A Triptycene‐Based Approach to Solubilising Carbon Nanotubes and C60

We describe herein the synthesis of a triptycene‐based surfactant designed with the ability to solubilise single‐walled carbon nanotubes (SWNTs) and C₆₀ in water through non‐covalent interactions. Furthermore, an amphiphilic naphthalene‐based surfactant with the same ability to solubilise SWNTs and C₆₀ has also been prepared. The compounds synthesised were designed with either two ionic or non‐ionic tails to ensure a large number of supramolecular interactions with the solvent, thereby promoting strong solubilisation. The surfactants produced stable suspensions in which the SWNTs are dispersed and the surfactant/SWNT complexes formed are stable for more than one year. UV/Vis/NIR absorption spectroscopy, TEM and AFM were employed to probe the solubilisation properties of the dispersion of surfactants and SWNTs in water.     

Nonionic Micellar Catalyzed Oxidation of Vitamins by Chloramine-T in HClO4 Medium: A Kinetic Study

The kinetics of oxidation of vitamin B₁ (thiamine hydrochloride) and vitamin B₆ (pyridoxine hydrochloride) by chloramine-T (CAT) in perchloric acid medium and in presence of a non ionic surfactant (Triton x-100) have been investigated. A catalytic effect of the nonionic micelle on the rate of oxidation has been observed and rate is found to be proportional to 7lcub;k′ + k″ [Triton x-100]}, where k′ and k″ are the rate constants in absence and presence of surfactant, respectively. The rate shows a first-order, a fractional order and a zero order dependence on [Chloramine-T]_o, [Vitamin]_o and [H⁺]₀, respectively in absence as well as in presence of surfactant. A mechanism involving association/binding between the oxidant and the surfactant micelle, which is supported by spectrophotometric evidence has been proposed. The binding parameters have also been evaluated using a pseudo-phase kinetic model.     

Aggregation Number of Ionic Surfactants and its Application for Alkyltrimethyl Ammonium Bromides and Sodium Tetradecyl Sulfate by Potentiometric Technique

A potentiometric technique based on surfactant ion selective electrode has been used for various cationic and anionic surfactants. The data obtained contain m ₁ (surfactant monomer concentration); m ₂ (free counterion concentration) and α (degree of dissociation of micelle) were used for determination of aggregation number at and above cmc (critical micelle concentration). Data fitting show a relationship between aggregation number with such parameters. The correlation equation obtained shows that size of ionic micelle vary sharply after cmc. Also, the equation obtained shows size of micelle growth with increase in counterion concentration.     

Studies on the interaction of bacterial capsular polysaccharide- Klebsiella K16 with cationic and mixed surfactants

The spectral studies of cationic dyes, pinacyanol chloride (PCYN) and acridine orange (AO) with capsular polysaccharide Klebsiella K16 (PK16) biopolymer in micellar media reveal many interesting phenomena. Intensity of the metachromatic band (μ) at 490 nm decreases gradually on addition of cationic single surfactant to the biopolymer PK16–dye system of P/D = 30, whereas the intensity of α and β bands reach to the value of original pure dye. As a result, the cationic surfactant destroys the metachromatic compound and forms a new complex with biopolymer PK16 by freeing the dye molecule. Enhancement of fluorescence intensity of AO-PK16 system with cationic surfactant is another evidence for the binding between the biopolymer and the surfactant. Interaction between the biopolymer and mixed surfactant has also been studied. Finally, the binding ability of cationic surfactants with or without non ionic surfactant, the idea of the critical aggregation concentration (cac) of the surfactant, mole fraction and the charge density of mixed surfactant for binding with PK16 and also the site of interaction have been pointed out.     

Effect of Amino‐Acid‐Based Polar Oils on the Krafft Temperature and Solubilization in Ionic and Nonionic Surfactant Solutions

Abstract

The Krafft temperature and solubilization power of ionic and nonionic surfactants in aqueous solutions are strongly affected by added polar oils such as amino‐acid‐based oils (e.g., N‐acylamino acid esters, AAE), because they tend to be solubilized in the surfactant palisade layer. The Krafft temperatures of 5 wt.% sodium dodecyl sulfate (SDS)‐water and octaoxyethylene octadecyl ether (C₁₈EO₈)‐water systems largely decreases upon addition of AAE and 1‐hexanol, whereas it decreases very slightly in isopropyl myristate (IPM) and n‐dodecane. The lowering of the Krafft temperature can be explained by the same mechanism as the melting‐temperature reduction of mixing two ordinary substances. Namely, the polar oils are solubilized in the surfactant palisade layer of micelles and reduce the melting temperature of hydrated solid‐surfactant (Krafft temperature). On the other hand, non‐polar oil such as dodecane is solubilized deep inside micelles and makes an oil pool. The solubilization of non‐polar oil is enhanced by mixing surfactant with AAE due to an increase in micellar size.     

Physicochemical Properties and Surface Tension Prediction of Mixed Surfactant Systems: Triton X‐100 with Dodecylpyridinium Bromide and Triton X‐100 with Sodium Dodecylsulfonate

Dependences of the surface tension of aqueous solutions of ionic (dodecylpyridinium bromide, sodium dodecylsulfonate) and nonionic (Triton X‐100) surfactants and their mixtures on total surfactant concentration and solution composition were studied, and the surface tension of the mixed systems were predicted using different Miller's model. It was found that how to select the model for calculation of ω is corresponding to the degree of the deviation from the ideality during the adsorption of mixed surfactants. The compositions of micelles and adsorption layers at air‐solution interface as well as parameters (β^m, β^ads) of headgroup‐headgroup interaction between the molecules of ionic and nonionic surfactants were calculated based on Rubingh model. The parameters (B₁) of chain‐chain interaction between the molecules of ionic and nonionic surfactants were calculated based on Maeda model. The free energy of micellization calculated from the phase separation model (ΔG ₂ ^m ), and by Maeda's method (ΔG ₁ ^m ) agree reasonably well at high content of nonionic surfactant. The excess free energy ΔG _ads ^E and ΔG _m ^E (except α=0.4) for TX‐100/SDSn system are more negative than that TX‐100/DDPB system. These can be probably explained with the EO groups of TX‐100 surfactant carrying partial positive charge.     

Ligandless C‐C bond formation via Suzuki–Miyaura reaction in micelles or water–ethanol solution using PdPtZn and PdZn nanoparticle thin films

PdPtZn and PdZn nanoparticle (NP) thin films were synthesized by the reduction of [PdCl₂(cod)], [PtCl₂(cod)] (cod = cis,cis‐1,5‐cyclooctadiene) and [Zn(acac)₂] (acac = acetylacetonate) complexes at an oil–water interface. The structure and morphology of the as‐prepared NPs were characterized with X‐ray diffraction, transmission electron microscopy and energy dispersive analysis of X‐rays. Catalytic activity of the prepared NPs was investigated in the Suzuki–Miyaura cross‐coupling reaction in H₂O–EtOH and various micellar media systems such as cetyltrimethylammonium bromide (cationic surfactant), sodium dodecylsulfate (anionic surfactant) and Pluronic P123 (non‐ionic surfactant). PdPtZn and PdZn thin films exhibited higher catalytic activity compared to Pd thin film in the Suzuki–Miyaura coupling reaction due to the appropriate interaction between palladium, platinum and zinc metals. Copyright © 2015 John Wiley & Sons, Ltd.     

On the Volume Chemistry of Solid Compounds: the Legacy of Wilhelm Biltz

For the calculation of the atomic or ionic volumes the Quantum Theory of Atoms In Molecules method was applied. The regions (basins) around the nuclei confined by the zero‐flux surfaces in the electron density gradient are called QTAIM atoms. They are non‐overlapping and completely fill the space. The volume of the basins gives volumes of atoms or ions. The integration of the electron density within the volumina yields effective charges, defining neutral or ionic character of the given QTAIM species. Present investigations refer to metal hydrides, metal nitrides and to intermetallic compounds of the system Al‐Pt. A linear relation between the ionic volumina of hydrogen or nitrogen established according to QTAIM and after Biltz has been found with (homodesmic) binary metal hydrides and binary metal nitrides, but has been observed merely as a trend with stronger deviations for heterodesmic compounds, such as ternary hydrido‐ and nitridometallates A_a[M_mX_x] (A – alkali or alkaline earth metal, M – transition metal and X – H or N). The deviation from linearity for heterodesmic compounds is caused by the different kinds of chemical bonds being present within the [M_mX_x] anions on the one hand and between the anions and the cations on the other hand reflected by the calculated volumes and the QTAIM charges of M and X components. Concerning the intermetallic compounds of the system Al‐Pt, the quantum chemical calculations reveal negative charges for the platinum atoms and positive ones for the aluminium atoms in accordance with their electronegativities. Introducing the variation of the atomic volume with the composition extends the Vegard's approach and gives a non‐linear slope for the concentration dependence of mean atomic volume which explains qualitatively the experimental results.     

Solubilization of an Ionic Liquid,l-Butyl-3-methylimidazolium Hexafluorophosphate,in a Surfactant-Water System

The amphiphilic association structures were determined in the system; water, Laureth 4 (approximately C₁₂(EO) ₄), and the ionic liquid l-butyl-3-methylimidazolium hexafluorophosphate ([bmim[PF₆]), using visual observation and small angle x-ray diffraction. The system showed a lamellar liquid crystal solubilizing the ionic liquid ([bmim[PF₆]) to a maximum of 15%, an isotropic surfactant solution dissolving the ionic liquid to a maximum of 39%, an isotropic ionic liquid solution with less than 0.5% of water and surfactant and finally, an aqueous solution with only traces of surfactant and ionic liquid. The small angle x-ray diffraction results showed the ionic liquid to be solubilized into the lamellar liquid crystal without changing the dimensions of the amphiphile layer or the interlayer spacing dependence on the water content.     

Thermodynamic and spectroscopic studies on cationic surfactant tetradecyltrimethylammonium bromide in aqueous solution of trisubstituted ionic liquid 1, 2-dimethyl-3-octylimidazolium chloride at different temperatures

In this work, the effects on micellar behavior of long chain cationic surfactant tetradecyltrimethylammonium bromide (TTAB) upon the addition of trisubstituted ionic liquid (IL), 1, 2-dimethyl-3-octylimidazolium chloride [odmim][Cl] at temperatures, 298.15–318.15 K has been studied. Different techniques such as conductance, surface tension, fluorescence and ¹H NMR have been employed to understand the interactional mechanisms. The values of critical micelle concentration (cmc) and various thermodynamic parameters have been calculated from conductivity measurements. The surface parameters like effectiveness of decrease in surface tension (Π_cmc), minimum surface area occupied per surfactant monomer (A_min), maximum surface excess concentration (Γ_max), and adsorption efficiency (pC₂₀) have been evaluated by surface tension measurements. Micellar aggregation number (N_agg) has been determined by quenching of pyrene. Further to understand interactions in post micellar region, ¹H NMR measurements have been performed. It has been observed that the lipophilicity of interacting ion modified the thermodynamic and aggregation properties of TTAB.     

Rheological properties of the aqueous solution for fluorocarbon‐containing hydrophobically modified sodium polyacrylic acid with various surfactants

The interaction of fluorocarbon‐ containing hydrophobically modified sodium polyacrylic acid (FMPAANa) (0.5 wt%) with various surfactants (anionic, nonionic and cationic) has been investigated by rheological measurements. Different rheological behaviors are displayed for ionic surfactants and nonionic surfactants. Fluorinated surfactants have stronger affinity with polyelectrolyte hydrophobes comparing with hydrogenated surfactants. The hydrophobic association of FMPAANa with a cationic surfactant (CTAB) and a fluorinated nonionic surfactant (FC171) is much stronger than with a nonionic surfactant (NP7. 5) and an anionic surfactant (FC143). Further investigation of the effects of temperature on solution properties shows that the dissociation energy E_m is correlated to the strength of the aggregated junctions.     

Activity coefficients for HCl+NiCl2+H2O at 298.15°K and effects of higher-order electrostatic terms

Activity coefficients for CHl in the system HCl+NiCl ₂ +H ₂ O at 298.15°K at constant total ionic strengths of 0.1, 0.5, 1.0, 2.0, and 3.0 moles-kg ^–1 have been determined by an emf method. A comparison was made between Scatchard's and Pitzer's interpretations of mixed-electrolyte solutions for this system and six related systems. Preference can be given to Pitzer's method provided cognizance is taken of the effects of higher-order electrostatic terms beyond the Debye-Hückel approximation on the thermodynamic properties of asymmetrical mixtures.     

Phase behaviour of lyotropic liquid crystalline side chain polymers in aqueous solutions

Amphiphilic lyotropic liquid crystalline surfactants are synthesized displaying 10-undecenoic acid as hydrophobic and ethyleneglycol units as hydrophilic parts of the molecules. By addition reaction of the monomeric surfactants with poly [oxy(methylsilylene)], the surfactants are attached as side chains to the siloxane main chain. The phase behaviour of a polymer-water system and the corresponding monomer-water system is investigated by polarizing microscopy. The monomeric surfactant exhibits a liquid crystallineM ₁-phase of hexagonally packed, rod-like micelles in a concentration range of 49 to 70% surfactant. The liquid crystalline state of the polymeric surfactant is more stable, which is indicated by a broader temperature- and concentration range (35%–90% polymer surfactant). At lower concentration aM ₁-phase exists, which is separated by a cubic phase from a lamellarG-phase at higher concentration of the polymer surfactant. Compared to the monomeric system, the increased stability of the polymeric mesophase can be understood by the restriction of motions of the amphiphiles due to the linkage to the polymer main chain.Dedicated to Prof. Dr. F. H. Müller.The authors are greatly indebted to Wacker Chemie, D-Burghausen, FRG for kindly delivering the poly(hydrogensiloxane).     

The time dependence of chitosan/nonionic surfactant solution viscosity

The measurement of the viscosity of semiconcentrated chitosan (0.08–0.14%) solutions in the system with octaethyleneglycolmonon-dodecylether (C₁₂E₈) was carried out using Cannon-Fenske capillary viscometer. The interaction was—as expected—very weak, vut when the time dependent hydrodynamic behaviour of the system was considered, the interaction has been established at particular surfactant concentrations. The most significant time dependence is shown in a form of sudden viscosity drop in a region close to and above CMC value of the surfactant, which implied existence of the interaction between chitosan and surfactant. At low surfactant concentrations viscosity values vere constant with increasing surfactant concentration, but solution also showed time dependent decrease in the viscosity which has been connected with well known time dependent viscosity of pure chitosan solution.The viscometry enabled monitoring of the extent of chitosan/surfactant association by establishing the viscosity decrease rate constant. The rate constant was derived from the first order constant of the quadratic polynomial curves used for the approximation of experimental values when these are presented in the form of viscosity-time profiles. This method showed the existence of critical surfactant concentration values (C ₁,C ₂ andC ₃). These values are closely connected with the proposed interaction model which is based on the assumption that spherical surfactant micelles are bound by chitosan molecule.On leave from Textile Engineering Dept., Faculty of Technology and Metallurgy, University of Belgrade, Yugoslavia     

Single‐Walled Carbon Nanotubes in Highly Viscous Media: A Comparison between the Dispersive Agents [BMIM][BF4], L121, and Triton X‐100

Dispersions of single‐walled carbon nanotubes (SWNTs) have been prepared by using the room‐temperature ionic liquid [BMIM][BF₄] (1‐butyl‐3‐methylimidazolium tetrafluoroborate), the triblock copolymer Pluronic L121 [poly(ethylene oxide)₅‐poly(propylene oxide)₆₈‐poly(ethylene oxide)₅] and the non‐ionic surfactant Triton X‐100 (TX100) in the pure state. The size of the SWNTs aggregates and the dispersion degree in the three viscous systems depend on the sonication time, as highlighted by UV/Vis/NIR spectroscopy and optical microscopy analysis. A nonlinear increase in conductivity can be observed as a function of the SWNTs loading, as suggested by electrochemical impedance spectroscopy. The generation of a three‐dimensional network of SWNTs showing a viscoelastic gel‐like behavior above a critical percolation concentration has been found at 25 °C in all the investigated systems by oscillatory rheology measurements.     

Determination of the Glass Electrode Parameters by Means of Potentiometric Titration of Acetic Acid in Aqueous Sodium or Potassium Chloride Solutions at 25°C

Single-ion activity coefficient equations are presented for the calculation of stoichiometric (molality scale) dissociation constants K _m for acetic acid in aqueous NaCl or KCl solutions at 25°C. These equations are of the Pitzer or Hückel type and apply to the case where the inert electrolyte alone determines the ionic strength of the acetic acid solution considered. K _m for a certain ionic strength can be calculated from the thermodynamic dissociation constant K _a by means of the equations for ionic activity coefficients. The data used in the estimation of the parameters for the activity coefficient equations were taken from the literature. In these data were included results of measurements on galvanic cells without a liquid junction (i.e., on cells of the Harned type). Despite the theoretical difficulties associated with the single-ion activity coefficients, K _m can be calculated for acetic acid in NaCl or KCl solutions by the Pitzer or Hückel method (the two methods give practically identical K _m values) almost within experimental error at least up to ionic strengths of about 1 mol-kg^–1. Potentiometric acetic acid titrations with base solutions (NaOH or KOH) were performed in a glass electrode cell at constant ionic strengths adjusted by NaCl or KCl. These titrations were analyzed by equation E = E _o + k(RT/F) ln[m(H⁺)], where m(H⁺) is the molality of protons, and E is the electromotive force measured. m(H⁺) was calculated for each titration point from the volume of the base solution added by using the stoichiometric dissociation constant K _m obtained by the Pitzer or Hückel method. During each base titration at a constant ionic strength, E _o and k in this equation were observed to be constants and were determined by linear regression analysis. The use of this equation in the analysis of potentiometric glass electrode data represents an improvement when compared to the common methods in use for two reasons. No activity coefficients are needed and problems associated with liquid junction potentials have been eliminated.     

Electrical conductivity study of the self-association of ionic surfactants in solution in ethyleneglycol,formic acid and formamide

The self-association of several cationic surfactants has been investigated by means of solubility and electrical conductivity measurements in ethyleneglycol, formic acid and formamide. Operational critical micelle concentrations (CMC_op) have been obtained from the vs. surfactant concentrationC plots by the usual interpolation procedure. It has been found that for the surfactant-solvent systems investigated the value of CMC_op increases with the extent of theC-range investigated. This result together with others concerning the effect of temperature and surfactant chain length reveal that the CMC_op-values have an ambiguous meaning concerning the surfactant self-association. Comparison of the vs.C plots for cetyltrimethylammonium chloride and tetramethylammonium chloride, for instance, reveals that some surfactant self-association takes place, probably leading to small, highly ionized surfactant aggregates, but the systems do not show true critical micelle concentration. Solubility measurements as a function of temperature lead to the same conclusion. The results are discussed according to our present understanding of the process of micellization and the necessity of using solvents of very high cohesive energy density in order to observe, with ionic surfactants, true CMCs corresponding to a highly cooperative association process. This appears to be the case only with water and hydrazine, not with formamide and other less cohesive solvents.     

A potentiometric titration study on the dissociation of bile acids related to the mode of interaction between different head groups of nonionic surfactants with free bile salts upon mixed micelle formation in water

By constructing an elaborate set of potentiometric titration together with data analysis system, apparent acid dissociation indices (pK _a ^app ) for two bile acids were determined in the mixed surfactant system of bile salts (Sodium Deoxycholate, NaDC, and Sodium Chenodeoxycholate, NaCDC) with nonionic surfactants (Hexaethyleneglycol monon-dodecylether, C₁₂E₆, Decanoyl-N-methylglucamide, MEGA-10) in aqueous solution at ionic strength 1.5 as a function of mole fraction in the surfactant mixture. It was found that with increasing the bile salt concentration, pK _a ^app as well as pH showed an abrupt rise at a certain concentration of the bile salt being regardable as a critical micellization concentration (CMC) and reached a constant value at the range sufficiently higher than CMC for each pure bile salt system, meaning that the dissociation degree of carboxyl group in micelle is smaller than that in bulk. In the mixed systems of free bile salts with nonionic surfactants, the dissociation state of carboxyl groups in mixed micelles depends on the species of hydrophilic group of nonionic surfactants as well as on mole fraction in the surfactant mixture.     

Energy transfer from C-phycocyanin to phthalocyanine metal complex in reverse micelles

A new mimic system of photosynthetic apparatus was constructed from C-phycocyanin and phthalocyanine zinc. C-PC was solubilized in the reverse micelles of non ionic surfactant Tween-80, cosurfactant pentanol, and solvent cyclohexane, in which the overall concentration of surfactant was 20% (w/v) and the mass ratio of Tween-80 to pentanol was 4:1. When the molar ratio of water to Tween-80 (R_w)≥9.0, the characteristic properties of C-PC were maintained. When it was excited, the energy transfer from C-PC to phthalocyanine zinc took place. The energy transfer efficiency was only related with the concentration of phthalocyanine, but not that of C-PC. Furthermore, the energy transfer was roughly in keeping with Perrin formulation, which indicated that the energy transfer took place approximately through dipole-dipole interaction in rigid system. The radii of the quenching sphere were calculated from the experimental results. For example, when the concentration of phthalocyanine zinc was 2.10 × 10~(-4) mol/     

The electronic structure of the B2H 5 + ion

The B₂H ₅ ⁺ ion has been studied using theab initio SCF method employing a basis set of Gaussian orbitals and various semi-empirical methods. The most stable structure appears to be a planar structure with two vacantp orbitals rather than a triply bridged structure suggested by analogy with acetylene with which it is isoelectronic. The semi-empirical results reinforce earlier conclusions that inclusion of charges from neighbouring atoms in iterative Extended Hückel methods is necessary to satisfactorily treat ionic molecules.

---

Zusammenfassung Das B₂H ₅ ⁺ -Ion ist mit Hilfe derab initio SCF-Methode unter Benutzung eines Basissatzes von Gaußorbitalen und mit verschiedenen semiempirischen Methoden untersucht worden. Die stabilste Struktur scheint eine planare Struktur mit zwei leerenp-Orbitalen und nicht eine dreifach verbrückte Struktur zu sein, wie sie durch Analogiebetrachtungen am Acetylen nahegelegt wird. Durch die semiempirischen Resultate werden die bereits früher erhaltenen Ergebnisse bestätigt, daß zur zufriedenstellenden Behandlung von Molekülionen mit iterativen erweiterten Hückel-Methoden die Berücksichtigung der Ladungen benachbarter Atome nötig ist.