Synthesis, crystal structure and properties of the semiconducting salts (TTF)2[Ni(dtcr)2] and (ET)2[Ni(dtcr)2] based on [Ni(dtcr)2] dianions (dtcr = dithiocroconate)

The first examples of CT salts based on [Ni(dtcr)2] dianions (1) (dtcr = dithiocroconate = 4,5-disulfanylcyclopent-4-ene-1,2,3-trionate), (TTF)2[Ni(dtcr)2] (TTF = tetrathiafulvalene) (2) and (ET)2[Ni(dtcr)2] [ET = bis(ethylenedithio)tetrathiafulvalene] (3) are reported. The redox-active dianion 1, containing oxo-groups in the periphery of the molecule, has been selected to investigate the role of the oxo-groups in promoting intermolecular interactions and hopefully their conducting properties. The salts 2 and 3 have been prepared by electrocrystallisation methods and 3 shows a semi-metallic behaviour: sigma = 1 x 10(-3) omega(-1) cm(-1) at room temperature, with a low activation energy 60 meV, while crystals of 2 were unsuitable for conductivity measurements. The X-ray structural characterisation shows an alternate dianion-(cation)2 stacking and the capability of the oxo-groups to promote interstack contacts. In 2, the TTF donors are present as face-to-face dimers of monocations (D2)2+. The stacking arrangement is different in 3, where ET monocations stack along two directions ([110] and [110]) in the same manner, with the repeating sequence (ET)-(ET)-[Ni(dtcr)2]-(ET)-(ET) and are almost parallel to each other, with interplanar distances of 3.575 angstroms. Both structures are built on a dianion and two donor molecules, each one with a charge of +1. Diffuse reflectance combined with vibrational spectra complement structural results well. Crystal data: both 2 and 3 crystallise in the monoclinic space group P2(1)/c with a = 8.6340(8) angstroms, b = 21.586(2) angstroms, c = 7.5960(8) angstroms, beta = 95.625(11) degrees and V = 1408.9(2) angstroms3 for 2 and with a = 9.3700(7), b = 7.4410(6), c = 28.278(2) angstroms, beta = 99.039(6) degrees, V = 1947.1(3) angstroms3 for 3.     

Solid-state coordination chemistry of the Cu/triazolate/X system (X = F-, Cl-, Br-, I-, OH-, and SO4(2-))

Hydrothermal reactions of 1,2,4-triazole with the appropriate copper salt have provided eight structurally unique members of the Cu/triazolate/X system, with X = F-, Cl-, Br-, I-, OH-, and SO4(2-). The anionic components X of [Cu3(trz)4(H2O)3]F2 (1) and [Cu6(trz)4Br]Cu4Br4(OH) (4) do not participate in the framework connectivity, acting as isolated charge-compensating counterions. In contrast, the anionic subunits X of [Cu(II)Cu(I)(trz)Cl2] (2), [Cu6(trz)4Br2] (3), [Cu(II)Cu(I)(trz)Br2] (5), [Cu3(trz)I2] (6), [Cu6(II)Cu2(I)(trz)6(SO4)3(OH)2(H2O)] (8), and [Cu4(trz)3]OH.7.5H2O (9.7.5H2O) are intimately involved in the three-dimensional connectivities. The structure of [Cu(II)Cu(I)(trz)2][Cu3(I)I4] (7) is constructed from two independent substructures: a three-dimensional cationic {Cu2(trz)2}n(n+) component and {Cu3I4}n(n-) chains. Curiously, four of the structures are mixed-valence Cu(I)/Cu(II) materials: 2, 5, 7, and 8. The only Cu(II) species is 1, while 3, 4, 6, and 9.7.5H2O exhibit exclusively Cu(I) sites. The magnetic properties of the Cu(II) species 1 and of the mixed-valence materials 5, 7, 8, and the previously reported [Cu3(trz)3OH][Cu2Br4] have been studied. The temperature-dependent magnetic susceptibility of 1 conforms to a simple isotropic model above 13 K, while below this temperature, there is weak ferromagnetic ordering due to spin canting of the antiferromagnetically coupled trimer units. Compounds 5 and 7 exhibit magnetic properties consistent with a one-dimensional chain model. The magnetic data for 8 were fit over the temperature range 2-300 K using the molecular field approximation with J = 204 cm(-1), g = 2.25, and zJ' = -38 cm(-1). The magnetic properties of [Cu3(trz)3OH][Cu2Br4] are similar to those of 8, as anticipated from the presence of similar triangular {Cu3(trz)3(mu3-OH)}(2+) building blocks. The Cu(I) species 3, 4, 6, and 9 as well as the previously reported [Cu(5)(trz)3Cl2] exhibit luminescence thermochromism. The spectra are characterized by broad emissions, long lifetimes, and significant Stokes' shifts, characteristic of phosphorescence.     

Two enantiomers of [Cu(3)(mnt)(3)](3-) as ligands to Cu(i) or Ag(i) in building [Cu(6)M(2)(mnt)(6)](4-) complexes (M = Cu or Ag) with the reversal of the reaction by X(-) (X = Cl, Br)

Two enantiomers of [Bu(4)N](3)[Cu(3)(mnt)(3)] () formed by Na(2)(mnt) (mnt = maleonitriledithiolate, [S(2)C(2)(CN)(2)](2-)) and CuCl in a 1 : 1 molar ratio react further with MCl (M = Cu or Ag) involving both the enantiomers of to produce the larger complex, [Bu(4)N](4)[Cu(6)M(2)(mnt)(6)] (M = Cu (2), Ag (3)) from which the capped Cu(+) or Ag(+) ion can readily be removed by Bu(4)NX (X = Cl, Br), reverting or back to . Such reversal does not work with non-coordinating anions like BF(4)(-), ClO(4)(-) and PF(6)(-).     

New charge transfer salts based on bis(ethylenedithio)tetrathiafulvalene (ET) and ferro- or antiferromagnetic oxalato-bridged dinuclear anions: syntheses, structures and magnetism of ET5[MM'(C2O4)(NCS)8] with MM' = Cr(III)Fe(III), Cr(III)Cr(III)

Electrochemical combination of the magnetic dinuclear anion [MM'(C2O4)(NCS)8](4-) (MM' = Cr(III)Cr(III), Cr(III)Fe(III)) with the ET organic pi-donor (ET = BEDT-TTF = bis(ethylenedithio)tetrathiafulvalene) gives rise to two new isostructural molecular hybrid salts ET5[MM'(C2O4)(NCS)8], with MM' = CrCr (1), CrFe (2). The molecular structure of compound 1 has been determined by single crystal X-ray diffraction. The particular arrangement of the organic units consists of an unprecedented two-dimensional organic sublattice nearly similar to that observed in kappa-phase structures. For both compounds, the magnetic susceptibility measurements indicate (i) the ET radicals do not contribute to the magnetic moment probably due to the presence of strong antiferromagnetic interaction between them, and (ii) in the anion, the magnetic coupling is antiferromagnetic for 1 (J = -3.65 cm(-1)) and ferromagnetic for 2 (J = 1.14 cm(-1), J being the parameter of the exchange Hamiltonian H = -2JS1S2). The field dependence of the magnetization of compound 2 at 2.0 K gives further evidence of the S = 4 ground-state arising from the interaction between S = 3/2 Cr(III) and S = 5/2 Fe(III). EPR measurements confirm the nature of the magnetic interactions and the absence of any contribution from the organic part, as observed from the static magnetic measurement. Conductivity measurements and electronic band structure calculations show that both salts are semiconductors with low activation energies.     

X-ray crystal structures, electron paramagnetic resonance, and magnetic studies on strongly antiferromagnetically coupled mixed mu-hydroxide-mu-N(1),N(2)-triazole-bridged one dimensional linear chain copper(II) complexes

Four new metal-organic polymeric complexes, {[Cu(mu-OH)(mu-ClPhtrz)][(H 2O)(BF 4)]} n ( 1), {[Cu(mu-OH)(mu-BrPhtrz)][(H 2O)(BF 4)]} n ( 2), {[Cu(mu-OH)(mu-ClPhtrz)(H 2O)](NO 3)} n ( 3), and {[Cu(mu-OH)(mu-BrPhtrz)(H 2O)](NO 3)} n ( 4) (ClPhtrz = N-[( E)-(4-chlorophenyl)methylidene]-4 H-1,2,4-triazol-4-amine; BrPhtrz = N-[( E)-(4-bromophenyl)methylidene]-4 H-1,2,4-triazol-4-amine), were synthesized in a reaction of substituted 1,2,4-triazole and various copper(II) salts in water/acetonitrile solutions. The structures of 1- 4 were characterized by single-crystal X-ray diffraction analysis. The Cu(II) ions are linked both by single N (1), N (2)-1,2,4-triazole and hydroxide bridges yielding one dimensional (1D) linear chain polymers. The tetragonally distorted octahedral geometry of copper atoms is completed alternately by two water and two BF 4 (-) anion molecules in 1 and 2 but solely by two water molecules in 3 and 4. Magnetic properties of all complexes were studied by variable temperature magnetic susceptibility measurements. The Cu(II) ions are strongly antiferromagnetically coupled with J = -419(1) cm (-1) ( 1), -412(2) cm (-1) ( 2), -391(3) cm (-1) ( 3), and -608(2) cm (-1) ( 4) (based on the Hamiltonian H = - J[ summation operator S i . S i+ 1]). The nature and the magnitude of the antiferromagnetic exchange were discussed on the basis of complementarity/countercomplementarity of the two competing bridges.     

A chiral molecular conductor: synthesis, structure, and physical properties of [ET]3[Sb2(L-tart)2].CH3CN (ET = bis(ethylendithio)tetrathiafulvalene; L-tart = (2R,3R)-(+)-tartrate)

The salt [ET](3)[Sb(2)(L-tart)(2)].CH(3)CN (1) has been obtained by electrocrystallization of the organic donor bis(ethylendithio)tetrathiafulvalene (ET or BEDT-TTF) in the presence of the chiral anionic complex [Sb(2)(L-tart)(2)](2-) (L-tart = (2R,3R)-(+)-tartrate). This salt crystallizes in the chiral space group P2(1)2(1)2(1) (a = 11.145(2) angstroms, b = 12.848(2) angstroms, c = 40.159(14) angstroms, V = 5750.4(14) angstroms(3), Z = 4) and is formed by alternating layers of the anions and of the organic radicals in a noncentrosymmetric alpha-type packing. This compound shows a room temperature electrical conductivity of approximately 1 S.cm(-1) and semiconducting behavior with an activation energy of approximately 85 meV. Analysis of the magnetic susceptibility and band structure, however, suggests that this compound should be a narrow band gap semiconductor.     

Triangular,ferromagnetically-coupled CuII 3-pyrazolato complexes as possible models of particulate methane monooxygenase (pMMO)

Magnetic susceptibility and EPR studies show that trinuclear Cu(II)-pyrazolato complexes with a Cu(3)(mu3-X)2 core (X = Cl, Br) are ferromagnetically coupled: J(Cu-Cu) = +28.6 cm(-1) (X = Cl), +3.1 cm(-1) (X = Br). The orderly transition from an antiferromagnetic to a ferromagnetic exchange among the Cu centers of Cu(3)(mu3-X) complexes, X = O, OH, Cl, Br, follows the change of the Cu-X-Cu angle from 120 degrees to approximately 80 degrees. The crystal structures of [Bu4N]2"[Cu3(mu3-Br)2(mu-pz*)3Br3] (pz* = pz (1a) or 4-O2N-pz (1b), pz = pyrazolato anion, C(3)H(3)N(2)(1-)) are presented.     

Synthesis, characterization, and DFT studies of thione and selone Cu(I) complexes with variable coordination geometries

Coordination of Cu(I) halides with N,N'-dimethylimidazole selone (dmise) and thione (dmit) ligands was examined by treating CuX (X = Cl, Br, I) with one or two equivalents of dmise or dmit. The reaction of CuI and CuBr with one molar equivalent of dmise results in unusual selenium-bridged tetrameric Cu(4)(μ-dmise)(4)(μ-X)(2)X(2) copper complexes with average Cu-Se bond lengths of 2.42 ? and a Cu(2)(μ-X)(2) core (X = I (1) or Br (6)) that's in a rhomboidal structure. The reaction of CuX (X = Cl, Br, and I) with two equivalents of dmit or dmise results in trigonal planar Cu(I) complexes of two different conformations with the formula Cu(dmit)(2)X (3a, 3b, 4, and 7) or Cu(dmise)(2)X (2, 5, and 8) with average Cu-S and Cu-Se bond lengths of 2.23 ? and 2.34 ?, respectively. The coordination geometry around the copper center in complexes 1 to 8 is determined by the type of halide and chalcogenone ligand used, intramolecular π-π interactions, and short contact interactions between X-H (X = I, Br, Cl, Se or S). The theoretical DFT calculations are in good agreement with experimental X-ray structural data and indicate that dmise ligands are required for formation of the tetrameric complexes 1 and 6. Electrochemical studies show that the trigonal copper selone complexes have more negative potentials relative to analogous copper thione complexes by an average of 108 mV.     

Mono-, di- and trinuclear 2,3,5,6-tetrakis(2-pyridyl)pyrazine (tppz)-containing copper(II) complexes: syntheses, crystal structures and magnetic properties

Three new copper(ii) complexes of formula [Cu(tppz)(NCO)(2)].0.4H(2)O (1), [Cu(2)(tppz)Br(4)](2) and [Cu(3)(tppz)(C(5)O(5))(3)(H(2)O)(3)].7H(2)O (3)[tppz = 2,3,5,6-tetrakis(2-pyridyl)pyrazine; C(5)O(5)(2-) = croconate, dianion of 4,5-dihydroxycyclopent-4-ene-1,2,3-trione] have been synthesised and structurally characterized by X-ray diffraction methods. The structure of complex is made up of neutral [Cu(tppz)(NCO)(2)] mononuclear units and uncoordinated water molecules. The mononuclear units are grouped by pairs to give a rather short copper-copper distance of 3.9244(4) angstroms. The structure of complex 1 consists of neutral tppz-bridged [Cu(2)(tppz)Br(4)] dinuclear units, the copper-copper separation across tppz being 6.6198(1) angstroms. The dinuclear units are further connected through weak, double out-of-plane Cu-Br...Cu bridges [Br(1)...Cu(1a) 4.0028(17) angstroms] creating tetranuclear entities, the copper-copper separation through this interaction being 4.3299(21) angstroms. The structure of complex 3 is built of neutral [Cu(3)(tppz)(C(5)O(5))(3)(H(2)O)(3)] trinuclear units and uncoordinated water molecules. Tppz and one of the croconate groups act as bridging ligands, the former exhibiting the bis-terdentate coordination mode and the latter adopting an unusual asymmetrical bis-bidentate bridging mode through three adjacent oxygen atoms. The other two croconate groups exhibit the bidentate coordination mode. The intramolecular copper-copper separations are 6.5417(9)(across tppz) and 4.3234(9) angstroms (through bis-bidentate croconato). The magnetic properties of 2 and 3 have been investigated in the temperature range 1.9-300 K. The magnetic behaviour of complex 2 is that of an antiferromagnetically coupled copper(II) dimer (J = -40.9 cm(-1), the Hamiltonian being H = -JS(A).S(B)). In the case of compound , the chi(M) T vs. T plot is typical of an overall antiferromagnetic coupling with a low-lying spin doublet being fully populated at T < 10 K. The values of the intramolecular antiferromagnetic interactions in 3 are -19.9 (across tppz) and -32.9 cm(-1)(through bridging croconato). Density functional type calculations were performed on model dinuclear fragments of 3 in order to analyze the efficiency of the exchange pathways involved and also to substantiate the coupling parameters.     

Magneto-structural studies on heterobimetallic malonate-bridged M(II)Re(IV) complexes (M = Mn, Co, Ni and Cu)

The mononuclear Re(IV) compound of formula (PPh(4))(2)[ReBr(4)(mal)] (1) was used as a ligand to obtain the heterobimetallic species [ReBr(4)(μ-mal)Co(dmphen)(2)]· MeCN (2), [ReBr(4)(μ-mal)Ni(dmphen)(2)] (3), [ReBr(4)(μ-mal)Mn(dmphen)(2)] (4a), [ReBr(4)(μ-mal)Mn(dmphen)(H(2)O)(2)]·dmphen·MeCN·H(2)O (4b), [ReBr(4)(μ-mal)Cu(phen)(2)]·1/4H(2)O (5) and [ReBr(4)(μ-mal)Cu(bipy)(2)] (6) (mal = malonate dianion, dmphen = 2,9-dimethyl-1,10-phenanthroline, phen = 1,10-phenanthroline and bipy = 2,2'-bipyridine). The structures of 2 and 5 (single-crystal X-ray diffraction) are made up of neutral [ReBr(4)(μ-mal)M(AA)] dinuclear units [AA = dmphen with M = Co (2) and AA = phen with M = Cu (5)] where the metal ions are connected through a malonate ligand which exhibits simultaneously the bidentate [at the Re(IV)] and monodentate [at the M(II)] coordination modes. The carboxylate-malonate group in them adopts the anti-syn conformation with intramolecular ReM separation of 5.098(8) (2) and 4.947(2) ? (5). The magnetic properties of 1-6 were investigated in the temperature range 1.9-295 K. The magnetic behaviour of 1 is the expected for a magnetically isolated Re(IV) complex with a large value of the zero-field splitting (2D ca. -70 cm(-1)) whereas weak antiferromagnetic interactions between Re(IV) and M(II) are observed in the heterobimetallic compounds 2 (J = -0.63 cm(-1)), 3 (J = -1.37 cm(-1)), 4a (J = -1.29 cm(-1)), 5 (J = -1.83 cm(-1)) and 6 (J = -0.26 cm(-1)). Remarkably, 4b behaves as a ferrimagnetic chain with regular alternating Re(IV) and Mn(II) cations (J = -2.64 cm(-1)).     

Enhancing the magnetic coupling of oxalato-bridged Re(IV)2M(II) (M=Mn, Co, Ni, and Cu) trinuclear complexes via peripheral halide ligand effects

Four heterotrinuclear Re(IV)(2)M(II) compounds of general formula (NBu(4))(2)[{Re(IV)Br(4)(μ-ox)}(2)M(II)(Him)(2)] [NBu(4)(+) = tetra-n-butylammonium cation, ox = oxalate, Him = imidazole; M = Mn (1), Co (2), Ni (3), and Cu (4)] have been synthesized by using the novel mononuclear complex [Re(IV)Br(4)(ox)](2-) as a ligand toward divalent first-row transition metal ions in the presence of imidazole. Compounds 1-4 are isostructural complexes whose structure contains discrete trinuclear [{Re(IV)Br(4)(μ-ox)}(2)M(II)(Him)(2)](2-) anions and bulky NBu(4)(+) cations. The Re and M atoms are six-coordinated: four peripheral bromo and two oxalate-oxygens (at Re), and two cis-coordinated imidazole molecules and four oxygen atoms from two oxalate ligands (at M), build distorted octahedral surroundings. Two peripheral [ReBr(4)(ox)](2-) units act as bidentate ligands through the oxalate group toward the central [M(II)(Him)(2)] fragment affording the trinuclear entities. The values of the intramolecular Re···M separation are 5.62(1) (1), 5.51(1) (2), 5.46(1) (3), and 5.55(1) ? (4). Magnetic susceptibility measurements on polycrystalline samples of 1-4 in the temperature range of 1.9-300 K show the occurrence of intramolecular antiferro- [J = -1.1 cm(-1) (1)] and ferromagnetic interactions [J = +3.9 (2), +19.7 (3), and +14.4 cm(-1) (4)], the Hamiltonian being defined as H? = -J [S?(M)(S?(Re1) + S?(Re2))]. The larger spin delocalization on the oxalato bridge in 1-4 when compared to the trinuclear Re(IV)(2)M(II) complexes with chloro instead of bromo as peripheral ligands (1'-4') accounts for the strengthening of the magnetic interactions in 1-4 [J = -0.35 (1'), +14.2 (3'), and +7.7 cm(-1) (4')]. An incipient frequency dependence of the out-of-phase ac signals of 3 at very low temperatures is reminiscent of a system with slow relaxation of the magnetization, a phenomenon characteristic of single-molecule magnet behavior.     

A Mixed-valent Hexanuclear CuⅡ-CuⅠ Complex with Unusual Tridentate pbi Ligand (pbi= 2-(2-Pyridyl)-benzimidazole)

A mixed-valent hexanuclear complex [CuⅡCuⅠ2(pbi)2Br2]2 (pbi = (2-(2-pyridyl)-benzimidazole) exhibiting a dimeric unit bridged by two Br atoms was synthesized by hydrothermal reaction.Interestingly, there exist intramolecular and intermolecular π-πstacking interactions as well as metalaromatic ring interactions in the title complex. The crystal belongs to the monoclinic system, space group P-1, with a = 7.1061(9), b = 12.1008(13), c = 14.0711(17) (A), α = 91.742(8), β = 100.155(9), γ =90.486(7)°, V = 1190.3(2)(A)3, Z = 2, C48H32Br4Cu6N12, Mr = 1477.74, Dc= 2.061 g/cm3, F(000) = 718,μ(MoKα) = 6.039 mm-1, the final R = 0.0481 and wR = 0.0974 for 3426 observed reflections (I＞2σ(I)).     

Syntheses and structures of copper(I) complexes based on Cu(n)X(n) (X = Br and I; n = 1, 2 and 4) units and bis(pyridyl) ligands with longer flexible spacer

Self-assembly of four bis(pyridyl) ligands with longer flexible spacer: 1,4-bis(3-pyridylaminomethyl)benzene (L1), 1,4-bis(2-pyridylaminomethyl)benzene (L2), 1,3-bis(3-pyridylaminomethyl)benzene (L3) and 1,3-bis(2-pyridylaminomethyl)benzene (L4), and CuX (X = Br and I) leads to the formation of eight [Cu(n)X(n)]-based (X = Br and I; n = 1, 2, and 4) complexes, [Cu(2)I(2)L1(PPh(3))(4)] (1), [Cu(4)Cl(2)Br(2)(L4)(2)(PPh(3))(6)]·(CH(3)CN)(2) (2), [Cu(2)I(2)(L3)(2)] (3), {[Cu(2)Br(2)L2(PPh(3))(2)]·(CH(2)Cl(2))(2)}(n) (4), [CuIL1](n)·nCH(2)Cl(2) (5), [CuIL1](n) (6), [CuIL4](n) (7) and [Cu(2)I(2)L4](n) (8), which have been synthesized and characterized by elemental analysis, IR, TG, powder and single-crystal X-ray diffraction. Structural analyses show that the eight complexes possess an increasing dimensionality from 0D (1-3) to 1D (4) to 2D (5-8), in which 1 and 2 contain a CuX unit, 2-7 contain a Cu(2)X(2) unit and 8 contains a Cu(4)X(4) unit. Such evolvement indicates that the conformation of flexible bis(pyridyl) ligands and the participation of triphenylphosphine (PPh(3)) as a second ligand take an essential role in the framework formation of the Cu(i) complexes. Moreover, a pair of symmetry-related L3 ligands in complex 3 coordinate to the rhomboid Cu(2)I(2) dimer to form "handcuff-shaped" dinuclear structures, which are further joined together through intermolecular N-HI hydrogen bonds to furnish a 2D (4,4) layer. Although complexes 5 and 6 exhibit a similar 2D (4,4) layer constructed from L1 ligand bridging [Cu(2)I(2)](n) units, the different packing fashion of the layers leads to the formation of 3D porous frameworks of 5 and dense 3D frameworks of 6. The "twisted-boat" conformation of the Cu(4)I(4) tetramer unit in complex 8 has not been reported so far.     

Module-based assembly of copper(II) chloranilate compounds: syntheses, crystal structures, and magnetic properties of [[Cu(2)(CA)(terpy)(2)][Cu(CA)(2)]](n)() and [[Cu(2)(CA)(terpy)(2)(dmso)(2)][Cu(CA)(2)(dmso)(2)](EtOH)](n)(H(2)CA = chloranilic acid, terpy = 2,2':6',2' '-terpyridine, dmso = dimethyl sulfoxide)

Two new copper(II) compounds of chloranilate and 2,2':6',2' '-terpyridine have been synthesized, and the structures have been solved by the single-crystal X-ray diffraction method. The crystal structure of [[Cu(2)(CA)(terpy)(2)][Cu(CA)(2)]](n)(1), where H(2)CA = chloranilic acid and terpy = 2,2':6',2' '-terpyridine, consists of two modules, the dimer unit [Cu(2)(CA)(terpy)(2)](2+) and the anionic mononuclear unit [Cu(CA)(2)](2)(-), forming an alternated chain. The chain is stabilized by semicoordinating and additional but efficient secondary bonding interactions. The crystal structure of [[Cu(2)(CA)(terpy)(2)(dmso)(2)][Cu(CA)(2)(dmso)(2)](EtOH)](n)(2), where dmso = dimethyl sulfoxide, consists of solvent molecules and two discrete modules, the dimer unit [Cu(2)(CA)(terpy)(2)(dmso)(2)](2+) and the anionic mononuclear unit [Cu(CA)(2)(dmso)(2)](2)(-). The dimer units form a layer by secondary bonding interactions, and the monomer units and ethanol molecules are introduced between the layers. The magnetic properties of 1 and 2 have been investigated in the temperature range 2.0-300 K. A weak ferromagnetic interaction was observed in 1, J(a) = 2.36 cm(-)(1) and zJ(b) = -0.68 cm(-)(1) while no exchange coupling was observed in 2.     

Copper(I) complex O(2)-reactivity with a N(3)S thioether ligand: a copper-dioxygen adduct including sulfur ligation, ligand oxygenation, and comparisons with all nitrogen ligand analogues

In order to contribute to an understanding of the effects of thioether sulfur ligation in copper-O(2) reactivity, the tetradentate ligands L(N3S) (2-ethylthio-N,N-bis(pyridin-2-yl)methylethanamine) and L(N3S')(2-ethylthio-N,N-bis(pyridin-2-yl)ethylethanamine) have been synthesized. Corresponding copper(I) complexes, [CuI(L(N3S))]ClO(4) (1-ClO(4)), [CuI(L(N3S))]B(C(6)F(5))(4) (1-B(C(6)F(5))(4)), and [CuI(L(N3S'))]ClO(4) (2), were generated, and their redox properties, CO binding, and O(2)-reactivity were compared to the situation with analogous compounds having all nitrogen donor ligands, [CuI(TMPA)(MeCN)](+) and [Cu(I)(PMAP)](+) (TMPA = tris(2-pyridylmethyl)amine; PMAP = bis[2-(2-pyridyl)ethyl]-(2-pyridyl)methylamine). X-ray structures of 1-B(C(6)F(5))(4), a dimer, and copper(II) complex [Cu(II)(L(N3S))(MeOH)](ClO(4))(2) (3) were obtained; the latter possesses axial thioether coordination. At low temperature in CH(2)Cl(2), acetone, or 2-methyltetrahydrofuran (MeTHF), 1 reacts with O(2) and generates an adduct formulated as an end-on peroxodicopper(II) complex [{Cu(II)(L(N3S))}(2)(mu-1,2-O(2)(2-))](2+) (4)){lambda(max) = 530 (epsilon approximately 9200 M(-1) cm(-1)) and 605 nm (epsilon approximately 11,800 M(-1) cm(-1))}; the number and relative intensity of LMCT UV-vis bands vary from those for [{Cu(II)(TMPA)}(2)(O(2)(2-))](2+) {lambda(max) = 524 nm (epsilon = 11,300 M(-1) cm(-1)) and 615 nm (epsilon = 5800 M(-1) cm(-1))} and are ascribed to electronic structure variation due to coordination geometry changes with the L(N3S) ligand. Resonance Raman spectroscopy confirms the end-on peroxo-formulation {nu(O-O) = 817 cm(-1) (16-18O(2) Delta = 46 cm(-1)) and nu(Cu-O) = 545 cm(-1) (16-18O(2) Delta = 26 cm(-1)); these values are lower in energy than those for [{Cu(II)(TMPA)}(2)(O(2)(2-))](2+) {nu(Cu-O) = 561 cm(-1) and nu(O-O) = 827 cm(-1)} and can be attributed to less electron density donation from the peroxide pi* orbitals to the Cu(II) ion. Complex 4 is the first copper-dioxygen adduct with thioether ligation; direct evidence comes from EXAFS spectroscopy {Cu K-edge; Cu-S = 2.4 Angstrom}. Following a [Cu(I)(L(N3S))](+)/O(2) reaction and warming, the L(N3S) thioether ligand is oxidized to the sulfoxide in a reaction modeling copper monooxygenase activity. By contrast, 2 is unreactive toward dioxygen probably due to its significantly increased Cu(II)/Cu(I) redox potential, an effect of ligand chelate ring size (in comparison to 1). Discussion of the relevance of the chemistry to copper enzyme O(2)-activation, and situations of biological stress involving methionine oxidation, is provided.     

Copper(II) complexes of a series of alkoxy diazine ligands: mononuclear, dinuclear, and tetranuclear examples with structural, magnetic, and DFT studies

Picolyl hydrazide ligands have two potentially bridging functional groups (micro-O, micro-N-N) and consequently can exist in different coordination conformers, both of which form spin-coupled polynuclear coordination complexes, with quite different magnetic properties. The complex [Cu(2)(POAP-H)Br(3)(H(2)O)] (1) involves a micro-N-N bridge (Cu-N-N-Cu 150.6 degrees ) and exhibits quite strong antiferromagnetic coupling (-2J = 246(1) cm(-)(1)). [Cu(2)(PZOAPZ-H)Br(3)(H(2)O)(2)] (2) has two Cu(II) centers bridged by an alkoxide group with a very large Cu-O-Cu angle of 141.7 degrees but unexpectedly exhibits quite weak antiferromagnetic exchange (-2J = 91.5 cm(-)(1)). This is much weaker than anticipated, despite direct overlap of the copper magnetic orbitals. Density functional calculations have been carried out on compound 2, yielding a similar singlet-triplet splitting energy. Structural details are reported for [Cu(2)(POAP-H)Br(3)(H(2)O)] (1), [Cu(2)(PZOAPZ-H)Br(3)(H(2)O)(2)] (2), [Cu(2)(PAOPF-2H)Br(2)(DMSO)(H(2)O)].H(2)O (3), [Cu(4)(POMP-H))(4)](NO(3))(4).2H(2)O (4), and PPOCCO (5) (a picolyl hydrazide ligand with a terminal oxime group) and its mononuclear complexes [Cu(PPOCCO-H)(NO(3))] (6) and [Cu(PPOCCO-H)Cl] (7). Compound 1 (C(12)H(13)Br(3)Cu(2)N(5)O(4)) crystallizes in the monoclinic system, space group P2(1)/c, with a = 15.1465(3) A, b = 18.1848(12) A, c = 6.8557(5) A, beta = 92.751(4) degrees, and Z = 4. Compound 2 (C(10)H(13)Br(3)Cu(2)N(7)O(4)) crystallizes in the triclinic system, space group P, with a = 9.14130(1) A, b = 10.4723(1) A, c = 10.9411(1) A, alpha = 100.769(1), beta = 106.271(1) degrees, gamma = 103.447(1) degrees, and Z = 2. Compound 3 (C(23)H(22)Br(2)Cu(2)N(7)O(5.5)S) crystallizes in the monoclinic system, space group P2(1)/c, with a = 12.406(2) A, b = 22.157(3) A, c = 10.704(2) A, beta = 106.21(1) degrees, and Z = 4. Compound 4(C(52)H(48)Cu(4)N(20)O(18)) crystallizes in the monoclinic system, space group P2(1)/n, with a = 14.4439(6) A, b = 12.8079(5) A, c = 16.4240(7) A, beta = 105.199(1) degrees, and Z = 4. Compound 5 (C(15)H(14)N(4)O(2)) crystallizes in the orthorhombic system, space group Pna2(1), with a = 7.834(3) A, b = 11.797(4) A, c = 15.281(3) A, and Z = 4. Compound 6(C(15)H(13)CuN(5)O(5)) crystallizes in the monoclinic system, space group P2(1)/c, with a = 8.2818(9) A, b = 17.886(2) A, c = 10.828(1) A, beta = 92.734(2) degrees, and Z = 4. Compound 7 (C(15)H(13)CuClN(4)O(2)) crystallizes in the orthorhombic system, space group Pna2(1), with a = 7.9487(6) A, b = 14.3336(10) A, c = 13.0014(9) A, and Z = 4. Density functional calculations on PPOCCO are examined in relation to the anti-eclipsed conformational change that occurs on coordination to copper(II).     

Copper(I)/S(8) reversible reactions leading to an end-on bound dicopper(II) disulfide complex: nucleophilic reactivity and analogies to copper-dioxygen chemistry

Elemental sulfur (S8) reacts reversibly with the copper(I) complex [(TMPA')CuI](+) (1), where TMPA' is a TMPA (tris(2-pyridylmethyl)amine) analogue with a 6-CH2OCH3 substituent on one pyridyl ligand arm, affording a spectroscopically pure end-on bound disulfido-dicopper(II) complex [{(TMPA')Cu(II)}2(mu-1,2-S2(2-))](2+) (2) {nu(S-S) = 492 cm(-1); nu(Cu-S)sym = 309 cm(-1)}; by contrast, [(TMPA)Cu(I)(CH3CN)](+) (3)/S8 chemistry produces an equilibrium mixture of at least three complexes. The reaction of excess PPh3 with 2 leads to formal "release" of zerovalent sulfur and reduction of copper ion to give the corresponding complex [(TMPA')Cu(I)(PPh3)](+) (11) along with S=PPh3 as products. Dioxygen displaces the disulfur moiety from 2 to produce the end-on Cu2O2 complex, [{(TMPA')Cu(II)}2(mu-1,2-O2(2-)](2+) (9). Addition of the tetradentate ligand TMPA to 2 generates the apparently more thermodynamically stable [{(TMPA)Cu(II)}2(mu-1,2-S2(2-))](2+) (4) and expected mixture of other species. Bubbling 2 with CO leads to the formation of the carbonyl adduct [(TMPA')CuI(CO)](+) (8). Carbonylation/sulfur-release/CO-removal cycles can be repeated several times. Sulfur atom transfer from 2 also occurs in a near quantitative manner when it is treated with 2,6-dimethylphenyl isocyanide (ArNC), leading to the corresponding isothiocyanate (ArNCS) and [(TMPA')Cu(I)(CNAr)](+) (12). Complex 2 readily reacts with PhCH2Br: [{(TMPA')Cu(II)}2(mu-1,2-S(2)(2-)](2+) (2) + 2 PhCH2Br --> [{(TMPA')Cu(II)(Br)}2](2+) (6) + PhCH2SSCH2Ph. The unprecedented substrate reactivity studies reveal that end-on bound mu-1,2-disulfide-dicopper(II) complex 2 provides a nucleophilic S2(2-) moiety, in striking contrast to the electrophilic behavior of a recently described side-on bound mu-eta(2):eta(2)-disulfido-dicopper(II) complex, [{(N3)Cu(II)}(2)(mu-eta(2):eta(2)-S2(2-))](2+) (5) with tridentate N3 ligand. The investigation thus reveals striking analogies of copper/sulfur and copper/dioxygen chemistries, with regard to structure type formation and specific substrate reactivity patterns.     

High-frequency, high-field EPR; magnetic susceptibility; and X-ray studies on a ferromagnetic heterometallic complex of diethanolamine (H2L), [Cu4(NH3)4(HL)4][CdBr4]Br2.3dmf.H2O

The novel heterometallic complex [Cu(4)(NH(3))(4)(HL)(4)][CdBr(4)]Br(2).3dmf.H(2)O has been prepared in the reaction of zerovalent copper with cadmium oxide in the air-exposed solution of ammonium bromide and diethanolamine (H(2)L) in dimethylformamide (dmf). The compound is monoclinic, with space group P2(1)/c, a = 14.876(3) A, b = 33.018(6) A, c = 11.437(2) A, beta = 108.182(3)(o), and Z = 4. The crystal lattice consists of [Cu(4)(NH(3))(4)(HL)(4)](4+) cations, [CdBr(4)](2)(-), Br(-) anions, and uncoordinated dmf and water molecules. In the cation, four independent Cu atoms occupy vertexes of a distorted tetrahedron with bridged Cu...Cu distances in the range 3.127(2)-3.333(3) A and other Cu...Cu separations being 3.445(3)-3.503(2) A. The magnetic susceptibility and the EPR spectra were measured over the temperature ranges 1.8-300 and 3-300 K, respectively. The magnetic moment was found to increase with decreasing temperature to reach a maximum of 2.60 muB per one copper atom at ca. 10 K and was found, subsequently, to diminish slightly at lower temperatures owing to zero-field and Zeeman splitting of the S = 2 ground state. The temperature dependence of the magnetic susceptibility was fitted to the spin Hamiltonian H = J(ab)S(a)S(b) + J(bc)S(b)S(c) + J(cd)S(c)S(d) + J(ad)S(a)S(d) + J(ac)S(a)S(c) + J(bd)S(b)S(d) with the exchange integrals J(ab) = J(bc) = J(cd) = J(ad) = -65(3) cm(-1) and J(ac) = J(bd) = +1(3) cm(-1). High-field, high-frequency (95-380 GHz) EPR spectra due to an S = 2 ground state were simulated with g(x) = 2.138(1), g(y)) = 2.142(1), g(z) = 2.067(1), D = -0.3529(3) cm(-1), and E = -0.0469(8) cm(-1). Calculations based on the X-ray structure indicate a negligible contribution of the magnetic dipole-dipole interactions to the zfs parameters D and E. A discussion of the isotropic and anisotropic exchange interactions and their effect on the zfs parameters is also given.     

Linear Trinuclear Pt.Mo-Mo Complexes [Mo(2)PtX(2)(pyphos)(2)(O(2)CR)(2)](2) (X = Cl, Br, I; R = CH(3), C(CH(3))(3); pyphos = 6-(Diphenylphosphino)-2-pyridonate) with an Axial Interaction between the Quadruply Bonded Mo(2) Moiety and the Platinum Atom

An example of a direct axial interaction of a platinum(II) atom with a Mo(2) core through a uniquely designed tridentate ligand 6-(diphenylphosphino)-2-pyridonate (abbreviated as pyphos) is described. Treatment of PtX(2)(pyphosH)(2) (2a, X = Cl; 2b, X = Br; 2c, X = I) with a 1:1 mixture of Mo(2)(O(2)CCH(3))(4) and [Mo(2)(O(2)CCH(3))(2)(NCCH(3))(6)](2+) (3a) in dichloromethane afforded the linear trinuclear complexes [Mo(2)PtX(2)(pyphos)(2)(O(2)CCH(3))(2)](2) (4a, X = Cl; 4b, X = Br; 4c, X = I). The reaction of [Mo(2)(O(2)CCMe(3))(2)(NCCH(3))(4)](2+) (3b) with 2a-c in dichloromethane afforded the corresponding pivalato complexes [Mo(2)PtX(2)(pyphos)(2)(O(2)CCMe(3))(2)](2) (5a, X = Cl; 5b, X = Br; 5c, X = I), whose bonding nature is discussed on the basis of the data from Raman and electronic spectra as well as cyclic voltammograms. The linear trinuclear structures in 4b and 5a-c were confirmed by NMR studies and X-ray analyses: 4b, monoclinic, space group C2/c, a = 34.733(4) ?, b = 17.81(1) ?, c = 22.530(5) ?, beta = 124.444(8) degrees, V = 11498(5) ?(3), Z = 8, R = 0.060 for 8659 reflections with I > 3sigma(I) and 588 parameters; 5a, triclinic, space group P&onemacr;, a = 13.541(3) ?, b = 17.029(3) ?, c = 12.896(3) ?, alpha = 101.20(2) degrees, beta = 117.00(1) degrees, gamma = 85.47(2) degrees, V = 2599(1) ?(3), Z = 2, R = 0.050 for 8148 reflections with I > 3sigma(I) and 604 parameters; 5b, triclinic, space group P&onemacr;, a = 12.211(2) ?, b = 20.859(3) ?, c = 10.478(2) ?, alpha = 98.88(1) degrees, beta = 112.55(2) degrees, gamma = 84.56(1) degrees, V = 2433.3(8) ?(3), Z = 2, R = 0.042 for 8935 reflections with I > 3sigma(I) and 560 parameters; 5c, monoclinic, space group P2(1)/n, a = 13.359(4) ?, b = 19.686(3) ?, c = 20.392(4) ?, beta = 107.92(2) degrees, V = 5101(2) ?(3), Z = 4, R = 0.039 for 8432 reflections with I > 3sigma(I) and 560 parameters.