A Spectrophotometric Determination of Ascorbic Acid

A new, simple and sensitive method for the spectrophotometric indirect determination of ascorbic acid in fruits, beverages, and pharmaceuticals is described. In this method, the ascorbic acid reduces Cu²⁺ to Cu⁺ and reacts with 2,9‐dimethyl‐1,10‐phenanothroline (neucoproine) to form Cu (neucoproine)⁺ complex, and it was extracted with N‐phenylbenzimidoylthiourea (PBITU) in chloroform. The apparent value of molar absorptivity of the complex in terms of ascorbic acid is (3.52) × 10⁴ L mole^?1 cm^?1 at λ_max, 460. The detection limit of ascorbic acid is 40 μg L^?1 and the method obeys Beer's law over the concentration range of 0.1–4.0 μg mL^?1. The proposed method was successfully applied for the determination of ascorbic acid in various samples. The validity of the present method was checked by the flow injection analysis (FIA) method.     

Flow injection chemiluminescence determination of isoniazid with electrogenerated hypochlorite

A flow-injection chemiluminescence method for the determination of isoniazid based on the sensitizing effect of isoniazid on the chemiluminescence generating luminol-hypochlorite reaction is described. The hypochlorite was electrogenerated on-line by constant current electrolysis, thus, eliminating instability of hypochlorite solution prepared from commercially available sodium hypochlorite. The calibration graph is linear in the range 1 × 10^–8 to 1 × 10^–6 g mL^–1, and the detection limit is 6 × 10^–9 g mL^–1. The relative standard deviation for determination of 5 × 10^–8 g mL^–1 is 2.8%. The proposed method has been successfully applied to the determination of isoniazid in pharmaceutical preparations.     

Voltammetric Method for the Simultaneous Determination of Melatonin and Pyridoxine in Dietary Supplements Using a Cathodically Pretreated Boron‐doped Diamond Electrode

The simultaneous voltammetric determination of melatonin (MT) and pyridoxine (PY) has been carried out at a cathodically pretreated boron‐doped diamond electrode. By using cyclic voltammetry, a separation of the oxidation peak potentials of both compounds present in mixture was about 0.47 V in Britton‐Robinson buffer, pH 2. The results obtained by square‐wave voltammetry allowed a method to be developed for determination of MT and PY simultaneously in the ranges 1–100 μg mL⁻¹ (4.3×10⁻⁶–4.3×10⁻⁴ mol L⁻¹) and 10–175 μg mL⁻¹ (4.9×10⁻⁵–8.5×10⁻⁴ mol L⁻¹), with detection limits of 0.14 μg mL⁻¹ (6.0×10⁻⁷ mol L⁻¹) and 1.35 μg mL⁻¹ (6.6×10⁻⁶ mol L⁻¹), respectively. The proposed method was successfully to the dietary supplements samples containing these compounds for health‐caring purposes.     

Surface‐Imprinting Sensor Based on Carbon Nanotubes/Graphene Composite for Determination of Bovine Serum Albumin

A novel molecularly imprinted sensor was firstly prepared based on a carbon nanotubes/graphene composite modified carbon electrode (MIPs/CNT/GP/CE) for the selective determination of bovine serum albumin. The molecularly imprinted sensor was tested by differential pulse voltammetry (DPV) to investigate the relationship between the response current and bovine serum albumin concentration. The results showed that a wide linear range (1.0×10^?4 to 1.0×10^?10 g mL^?1) for the detection of bovine serum albumin with a low detection limit of 6.2×10^?11 g mL^?1 for S/N=3 was obtained. The novel imprinted sensor exhibited high selectivity, sensitivity, and reproducibility, which provided an applicable way for sensor development.     

PVC matrix membrane sensor for potentiometric determination of dodecylsulfate

The construction and performance characteristics of a new potentiometric PVC membrane sensor for the determination of sodium dodecyl sulfate (SDS) are described. The sensor was based on the use of an N-cetyl-N,N,N trimethyl ammonium (CTA) dodecyl sulfate (DS) ion pair as ion exchange sites in PVC matrix in the presence of o-nitrophenyl octylether as plasticiser. The sensor exhibited a fast, stable, and near-Nernstian response for SDS over the concentration range of 1 × 10^?3 to 10^?6 M at 25°C and the pH range 4–8.5 with anionic slope of 52.5 ± 0.5 mV decade^?1. The lower detection limit was 3 × 10^?6 M, and the response time was 25 s. Selectivity coefficients of SDS with respect to a number of different species were investigated. There were negligible interferences caused by most of the investigated anions. The determination of 1.0–280.0 µg mL^?1 of SDS in aqueous solutions showed an average recovery of 99.1%, and the mean relative standard deviation was 1.4 at 100 µg mL^?1. The results obtained in the determination of SDS in liquid soap, water and in some pharmaceutical preparations compared favourably with those obtained by the Methylene Blue active substance method (MBAS). In the present investigation, the DS sensor has been used as an end-point indicator electrode for some precipitation titration reactions, e.g. titration of SDS with CTMABr and cetylpyridinium chloride with SDS.     

Determination of Gallic Acid by Flow Injection Analysis Based on Luminol‐AgNO3‐Ag NPs Chemiluminescence System

A novel flow injection procedure has been developed for the determination of gallic acid based on the enhancement function for luminol‐AgNO₃‐Ag NPs chemiluminescence (CL) system by gallic acid. The enhancement mechanism was proposed for the reinforcing effect of the gallic acid on the CL system. The UV‐vis absorption spectrum and CL emission spectrum were applied to confirm the mechanism. The method is simple, rapid and sensitive with a detection limit of 5×10^?10 g·mL^?1 and a linear range of 8.0×10^?10–1.0×10^?7 g·mL^?1. The relative standard deviation (RSD) is 1.3% for eleven measurements of 5×10^?8 g·mL^?1 gallic acid. The method has been successfully applied to the determination of gallic acid in Chinese proprietary medicine–Jianmin Yanhou tablets and synthesized samples.     

A New Validated Potentiometric Method for Batch and Continuous Quality Control Monitoring of Oseltamivir Phosphate (Taminil) in Drug Formulations and Biological Fluids

A new validated potentiometric method is described for batch and continuous quality control monitoring of the drug oseltamivir phosphate (Taminil) (OST). The method involves the development of a potentiometric sensor responsive to the drug based on the use of the ion‐association complex of (OST⁺) cation with phosphomolybdate anion (PMA^?) as an electroactive material in a poly(vinyl chloride) matrix membrane plasticized with o‐nitrophenyloctyl ether (o‐NPOE). Optimization of the performance characteristics of the sensor is described. A membrane incorporating the OST‐PMA‐NPOE complex in a tubular flow through detector is used in a two channel flow injection set up for continuous monitoring of the drug at a frequency of ～30 samples h^?1. The sensor shows fast near‐Nernstian response for OST over the concentration range 5.2×10^?5–0.8×10^?2 M (21.34 µg mL^?1–3.23 mg mL^?1) with a detection limit of 9.1×10^?6 M (3.73 µg mL^?1) over the pH range 4.6–6.1. The sensor displays good selectivity for OST drug over some basic drugs, inorganic cations, excipients and diluents commonly used in the drug formulations. Validation of the assay method is tested by measuring the lower detection limit, range, linearity, bias, trueness, accuracy, precision, and between‐day‐variability, within day reproducibility, selectivity and ruggedness (robustness). The results reveal good potentiometric performance of the proposed sensor for determination of OST in pharmaceutical capsules and in biological fluid matrices as well as for testing the dissolution profile of the drug and drug homogeneity.     

Determination of Chlorpromazine Hydrochloride with a Layered Double Hydroxide Modified Glassy Carbon Electrode as a Nanocatalyst

We report a simple and sensitive voltammetric sensor for the determination of chlorpromazine (CPZ) based on Ni?Al layered double hydroxide (NiAlLDH) modified glassy carbon electrode (GCE). NiAlLDH was simply electrodeposited on GCE surface in a very short time. The response linear range was 1×10^?3–1×10^?9 mol L^?1, with a detection limit of 1×10^?9 mol L^?1. The NiAlLDH film showed well defined and well separate peaks for dopamine, ascorbic acid, uric acid and CPZ in the same solution. The proposed electrode was used to measure the active pharmaceutical ingredient of CPZ tablet as a real sample.     

Direct potentiometric titration of thiosulfate,thiourea, and ascorbic acid with lodate using an iodide ion-selective electrode

A potentiometric method has been developed for the semi-automatic direct titration of thiourea, thiosulfate, and ascorbic acid with potassium iodate in strongly acidic solutions using an iodide ion-selective electrode to monitor the reaction and locate the endpoint. The method is simple, fast, precise, and accurate. Amounts ranging from 0.15–1.5 mg of thiourea (3.9 × 10^?4–3.9 × 10^?3, M), 0.3–3.0 mg of thiosulfate (5.4 × 10^?4–5.4 × 10^?3, M), and 0.5–5.0 mg of ascorbic acid (5.7 × 10^?4–5.7 × 10^?3, M) have been determined with an average error of about 1%. The method has been applied to the determination of ascorbic acid in tablets. Results checked closely with those obtained with a standard titrimetric method.     

Molecular Imprinting-Chemiluminescence Sensor for the Determination of Amoxicillin

The amoxicillin-imprinted polymer was synthesized with methacrylic acid (MAA) as a functional monomer and ethylene glycol dimethacrylate (EGDMA) as a cross-linker. The binding characteristic of the imprinted polymer to amoxicillin was evaluated by equilibrium binding experiments. Using the imprinted polymer as recognition material, 3-(3′-nitrophenyl)-5(2′-sulfonylphenylazo)-rhodanine (4NRASP) was synthesized by the authors and was used as chemiluminescence (CL) reagent. A novel chemiluminescence (CL) sensor for the determination of amoxicillin was developed based on the CL reaction of amoxicillin with potassium permanganate in an acidic medium. The sensor displayed excellent selectivity and high sensitivity. The linear response range of the sensor was from 5.0 × 10^?9 to 1.0 × 10^?6 g · mL^?1 (r = 0.9985) and the detection limit was 1.3 × 10^?9 g · mL^?1. The relative standard deviation for the determination of 1.0 × 10^?7 g · mL^?1 amoxicillin solution was 1.7% (n = 11). The sensor was applied to the determination of amoxicillin in urine samples with satisfactory results.     

A New Flow‐Injection Chemiluminescence Method for the Determination of Acyclovir and Gancyclovir

Abstract

A rapid and sensitive flow‐injection chemiluminescence (FI‐CL) method, which is based on the CL intensity that generated from the redox reaction of Ce(IV)‐rhodamine B in H₂SO₄ medium, for the determination of acyclovir and gancyclovir is described. For acyclovir, the determination range is 3×10^?8 g mL^?1–7×10^?5 g mL^?1, with 1.56×10^?8 g mL^?1 as its determination limit. During 11 repeated measurements for 1×10^?6 g mL^?1 acyclovir, the relative standard deviation was 2.08%. For gancyclovir, the determination range was 5×10^?8 g mL^?1–7×10^?5 g mL^?1, with 2.35×10^?8 g mL^?1 as its determination limit. The relative standard deviation is 2.83% with 11 repeated measurements of 1×10^?6 g mL^?1 gancyclovir. This method can be successfully used to determine the content of acyclovir and gancyclovir in injections, acyclovir in eye drops, and, maybe, also for other ciclovirs.     

Determination of L-Ascorbic Acid by Adsorption Potentiometry with Carbon Paste Electrode

Abstract

This paper reports the potentiometric measurement of ascorbic acid in the solution of 0.10 mol/L NaOH-0.1 mol/L NaCl using carbon paste (the mixture of spectroscopic graphite powder and di-iso-octyl phthalate) electrode(room temperature 15°C), with the linear range 7.0 × 10^?7 × 4.0 × 10^?5mol/L, average response slope 95mV/decade and detection limit 1 × 10^?7mol/L. Phenol, sulfite, Mn²⁺ and so on pose no interference to the measurement of ascorbic acid. This method is characterized by fine selectivity, reproducibility and accuracy. The potential response behavior is caused chiefly by chemisorption of ascorbic acid to the surface of the carbon.

Each year yields a number of papers concerning the determination of ascorbic acid by various methods, including gas chromatographymass spectrometry¹, capillary electrophoresis², spectrophotometry³, voltammetry⁴, titrimetric method⁵, biosensor⁶ and so on, Each method has its merits and defects in analyzing different samples. M. Petersson⁷ worked out the potentiometric sensor for determining ascorbic acid by modifying monolayer of ferrocene upon the surface of half-oxidized platinum electrode with an average response slope 50±8.8mV/decade, but this sensor suffers from inadequate selectivity. In our study, carbon paste electrode (without ionophore) is applied in the determination of ascorbic acid by potentiometry with an average response slope 95mV/decade. This method displays fine selectivity, accuracy, convenience and rapidity of determination.     

Flow-injection spectrophotometric determination of ascorbic acid by reduction of vanadotungstophosphoric acid

Ascorbic acid may be determined spectrophotometrically at 360 nm based on reduction of vanadotungstophosphoric acid using flow-injection analysis. The carrier stream was distilled water and the reagent streams were buffer solution (pH 3.0), 1.735 × 10^?3 M dodecatungstophosphoric acid and 1.735 × 10^?3 M sodium vanadate. The injection rate was 80 h^?1. The calibration graph was linear up to 80 μg ml^?1 ascorbic acid and the relative standard deviation for the determination of 20 μg ml^?1 ascorbic acid was 1.5% (n=10). The detection limit was 1.0 μg ml^?1 ascorbic acid, based on an injection volume of 250 μl. The system was applied to the determination of ascorbic acid in vitamin C tablets.     

Meldola's Blue Immobilized on a SiO2/SnO2/Phosphate Xerogel,a New Sensor for Determination of Ascorbic Acid in Medicine and Commercial Fruit Juice

A modified carbon paste electrode with SiO₂/SnO₂/Phosphate/Meldola's blue, SSPMelB, was used to study the electrocatalytic oxidation of ascorbic acid by cyclic voltammetry and chronoamperometry. The adsorbed dye mediates ascorbic acid oxidation at an anodic potential of 0.04 V vs. saturated calomel electrode (SCE) at pH 7.0, in 0.5 mol L^?1 solution. The linear range of the sensor is between 4.0×10^?7 and 2.0×10^?3 mol L^?1, with a limit of detection of 4.0×10^?7 mol L^?1. This novel electrode shows good analytical performance for determination of ascorbic acid in medicine and commercial fruit juice.     

Flow Injection Analysis Determination of Ascorbic Acid with Spectrofluorimetric Detection

Abstract

A flow injection system for the fluorescence determination of low level of ascorbic acid is proposed. The method is based on the rapid oxidation of ascorbic acid by thallium(I). The fluorescence signal at 419 nm is proportional to the amount of ascorbic acid in the range of (1.4–28.0) × 10^?7 mole. The relative standard deviations for ten replicate measurements of 1.4 × 10^?6 mole of ascorbic acid was 1.3%. The sample rate of 45 ± 5 sample per hour was achieved. The usefulness of the method was tested in the determination of ascorbic acid in fruit juices and vitamin C tablets.     

Electrochemical Sensor based on Indium Tin Oxide Glass Modified with Poly(Ethyleneimine)/Phosphomolybdic Acid Composite Multilayers

In this work, one novel electrochemical sensor was prepared by alternative deposition of phosphomolybdic acid (PMoA) and poly(ethyleneimine) (PEI) on an indium tin oxide glass substrate through layer‐by‐layer assembly. The performance of as‐prepared electrode was evaluated with both of oxidizing compounds of iodate and H₂O₂ and reducing compounds of dopamine and ascorbic acid as models. The results showed that corresponding current response of redox peak increased linearly with the concentration of above compounds increasing in certain ranges, respectively. Limits of detection to them were in the range of 1.0×10⁻⁴ ‐ 4.3×10⁻⁴ mg mL⁻¹ with cyclic voltammetry (CV) in 0.1 mol L⁻¹ NaAc‐HAc buffer (pH 5.0). The electrode showed high stability and remained 95 % of its initial activity even after 100 cycles of CV scan. When applied in real samples of table salts, juice and human serum, high recoveries of 96.84 to 100.33 % were achieved with relative standard deviations of 1.11‐3.96 % (n=3) at three spiked levels. Moreover, it was also successfully applied for the simultaneous determination of dopamine and ascorbic acid in human serum with differential pulse voltammetry. The results indicated that PMoA/PEI multilayer modified electrode can be used as a universal electrochemical sensor for sensitive detection of redox compounds.     

Development and Validation of an LC Method for Simultaneous Determination of Ascorbic Acid and Three Phenolic Acids in Sustained Release Tablets at Single Wavelength

A simple, rapid and sensitive column liquid chromatographic method was developed and validated to measure simultaneously the amount of ascorbic acid and phenolic acids at single wavelength (240 nm) in order to assess drug release profiles and drug-excipients compatibility studies for a new sustained release tablet formulation and its subsequent stability studies. A combined isocratic and linear gradient reversed-phase LC method was carried out at 240 nm. Quantification was achieved with reference to the external standards. The linearity for concentrations between 0.042 and 0.150 mg mL^?1 for ascorbic acid, 0.084–0.250 mg mL^?1 for chlorogenic acid, 0.053–0.360 mg mL^?1 for caffeic acid, and 0.016–0.250 mg mL^?1 for ferulic acid (r > 0.99 for all analytes) were established. The recovery of the active ingredients from the samples was at the range of 92.3–102.9%. Intra- and inter-day precisions were less than 2.5%. The limits of detection and quantification were 8 and 24 μg mL^?1 for ascorbic acid, 18 and 54 μg mL^?1 for chlorogenic acid, 37 and 112 μg mL^?1 for caffeic acid, and 11 and 34 μg mL^?1 for ferulic acid. The determination of the four active ingredients was not interfered by the excipients of the products. Samples were stable in the release mediums (37 °C) at least for 12 h.     

Electrocatalytic Determination of Ascorbic Acid at the Surface of 2,7‐Bis(ferrocenyl ethyl)fluoren‐9‐one Modified Carbon Paste Electrode

A chemically modified carbon paste electrode with 2,7‐bis(ferrocenyl ethyl)fluoren‐9‐one (2,7‐BFEFMCPE) was employed to study the electrocatalytic oxidation of ascorbic acid in aqueous solution using cyclic voltammetry, differential pulse voltammetry and chronoamperometry. The diffusion coefficient (D=1.89×10^?5 cm² s^?1), and the kinetic parameter such as the electron transfer coefficient, α (=0.42) of ascorbic acid oxidation at the surface of 2,7‐BFEFMCPE was determined using electrochemical approaches. It has been found that under an optimum condition (pH 7.00), the oxidation of ascorbic acid at the surface of such an electrode occurs at a potential about 300 mV less positive than that of an unmodified carbon paste electrode. The catalytic oxidation peak currents show a linear dependence on the ascorbic acid concentration and linear analytical curves were obtained in the ranges of 8.0×10^?5 M–2.0×10^?3 M and 3.1×10^?5 M–3.3×10^?3 M of ascorbic acid with correlation coefficients of 0.9980 and 0.9976 in cyclic voltammetry and differential pulse voltammetry, respectively. The detection limits (2δ) were determined to be 2.9×10^?5 M and 9.0×10^?6 M with cyclic voltammetry and differential pulse voltammetry, respectively. This method was also examined for determination of ascorbic acid in pharmaceutical preparations.     

Molecularly-Imprinted Materials for Potentiometric Transduction: Application to the Antibiotic Enrofloxacin

Enrofloxacin (ENR) is an antimicrobial used both in humans and in food producing species. Its control is required in farmed species and their surroundings in order to reduce the prevalence of antibiotic resistant bacteria. Thus, a new biomimetic sensor enrofloxacin is presented. An artificial host was imprinted in specific polymers. These were dispersed in 2-nitrophenyloctyl ether and entrapped in a poly(vinyl chloride) matrix. The potentiometric sensors exhibited a near-Nernstian response. Slopes expressing mV/Δlog([ENR]/M) varied within 48–63. The detection limits ranged from 0.28 to 1.01 µg mL^?1. Sensors were independent from the pH of test solutions within 4–7. Good selectivity was observed toward potassium, calcium, barium, magnesium, glycine, ascorbic acid, creatinine, norfloxacin, ciprofloxacin, and tetracycline. In flowing media, the biomimetic sensors presented good reproducibility (RSD of ± 0.7%), fast response, good sensitivity (47 mV/Δlog([ENR]/M), wide linear range (1.0 × 10^?5–1.0 × 10^?3 M), low detection limit (0.9 µg mL^?1), and a stable baseline for a 5 × 10^?2 M acetate buffer (pH 4.7) carrier. The sensors were used to analyze fish samples. The method offered the advantages of simplicity, accuracy, and automation feasibility. The sensing membrane may contribute to the development of small devices allowing in vivo measurements of enrofloxacin or parent-drugs.     

Flow injection spectrophotometric determination of ascorbic acid in soft drinks and beer

Two spectrophotometric methods, a photochemical and a non-photochemical, for the determination of ascorbic acid in soft drinks and beer using a flow-injection system are proposed. The non-photochemical method is based on the redox reaction that takes place between ascorbic acid and Fe(III), yielding dehydroascorbic acid and Fe(II). Fe(II) reacts with 1,10-phenantroline, originating the reddish orange Fe(phen)₃ ²⁺ complex (ferroin). This complex is spectrophotometrically monitored at 512 nm, and the signal is directly related to the concentration of ascorbic acid in the sample. The photochemical method has the same basis, nevertheless, uses the irradiation with visible light to enhance the redox reaction and so achieve higher sensitivities in the analysis. The non-photochemical method shows a linear range between 5 and 80 μg mL^?1, with a relative standard deviation of 1.6% (n = 11), a detection limit of 2.7 μg mL^?1 and a sample throughput of ¶60 samples h^?1. The photochemical method shows a linear range between 1 and 80 μg mL^?1, with a relative standard deviation of 1.0% (n = 11), a detection limit of 0.5 μg mL^?1 and a sample throughput of 40 samples h^?1.