Why is the antipodal effect in closo-1-SB9H9 so large? A possible explanation based on the geometry from the concerted use of gas electron diffraction and computational methods

The molecular structure of 1-thia-closo-decaborane(9), 1-SB(9)H(9), has been determined by the concerted use of gas electron diffraction and quantum-chemical calculations. Assuming C(4v) symmetry, the cage structure was distorted from a symmetrically bicapped square antiprism (D(4d) symmetry) mainly through substantial expansion of the tetragonal belt of boron atoms adjacent to sulfur. The S-B and (B-B)(mean) distances are well determined with r(h1) = 193.86(14) and 182.14(8) pm, respectively. Geometrical parameters calculated using the MP2(full)/6-311++G** method and at levels reported earlier [MP2(full)/6-311G**, B3LYP/6-311G** and B3LYP/cc-pVQZ], as well as calculated vibrational amplitudes and (11)B NMR chemical shifts, are in good agreement with the experimental findings. In particular, the so-called antipodal chemical shift of apical B(10) (71.8 ppm) is reproduced well by the GIAO-MP2 calculations and its large magnitude is schematically accounted for, as is the analogous antipodal chemical shift of B(12) in the twelve-vertex closo-1-SB(11)H(11).     

Accurate equilibrium structures obtained from gas-phase electron diffraction data: sodium chloride

A novel method has been developed to allow the accurate determination of equilibrium gas-phase structures from experimental data, thus allowing direct comparison with theory. This new method is illustrated through the example of sodium chloride vapor at 943 K. Using this approach the equilibrium structures of the monomer (NaCl) and the dimer (Na(2)Cl(2)), together with the fraction of vapor existing as dimer, have been determined by gas-phase electron diffraction supplemented with data from microwave spectroscopy and ab initio calculations. Root-mean-square amplitudes of vibration (u) and distance corrections (r(a) - r(e)) have been calculated explicitly from the ab initio potential-energy surfaces corresponding to the vibrational modes of the monomer and dimer. These u and (r(a) - r(e)) values essentially include all of the effects associated with large-amplitude modes of vibration and anharmonicity; using them we have been able to relate the ra distances from a gas-phase electron diffraction experiment directly to the re distances from ab initio calculations. Vibrational amplitudes and distance corrections are compared with those obtained by previous methods using both purely harmonic force fields and those including cubic anharmonic contributions, and the differences are discussed. The gas-phase equilibrium structural parameters are r(e)(Na-Cl)(monomer) = 236.0794(4) pm; r(e)(Na-Cl)(dimer) = 253.4(9) pm; and <(e)ClNaCl = 102.7(11) degrees. These results are found to be in good agreement with high-level ab initio calculations and are substantially more precise than those obtained in previous structural studies.     

Highly asymmetric coordination in alkenes: gas-phase structures of trans-1,2-dichloro-1,2-disilylethene and 1-bromo-1-silylethene

The molecular structures of trans-1,2-dichloro-1,2-disilylethene and 1-bromo-1-silylethene have been determined by gas-phase electron diffraction (GED) and ab initio molecular orbital calculations (MP2/6-311G). Both compounds were found to have highly asymmetric coordination around the carbon atoms with [ab initio (r(e))/GED (r(a))] C=C-Cl [117.0/117.0(2) degrees] and C=C-Si [126.2/128.1(1) degrees] in the C(2)(h) structure of trans-1,2-dichloro-1,2-disilylethene and C=C-Br [119.2/120.7(4) degrees] and C=C-Si [125.0/125.0(4) degrees] in the C(s) structure of 1-bromo-1-silylethene. Other important structural parameters for trans-1,2-dichloro-1,2-disilylethene are C=C [135.2/134.5(3) pm], C-Si [189.4/187.9(2) pm], and C-Cl [175.1/174.9(1) pm], and C=C [134.2/133.4(2) pm], C-Si [187.8/187.2(3) pm], and C-Br [191.3/191.0(3) pm] for 1-bromo-1-silylethene. Further ab initio calculations were carried out on CH(2)CRX and trans-(CRX)(2) (R = SiH(3), CH(3), or H; X = H, F, Cl, or Br) to gauge the effects of electron-withdrawing and electron-donating groups on the structures. They reveal some even more distorted structures. The asymmetric appearance of these molecules can largely be accounted for by valence shell electron pair repulsion theory.     

An enormous vibrational motion: the gas-phase structure of dimethyl-bis(methoxyethynyl) germanium

The structure of dimethyl-bis(methoxyethynyl) germanium has been determined in the gas phase by electron diffraction utilising flexible restraints from quantum chemical calculations. Theoretical methods (B3LYP/6-311+G* and MP2/6-311+G*) predict a low barrier to rotation of the methoxy groups in the molecule in addition to low-frequency vibrations of the long ethynyl chains. In the equilibrium structure the Ge-C[triple bond]C angles of the two methoxyethynyl fragments in the molecule are computed to deviate by up to 4 degrees from the linear arrangement. As a consequence of low-frequency large-amplitude vibrational motion the experimental structure of these fragments without applying vibrational corrections deviates considerably from linearity, while the structure corrected for vibrational effects using the harmonic approximation and taking into account a non-linear transformation between internal and Cartesian coordinates (r(h1)) shows closer agreement with theory. The main experimental structural parameters of dimethyl-bis(methoxyethynyl) germanium (r(h1)) are: r(Ge-C)(mean), 192.5(1) pm; DeltaGeC =r(Ge-C(methyl))-r(Ge-C(ethynyl)), 4.5(5) pm, r(C[triple bond]C)(mean), 122.8(2) pm; r(C-O)(mean), 138.9(3) pm; DeltaCO =r(C(methyl)-O)-r(C(ethynyl)-O), 14.5(2) pm, r(C-H)(mean), 109.1(4) pm; [angle](X-C-H)(mean)(X = Ge,O), 109(1) degree; [angle]C(ethynyl)-Ge-C(ethynyl), 108.1(4) degree; [angle]C(methyl)-Ge-C(methyl), 113.4(5) degree; [angle]Ge-C[triple bond]C, 163(1) degree; [angle]C[triple bond]C-O, 176(2) degree; [angle]C-O-C, 115.2(6) degree; methoxy group torsion, tau, 36(9) degree from the position in which the C-O bond eclipses the further Ge-C(ethynyl) bond.     

Boron 1s photoelectron spectrum of 11BF3: vibrational structure and linewidth

The boron 1s photoelectron spectrum of (11)BF(3) has been measured at a photon energy of 400 eV and a resolution of about 55 meV. The pronounced vibrational structure seen in the spectrum has been analyzed to give the harmonic and anharmonic vibrational frequencies of the symmetric stretching mode, 128.1 and 0.15 meV, as well as the change in equilibrium BF bond length upon ionization, -5.83 pm. A similar change in bond length has been observed for PF(3) and SiF(4), but a much smaller change for CF(4). Theoretical calculations for BF(3) that include the effects of electron correlation give results that are in reasonable accord with the experimental values. The Lorentzian (lifetime) width of the boron 1s core hole in BF(3) is found to be 72 meV, comparable to the value of 77 meV that has been reported for CF(4).     

Structure of 1-Thia-closo-dodecaborane(11), 1-SB11H11, as determined by microwave spectroscopy complemented by quantum chemical calculations

The microwave spectrum of 1-thia-closo-dodecaborane(11), 1-SB(11)H(11), has been investigated in the 23-62 GHz spectral region. The molecule is found to have C(5v) symmetry. The spectra of several isotopomers have been assigned and a precise substitution structure of the non-hydrogen atoms has been determined. The structure is in quite good agreement with the one determined previously by electron diffraction. Density functional theory calculations at the B3LYP/cc-pVTZ level were found to predict a structure that is in good agreement with the substitution structure.     

Molecular structures of arachno-heteroboranes with decaborane frameworks: two Cs-symmetrical azacarba- and carbathiaboranes

The gas-phase structure of 6,9-CSB8H12 has been determined by electron diffraction and ab initio calculations, and that of 6,9-CNB8H13 has also been calculated. The accuracy of each structure has been confirmed by 11B NMR calculations. The position of the sulfur atom is very close to that of the boron atom occupying the equivalent position in the parent molecule [B10H14](2-), reflecting the similarity of sizes of sulfur and boron atoms. The nitrogen and carbon atoms, on the other hand, lie much closer to the centers of the cages. The B8-X9-B10 angles increase from 98.7 degrees for X = S to 122.8 degrees for X = N. There are also large changes in relative lengths of bonds, with some bonds lengthening by up to 14.6 pm on introduction of a sulfur atom.     

Accurate determination of the structure of cyclooctatetraene by femtosecond rotational coherence spectroscopy and ab initio calculations

We combine femtosecond time-resolved rotational coherence spectroscopy with high-level ab initio theory to obtain accurate structural information for the nonpolar antiaromatic molecule 1,3,5,7-cyclooctatetraene (C8H8, COT) and its perdeuterated isotopomer COT-d8 (C8D8). We measure the rotational B0 and centrifugal distortion constants D(J), D(JK) of the v = 0 states of COT and COT-d8 to high accuracy, e.g. B0 (COT) = 2710.329(56) MHz, as well as B(v) for the v = 1 states nu6, nu11, nu17, nu22, and nu41/nu42 of COT. The experimental rotational constants are compared to those obtained from calculations at the coupled-cluster with single, double, and perturbative triples [CCSD(T)] level. The latter also take into account vibrational averaging effects of the ground and vibrationally excited states. Combining the experimental and calculated rotational constants with the calculated equilibrium bond lengths and angles allows us to determine accurate equilibrium structure parameters, e.g., r(e) (C-C) = 147.0 +/- 0.05 pm, r(e) (C=C) = 133.7 +/- 0.1 pm, and r(e) (C-H) = 107.9 +/- 0.1 pm. The equilibrium C-C and C=C bond lengths of COT are compared to those of 1,3-butadiene. The expected effect of decreased pi-electron delocalization due to the twisting of adjacent C=C double bonds in COT relative to butadiene is observed for the C-C bonds but not for the C=C bonds.     

Molecular structures of two metal tetrakis(tetrahydroborates), Zr(BH4)(4) and U(BH4)(4): equilibrium conformations and barriers to internal rotation of the triply bridging BH4 groups

The molecular structures of Zr[(mu-H)(3)BH](4) and U[(mu-H)(3)BH](4) have been investigated by density functional theory (DFT) calculations and gas electron diffraction (GED). The triply bridged bonding mode of the tetrahydroborate groups in the former is confirmed, but both DFT calculations and GED structure refinements indicate that the BH(4) groups are rotated some 12 degrees away from the orientation in which the three bridging B-H bonds are staggered with respect to the opposing ZrB(3) fragment. As a result the symmetry of the equilibrium conformation is reduced from T(d) to T. Bond distances and valence angles are as follows (DFT/GED): Zr-B = 232.2/232.4(5) pm; Zr-H(b) = 214.8/214.4(6) pm; B-H(b) = 125.3/127.8(8) pm; B-H(t) = 119.4/118.8(17) pm; angle ZrBH(b) = 66.2/65.6(3) degrees; the smallest dihedral angle of type tau(BZrBH(b)) = 48/45(2) degrees. DFT calculations on Hf(BH(4))(4) indicate that the structure of this molecule is very similar to that of the Zr analogue. Matrix-isolation IR spectroscopy and DFT calculations on U(BH(4))(4) show that while the polymeric solid-state structure is characterized by terminal triply bridging and metal-metal bridging bidentate BH(4) groups, all BH(4) groups are triply bridging in the gaseous monomer. Calculations with one of the two nonbonding 5f electrons on U occupying an a(1) and the other distributed equally among the three t(2) orbitals indicate that the equilibrium conformation has T(d) symmetry, i.e. that the three B-H(b) bonds of each tetrahydroborate group are exactly staggered with respect to the opposing UB(3) fragment with tau(BUBH(b)) = 60 degrees. Calculations including spin-orbit interactions indicate that Jahn-Teller distortions from T(d) symmetry are either absent or very small. The best agreement between observed and calculated GED intensity data was obtained for a model of T(d) symmetry, but models of T symmetry with dihedral angles tau(BUBH(b)) > 42 degrees cannot be ruled out. Bond distances and valence angles are as follows (DFT/GED): U-B = 248.8/251.2(4) pm; U-H(b) = 227.7/231.5(6) pm; B-H(b) = 126.0/131.6(5) pm, B-H(t) = 119.5/117.8(11) pm; angle UBH(b) = 65.6/63.1(3) degrees. It is suggested that the different equilibrium conformations of the three molecules are determined primarily by repulsion between bridging H atoms in different tetrahydroborate groups.     

Molecular structure and conformational composition of 1,3-dihydroxyacetone studied by combined analysis of gas-phase electron diffraction data, rotational constants, and results of theoretical calculations. Ideal gas thermodynamic properties of 1,3-dihydroxyacetone

The molecular structure of 1,3-dihydroxyacetone (DHA) has been studied by gas-phase electron diffraction (GED), combined analysis of GED and microwave (MW) data, ab initio, and density functional theory calculations. The equilibrium re structure of DHA was determined by a joint analysis of the GED data and rotational constants taken from the literature. The anharmonic vibrational corrections to the internuclear distances (re-ra) and to the rotational constants (B(i)e-B(i)0) needed for the estimation of the re structure were calculated from the B3LYP/cc-pVTZ cubic force field. It was found that the experimental data are well reproduced by assuming that DHA consists of a mixture of three conformers. The most stable conformer of C2v symmetry has two hydrogen bonds, whereas the next two lowest energy conformers (Cs and C1 symmetry) have one hydrogen bond and their abundance is about 30% in total. A combined analysis of GED and MW data led to the following equilibrium structural parameters (re) of the most abundant conformer of DHA (the uncertainties in parentheses are 3 times the standard deviations): r(C=O)=1.215(2) A, r(C-C)=1.516(2) A, r(C-O)=1.393(2) A, r(C-H)=1.096(4) A, r(O-H)=0.967(4) A, angleC-C=O=119.9(2) degrees, angleC-C-O=111.0(2) degrees, angleC-C-H=108.2(7) degrees, angleC-O-H=106.5(7) degrees. These structural parameters reproduce the experimental B(i)0 values within 0.05 MHz. The experimental structural parameters are in good agreement with those obtained from theoretical calculations. Ideal gas thermodynamic functions (S degrees (T), C degrees p(T), and H degrees (T)-H degrees (0)) of DHA were calculated on the basis of experimental and theoretical molecular parameters obtained in this work. The enthalpy of formation of DHA, -523+/-4 kJ/mol, was calculated by the atomization procedure using the G3X method.     

Zr(11)Sb(18): a new binary antimonide exhibiting an unusual Sb atom network with nonclassical Sb-Sb bonding

The herewith-introduced antimonides Zr(11)Sb(18) and Zr(10.4)V(0.6)Sb(18) were prepared by high-temperature techniques; both arc-melting and solid-state reactions at 1200 degrees C starting from alpha-ZrSb(2) and the metals Zr and V in powder form are possible methods. These isostructural compounds represent an unprecedented metal:antimony ratio of 11:18 and form a new structure type. Zr(11)Sb(18) crystallizes in the tetragonal space group I(-)42d, with the lattice dimensions a = 676.94(4) pm and c = 6007.3(5) pm, while the V-containing phase forms a slightly smaller unit cell with a = 676.48(8) pm and c = 6005.6(9) pm (Z = 4). Their structures are comprised of an Sb atom substructure with several intermediate Sb-Sb bonds starting at 311 pm, which is reminiscent of that found in the series (Ti,M)(5)Sb(8) (M = Zr, Hf, Nb, Mo) published last year. Interwoven with this network is the Zr atom network, which forms a diamond-like metal atom substructure with long Zr-Zr contacts of ca. 360 pm. Band structure calculations based on the linear muffin tin orbital approach reveal these antimonides to be mainly stabilized by strong M-Sb and intermediate Sb-Sb bonds, and additionally--to the smallest extent--by M-M bonds (M = Zr, V). In agreement with the electronic structure calculations, Zr(11)Sb(18) is metallic with a small positive Seebeck coefficient.     

Vibrational spectra and gas phase structure of N-cyanoimidosulfurous difluoride, NCN=SF2

The vibrational spectra, IR (gas) and Raman (liquid) of N-cyanoimidosulfurous difluoride, NCN=SF2, were recorded, and the molecular structure was determined by gas electron diffraction. The spectra were assigned by comparing the vibrational frequencies with those in related molecules and with calculated (HF, MP2, B3LYP with 6-31G(d) basis sets) values, and a normal coordinate analysis was performed. The molecule possesses a syn conformation (Ctriple bondN syn with respect to the bisector of the SF2 angle). This has been rationalized by orbital interactions of the electron lone pairs of sulfur and nitrogen with the N-C and S-F bonds, respectively, which are antiperiplanar or anticlinal to these lone pairs (anomeric effects). Quantum chemical calculations with the B3LYP and MP2 methods reproduce the experimental structure reasonably well if large basis sets (6-311G(2d,f)) are used.     

Comparison of the experimental, semi-experimental and ab initio equilibrium structures of acetylene: influence of relativisitic effects and of the diagonal Born-Oppenheimer corrections

The equilibrium structure of acetylene (also named ethyne) has been reinvestigated to resolve the small discrepancies noted between different determinations. The size of the system as well as the large amount of available experimental data provides the quite unique opportunity to check the magnitude and relevance of various contributions to equilibrium structure as well as to verify the accuracy of experimental results. With respect to pure theoretical investigation, quantum-chemical calculations at the coupled-cluster level have been employed together with extrapolation to the basis set limit, consideration of higher excitations in the cluster operator, inclusion of core correlation effects as well as relativistic and diagonal Born-Oppenheimer corrections. In particular, it is found that the extrapolation to the complete basis set limit, the inclusion of higher excitations in the electronic-correlation treatment and the relativistic corrections are of the same order of magnitude. It also appears that a basis set as large as a core-valence quintuple-zeta set is required for accurately accounting for the inner-shell correlation contribution. From a pure experimental point of view, the equilibrium structure has been determined using very accurate rotational constants recently obtained by a "global analysis" (that is to say that all non-negligible interactions are explicitly included in the Hamiltonian matrix) of rovibrational spectra. Finally, a semi-experimental equilibrium structure (where the equilibrium rotational constants are obtained from the experimental ground state rotational constants and computed rovibrational corrections) has been obtained from the available experimental ground-state rotational constants for ten isotopic species corrected for computed vibrational corrections. Such a determination led to the revision of the ground-state rotational constants of two isotopologues, thus showing that structural determination is a good method to identify errors in experimental rotational constants. The three structures are found in a very good agreement, and our recommended values are r(CC) = 120.2958(7) pm and r(CH) = 106.164(1) pm.     

Preparation and crystal structure of barium caesium undecaphosphide-ammonia (1/11) BaCsP11 · 11 NH3

The new compound BaCsP₁₁ · 11 NH₃ was prepared in liquid ammonia, using Cs₃P₁₁ and a cation exchange resin loaded with Ba²⁺ cations as starting materials. BaCsP₁₁ · 11 NH₃ forms yellow crystals which decompose at 246 K under loss of the ammonia of crystallisation. The crystal structure was determined from single-crystal X-ray diffractometer data: P2₁/a, a = 1599.9(2) pm, b = 1793.9(3) pm, c = 1998.1(7) pm, β = 93.02(4)°, Z = 8, wR₂ = 0.118 (R₁ = 0.047) for 8969 structure factors and 631 variable parameters. The Cs⁺ cations are co-ordinated by undecaphosphatrishomocubane anions P₁₁^3? in such a way that one-dimensionally infinite chains [CsP₁₁]^2? result which are separated by Ba(NH₃)_n²⁺ (n = 8 and 9). Only one Ba? P contact is observed.     

Ba4Si3Br2: a double salt of barium bromide and barium silicide containing a novel cyclotrisilicide unit

A new compound of the composition Ba4Si3Br2 was obtained by reacting BaSi with a melt of BaBr2. Ba4Si3Br2 may be described as a double salt between a Zintl phase and a halide. The structure was determined by single-crystal X-ray diffraction (P21c, a= 1504.1(2), b = 884.5(1), c = 880.2(1) pm, beta = 101.93(2) degrees, R = 0.041 Rw = 0.079). The crystal structure contains isolated barium cations and bromide anions as well as novel singly bonded cyclotrisilicid units. The electronic structure has been studied by linear Muffin tin orbital (LMTO) band structure calculations, which reveal semiconducting behavior with a band gap of about 0.1 eV, and by an analysis of the electron localization function.     

Gas-phase electron diffraction studies on two 11-vertex Dicarbaboranes, closo-2,3-C2B9H11 and nido-2,9-C2B9H13

The molecular structures of two carbaboranes, closo-2,3-C(2)B(9)H(11) and nido-2,9-C(2)B(9)H(13), were determined experimentally for the first time using gas-phase electron diffraction (GED). For closo-2,3-C(2)B(9)H(11), a model with C(2)(v)() symmetry was refined to give C-B bond distances ranging 158.3-167.0 pm and B-B distances ranging 177.4-200.0 pm. The structure of nido-2,9-C(2)B(9)H(13) was refined using a model with C(s)() symmetry to give C-B bond lengths ranging 160.3-171.9 pm and B-B lengths ranging 173.0-196.1 pm. Ab initio computations (up to MP2/6-311+G) were also carried out on these and the related nido-7,8-C(2)B(9)H(13), which was not sufficiently stable to allow determination of its molecular structure by GED.     

Molecular structure of phthalocyaninatotin(II) studied by gas-phase electron diffraction and high-level quantum chemical calculations

The molecular structure of phthalocyaninatotin(II), Sn(II)Pc, is determined by density functional theory (DFT/B3LYP) calculations using various basis sets and gas-phase electron diffraction (GED). The quantum chemical calculations show that Sn(II)Pc has C4V symmetry, and this symmetry is consistent with the structure obtained by GED at 427 degrees C. GED locates the Sn atom at h(Sn) ) 112.8(48) pm above the plane defined by the four isoindole N atoms, and a N-Sn bond length of 226.0(10) pm is obtained. Calculation at the B3LYP/ccpVTZ/cc-pVTZ-PP(Sn) level of theory gives h(Sn) ) 114.2 pm and a N-Sn bond length of 229.4 pm. The phthalocyanine (Pc) macrocycle has a slightly nonplanar structure. Generally, the GED results are in good agreement with the X-ray structures and with the computed structure; however, the comparability between these three methods has been questioned. The N-Sn bond lengths determined by GED and X-ray are significantly shorter than those from the B3LYP predictions. Similar trends have been found for C-Sn bonds for conjugated organometallic tin compounds. Computed vibrational frequencies give five low frequencies in the range of 18-54 cm-1, which indicates a flexible molecule.     

Binäre Lanthan‐Stannide mit Sn:La‐Verhältnissen nahe 1:1 – Synthesen,Kristallstrukturen, Chemische Bindung

Four binary lanthanum stannides close to the 1:1 ratio of Sn:La were synthesized from mixtures of the elements. The structures of the compounds have been determined by means of single‐crystal X‐ray data. The low temperature (α) form of LaSn (CrB‐type, orthorhombic, space group Cmcm, a = 476.33(6), b = 1191.1(2), c = 440.89(6) pm, Z = 4, R1 = 0.0247), crystallizes with the CrB‐type. The structure exhibits planar tin zigzag chains with a Sn–Sn bond length of 299.1 pm. In contrast to the electron precise Zintl compounds of the alkaline earth elements, additional La–Sn bonding contributions become apparent from the results of band structure calculations. In the somewhat tin‐richer region, the new compound La₃Sn₄ (orthorhombic, space group Cmcm, a = 451.45(4), b = 1190.44(9), c = 1583.8(2) pm, Z = 4, R1 = 0.0674), crystallizing with the Er₃Ge₄ structure type, exhibits Sn₃ segments of the zigzag chains of α‐LaSn together with a further Sn atom in a square planar Sn coordination with increased Sn–Sn bond lengths. In the Lanthanum‐richer region, La₁₁Sn₁₀ (tetragonal, space group I4/mmm, a = 1208.98(5), c = 1816.60(9) pm, Z = 4, R1 = 0.0325) forms the undistorted tetragonal Ho₁₁Ge₁₀ structure type. Its structure, which contains isolated Sn atoms, [Sn₂] dumbbells and planar [Sn₄] rings is related to the high temperature (β) form of LaSn. The structure of β‐LaSn (space group Cmmm, a = 1766.97(6), b = 1768.28(5), c = 1194.32(3) pm, Z = 60, R1 = 0.0453), which forms a singular structure type, can be derived from that of La₁₁Sn₁₀ by the removal of thin slabs. Due to the different stacking of the remaining layers, planar [Sn₄] chain segments and linear [Sn–Sn–Sn] anions are formed as additional structural elements. The chemical bonding (Sn–Sn covalent bonding, Sn–La contributions) is discussed on the basis of the simple Zintl concept and the results of FP‐LAPW calculations (density of states, band structure, valence electron densities and electron localization function).     

Conformations of silicon-containing rings. 5. Conformational properties of 1-methyl-1-silacyclohexane: gas electron diffraction,low-temperature NMR,and quantum chemical calculations

The molecular structure of 1-methyl-1-silacyclohexane 3 has been determined by gas electron diffraction (GED). The conformational preference of the methyl group was studied experimentally in the gas phase (GED) and in solution (low-temperature (13)C NMR) and by quantum chemical calculations (HF, MP2, and B3LYP with 6-31G basis sets and mPW1PW91/6-311G(2df,p)). Both experimental methods result in a preference of the equatorial position of the methyl group, 68(7)% in the gas phase at 298 K and 74(1)% in solution at 110 K. The calculations predict 68-73% equatorial conformer at room temperature. From coalescence temperatures, Gibbs free energies of activation for ring inversion DeltaG++ (eq --> ax) = 5.81(18) and DeltaG++ (ax --> eq) = 5.56(18) kcal mol(-1) were derived. The calculated values for DeltaG++ (eq --> ax) are 5.92 (B3LYP) and 5.84 kcal mol(-1) (mPW1PW91).     

Molecular structures of free quinuclidine and its adducts with metal trihydrides, MH3 (M=B, Al or Ga), studied by gas-phase electron diffraction, X-ray diffraction and quantum chemical calculations

The structure of quinuclidine, HC(CH(2)CH(2))(3)N, has been re-investigated by quantum chemical calculations and by gas-phase electron diffraction (GED). The GED data, together with published rotational constants, have been analysed using the SARACEN method to determine the most reliable structure (r(h1)) for the gaseous molecule. The structures of two adducts of quinuclidine with group 13 trihydride molecules, MH(3) (M=B, Al), have also been determined by GED and quantum chemical calculations. The effect of the coordination of these hydrides to the quinuclidine nitrogen atom has been investigated, and the structural changes and energetics of adduct formation are discussed. We also present the crystal structure of quinuclidine borane.