Evaluation of quantum yields in the presence of an absorbing additive

A method is proposed for the evaluation of quantum yields of photochemical reactions studied in the presence of absorbing additives using cylindrical sample tubes.

---

.

     

Beckmann rearrangement of cyclohexanone oxime p-toluenesulfonate on acidic catalysts

The Beckmann rearrangement of cyclohexanone oxime p-toluenesulfonate has been studied using several catalysts. The reaction is catalyzed by weakly acidic sites and seems to occur by way of O-(p-toluenesulfonyl)--caprolactim.

---

- -, . - -(-)--.

     

Combination and disproportionation of methyl and 2-propyl radicals with 1,1,2-trimethylallyl radicals

The combinations and disproportionations of the CH₃ and 2-propyl (iP) radicals with the 1,1,2-trimethylallyl (TMA) radical have been studied in the gas phase in the temperature interval of 389–451 K and 490–540 K, respectively. For the ratios of the terminal (t) and non-terminal (n) combinations of the CH₃ and iP radicals with the TMA radical, values of 1.9±0.1 and 2.84±±0.10 were obtained, respectively. The ratios of the tt and tn and nn to tn combinations of the TMA radical were 1.59 and 0.46, respectively. The disproportionation-combination rations were (CH₃ , TMA)=0.022±±0.012 and (iP, TMA)=0.026±0.011.

---

CH ₃ 2- (iP) 1,1,2- (TMA) : 389–451 K 490–540 K. (t) (n) TMA 1,9±0,1 2,84±0,10, . tt tn nn tn TMA 1,59 0,46, . (CH ₃ , TMA)=0,022±0,012 (iP, TMA)=0,026±0,011.

     

Activity in CO oxidation of manganese dioxide for batteries

The low temperature oxidation of CO over MnO₂ containing samples for batteries has been investigated. It is found that the samples contain compositional and hydrate water and Mn⁴⁺, Mn³⁺, Mn²⁺ ions. The high efficiency is due to Mn⁴⁺ content.

---

CO MnO₂, . , Mn⁴⁺, Mn³⁺, Mn²⁺. Mn⁴⁺.

     

Toluene disproportionation and coke formation over fluorided alumina and hydrogen-mordenite

Toluene transformation was investigated on a fluorided alumina and a protonic mordenite under hydrogen (0.8, 12 bar) and under nitrogen (12 bar). Hydrogen pressure considerably improves the catalytic stability of H-mordenite by inhibiting the formation of coke. Moreover, hydrogen eliminates part of the coke deposited by reaction under nitrogen, and regenerates the activity of the mordenite. On the contrary, hydrogen has no effect in the case of fluorided alumina. The particular behavior of the mordenite is attributed to its very strong acidity.

---

(0,8, 12 ) (12 ). -, . , , , . , - . .

     

Phase equilibria in the FeVO4-Fe2(MoO4)3 system

Phase équilibria have been investigated in the FeVO₄-Fe₂(MoO₄)₃ system for the whole concentration range of the components. In this system there is one compound which melts incongruently: Fe₄V₂Mo₃O₂₀. The results are presented in the form of a phase diagram.

---

Zusammenfassung Phasengleichgewichte im System FeVO₄-Fe₂(MoO₄)₃ wurden über den ganzen Konzentrationsbereich der Komponenten hinweg untersucht. Eine Verbindung des Systems, Fe₄V₂Mo₃O₂₀, schmilzt inkongruent. Die Ergebnisse sind in Form eines Phasendiagramms angegeben.

---

FeVO₄-Fe₂(MoO₄)₃ . Fe₄V₂Mo₃O₂₀, . .

     

Etude thermoanalytique de quelques steroides I — Monovalerianate d'estradiol et estriol

A thermoanalytical study of estradiol monovalerate (a) and estriol (b) revealed the thermal stability, the decomposition kinetics, and the temperatures and intervals of fusion. The degree of purity was calculated only for estradiol monovalerate: 99.72 ± 0.11 mol %. The fusion enthalpy (29.45±0.47 kJ mol^–1) and entropy for this compound were evaluated by differential scanning calorimetry. It was also possible to detect the polymorphism and the pseudopolymorphism of (a) and (b) after recrystallization from several solvents.

---

Zusammenfassung Die thermische Stabilität, die Zersetzungskinetik sowie die Schmeiztemperaturen und -intervalle von Estradiol-Monovalerianat (a) und Estriol (b) wurden thermoanalytisch ermittelt. Nur der Reinheitsgrad von (a) wurde berechnet (99,72 ± 0,11 mol %). Die Schmelzenthalpie (29,45±0,47 kJ · mol^–1) und Schmelzentropie dieser Verbindung wurden mittels DSC bestimmt. Nach Rekristallisation in verschiedenen Lösungsmitteln konnten Polymorphie und Pseudopolymorphie für (a) und (b) nachgewiesen werden.

---

, . 99,72±0,11 %. (29,45±0,47 · ^–1) . , .

     

Recombination mechanism of hydrogen atoms on ZnS surface

It has been established that physically adsorbed and chemisorbed atoms take part in the recombination of H-atoms on ZnS surface.

---

- ZnS .

     

Preparation and characterization of Ru?Pb supported catalysts

Decomposition of Mn₃Mo₂TeO₁₂ during oxidation of toluene to benzaldehyde was observed. Depending on the surface composition of the initial catalyst, the decomposition leads to less active but highly selective MnMoTeO₆ or to MnMoO₄ which is not selective in toluene oxidation.

---

Mn₃Mo₂TeO₁₂ . , MnMoTeO₆, MnMoO₆.

     

Cyclohexanol conversion of Pt-and Co-promoted molybdena-alumina; Effect of S-uptake

The uptake of sulfur reduces the overall activity of PtMo/Al₂O₃ and enhances that of CoMo/Al₂O₃ in conversion of cyclohexanol. Significant changes in selectivity indicate the existence of different active sites of the initial catalyst for hydro-dehydrogenation and dehydration. The differences in catalytic activity expressed in terms of overall TOF decrease with increasing sulfur treatment like for Ru and Ir promoted catalysts.

---

PtMo/Al₂O₃ CoMo/Al₂O₃. - . Ru .

     

Oxidative elongation of lower paraffins

It is shown that the oxidative condensation of ethane on CoMo/-Al₂O₃ catalysts is in principle possible. The conceivable paths of this reaction are analyzed.

---

- .

     

IR investigation of phenol methylation on MgO

The adsorption of phenol, anisole, o-cresol and methanol on MgO was studied by infrared spectroscopy. The surface species of phenol, anisole and o-cresol were of the phenolate type and for methanol of the methoxide type.

---

, , - MgO . , - , — .

     

Catalytic reaction of methane with carbon dioxide

High activities and selectivities of Ni on SiO₂ catalysts producing CO in the reaction of CH₄ with CO₂, have been obtained at relatively low temperatures. These aspects are considerably different from the activities or selectivities of other catalysts, and have been explained by assuming that the Ni on SiO₂ catalyst markedly suppresses carbon deposition.

---

CO Ni SiO₂ CH₄ CO₂. , Ni SiO₂.

     

Polyfunctional zeolite catalysts in the benzene-olefin-hydrogen system

Benzene alkylation by C₂–C₄ olefins in the presence of hydrogen over a steam-treated zeolite catalyst containing lanthanum and nickel, has been studied. The promoting action of hydrogen on benzene alkylation by propylene has been established.

---

C₂–C₄ , . .

     

Temperature-programmed desorption (TPD) of various bases from HY zeolites

The temperature programmed desorption of several bases from a HY zeolite has shown that the activation energy of desorption represents a useful measure for characterizing the acidic properties.

---

- HY , , .

     

Décomposition thermique du sulfite de fer(II) anhydre

Résumé Sous azote ou sous vide, le sulfite ferreux anhydre se décompose vers 210° en magnétite, pyrite et dioxyde de soufre. Concurremment une réaction de dismutation intervient avec formation de FeSO₄, Fe₃O₄ et FeS₂. Lorsque la température atteint 320°, la pyrite et le sulfate réagissent ensemble pour donner Fe_1–xS, Fe₃O₄ et SO₂. Au-delà de 370° le sulfure ferreux non-stchiométrique commence à réagir à son tour avec le sulfate restant pour former de la magnetite et du dioxyde de soufre.

---

In nitrogen or under vacuum, anhydrous iron(II) sulfite decomposes near 210° to magnetite, pyrite and sulfur dioxide. A parallel disproportionation reaction occurs with formation of FeSO₄, Fe₃O₄ and FeS₂. When the temperature reaches 320°, pyrite and sulfate react together to give Fe_1–xS, Fe₃O₄ and SO₂. Above 370° the non-stoichiometric ferrous sulfide begins to react with the remaining sulfate to give magnetite and sulfur dioxide.

---

Zusammenfassung Unter Stickstoff oder im Vakuum zersetzt sich das wasserfreie Eisen(II)-sulfit in der Nähe von 210 °C zu Magnetit, Pyrit und Schwefeldioxid. Parallel hierzu findet eine Disproportionierung unter Bildung von FeSO₄, Fe₃O₄ und FeS₂ statt. Wenn die Temperatur 320 °C erreicht, reagieren Pyrit und Sulfat unter Bildung von Fe_1–xS, Fe₃O₄ und SO₂ Oberhalb von 370 °C beginnt das nichtstöchiometrische Eisensulfit seinerseits mit dem restlichen Sulfat zu reagieren um Magnetit und Schwefeldioxid zu ergeben.

---

(II) 210° , . FeSO₄, Fe₃O₄ FeS₂. 320°, , Fe_1–xS, Fe₃O₄ SO₂. 370° .

     

Kinetics of CO2 formation in thermal destruction of brown coals

The previously suggested approach to the problem of kinetic system identification /1/ was used for the system of independent first order reactions. The analysis of the curves of CO₂ formation in thermal destruction of brown coal indicates that both structure and model parameters of real processs can be identified in terms of the continuity concepts.

---

(I) ë . CO₂ , , .

     

Synthesis and thermostability of the binary condensed phosphates

Some condensed phosphates, especially cyclo-tetraphosphates have been synthetized as new binary compounds and their existence has been proved. The synthesis of cyclo-CdMgP₄O₁₂ is shown as an example. The products crystallize in the monoclinic system (C2c group) and are stable to 900°C. The synthesis is based on a thermal procedure making use of the reversible transformation of cyclo-tetraphosphates to higher linear phosphates (the 1.method) and on a calcination of the starting binary dihydrogenphosphate at quasi-isothermal-isobaric conditions (the 2.method).

---

Zusammenfassung Einige kondensierte Phosphate, im besonderen Zyklotetraphosphate wurden als neue binäre Verbindungen hergestellt. Als Beispiel wird Zyklo-Cd MgP₄ O₁₂ angeführt. Das Produkt kristallisiert monoklin /Gruppe C2/c/ und ist bis 900°C stabil. Die Synthese basiert auf einem thermischen Verfahren unter Anwendung des reversiblen Überganges von Zyklotetraphosphaten zu höhereren linearen Phosphaten /Verfahren 1/ und auf dem Kalzinieren der binären Ausgangsverbindung Dihydrogenphos phat bei quasi-isothermen-isobaren Bedingungen /Verfahren 2/.

---

$ , . - dMgP₄O_I2. $ / 2/ $ 900°. $ $ , — $ - .

     

Study of the combustion of a fire retardant coating by thermal analysis and different complementary techniques

An intumescent fire retardant coating can effectively control fire spread and damage. Its dual purpose is to confine the surface spread of flame to the boundaries of an already established fire, and to retard the penetration of heat and flame to and through the coated surface. Our composition expanded and provided an insulation layer between the flame source and the combustion substrate, and liberated a quantity of primarily non-flammable decomposition products which tended to extinguish the flame. The main ingredients of the coating were cellulose acetate butyrate and HMDI (Desmodur N) for Polyurethane, and Chlorowax-70 (chlorinated paraffins) as fire retardant component. This fire retardant coating was applied to wood panels, and tested in a 2-foot tunnel, its flame spread rating being measured. The effects of three parameters of interest were investigated: the type of wood used, the percentage of Chlorowax, and the coating thickness. It was found of interest to study the oxidation of the coating using different techniques, e.g. flash pyrolysis under oxygen and GC/MS for analysis of the decomposed products. Combustion studies of the coating were also conducted using DSC and thermogravimetry, either with the scanning mode or under isothermal conditions. Comparisons were made between the results obtained from pyrolysis and combustion.

---

Zusammenfassung Ein schwellender feuerhemmender Überzug kann Ausbreitung und Schäden von Feuer wirksam einschränken und wird zwei Zwecken gerecht: Verhinderung der Ausbreitung von ausgebrochenem Feuer und Schutz der überzogenen Oberfläche vor Hitze- und direkter Flammeneinwirkung. Die beschriebene Komposition quillt und bildet eine Isolationsschicht zwischen der Flammenquelle und dem brennbaren Material, liefert zugleich aber auch eine gewisse Menge von nichtbrennbaren, die Flamme erstickenden primären Zersetzungsprodukten. Die Hauptbestandteile des Überzugs sind Celluloseacetat und -butyrat und HMDI (Desmodur N) für Polyurethan sowie Chlorowax-70 (chlorierte Paraffine) als feuerhemmende Komponente. Dieser feuerhemmende Überzug wurde auf Holzplatten aufgebracht und in einem 2ft-Tunnel getestet, wobei die Flammenausbreitungsgeschwindigkeit gemessen wurde. Der Einfluß von drei interessierenden Parametern wurde untersucht: Typ des benutzten Holzes, Anteil von Chlorowax und Überzugsschichtdicke. Es erwies sich als interessant, die Oxydation des Überzugmaterials mit verschiedenen Techniken zu untersuchen, z.B. durch Schnellpyrolyse und Analyse der Zersetzungsprodukte mittels GC/MS. Verbrennungsuntersuchungen des Überzugmaterials wurden auch mittels DSC und Thermogravimetrie entweder nach der scanning-Arbeitsweise oder unter isothermen Bedingungen ausgeführt. Die bei Pyrolyse und Verbrennung erhaltenen Ergebnisse werden miteinander verglichen.

---

. -, , — . , . - ( ) ( ) . , . : , . , , , - . . , .