P123(PEO20-PPO70-PEO20)嵌段共聚物水溶液物理凝胶化行为的耗散粒子动力学模拟

采用耗散粒子动力学(Dissipative particle dynamics, DPD)方法研究了P123(PEO20-PPO70-PEO20)嵌段共聚物水溶液常温下的物理凝胶化行为. 在体积分数(2%~10%)较低时, P123在水溶液中形成球形胶束. 当P123的水溶液体积分数升高到20%时, 会形成柱状胶束. 在P123的水溶液体积分数为30%和40%时, 观察到具有三维网络结构的凝胶. 这些模拟结果不仅与实验结果一致, 而且证明了耗散粒子动力学方法是一种非常适合研究物理凝胶化行为的重要方法. 另外, 在P123的水溶液体积分数为40%时, 研究了凝胶随着时间发展的形成过程.     

P123重水溶液的物理凝胶化及凝胶结构

利用 1H NMR方法, 研究了高浓度的P123(PEO20PPO70PEO20)在重水溶液中的溶胶-凝胶转变过程. 升高温度使得体系发生溶胶-凝胶转变, 进一步升高温度, 体系发生凝胶-溶胶转变. 通过对不同质子基团的谱线宽度和化学位移偏移的分析, 同时结合流变学频率扫描和同步辐射(SR)研究, 发现质量分数为30%的P123的重水溶液在凝胶化过程中, 结构经历了由立方相(cubic)-六角柱状相(hcp)-层状相(lamellar)的转变过程, 其中立方相为面心立方(fcc)和六角密堆积球状相(hcps)的混合相. 高温时从凝胶到溶胶的转变主要体现为P123形成富集区与水发生相分离的过程.     

SiO2阶层多孔结构搭建及块体材料制备机理

借助溶胶-凝胶结合相分离和模板法进行了阶层多孔结构的搭建及二氧化硅多孔块体材料的制备,表征了阶层多孔块体的显微结构及孔结构特性,分析了阶层多孔结构的搭建机理。研究结果表明,三嵌段共聚物聚环氧乙烷-聚环氧丙烷-聚环氧乙烷（P123）的加入不仅诱导共混体系发生相分离,调控大孔结构的形成,同时形成球形胶束并作为模板剂进入骨架,而1,3,5-三甲基苯（TMB）的加入使P123形成的胶束膨胀且更加稳定,在骨架上成功引入了球形介孔,骨架中凝胶粒子相互聚集形成微孔,从而搭建贯通大孔-球形介孔-微孔同时分布的阶层多孔结构,并获得相应的多孔块体材料;当正硅酸甲酯（TMOS）：P123：TMB摩尔比为1：0.015：0.353时,多孔块体材料的阶层多孔结构最优,大孔孔径为0.5-1.5 μm,介孔孔径为3-4 nm,显气孔率66.1%,比表面积为616 m²·g^-1。     

PEO-PPO-PEO水溶液体系胶束化及凝胶化行为的耗散粒子动力学模拟

采用耗散粒子动力学(Dissipative particle dynamics, DPD)模拟方法研究了三嵌段共聚物聚氧乙烯-聚氧丙烯-聚氧乙烯(PEO-PPO-PEO)的胶束化和凝胶化行为. 通过模拟得到了F127(EO₉₉PO₆₅EO₉₉)水溶液的临界胶束浓度和临界凝胶浓度. 结果发现, 在298 K、 质量分数低于40%时, F127水溶液中形成的胶束形状均为球形. 此外,进一步研究了亲水嵌段长度对胶束结构及凝胶形成浓度的影响, 结果发现, 亲水嵌段越短, 越有利于长椭球状胶束的形成, 而临界凝胶浓度随着亲水嵌段PEO长度的增加而降低.     

3DOM TiO_2-ZrO_2复合材料制备与多模式光催化降解有机污染物

采用溶胶-凝胶结合煅烧后处理方法,以聚苯乙烯(PS)胶球和EO20PO70EO20(P123)作为双模板剂制备了三维有序大孔复合材料3DOM Ti O2-Zr O2.通过XRD、UV-Vis/DRS、XPS、SEM以及氮气吸附-脱附等测试手段对其组成、结构与表面形貌进行了表征.同时,研究了3DOM Ti O2-Zr O2在多模式光催化条件下对有机污染物的降解情况.结果表明,3DOM Ti O2-Zr O2复合材料呈现的开放通透、整齐有序的"蜂巢状"大孔结构不仅有利于有机污染物分子的输入与输出,而且其良好的晶型结构与较高的BET比表面积进一步增强了其在紫外光、微波辅助以及模拟日光光催化降解甲基橙中的活性.同时,该复合材料对多种类型结构的有机污染物均显示一定程度的降解.     

17R4/F127混合水溶液的凝胶结构

结合流变学频率扫描和同步辐射小角X射线散射(SAXS), 研究了17R4(PO₁₄-EO₂₄-PO₁₄)含量和温度对17R4/F127(EO₉₉-PO₆₅-EO₉₉)混合水溶液凝胶结构的影响. 结果表明, 溶胶、 软凝胶和硬凝胶分别对应无序结构、 无序与立方相共存结构以及立方相结构. 对于F127水溶液体系, 可以将F127形成的胶束看作硬球, 随着温度的升高, 胶束的硬球半径和胶束中F127链的聚集数随之减小, 这是因为17R4在较低温度下很难形成胶束, 当温度升高时, 17R4链参与胶束的形成, 从而使胶束数目增加, 因此每个胶束中的F127链数也随之减小. 当17R4含量较高时, 胶束外壳中F127部分的PEO链段数随着温度升高而减小, 胶束外壳变得更软, 因此, 当17R4/F127摩尔比为2: 1时, 混合溶液在高温下呈现面心立方(fcc)到体心立方(bcc)的结构转变.     

放射孔二氧化硅及其核壳结构的制备与表征

室温下以十六烷基三甲基溴化铵(CTAB)为模板剂, 正硅酸乙酯(TEOS)为硅源, 氨水(质量分数25%)为催化剂, 在水-乙醇-乙醚作共溶剂的体系中以氨基化的实心二氧化硅(NH₂-sSiO₂)为添加剂, 制备了放射孔二氧化硅及其核壳结构(sSiO₂@rSiO₂). 通过扫描电子显微镜(SEM)、透射电子显微镜(TEM)、小角X射线衍射(XRD)、氮气吸附-脱附实验和孔径分布测定对其进行了表征和分析. 结果表明, 合成的产物为0.4~1 μm的球形粒子, 球上存在多级放射状孔道结构, 孔径从3 nm到几十纳米的多级孔径并存, 样品的Brunauer-Emmett-Teller(BET)比表面积为996 m²/g. 最后对放射孔二氧化硅的形成机理及核壳结构的影响因素进行了初步探讨.     

囊泡状二氧化硅的合成及油气吸附性能

以正硅酸四甲酯(TMOS)为硅源,P123(EO20PO70EO20)为表面活性剂,在p H=6的磷酸缓冲体系中制备了囊泡状二氧化硅材料.利用乙醇萃取脱除模板剂P123,电镜观测结果表明所得二氧化硅具有大孔囊泡结构,N2吸附结果表明其具有高比表面积和大孔容.通过Boehm滴定法确定了硅羟基数量与吸水率呈正相关.用囊泡状二氧化硅材料与商业化活性炭(AC)和硅胶(SG)对水蒸气、正己烷和油气进行静态吸附.在自建的动态正己烷吸附装置上用对囊泡状二氧化硅材料和商业化AC和SG对正己烷进行动态吸附.吸附结果表明,囊泡状二氧化硅材料的静/动态吸附容量和稳定性都远高于商业化活性炭和硅胶.     

反相破乳剂SP169及DMEA169在溶液中的聚集行为

以芘(Py)为荧光探针,十六烷基氯化吡啶(CPC)为猝灭剂,采用稳态荧光探针法测定了反相破乳剂SP169和DMEA169的临界胶束浓度(cmc)及胶束聚集数(N_agg),并考察了两者在溶液中形成的胶束内部的微环境极性大小,采用动态光散射法测定了两者胶束的流体力学直径(D_h),并通过耗散粒子动力学(DPD)方法模拟了两者在溶液中聚集形态的动力学变化过程。结果表明,两者的临界胶束聚集数分别为N_m(SP169)=28,N_m(DMEA169)=18;SP169的流体力学直径小于DMEA169,但其增长速度前者大于后者;DPD模拟的结果显示,由于起始剂在胶束内部与其他粒子间相互作用的不同,SP169聚集成棒状胶束,而DMEA169聚集成舒展的球状胶束,这解释了实验结果：相同浓度下前者胶束的流体力学直径及胶束内部的微环境极性皆比后者小,同时由于SP169起始剂的疏水性,使得其具有较大的胶束聚集数。     

高温水热合成具有超低介电常数的规则介孔氧化硅材料

分别以高分子三嵌段共聚物P123(PEO₂₀-PPO₇₀-PEO₂₀)和F127(PEO₁₀₆-PPO₇₀-PEO₁₀₆)为模板剂, 通过高温水热法制备了具有超低介电常数的规则介孔氧化硅材料(OMSs). 当合成温度达到200℃时, 得到的产物仍可保持规则的介孔结构. X射线衍射和氮气吸附结果表明, OMSs系列材料具有规则的二维六方或体心立方介孔结构、 大的比表面积和孔容及均一的孔径分布. ²⁹Si MAS NMR分析表明, OMSs与低温(100℃)合成产物相比具有更高的骨架缩合度, 从而具有优异的水热稳定性. 由于具有大的孔容和高的骨架缩合度, OMSs表现出了超低的介电常数. 以P123为模板剂, 200℃下合成的OMS的介电常数可达1.31. OMSs作为一类稳定的超低介电常数材料, 对于绝缘材料的发展具有潜在的应用价值.     

A calorimetry and light scattering study of the formation and shape transition of mixed micelles of EO20PO68EO20 triblock copolymer (P123) and nonionic surfactant (C12EO6)

The interaction between the nonionic surfactant C12EO6 and the poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer EO20PO68EO20 (P123) has been investigated by means of isothermal titration and differential scanning calorimetry (DSC) as well as static and dynamic light scattering (SLS and DLS). P123 self-assembles in water into spherical micelles at ambient temperatures. At raised temperatures, the DSC data revealed a sphere-to-rod transition of the P123 micelles around 60 degrees C. C12EO6 interacts strongly with P123 micelles in aqueous solution to give mixed micelles with a critical micelle concentration (cmc) well below the cmc for pure C12EO6. The presence of C12EO6 also lowers the critical micelle temperature of P123 so aggregation starts at significantly lower temperatures. A new phenomenon was observed in the P123-C12EO6 system, namely, a well-defined sphere-to-rod transition of the mixed micelles. A visual phase study of mixtures containing 1.00 wt % P123 showed that in a narrow concentration range of C12EO6 both the sphere-to-rod transition and the liquid-liquid phase separation temperature are strongly depressed compared to the pure P123-water system. The hydrodynamic radius of spherical mixed micelles at a C12EO6/P123 molar ratio of 2.2 was estimated from DLS to be 9.1 nm, whereas it is 24.1 nm for the rodlike micelles. Furthermore, the hydrodynamic length of the rods at a molar ratio of 2.2 is in the range of 100 nm. The retarded kinetics of the shape transition was detected in titration calorimetric experiments at 40 degrees C and further studied by using time-resolved DLS and SLS. The rate of growth, which was slow (>2000 s), was found to increase with the total concentration.     

基于棒状介孔SiO_2剪切增稠流体的流变行为

以三嵌段共聚物聚氧乙烯-聚氧丙烯-聚氧乙烯(PEO-PPO-PEO,P123)为模板剂,采用溶胶-凝胶法合成了介孔SiO_2-P123复合物,经煅烧除去P123得到不同长径比的棒状介孔SiO_2粒子,将其分散于聚乙二醇(PEG)中制成剪切增稠流体(STF),利用旋转流变仪对STF的流变性能进行了表征。结果表明:在稳态条件下,STF的剪切增稠效应随介孔SiO_2质量分数的增加而增强,随介孔SiO_2粒子长径比的增加而减弱;在动态条件下,STF的剪切增稠效应随介孔SiO_2质量分数的增加而减弱,随介孔SiO_2粒子长径比的增加而增强。     

Synthesis and Characterization of Ordered Mesoporous Silica Spheres Using Anionic and Nonionic Mixed Surfactants for Their Potential Application in LC

Ordered mesoporous silicas (OMSs) with spherical morphology were synthesized by using mixed surfactants of anionic sodium dodecyl sulfate and nonionic block copolymer EO₂₀PO₇₀EO₂₀ (P123) as template through an acid-catalyzed silica sol?Cgel process. A variety of characterizations demonstrated that the silica products exhibited well-formed spherical morphology, ordered mesostructure, narrow pore size distribution and large surface area (~700 m² g^?1). It was found that the synthesized OMSs had high adsorption capacity by using oxymatrine as model solute. The column packed with the silica spheres exhibited low back pressure and baseline separation of aromatic compounds such as benzene and nitrobenzene could be achieved. These results demonstrated the synthesized OMSs as a potential stationary phase for liquid chromatography.     

Dependence of SBA-15 formation on the block copolymer concentration in the course of synthesis with precursor containing ethylene glycol residues

The formation of silica is governed by two parallel processes triggered by the addition of a precursor to a solution of P123 block copolymer. One process is sol–gel synthesis, while the other is the transformation of an initial micellar phase consisting of spherical micelles of P123 into a hexagonal mesophase, which serves as a template. The gelation of the reaction mixture terminates all transformations, thus making it possible to examine the phase state of the block copolymer at the moment of the sol–gel transition. The systematic study of systems with different P123 concentrations has shown that the structure, morphology, and porosity of the material is determined by the ratio between the rates of the aforementioned processes. A material with the structure of SBA-15 containing hexagonally packed cylindrical mesopores is formed at a block copolymer content of 10 wt %. As the P123 concentration is reduced, the rate of the transformations of its structures decreases relative to the rate of the sol–gel process. Analysis of electron micrographs has revealed that the material being formed contains, initially, irregular short rodlike mesopores rather than cylindrical ones; then, as the P123 concentration is further decreased, amorphous silica arises in the material. The role of their templates is played by intermediate structures formed during the transformation of the P123 micellar phase into the hexagonal mesophase. Advantages of the SBA-15 synthesis with the precurosr containing ethylene glycol residues are the good reproducibility, one-pot procedure, no addition of acid and organic solvent or heating, and the formation of bimodal monolithic material containing both meso- and macropores.     

乙烷桥键介孔材料的制备及其在反相液相色谱中的应用

以1,2-二(三甲氧基硅基)-乙烷为硅源、聚氧乙烯-聚氧丙烯-聚氧乙烯三嵌段共聚物(EO20PO70EO20,P123)为模板剂、十六烷基三甲基溴化铵(CTAB)为共模板剂、乙醇为共溶剂,在酸性条件下合成了一种乙烷桥键有序介孔材料(PME)。研究表明,该PME具有高的比表面积(1152 m2/g)、高度有序的孔结构(二维六方相)、窄的孔径分布及表面光滑的球形形貌。将该PME不经化学改性直接用作反相高效液相色谱固定相,能够有效分离5种多环芳香族化合物(苯、萘、联苯、菲和芘)。     

硫和银共掺杂介孔TiO2的制备表征及光催化活性

以P123为模板,以钛酸四正丁酯、硝酸银和硫脲为原料采用模板法制备了一系列硫和银共掺杂介孔TiO2光催化材料。利用扫描电子显微镜（SEM）、X射线衍射（XRD）、BET和紫外-可见光谱（UV-Vis）等技术对其形貌、晶体结构及表面结构、光吸收特性等进行了表征。以甲基橙溶液的光催化降解为模型反应, 考察了不同掺杂量的样品在紫外和可见光下的光催化性能。结果表明：用模板法制备的共掺杂介孔TiO2光催化材料在紫外和可见光条件下较纯介孔TiO2和单掺杂介孔TiO2对甲基橙溶液具有更好的光催化降解效果, 且硫和银的掺杂量及样品焙烧温度显著影响该材料的催化性能。当硫掺杂量为2%（mol）和银掺杂量为1%（mol）,在500℃焙烧2 h所得光催化材料的催化性能最佳, 4 h即可使甲基橙的降解率达98.8%,重复使用4次仍可使甲基橙的降解率保持在87.5%以上。因此, 以该模板合成法, 通过硫和银的共掺杂有望使TiO2成为一种低或无能耗、高活性的绿色环保型催化材料。     

Effect of drying on the mesoporous structure of sol-gel derived silica with PPO-PEO-PPO template block copolymer

The effects of drying method on the pore structure of mesoporous silica were studied from the viewpoint of enhancing closed porosity in mesoporous silica. The mesoporous silica was prepared via a sol-gel process using polyethyleneoxide-polypropyleneoxide-polyethyleneoxide (PEO-PPO-PEO) triblock copolymer (Pluronic P123) as the structure-directing template. The closed porosity was evaluated from the apparent mass density of the sample measured by a helium pycnometer. These mesoporous silicas were also characterized by transmission electron microscopy (TEM), thermogravimetric analysis (TGA), and nitrogen adsorption. The drying method was shown to be responsible for the finally templated mesoporous structure of the silica. More rapid drying is more preferable for enhancing the closed porosity of the mesoporous silica. The closed pores were formed by immediate immobilization of copolymer molecular assemblies in the silica matrix due to the instant removal of the solvent and solidification at higher temperatures. The drying method, mainly affecting the drying rate, is highly influential on the finally replicated mesoporous structure in silica.     

Synthesis of bifunctionalized mesoporous organosilica spheres for high-performance liquid chromatography

Phenyl-functionalized mesoporous ethane-silicas with spherical morphology were synthesized by one-step co-condensation of phenyltrimethoxysilane (PTMS) and 1,2-bis(trimethoxysily)ethane (BTME) using a triblock copolymer EO(20)PO(70)EO(20) (P123) as template with the aid of a co-surfactant (cetyltrimethylammonium bromide, CTAB) and a co-solvent (ethanol) in acidic medium. Powder X-ray diffraction (XRD), nitrogen sorption measurement and scanning electron microscopy (SEM) show that phenyl-functionalized ethane-silica has wormhole-like mesostructure and perfect spherical morphology. The chemical stability of phenyl-functionalized mesoporous ethane-silica in basic medium is greatly improved owing to the ethane groups bridged in the mesoporous framework. This work also demonstrates that the phenyl-functionalized mesoporous ethane-silica spheres are excellent packing materials for potential application in the reversed-phase high-performance liquid chromatography (HPLC).     

Critical micelle concentrations of cetyltrimethylammonium chloride and their influence on the periodic structure of mesoporous silica

The influence of micelle morphology transformation on the structure of mesoporous materials is fundamental in designing optimal, well-ordered, mesoporous materials. Firstly, the steady-state fluorescence technique was adopted to determine the first and second critical micelle concentrations of cetyltrimethylammonium chloride (CTAC) as 125 and 210 mmol L⁻¹ in an equimolar mixture of water and ethanol at 25°C. Using tetraethylorthosilicate (TEOS) as the precursor, mesoporous silicas (with a surface area of 545.7–1210.5 m 545.7 ∼ 1210.5 m² g⁻¹ and a pore volume of 0.26 ∼ 0.80 cm³ g⁻¹) were synthesized with the CTAC templates in the equimolar mixture of water and ethanol. Characterization by small-angle X-ray diffraction and N 2 adsorption/desorption techniques revealed that the surface area and pore volume of silica increased with the content of CTAC, whereas there existed a transition point at the CTAC/TEOS ratio of 0.15 corresponding to the fade-away of well-ordered mesoporous structure. The negative effect of the much higher content CTAC on the periodic structure of mesoporous silica is attributed to micelle transformation from spheres to cylinders related to the second critical micelle concentration of CTAC. The text was submitted by the authors in English.