Binding of sodium dodecyl sulfate to linear and star homopolymers of the nonionic poly(methoxyhexa(ethylene glycol) methacrylate) and the polycation poly(2-(dimethylamino)ethyl methacrylate): electromotive force, isothermal titration calorimetry, surface tension, and small-angle neutron scattering measurements

We investigated the binding of sodium dodecyl sulfate (SDS) to various linear and star polymers of the nonionic methoxyhexa(ethylene glycol) methacrylate (PMHEGMA) and the ionic 2-(dimethylamino)ethyl methacrylate (PDMAEMA), the latter being a polycation at low pH. The dodecyl sulfate ion selective electrode (EMF), isothermal titration calorimetry (ITC), and surface tension (ST) were applied to gain detailed information about interactions. In all cases there is evidence of significant binding of SDS over an extensive SDS concentration range spanning from ca. 10(-6) to 0.1 mol dm(-3). At pH 3, the polymer PDMAEMA is a strong polycation and here the binding is dominated by electrostatic 1:1 charge neutralization with the anionic surfactant. At their natural pH of 8.6, PMHEGMA and PDMAEMA polymers are essentially nonionic and bind SDS in the form of polymer-bound aggregates in the concentration range of ca. 1 x 10(-3) to 3 x 10(-2) mol dm(-3). All the polymers also bind SDS to a lesser extent at concentrations below 1 x 10(-3) mol dm(-3) reaching as low as 10(-7) mol dm(-3). This low concentration binding process involves the polymer and nonassociated SDS monomers. As far as we are aware, this is the first example that such a low concentration noncooperative binding process could be observed in SDS/neutral polymer systems by EMF and ST. We also showed that the nonionic surfactant hexa(ethylene glycol) mono-n-dodecyl ether (C12EO6) and the cationic cetyltrimethylammonium bromide (C16TAB) interact with star PDMAEMA. We believe that the interaction of C12EO6 and CTAB is of similar noncooperative type as the first SDS binding process in the range from ca. 10(-5) to 0.3 x 10(-3) mol dm(-3). At the high concentration binding limit Csat of SDS, the above polymers become fully saturated with bound SDS micelles. We applied small angle neutron scattering (SANS) to determine the structure and aggregation numbers of the star polymer/bound SDS micelles and calculated the stoichiometry of such supramolecular complexes. The SANS data on PDMAEMA star polymers in the presence of C12EO6 showed only a limited monomer binding in contrast to linear PDMAEMA, which showed monomer C12EO6 binding at low concentrations but micellar aggregates at 6 x 10(-3) mol dm(-3).     

DMABN在表面活性剂胶束水溶液中的荧光性质

研究了对二甲氨基苯甲腈(DMABN)在各种胶束水溶液中的荧光光谱性质, 发现不同胶束栅栏层区域的不同性质影响了探针的分子内扭转电荷转移(TICT)特性. 对离子型胶束, 头基电场是主要影响因素, 促进了DMABN分子TICT态的形成, 反离子解离度琢越大, 胶束溶液中的Ia/Ib越强. 在非离子表面活性剂胶束中, 聚氧乙烯链环外壳包裹的大量水使其氢键影响明显, 而很短的聚氧乙烯链还可能带来端基氢的氢键作用. 从DMABN的光物理特性看, 欲将胶束作为分散载体利用其TICT态特性, 选择反离子解离度较大的阴离子胶束(例如SDS或SDSO)较好.     

Competition between aggregation and hydrolysis in the reaction of arylperfluorooctanoates in micellar solutions

The rate of hydrolysis of phenyl and p-nitrophenyl perfluorooctanoate (2a and 2b) was measured in water and in the presence of different cationic (dodecyltrimethylammonium chloride, dodecyltrimethylammonium bromide, cetyltrimethylammonium bromide), anionic (sodium dodecyl sulfate (SDS) and perfluorooctanoate (PFO)) and neutral (Brij-35) surfactants. In water solution, the formation of phenol from 2a and p-nitro phenol from 2b takes place through two kinetic processes, both of which are much slower than the expected rate of hydrolysis for the monomeric compounds in water. The two kinetic processes are attributed to a coupling of the rates of hydrolysis and aggregation of the substrates. In the presence of charged surfactants at concentrations below the respective critical micellar concentration (cmc), two relaxation times are also observed. These are of the same order of magnitude as the substrates alone in the case of SDS, but faster for the cationic surfactants. At some concentration above the cmc, all the surfactants, except for PFO, showed a clean pseudo-first-order behavior attributed to the hydrolysis of the substrate incorporated into the micellar phase. In cationic micelles, the rates for 2a are slower and those for 2b are faster than the value expected for the monomer in water. The difference in behavior is attributed to the location of the substrates in the micellar phase and to the charge distribution in the transition state of the reactions. It is shown that the reactions in the micellar phase are catalyzed by the buffer PO4H(2-)/PO4H2(-). The reactions in SDS micelles are faster than those in water but slower than the estimated value for the monomer in water. The rate of the reactions in the presence of nonionic surfactant has values between those in cationic and anionic surfactants, that is, the rates are k(cationic) > k(nonionic) > k(anionic.) The behavior of 2a and 2b in water and in micellar solutions indicates that the substrates form aggregates in water at a rate that competes with the rate of hydrolysis.     

Soluble complexes of sodium poly(isoprene-b-methacrylate) micelles with cationic surfactants in aqueous media

Water-soluble complexes between sodium poly(isoprene-b-methacrylate) (NaIMA) amphiphilic block copolymer micelles and two cationic surfactants with different hydrophobic tail lengths, namely, dodecyltrimethylammonium bromide (DTMAB) and octyltrimethylammonium bromide (OTMAB), were prepared by mixing individual aqueous solutions of block copolymers and surfactants. The complexes were characterized in terms of size, overall charge, and micropolarity by dynamic light scattering, zeta-potential measurements, and fluorescence spectroscopy. Properties of the systems were investigated as a function of surfactant concentration and surfactant type and state in the initial solutions, as well as temperature. Experiments reveal surfactant complexation at the coronal sodium poly(methacrylate) (NaMA) chains, followed by an increase in mass and a decrease in size of the micelles. Complexation of individual surfactant micelles was observed when the DTMAB concentration in the starting solutions was higher than the surfactant cmc. The complexes show a temperature dependence of their dimension due to the hydrophobic effect.     

The Solubilization of Isophorone in Ionic Surfactant Solutions

Solubilization of isophorone was studied in an anionic and a cationic surfactant solution of SDS and BKC respectively. Solubility of isophorone increases with increase in the surfactant concentrations due to solubilization in micelles. FT NMR spectroscopy was used to understand the location and orientation of isophorone at the micellar interface.     

Trifluoperazine effects on anionic and zwitterionic micelles: a study by small angle X-ray scattering

In this work small angle X-ray scattering (SAXS) studies on the interaction of the phenothiazine trifluoperazine (TFP, 2-10 mM), a cationic drug, with micelles of the zwitterionic surfactant 3-(N-hexadecyl-N,N-dimethylammonium) propane sulfonate (HPS, 30 mM) and the anionic surfactant sodium dodecyl sulfate (SDS, 40 mM) at pH 4.0, 7.0, and 9.0 are reported. The data were analyzed through the modeling of the micellar form factor and interference function, as well as by means of the distance distribution function p(r). For anionic micelles (SDS), the results evidence a micellar shape transformation from prolate ellipsoid to cylinder accompanied by micellar growth and surface charge screening as the molar ratio TFP:SDS increases in the complex for all values of pH. Small ellipsoids with axial ratio nu=1.5+/-0.1 (long dimension of 60 A) grow and reassemble into cylinder-like aggregates upon 5 mM drug incorporation (1 TFP:8 SDS monomers) with a decrease of the micelle surface charge. At 10 mM TFP:40 mM SDS cylindrical micelles are totally screened with an axial ratio nu approximately 4 (long dimension approximately 140 A at pH 7.0 and 9.0). However, at pH 4.0, where the drug is partially diprotonated, 10 mM TFP incorporation gives rise to a huge increase in micellar size, resulting in micelles at least 400 A long, without altering the intramicellar core. For zwitterionic micelles (HPS), the results have shown that the aggregates also resemble small prolate ellipsoids with averaged axial ratio approximately nu=1.6+/-0.1. Under TFP addition, both the paraffinic radius and the micellar size show a slight decrease, giving evidence that the micellar hydrophobic core may be affected by phenothiazine incorporation rather than that observed for the SDS/TFP comicelle. Therefore, our results demonstrate that the axial ratio and shape evolution of the surfactant:TFP complex are both dependent on surfactant surface-charge and drug:surfactant molar ratio. The results are compared with those recently obtained for another phenothiazine drug, chlorpromazine (CPZ), in SDS and HPS micelles (Caetano, Gelamo, Tabak, and Itri, J. Colloid Interface Science 248 (2002) 149).     

Interaction between casein and sodium dodecyl sulfate

The interaction of the anionic surfactant sodium dodecyl sulfate (SDS) with 2.0 mg/ml casein was first investigated using isothermal titration calorimetry (ITC), dynamic light scattering (DLS), and fluorescence spectra. ITC results show that individual SDS molecules first bind to casein micelles by the hydrophobic interaction. The micelle-like SDS aggregate is formed on the casein chains when SDS concentration reaches the critical aggregation concentration (c1), which is far below the critical micellar concentration (cmc) of SDS in the absence of casein. With the further increase of SDS concentration to the saturate binding concentration c2, SDS molecules no longer bind to the casein chains, and free SDS micelles coexist with casein micelles bound with SDS aggregates in the system. DLS results show that the addition of SDS leads to an increase in the hydrodynamic radius of casein micelles with bound surfactant at SDS concentration higher than 4 mM, and also an increase in the casein monomer molecule (or submicelles) at SDS concentration higher than 10 mM. Fluorometric results suggest the addition of SDS leads to some changes in the binding process of hydrophobic probes to casein micelles.     

Micellar copolymerization of associative polymers: study of the effect of acrylamide on sodium dodecyl sulfate-poly(propylene oxide) methacrylate mixed micelles

Mixed micelles of sodium dodecyl sulfate (SDS) and poly(propylene oxide) methacrylate (PPOMA) have been studied in the presence of acrylamide using conductimetry, fluorescence spectroscopy, and small-angle neutron scattering (SANS) under the following conditions: (i) the SDS-acrylamide binary system in water; (ii) the SDS-acrylamide-PPOMA ternary system in water. The addition of acrylamide in SDS solutions perturbs the micellization of the surfactant by decreasing the aggregation number of the micelles and increasing their ionization degree. The variations of the various micellar parameters versus the weight ratio R=PPOMA/SDS are different in the presence of acrylamide or in pure water. These differences are much more pronounced for the lower than for the higher PPOMA concentrations. There is competition between acrylamide and PPOMA and at higher PPOMA concentration, acrylamide tends to be released from SDS micelles and is completely replaced by PPOMA.     

Characterization of layer-by-layer self-assembled multilayer films of diblock copolymer micelles

The in situ layer-by-layer (LbL) self-assembly of low Tg diblock copolymer micelles onto a flat silica substrate is reported. The copolymers used here were a cationic poly(2-(dimethylamino)ethyl methacrylate)-block-poly(2-(diethylamino)ethyl methacrylate) (50qPDMA-PDEA; 50q refers to a mean degree of quaternization of 50 mol % for the PDMA block) and zwitterionic poly(methacrylic acid)-block-poly(2-(diethylamino)ethyl methacrylate) (PMAA-PDEA), which has anionic character at pH 9. Alternate deposition of micelles formed by these two copolymers onto a silica substrate at pH 9 was examined. The in situ LbL buildup of the copolymer micelle films was monitored using zeta potential measurements, optical reflectometry, and a quartz crystal microbalance with dissipation monitoring (QCM-D). For a six layer deposition, complete charge reversal was observed after the addition of each layer. The OR data indicated clearly an increase in adsorbed mass with each additional micelle layer and suggest that some interdiffusion of copolymer chains between layers and/or an increase in the film roughness, and hence in the effective surface area of the micellar multilayers, must take place as the film is built up. QCM-D data indicated that the self-assembled micellar multilayers on a flat silica substrate undergo structural changes over a prolonged period. This is attributed to longer-term interdiffusion of the copolymer chains between the outer two layers after the initial adsorption of each layer is complete. The QCM-D data further suggest that the outer adsorbed layers adopt a progressively more extended conformation, particularly for the higher numbered layers. The morphology of each successive layer was characterized using in situ soft-contact atomic force microscopy, and micelle-like surface aggregates are clearly observed within each layer of the complex film, suggesting the persistence of aggregate structures throughout the multilayer structure.     

Study on osmotic pressure of non-ionic and ionic surfactant solutions in the micellar and microemulsion regions

To investigate the osmotic pressure of non-ionic and ionic surfactant solutions in the micellar and microemulsion regions, a potential of mean force including hard-core repulsion, van der Waals attraction and electric double layer repulsion is proposed to describe the interactions between micelles and between microemulsions. Both van der Waals attraction and electric double layer repulsion are represented using Yukawa tails. The explicit analytical expression of osmotic pressure derived from the first-order mean spherical approximation is implemented by accounting for the Donnan membrane effect. The proposed theory has been applied to micelle solutions of the non-ionic surfactant, n-dodecyl hexaoxyethylene monoether, the cationic surfactant, cetylpyridinium chloride, the anionic surfactant, sodium dodecyl sulfate, and spherical oil-in-water microemulsion system. Successful comparison is made between the proposed theory and the experimental osmotic pressure data for the studied surfactant solutions. Theoretical results show that the long-range electric double layer repulsion dramatically influences the osmotic pressure of both cationic and anionic surfactant solutions in the micellar region. The regressed model parameters such as effective micelle diameter, the mean aggregation number and effective micellar charge are in good agreement with those from static light scattering studies in the literature.     

SDS对SB3-12胶束表面电荷密度的调控作用及对药物增溶的影响

两性离子甜菜碱表面活性剂(SB3-12)胶束具有较好的生物相容性,由于相反电荷的极性头之间具有静电中和作用,胶束表面具有小的负电荷密度。当加入阴离子的十二烷基硫酸钠(SDS)以后,负离子SD-与SB3-12胶束极性区内层季铵正电荷的静电中和作用,能连续地调节胶束表面磺酸基的负电荷密度,这有利于对药物分子的选择性增溶和调节在生理条件下的药物的输送。等温滴定量热(ITC)研究发现SB3-12和SDS有强的协同效应,混合临界胶束浓度(CMC)和胶束化焓明显降低,并得到两者协同效应的弱静电作用机理。当模型药物分子芦丁(Rutin)与SB3-12/SDS混合胶束作用时,芦丁7位羟基的氢解离后的阴离子与SDS共同作用于SB3-12形成混合胶束。UV-Vis吸收光谱和~1H NMR谱研究发现,在SB3-12胶束中,芦丁分子的A环位于季铵阳离子附近,B环位于两个相反电荷之间的弱极性区域。在SDS胶束中,B环位于栅栏层,而A环和二糖暴露于水相侧。在混合胶束中,随着SDS摩尔分数增加,对A环的静电吸引变弱。离子表面活性剂对两性离子表面活性剂胶束表面电荷密度的调节作用,本质上是对胶束极性区域的物理及化学性质的微调,进而实现对药物的可控增溶。     

Interaction of polymer and surfactant at the air-water interface: poly(2-(dimethylamino)ethyl methacrylate) and sodium dodecyl sulfate

The interactions between the weak polyelectrolyte, poly(2-(dimethylamino) ethyl methacrylate) or PDMAEMA, and the anionic surfactant sodium dodecyl sulfate (SDS) at the air-water interface have been investigated at pH = 3 and 9 using a combination of neutron reflectivity and surface tension measurements. By using deuterated PDMAEMA in combination with h-SDS and d-SDS, we have been able to directly determine the distribution of both the polymer and the surfactant at the air-water interface. At pH = 3, the polyelectrolyte is positively charged while at pH = 9 it is essentially uncharged. The enhancement in the adsorption of SDS at low coverage suggests that surface active polymer surfactant complexes are forming and adsorbing at the interface. This leads to close to monolayer adsorption of SDS, suggesting that it is surfactant monomers that are complexing with polymers that are in extended conformations parallel to the surface. As the concentration of SDS in the mixtures changes so does the surfactant content of the complexes, which affects the surface activity and hence the coverage of the complexes. Multilayer structures are formed at SDS concentrations of 0.1 and 1 mM, for pH = 3 and 9, respectively.     

Mixed self-assembly of poly(ethylene oxide)-b-poly(epsilon-caprolactone) copolymers and sodium dodecyl sulfate in aqueous solution

Interaction of amphiphilic poly(ethylene oxide)-b-poly(epsilon-caprolactone) copolymers with anionic sodium dodecyl sulfate (SDS) has been investigated in aqueous solution. Formation of mixed micelles has been confirmed by surface tension measurements, whereas the influence of the surfactant on the copolymer self-assembling has been studied by measurement of the 1H NMR self-diffusion coefficients and by small-angle neutron scattering. As a rule, the surfactant decreases the heterogeneity of the micellar structures formed by the copolymer in water. Moreover, increasing the content of SDS results in the increasingly more important extension of the poly(ethylene oxide) (PEO) corona chains and the copolymer micelle deaggregation. The stability of the micelles against SDS increases with the length of the hydrophobic block. Preliminary two-dimensional NMR measurements with nuclear Overhauser enhancement have confirmed the spatial vicinity between SDS and the constitutive blocks of the copolymer.     

Clouding phenomenon and SANS studies on tetra-n-butylammonium dodecylsulfate micellar solutions in the absence and presence of salts

Clouding phenomenon in aqueous micellar solutions of an anionic surfactant tetra-n-butylammonium dodecylsulfate (TBADS) has been observed as a function of surfactant concentration. Small-angle neutron scattering (SANS) experiments in these systems show clustering of micelles as the temperature approaches the cloud point (CP). The individual micelles and the clusters of micelles coexist at CP. The clustering of micelles depends on the surfactant concentration and temperature. It is proposed that clustering is due to depletion of H-bonded water present around the butyl chains at the micellar surface. This is associated with entropy gain which is considered to be the major thermodynamic factor related to micellar aggregation. The structures (clusters) that emerge depend on the relative lengths of the alkyl chains of the counterion and can be tuned by the temperature.     

Interaction between the water soluble poly{1,4-phenylene-[9,9-bis(4-phenoxy butylsulfonate)]fluorene-2,7-diyl} copolymer and ionic surfactants followed by spectroscopic and conductivity measurements

The interaction has been studied in aqueous solutions between a negatively charged conjugated polyelectrolyte poly{1,4-phenylene-[9,9-bis(4-phenoxybutylsulfonate)]fluorene-2,7-diyl} copolymer (PBS-PFP) and several cationic tetraalkylammonium surfactants with different structures (alkyl chain length, counterion, or double alkyl chain), with tetramethylammonium cations and with the anionic surfactant sodium dodecyl sulfate (SDS) by electronic absorption and emission spectroscopy and by conductivity measurements. The results are compared with those previously obtained on the interaction of the same polymer with the nonionic surfactant C12E5. The nature of the electrostatic or hydrophobic polymer-surfactant interactions leads to very different behavior. The polymer induces the aggregation with the cationic surfactants at concentrations well below the critical micelle concentration, while this is inhibited with the anionic SDS, as demonstrated from conductivity measurements. The interaction with cationic surfactants only shows a small dependence on alkyl chain length or counterion and is suggested to be dominated by electrostatic interactions. In contrast to previous studies with the nonionic C12E5, both the cationic and the anionic surfactants quench the PBS-PFP emission intensity, leading also to a decrease in the polymer emission lifetime. However, the interaction with these cationic surfactants leads to the appearance of a new emission band (approximately 525 nm), which may be due to energy hopping to defect sites due to the increase of PBS-PFP interchain interaction favored by charge neutralization of the anionic polymer by cationic surfactant and by hydrophobic interactions involving the surfactant alkyl chains, since the same green band is not observed by adding either tetramethylammonium hydroxide or chloride. This effect suggests that the cationic surfactants are changing the nature of PBS-PFP aggregates. The nature of the polymer and surfactant interactions can, thus, be used to control the spectroscopic and conductivity properties of the polymer, which may have implications in its applications.     

Interaction of pyrimethamine and sulfadiazine with ionic and neutral micelles: Electronic absorption and fluorescence studies

The binding of two antitoxoplasmosis drugs, pyrimethamine (PYR) and sulfadiazine (SDZ) to cationic cetyltrimethylammonium chloride (CTAC), anionic sodium dodecylsulfate (SDS), zwiterionic N-hexadecyl-N,N-dimethyl-2-ammonium-1-propanesulfonate (HPS) and neutral polyoxyethylene-dodecyl-ether (Brij-35^®) micelles was studied using absorption and fluorescence spectroscopic methods. The pK_a of PYR changed in the presence of charged anionic, cationic and zwiterionic micelles, indicating that interaction is influenced by the micellar charge. For SDZ, pK_a changes were lower than 1 for all micelles, suggesting the occurrence of low binding constants in addition to a reasonable influence of the micellar charge. The values of binding constants K_b, obtained from fluorescence measurements, for PYR to CTAC micelles were very low at pH 4.0, where the drug is in a complete protonated state, increasing at pH 9.0 to long-chained CTAC and HPS micelles since this factor also favors accomodation of the neutral drug in the hydrophobic compartments. For SDZ the binding constants were determined from optical absorption measurements. Low binding constants were observed to charged surfactant micelles, with influence of micellar charge. It must be stated however that those values can be underestimated due to the relatively low sensitivity of the method based on absorption measurements.     

In-situ polymerization at the interfaces of micelles: a "grafting from" method to prepare micelles with mixed coronal chains

Herein we describe a new strategy for producing micelles with mixed coronal chains. This method involves attachment of an atom transfer radical polymerization (ATRP) initiator at the interface of a micelle and preparation of poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) brushes at the interface by a "grafting from" method. Poly(ethylene glycol)- block-polystyrene (PEG- b-PS) diblock copolymer was achieved by ATRP. After the sulfonation reaction PS blocks were partly sulfonated. In aqueous solution at low pH the sulfonated block copolymer self-assembled into micelles with PS cores and PEG coronae and sodium 4-styrenesulfonate groups were distributed at the interfaces of the micelles. An ATRP initiator consisting of a quaternary ammonium salt moiety and a 2-bromo-2-methyl propionate moiety was ion exchanged onto the interface of the micelle. ATRP of DMAEMA was initiated at the interface, and micelles with PEG/PDMAEMA mixed coronal chains were prepared by ATRP. The structures of the micelles were characterized by dynamic light scattering (DLS), transmission electron microscopy (TEM), and zeta potential measurements. The size and morphology of the micelles were controlled by pH in aqueous solution. At high pH, PDMAEMA brushes collapse, forming nanodomains on the surface of the micelles. PDMAEMA brushes in the coronae of the micelles could be used as a template for preparation of gold nanoparticles.     

Encapsulation of curcumin in cationic micelles suppresses alkaline hydrolysis

The alkaline hydrolysis of curcumin was studied in three types of micelles composed of the cationic surfactants cetyl trimethylammonium bromide (CTAB) and dodecyl trimethylammonium bromide (DTAB) and the anionic surfactant sodium dodecyl sulfate (SDS). At pH 13, curcumin undergoes rapid degradation by alkaline hydrolysis in the SDS micellar solution. In contrast, alkaline hydrolysis of curcumin is greatly suppressed in the presence of either CTAB or DTAB micelles, with a yield of suppression close to 90%. The results from fluorescence spectroscopic studies reveal that while curcumin remains encapsulated in CTAB and DTAB micelles at pH 13, curcumin is dissociated from the SDS micelles to the aqueous phase at this pH. The absence of encapsulation and stabilization in the SDS micellar solution results in rapid hydrolysis of curcumin.     

有机电解质在胶束催化聚苯乙烯氯甲基化反应中的作用

在实施聚苯乙烯氯甲基化反应的胶束催化体系中加入四丁基溴化铵 ((Bu)₄NBr, TBAB), 研究了有机电解质TBAB对胶束催化反应的影响规律. 实验结果表明, 在非离子表面活性剂NP-10及阴离子表面活性剂SDS的胶束催化体系中, TBAB的加入使聚苯乙烯氯甲基化反应的速率明显增大, 前者尤为突出；而在阳离子表面活性剂CTAB的胶束催化体系中, TBAB的加入几乎对反应速率无促进作用. 这种结果一方面归因于加入电解质TBAB会降低SDS的临界胶束浓度, 从而增强对聚苯乙烯四氯化碳溶液的增溶能力；更主要的原因是TBAB的丁基与表面活性剂碳氢链间的疏水相互作用会使季铵离子(Bu)₄N⁺嵌入SDS的胶束之中, 结合到NP-10的胶束表面, 使SDS胶束的阴离子头基对亲核取代反应(控制步骤)的禁阻作用得以减缓, 使NP-10的胶束表面携带了正电荷, 显著促进亲核取代反应的进行, 而对于CTAB的胶束, 由于静电排斥作用, 季铵离子(Bu)₄N⁺不能接近CTAB的胶束, 故TBAB的加入对聚苯乙烯氯甲基化反应不产生作用.     

The interaction of isomeric hexanediols with sodium dodecyl sulfate and dodecyltrimethylammonium bromide micelles

The micelle formation process for a typical anionic surfactant, sodium dodecyl sulfate, and a typical cationic surfactant, dodecyltrimethylammonium bromide, has been investigated in a series of mixed solvents consisting of different concentrations of isomeric hexanediols (1,2-hexanediol and 1,6-hexanediol) in water. The critical micelle concentrations and the degrees of counterion dissociation of the mixed micelles were obtained from conductance experiments. Luminescence probing experiments have been used to determine the concentration of micelles in solution and, hence, the micellar aggregation numbers of the surfactants in the mixed solvent systems. The alcohol aggregation numbers were determined by combining the partition coefficients (obtained using NMR paramagnetic relaxation enhancement experiments) with the micellar concentrations from the luminescence probing experiments. All these results are interpreted in terms of the difference in the interaction of the isomeric hexanediols with the surfactant as a function of the position of the hydroxyl groups on the six-carbon chain of the alcohol. Received: 28 June 2000/Accepted: 5 July 2000