Solvent extraction of Ni/II/ with isonitrosobenzoylacetone into chloroform

A method has been developed for the quantitative extraction of Ni/II/ with isonitrosobenzoylacetone /HINBA/ into chloroform. The effect of various parameters on the extraction coefficient value such as pH, time of equilibration, effect of solvents, anions, cations etc. have been studied. The stoichiometry of the metal: reagent determined by the method of substoichiometric extraction and slope ratio method was found to be 12. Decontamination factors for many elements in the substoichiometric extraction of Ni/II/ were also evaluated.     

Solvent extraction of Cu/II/ with 1,2,3-benzotriazole into chloroform

1,2,3-Benzotriazole/1,2,3-BT/ has been used for the extraction of Cu/II/ into chloroform. The effect of various parameters on the extraction coefficient of Cu/II/ was evaluated. The stoichiometry of metal:reagent, determined by the method of substoichiometric extraction and slope ratio was found to be 12. Separation factor for a number of elements in the extraction of Cu/II/ has been evaluated.     

A study on the solvent extraction of Cd/II/ with 1,2,3 benzotriazole into n-heptanol

The extraction of cadmium/II/ with 1,2,3 benzotriazole /2-BT/ into n-heptanol has been studied. The effect of various parameters such as effect of pH, time of equilibration, effect of anions on the extraction coefficient values have been evaluated. The stoichiometry of the extracted species by the method of substoichiometric extraction and slope ratio method was found to be 12. Decontamination factors for a number of elements in the substoichiometric extraction of Cd/II/ were also obtained.     

A study on the solvent extraction of Hg/II/ with 2-mercaptobenzothiazole into chloroform

The extraction of mercury/II/ with 2-mercaptobenzothiazole /2-HMBT/ into chloroform has been studied. The effect of various parameters on the extraction coefficient value such as effect of pH, time of equilibration, effect of anions and cations have been evaluated. The stoichiometry of the extracted species obtained by the method of substoichiometric extraction and slope ratio method was found to be 1∶2. Decontamination factors for a number of elements in the substoichiometric extraction of Hg/II/ were also obtained.     

Radiochemical separation of Pd/II/ with isonitrosobenzoylacetone in benzene

The reagent isonitrosobenzoylacetone /HINBA/ was used for the radiochemical separation of Pd/II/ employing solvent extraction. Based on various parameters such as effect of molarity of the acid, time of equilibration and effect of various solvents; the extraction coefficient value of Pd/II/ has been evaluated. The stoichiometry of the metal to reagent was determined by the substoichiometric extraction and slope-ratio method and was found to be 12.     

Solvent extraction of Co/II/ with isonitrosobenzoylacetone into chloroform

A rapid and selective method has been developed for the extraction of Co/II/ with isonitrosobenzoylacetone into chloroform. The effect of various parameters on the extraction coefficient value such as effect of pH, time of equilibration, effect of various cations and anions have been evaluated. The stoichiometry of metal to reagent determined by the method of substoichiometric extraction was found to be 12. It was further supported by the slope ratio method.     

Solvent extraction of zinc/II/ with sulphoxides: Theoretical analysis of extraction behaviour

This paper describes a theoretical method for analyzing the behaviour of⁶⁵Zn during solvent extraction from ammonium thiocyanate solutions with dialkyl sulphoxides. The mechanism of extraction of Zn/II/ from thiocyanate medium by sulphoxides may be represented by the following general equation: $$xM_{aq}^{m + } + ySCN_{aq}^ - + zS_{org} \rightleftharpoons [M_x /SCN/_y ]^{mx - y} .zS_{org} $$ where M^m+ is the metal ion and S is the extractant. Expressions for the distribution coefficients were derived taking into account complexation of the metal in the aqueous phase by inorganic ligands and also the dissociation of the extracted ion-pairs in the organic phase. Using these expressions, the values of the extraction constants were determined by a least-squares fit with the experimental extraction data. From these extraction constants, the various species extracted into the organic phase were resolved. The influence of the metal concentration, temperature and the diluent on the extraction of Zn/II/ has been investigated.     

Radiochemical separation of Mn/II/ with 1,2,3-benzotriazole into 1-octanol employing solvent extraction technique

1,2,3-Benzotriazole /1,2,3-BT/ has been used for the radiochemical separation of Mn/II/ employing solvent extraction technique. Based on various parameters such as pH effect, time of equilibration and effect of various solvents, etc. the ideal conditions for the extraction of Mn/II/ was evaluated. The stoichiometry of the metal to reagent was determined by the substoichiometric extraction and slope-ratio method and found to be 12. The effect of anions on the extraction value of Mn/II/ revealed that a large number of anions do not interfere. Separation factors for various elements were also studied and the extraction found to be selective.     

A study on solvent extraction of Cu/II/ with 2-mercaptobenzothiazole into chloroform

A method has been developed for the rapid and selective extraction of Cu/II/ with 2-mercaptobenzothiazole /2-HMBT/ into chloroform. The effect of various parameters on the extractioncoefficient value have been studied. The stoichiometry of the extracted species of 12 /Cu2-HMBT/ was obtained by the slope ratio method and by the method of substoichiometric extraction.     

A study on the solvent extraction of Pd/II/ with 1,2,3-benzotriazole into methyl iso-butyl ketone

A novel method has been developed for the extraction of Pd/II/ with 1,2,3-benzotriazole /1,2,3-BT/ into methyl isobutyl ketone /MIBK/ at a pH of 4.0. The effects of pH, time of equilibration, solvent, anions and cations on the extraction coefficient have been evaluated. The stoichiometry of the extracted species of 12 was obtained by the slope ratio method and by the method of substoichiometric extraction. Separation factors and decontamination factors for a number of elements in the extraction of Pd/II/ were also obtained.     

Solvent extraction of Mn/II/ with 2-propionyl, 1-naphthol oxime/2-PRONAPOX/ into chloroform

A rapid method has been described for the quantitative extraction of milligram amounts of Mn/II/ with 2-PRONAPOX into CHCl₃. The extraction coefficient /E/ of Mn/II/ between CHCl₃ and aqueous solution containing 0.2M NH₄Cl shows a maximum value of E=143 at pH 10.5. The percentage extraction is better than 98% in the pH range from 9 to 11 and an equilibration time of 6 min. The effects of anions and cations have been studied. The stoichiometry of metal: reagent determined by substoichiometric extraction and slope ratio method is found to be 12. The decontamination factors for most of the elements are better than 10⁴ in the substoichiometric extraction of Mn/II/.     

Solvent extraction of Zn(II), Cu(II) and Sb(III) with N-m-tolyl-p-methoxybenzohydroxamic acid (TMBHA) into chloroform

Rapid methods have been described for the quantitative extraction of milligram amounts of Zn(II), Cu(II) and Sb(III) with TMBHA into chloroform. The separation factor for many elements was found to be at least greater than 10⁴. The metal: reagent stoichiometry determined by methods like slope ratio, mole ratio and substoichiometric extraction were found to be 12 for Zn(II) and Cu(II), and 23 for Sb(III).     

Reversed phase partition chromatographic separation of divalent copper with N-n-octylaniline on silica gel

A novel separation method was developed for the extraction and chromatographic separation of copper(II). The quantative extraction of 25.0–125.0 μg copper(II) has been observed from 0.05 to 0.25 mol/L of ascorbic acid at pH 9.0–12.0 with 0.087 mol/L N-n-octylaniline (liquid anion exchanger) coated on silica gel at a flow rate of 1.0 ml/min. The extracted metal ion has been recovered by eluting with 25.0 ml of 1.0 mol/L hydrochloric acid and determined spectrophotometrically by rubeanic acid method. The various influencing parameters viz. acid concentrations, reagent concentration, eluates effect of pH, and effect of flow rate on extraction were studied. The method is free from large number of interferences from cations and anions. A scheme for mutual separation of copper(II), gold(III) and bismuth(III) has been developed. Copper(II) has been separated from ayurvedic (Herbal) medicine and synthetic mixtures corresponding to alloy. The log–log plot of N-n-octylaniline concentration versus the distribution coefficient indicates that the probable extracted species is [.     

Formation of protonated salicylate complexes of Cd(II) and Zn(II)

The formation constants of the protonated complexes of Cd(II) and Zn(II) with salicylic acid (H₂Sal) and the equilibrium constants for the extraction of these complexes into cyclohexane containing tributyl phosphate (TBP) have been determined. For the complex formation:

log K₁₁ is 1.9 for Cd(II) and 1.4 for Zn(II) at 30°C and 0.1 M NaClO₄. For the extraction:

log K_ex is ?1.6 for Cd(1I) and ?2.2 for Zn(II).     

Functionalization of cross linked chitosan with 2-aminopyridine-3-carboxylic acid for solid phase extraction of cadmium and zinc ions and their determination by atomic absorption spectrometry

We have developed a new method for solid phase extraction (SPE) and preconcentration of trace amounts of cadmium and zinc using cross linked chitosan that was functionalized with 2-aminopyridine-3-carboxy acid. Analytical parameters, sample pH, effect of flow rate, sample volume, and concentration of eluent on column SPE were investigated. The effect of matrix ions on the recovery of cadmium and zinc has been investigated and were found not to interfere with preconcentration. Under the optimum experimental conditions, the preconcentration factors for Cd(II) and Zn(II) were found to be 90. The two elements were quantified via atomic absorption spectrometry. The detection limits for cadmium and zinc are 21 and 65?ng?L^?1, respectively. The method was evaluated by analyzing a certified reference material (NIST 1643e; water) and has been successfully applied to the analysis of cadmium and zinc in environmental water samples.

A new method for the extraction of Hg(II) with thioethylacetoacetate into chloroform

A rapid method for the solvent extraction of Hg(II) into chloroform has been developed, employing thioethylacetoacetate (HETAcAc) as a extracting agent. The extraction of Hg(II) was better than 99% over the pH range 0.3 to 7.3. The extraction equilibrium was reached within 2 min. The effect of various parameters such as anions and cations, solvent effect, etc., on the extraction coefficient has been studied. The stoichiometry metal: reagent was determined by the method of substoichiometric extraction and was found to be 14.     

Solvent extraction of cobalt/II/with 2,4-dihydroxyacetophenone thiosemicarbazone

The extraction of cobalt/II/ from ammonium chloride-ammonium hydroxide buffer solutions of pH 6.5 by 2,4-dihydroxyacetophenone thiosemicarbazone /DATS/ in n-butanol has been studied. Cobalt/II/ forms 11 complex /metal:reagent/ with DATS. Addition of pyridine enhances the extraction. The influence of metal concentration and the effect of diverse ions on the extraction of cobalt/II/ have been investigated.     

Synergic extraction of nickel/II/ by 2-thenoyltrifluoroacetone and tribenzylamine in chloroform from perchlorate media

Synergic extraction of Ni/II/ at pH 1 to 10 was studied using a mixture of 2-thenoyltrifluoroacetone /HTTA/ and tribenzylamine /TBA/ in chloroform. The synergist TBA enhances the extraction of Ni/II/ by an order of 5 from pH 3 to 5 having ionic strength 0.1M /H⁺, ClO ₄ ^– /. The synergic adduct was found to be Ni/TTA/₂.2TBA. The equilibrium constants K_2,0 and K_2,2 and stability constant ₂,2 have been ascertained radiometrically. The influence of various cations and anions on the extraction of Ni/II/ has been examined under optimal conditions. Back extraction of the adduct species in different acids of varying concentrations has been studied.     

Cation thin-layer chromatography in mixed organic solvents containing s-butylamine: Separation of Zn(II) from Cd(II) and Cu(II)

Summary A TLC method has been developed for the separation of Zn(II) from Cd(II) and Cu(II) on silica gel alyers with mixed organic solvents containing s-butylamine. The separation of Zn(II) from Cd(II) in the presence of certain anions and at various pH values of sample solution was examined. A mixture containign s-butylamine, acetone and formic acid in 262 was found to be the best solvent.     

Extraction-spectrophotometric determination of traces of copper(II), zinc(II), cadmium(II) and mercury(II) with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol

Summary Sensitive extraction-spectrophotometric procedures are described for the complexes of Cu(II), Zn(II), Cd(II) and Hg(II) with 5-Br-PADAP using chloroform as solvent. Optimal conditions have been established for the quantitative extraction of the metal chelates and their composition and optical characteristics have been determined as well. The conditional extraction constants amount logK _ex=10, the molar absorptivities of the complexes being 10⁵ l·mole^–1·cm^–1. Job's method and equilibrium shift method indicate the molar ratios M5-Br-PADAP=12.

---

Spektralphotometrische Bestimmung von Spuren Cu(II), Zn(II), Cd(II) und Hg(II) mit 2-(5-Bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP)

Zusammenfassung Einfache und empfindliche Methoden zur extraktionsspektralphotometrischen Bestimmung von Spuren Cu(II), Zn(II), Cd(II) und Hg(II) mit 5-Br-PADAP wurden beschrieben. Chloroform wurde als Extraktionsmittel verwendet. Die optimalen Bedingungen für die quantitative Extraktion der Metallchelate wurden ermittelt und deren Zusammensetzung bestimmt. Die Stabilitätskonstanten haben hohe Werte (logK _ex=10), die molare Absorption der Komplexe beträgt 10⁵1·mol^–1·cm^–1. Das Molarverhältnis der Komplexe beträgt M5-Br-PADAP=12.