ir催化剂对氨氧化的电催化性能,发现氨在Ir/MC催化剂电极上,氧化峰峰电流密度比在Ir/XC催化剂电极上大38.7%左右,而且电催化稳定性明显好于Ir/XC催化剂。 由于Ir/MC和Ir/XC催化剂的Ir粒子平均粒径和相对结晶度相似,因此,这只能归结于MC有大的孔径和孔率及高的石墨化程度引起的高电导率。 所以MC是一种比XC更好的催化剂的炭载体。     

大孔炭载Pd催化剂对甲酸氧化的电催化性能

用X射线能量色散谱(EDS)、X射线衍射(XRD)谱、拉曼光谱和电化学技术研究和比较了直接甲酸燃料电池(DFAFC)中Vulcan XC-72炭黑载Pd (Pd/XC)和大孔炭载Pd (Pd/MC)催化剂对甲酸氧化的电催化性能. 循环伏安曲线测量表明甲酸在Pd/XC和Pd/MC催化剂电极上主要氧化峰的峰电位基本相同, 在0.15 V左右, 但在Pd/MC催化剂电极上的峰电流密度比在Pd/XC催化剂上的大30%左右. 计时电流曲线测量表明, 在6000 s时, 在Pd/MC催化剂电极上的峰电流密度比在Pd/XC催化剂上的大38%左右, 这些结果说明Pd/MC催化剂对甲酸氧化的电催化活性和稳定性要好于Pd/XC催化剂. 由于Pd/MC和Pd/XC催化剂的Pd粒子平均粒径和相对结晶度相似, 因此, Pd/MC催化剂电催化性能好的原因只能归结于MC大的孔径和高的石墨化程度引起的高电导率.     

新型钴-聚吡咯-碳载Pt燃料电池催化剂的制备与表征

采用脉冲微波辅助化学还原法制备了钴-聚吡咯-碳(Co-PPy-C)载Pt催化剂(Pt/Co-PPy-C),其中Pt的总质量占20%.利用透射电镜(TEM)、光电子射线能谱分析(XPS)和X射线衍射(XRD)研究了催化剂的结构,用循环伏安(CV)、线性扫描伏安(LSV)等方法考察了其电化学活性及氧还原反应(ORR)动力学特性及耐久性.Pt/Co-PPy-C电催化剂的金属颗粒直径约1.8 nm,略小于商用催化剂Pt/C(JM)颗粒尺寸(约2.5 nm);催化剂在载体上分散均匀,粒径分布范围较窄.Pt/Co-PPy-C的电化学活性比表面积(ECSA)(75.1 m2·g-1)高于商用催化剂的ECSA(51.3 m2·g-1).XPS测试表明,自制催化剂表面的Pt主要以零价形式存在.而XRD结果显示,自制催化剂中Pt(111)峰最强,Pt主要为面心立方晶格.Pt/Co-PPy-C具有与Pt/C(JM)相同的半波电位;在0.9 V下,Pt/Co-PPy-C的比活性(1.21 mA·cm-2)高于商用催化剂的比活性(1.04 mA·cm-2),表现出更好的ORR催化活性.动力学性能测试表明催化剂的ORR反应以四电子路线进行.CV测试1000圈后,Pt/Co-PPy-C和Pt/C(JM)的ECSA分别衰减了13.0%和24.0%,可见自制催化剂的耐久性高于商用Pt/C(JM),在质子交换膜燃料电池(PEMFC)领域有一定的应用前景.     

大孔碳载Ir催化剂对氧还原的电催化性能和抗甲酸能力

本文用X射线能量色散谱(EDS)、X射线衍射(XRD)谱、拉曼光谱和电化学等技术研究了直接甲酸燃料电池(DFAFC)中Vulcan XC-72炭黑载Ir(Ir/XC)和大孔炭载(Ir/MC)催化剂对氧还原的电催化性能和抗甲酸的能力。发现Ir/MC催化剂对氧还原的电催化性能要优于Ir/XC催化剂,氧起始还原电位比在Ir/XC催化剂上正移0.1V,极限电流密度比在Ir/XC催化剂上大30％左右。由于Ir/MC和Ir/XC催化剂的Ir粒子平均粒径和相对结晶度相似,因此,这只能归结于MC有大的孔径和孔率及高的石墨化程度。另外2种催化剂都有很好的抗甲酸能力。因此MC是一种比XC更好的催化剂的炭载体。     

Activity evaluation of carbon paste electrodes loaded with pt nanoparticles prepared in different radiolytic conditions

Three Pt-based catalysts prepared in different radiolytic conditions and supported on graphite powder were packed into a carbon paste electrode configuration. They were compared to each other, to the commercial (Pt) deposited on activated carbon powder (Johnson Matthey) and to pure Vulcan XC-72 for their respective abilities toward the hydrogen evolution reaction (HER). The Tafel parameters were determined for all these electrodes. From the I–V curves and their quantitative treatment, the following order of activity emerged unambiguously and reads: (PtCO)₂ (fcc structure) > (PtCO)₁ (Chini cluster) > (Pt)_neat > (Pt)_JM (Johnson Matthey) ≫ (Vulcan XC-72). As expected, all the Pt-loaded electrodes were more efficient than Vulcan XC-72. The classification appears to be linked with the mean nanoparticle size, and for comparable sizes, with the surface morphology of the materials. The results and the stability of the electrodes suggest that the small particle sizes and the good dispersity on the carbon support were maintained during the HER.     

High-loading Pt nanoparticles on mesoporous carbon with large mesopores for highly active methanol electro-oxidation

High metal-loading Pt/C electrocatalysts are important for the fabrication of thin-layered membrane electrode assemblies (MEAs). However, the preparation of high-loading Pt catalysts with a narrow size distribution of nanoparticles remains a challenge. Herein, ordered mesoporous carbon (OMC) with large mesopores (~15 nm) and a high surface area (1316.0 m² g^?1) was fabricated using a SiO₂ nanosphere array as a template. This material was developed to support a high loading of Pt nanoparticles (60 wt%) and was then used as an electrocatalyst for the methanol oxidation reaction (MOR). The prepared Pt/OMC contains Pt nanoparticles with an average size of ~1.9 nm that are uniformly dispersed on the mesoporous walls of the OMC. The Pt/OMC catalyst exhibits smaller Pt nanoparticle size, greater Pt dispersion, larger specific electrochemically active surface area (ECSA), and higher electrocatalytic activity for the MOR than the carbon black (Vulcan XC-72R)-supported Pt and the commercial Pt/C catalysts.     

Carbon Corrosion in Proton-Exchange Membrane Fuel Cells: Spectrometric Evidence for Pt-Catalysed Decarboxylation at Anode-Relevant Potentials

The carbon oxidation reaction (COR) is a critical issue in proton-exchange membrane fuel cells (PEMFCs), as carbon in various forms is the most used electrocatalyst support material. The COR is thermodynamically possible above the C/CO₂ standard potential, but its rate becomes significantly important only at high overpotential (e. g. PEMFC cathode potential). Herein, using on-line differential electrochemical mass spectrometry, we show that oxygen-containing carbon surface groups present on high-surface aera carbon, Vulcan XC72 or reinforced graphite are oxidized at PEMFC anode-relevant potential (E=0.1 V vs. the reversible hydrogen electrode, RHE), but not at E=0.4 V vs. RHE. We rationalized our findings by considering a Pt-catalysed decarboxylation mechanism in which Pt nanoparticles provide adsorbed hydrogen species to the oxygen-containing carbon surface groups, eventually leading to evolution of carbon dioxide and carbon monoxide. These results shed fundamental light on an unexpected degradation mechanism and facilitate the understanding of the long-term stability of PEMFC anode nanocatalysts.     

新型钴-聚吡咯-碳载Pt燃料电池催化剂的制备与表征

采用脉冲微波辅助化学还原法制备了钴-聚吡咯-碳（Co-PPy-C）载Pt 催化剂（Pt/Co-PPy-C）,其中Pt 的总质量占20%. 利用透射电镜（TEM）、光电子射线能谱分析（XPS）和X射线衍射（XRD）研究了催化剂的结构,用循环伏安（CV）、线性扫描伏安（LSV）等方法考察了其电化学活性及氧还原反应（ORR）动力学特性及耐久性. Pt/Co-PPy-C电催化剂的金属颗粒直径约1.8 nm,略小于商用催化剂Pt/C（JM）颗粒尺寸（约2.5 nm）;催化剂在载体上分散均匀,粒径分布范围较窄. Pt/Co-PPy-C的电化学活性比表面积（ECSA）（75.1 m²·g^-1）高于商用催化剂的ECSA（51.3 m²·g^-1）. XPS测试表明,自制催化剂表面的Pt 主要以零价形式存在. 而XRD结果显示,自制催化剂中Pt（111）峰最强,Pt 主要为面心立方晶格. Pt/Co-PPy-C具有与Pt/C（JM）相同的半波电位;在0.9 V下,Pt/Co-PPy-C的比活性（1.21 mA·cm^-2）高于商用催化剂的比活性（1.04 mA·cm^-2）,表现出更好的ORR催化活性.动力学性能测试表明催化剂的ORR反应以四电子路线进行. CV测试1000 圈后,Pt/Co-PPy-C和Pt/C（JM）的ECSA 分别衰减了13.0%和24.0%,可见自制催化剂的耐久性高于商用Pt/C（JM）,在质子交换膜燃料电池（PEMFC）领域有一定的应用前景.     

酸处理石墨化碳载体对燃料电池催化剂性能的影响

通过1700 ℃高温处理XC-72CB得到石墨化碳黑(GCB), 并采用酸处理对GCB碳载体进行官能团修饰. 透射电子显微镜(TEM)、 X射线粉末衍射(XRD)和拉曼光谱的结果显示, 酸处理后GCB的石墨化程度增加; N₂吸附-脱附结果证明GCB比表面积减小, 微孔数量减少; 热重分析结果表明, GCB热稳定性增强; 红外光谱和拉曼光谱结果显示, GCB表面引入了含氧官能团, 并同时保持了GCB的有序化结构. 采用循环伏安(CV)法和线性扫描伏安(LSV)法测试了不同预处理后催化剂的电化学性能, 表明其电化学活性表面积(ECSA, 75.25 m²/g)和质量比活性(MA, 0.093 A/mg)均高于商业Pt/C(JM)催化剂. TEM结果表明, 使用经过浓硫酸和浓硝酸混合酸处理的GCB(简称OGCB)作为载体得到的Pt/OGCB平均粒径为2.28 nm, 略小于商业Pt/C(JM)催化剂(约2.5 nm); 经5000周电化学循环伏安测试后, Pt/OGCB的电化学活性表面积衰减17.3%, 质量比活性衰减29.5%, 而Pt/C(JM)的ECSA衰减达到25.1%, MA衰减达到42.5%.     

Development of Nonenzymatic Benzoic Acid Detection on PdSn/GCE/Vulcan XC‐72R Prepared via Polyol Method

In this study a PdSn based sensor was developed for the determination of benzoic acid (BA) in foods. A carbon (Vulcan XC‐72R) supported PdSn catalyst was prepared via polyol method and its surface electronic and chemical properties were investigated by advanced surface analytical techniques such as scanning electron microscopy (SEM), X‐ray diffraction spectroscopy (XRD), X‐ray Photoelectron Spectroscopy (XPS), temperature‐programmed reduction with H₂ (TPR‐H₂) and transmission electron microscopy (TEM). Electrochemical measurements were performed by employing cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques on PdSn/GCE/Vulcan XC‐72R electrode. The developed sensor showed a wide linear range up to 10 mM with a 0.77 μM low limit of detection (LOD) as well as high stability. Further experiments were performed on food samples containing BA to achieve real sample measurements. For real sample measurements, PdSn/GCE/Vulcan XC‐72R electrode was used for the determination of BA in different kinds of samples such as mayonnaise, ketchup and carbonated beverages.     

Stability of carbon-supported palladium nanoparticles in alkaline media: A case study of graphitized and more amorphous supports

The stability and degradation mechanism of graphitized (Graphene nanosheets) and more amorphous (Vulcan XC-72R) carbon-supported palladium nanoparticles was investigated. Coupling identical-location transmission electron microscopy (ILTEM) and electrochemistry enabled to correlate the distribution of the Pd nanoparticles under accelerated stress test (up to 1000 cycles between 0.1 and 1.23 V vs. RHE, in a 0.1 M NaOH solution at 25 °C) with changes in electrochemical accessible surface area (ECSA). The carbon-supported Pd nanoparticles undergo similar rates of degradation in terms of electrochemical surface areas on both supports. However, their mechanisms of degradation differ: on amorphous carbon, the primary mode of degradation is Pd nanoparticles detachment (and minor agglomeration), whereas on graphitized supports it is more likely their coalescence and dissolution/redeposition. “Bulk” carbon-corrosion is negligible in both cases, as proven by ex situ Raman spectroscopy. So, using a graphitized carbon support (Graphene nanosheets) versus a more amorphous one (Vulcan XC-72R) does not enable to significantly depreciate the Pd/C catalyst degradation in alkaline media.