一种两亲生物降解高分子-聚丙交酯-聚乙二醇嵌段共聚物的研究进展

PLA-PEG良好的生物相容和降解性能在生物医学领域受到了广泛关注，对其性能和应用已经有了深入的研究。就PLA-PEG这一类两亲生物降解高分子的合成、性能作一简介，并对其在组织工程，药物控释以及靶向载体等方面的应用和前景作一综述和展望。     

聚丙交酯/聚乙二醇多嵌段共聚物的合成及其性能

聚丙交酯 (ＰＬＬＡ)由于具有良好的生物降解性和生物相容性 ,在医学领域已经得到了广泛的临床应用 ,近来又被制备成细胞支架大量应用于组织工程中[1,2 ] ,但由于其疏水性而造成细胞亲和性不好 .聚乙二醇 (ＰＥＧ)具有良好的亲水性 ,良好的生物相容性 ,但是ＰＥＧ是非降解性的 ,只有低分子量的ＰＥＧ可以被吞噬细胞所吞噬或透过肾滤膜而排出体外 ,因此 ,低分子量的ＰＥＧ常被用来与丙交酯 (Ｌ ＬＡ)共聚以改善ＰＬＬＡ支架的亲水性 .聚丙交酯 聚乙二醇共聚物 (ＰＬＥ)的三嵌段及两嵌段共聚物的合成及其性能的研究已被广泛报道[3～ 5] .研究…     

电活性可生物降解纳米复合材料PAP/op-HA/PLGA的制备及成骨活性

以苯胺五聚体与聚乳酸（PLA）的三嵌段共聚物（PAP）与表面接枝低聚乳酸的纳米羟基磷灰石（op-HA）和聚丙交酯-乙交酯（PLGA）的复合物共混,制备的电活性可降解纳米复合材料PAP/op-HA/PLGA为研究对象,采用紫外可见光谱、循环伏安扫描和标准四探针法分析其电化学特性及电导率。ESEM观察其膜表面形貌,接触角评价其亲水性。通过在材料膜表面接种兔成骨细胞进行体外培养,采用荧光染色、NIH Image J图像分析和Real-time PCR综合评价细胞在材料表面的粘附、扩展（细胞面积比）和成骨相关基因的表达水平,以此评价新型电活性纳米复合骨修复材料PAP/op-HA/PLGA的表面性质和生物活性。结果表明,PAP/op-HA/PLGA的电导率较低（~5?10?6 S/cm）但具有良好的电化学氧化还原性能,PAP含量为0.1%时材料的亲水性明显改善,成骨细胞的粘附和扩展明显增强。培养7天时骨形态蛋白- 2（BMP-2）和骨连接蛋白（Osteonectin）的基因表达水平明显提高,而对Ⅰ型胶原蛋白的基因表达没有明显影响。提示PAP/op-HA/PLGA具有良好的细胞相容性和成骨活性。     

PLA-mPEG嵌段共聚物胶团的制备及其表面张力

PLA-mPEG嵌段共聚物胶团的制备及其表面张力;丙交酯;甲氧基聚乙二醇;嵌段共聚物;纳米胶团;表面张力     

结肠酶特异响应性两亲高分子载体的合成和表征

合成了一种可在结肠部位被特异酶解的两亲性嵌段高分子,由聚丙交酯(PLA)疏水嵌段和聚乙二醇(PEG)亲水嵌段组成,两者通过5,5′-偶氮二水杨酸(OLZ)偶联,其中的偶氮键可被结肠部位的偶氮还原酶特异酶解.利用FTIR、NMR和GPC等方法表征了共聚物的结构,并通过透射电镜(TEM)和动态光散射(DLS)等方法研究了该高分子载体在水溶液中的组装行为.结果表明MPEG-OLZ-b-PLA可在水介质中形成尺寸在30nm左右的球形胶束,并在大鼠全盲肠提取液中被特异性酶解。     

壳聚糖修饰PLGA阳离子型纳米微球的制备与表征

采用单乳化-溶剂(O/W)挥发技术制备表面带正电荷的壳聚糖(CHS)修饰聚乙/丙交酯(PLGA)纳米微球(PLGA/CHS), 通过正交试验优化了纳米微球的制备条件. 结果表明, 微球粒径可控制在150～200 nm内, 在pH=4时, 纳米微球表面电位最高为55 mV. 影响微球粒径的主要因素是聚合物的浓度, CHS的分子量和浓度以及介质的pH值对微球表面电位也有明显影响. 制备粒径较小而表面电位较高的PLGA/CHS纳米微球条件为: ρ(CHS)=3 mg/mL, ρ(PLGA)=10 mg/mL, Vo/Va=1/4. SEM图像显示经CHS修饰的PLGA的纳米微球形状规整, 荧光显微观察和XPS分析结果证实CHS包覆于微球表面.     

大粒径磁性高分子微球的制备

大粒径磁性高分子微球的制备邱广明邱广亮＊（内蒙古工业大学电力学院动力系呼和浩特）（内蒙古师范大学生物系呼和浩特０１００２２）关键词高分子磁性微球，苯乙烯，丙烯酸，共聚物，制备１９９６－１１－２５收稿，１９９７－０６－１１修回内蒙古自然科学基金资助项目...     

载万古霉素PLGA-PEG-PLGA温度敏感水凝胶的体外抗菌性能

利用聚乙二醇（PEG 1500）引发乙交酯和D,L-丙交酯开环共聚合制备聚丙交酯乙交酯（PLGA）三嵌段共聚物（PLGA-PEG-PLGA）温敏水凝胶材料,并通过核磁共振氢谱（¹H NMR）确定产物的结构及组成.应用倒置小瓶法测量得到不同浓度下PLGA-PEG-PLGA水凝胶的溶胶-凝胶相变温度为27~32℃.此外,体外降解实验及细胞毒性实验结果表明,质量分数为25%的水凝胶有满意的降解速度及良好的生物相容性.同时,利用紫外-可见光谱分析了载万古霉素水凝胶的体外药物释放行为,结果表明,万古霉素可以持续释放12 d.抗菌实验结果表明,载万古霉素水凝胶具有良好的抗菌效果.表明PLGA-PEG-PLGA三嵌段温敏水凝胶是一种较理想的万古霉素缓释载体,具有良好的临床应用前景.     

聚乙二醇甲醚-聚(D,L-乳酸)嵌段共聚物纳米胶束的制备

聚乙二醇甲醚-聚(D;L-乳酸)嵌段共聚物纳米胶束的制备;聚乙二醇单甲醚;两亲性二嵌段共聚物;纳米沉淀技术     

肾上腺髓质素微球复合PLGA/纳米轻基磷灰石支架材料的制备及生物活性评价

利用离子乳化交联法制备了负载肾上腺髓质素的壳聚糖微球,应用热致相分离法制备了乳酸和乙醇酸共聚物/纳米羟基磷灰石(PLGA/nHA)支架材料并在其中包覆载药微球.通过扫描电子显微镜、体外释放行为、材料溶血行为、碱性磷酸酶(ALP)活性的测定、支架材料表面细胞荧光染色和MTT[3-(4,5-二甲基噻唑-2)-2,5-二苯基...     

Synthesis and characterization of poly(ethylene oxide)/polylactide/poly(ethylene oxide) triblock copolymer

Poly(ethylene oxide/polylactide/poly(ethylene oxide) (PEO/PL/PEO) triblock copolymers, in which each block is connected by an ester bond, were synthesized by a coupling reaction between PL and PEO. Hydroxyl‐terminated PLs with various molecular weights were synthesized and used as hard segments. Hydroxyl‐terminated PEOs were converted to the corresponding acid halides via their acid group and used as a soft segment. Triblock copolymers were identified by Fourier transform infrared spectroscopy, ¹H NMR, and gel permeation chromatography. Differential scanning calorimetry (DSC) and X‐ray diffractometry of PEO/PL/PEO triblock copolymers suggested that PL and PEO blocks were phase‐separated and that the crystallization behavior of the PL block was markedly affected by the presence of the PEO block. PEO/PL/PEO triblock copolymers with PEO 0.75k had two exothermic peaks (by DSC), and both peaks were related to the crystallization of PL. According to thermogravimetric analysis, PEO/PL/PEO triblock copolymer showed a higher thermal stability than PL or PEO. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2545–2555, 2002     

聚乙醇酸类生物降解高分子

聚乙醇酸类生物降解高分子具有良好的生物相容性,在药物缓释材料、组织工程材料、手术缝合线等医用领域有广泛的应用。文章按聚乙醇酸类生物降解高分子的种类不同,介绍了它们的合成、性能与应用,尤其是乙醇酸-乳酸共聚物的研究进展。展望聚乙醇酸类生物降解高分子的未来,降低合成成本是广泛应用的关键,因此简单易行的、以乙醇酸等单体为原料的直接缩聚法合成值得关注。     

生物可降解聚乙二醇-b-聚对苯二甲酸丁二醇酯共聚物载药微球的制备

嵌段共聚物;生物可降解性;左炔诺孕酮;载药性;生物可降解聚乙二醇-b-聚对苯二甲酸丁二醇酯共聚物载药微球的制备     

注射用生物可降解胰岛素纳米微球的制备

共聚物;药剂释放体系;注射用生物可降解胰岛素纳米微球的制备     

聚己内酯-聚丙交酯-聚醚三元共聚高分子微粒及其降解的研究

用乳化－ 溶剂蒸发法制备了聚己内酯－ 聚丙交酯－ 聚醚三元无规共聚物微粒,且与用相同方法制备的聚己内酯（ＰＣＬ） 和聚己内酯－ 聚醚嵌段共聚物微粒的形态进行了比较,讨论了材料的亲水性,以及三元无规共聚物中亲水性聚醚链段的长度及含量对所形成微粒形态的影响。研究结果表明,随着聚合物由疏水性向亲水性转变,所生成微粒的形态则从光滑、多孔、到不规则变化。证明了三元无规共聚物多孔微粒的形成是由于亲水的聚醚链段向水相取向所致。在３７ ℃、ｐＨ７ ．４ 的缓冲液中进行了三元无规共聚物微粒的降解,结果表明,随着降解时间的延长, 三元无规共聚物的分子量逐渐下降,且其中的聚醚链段含量有明显的降低。     

Biodegradable/biocompatible ABC triblock copolymer bearing hydroxyl groups in the middle block

New biodegradable/biocompatible ABC block copolymers, poly(ethylene oxide)‐b‐poly(glycidol)‐b‐poly(L ,L ‐lactide) (PEO‐PGly‐PLLA), were synthesized. First, PEO‐b‐poly(1‐ethoxyethylglycidol)‐b‐PLLA was synthesized by a successive anionic ring‐opening copolymerization of ethylene oxide, 1‐ethoxyethylglycidyl ether, and L ,L ‐lactide initiated with potassium 2‐methoxyethanolate. In the second step, the 1‐ethoxyethyl blocking groups of 1‐ethoxyethylglycidyl ether were removed at weakly acidic conditions leaving other blocks intact. The resulting copolymers were composed of hydrophilic and hydrophobic segments joined by short polyglycidol blocks with one hydroxyl group in each monomeric unit. These hydroxyl groups may be used for further copolymer transformations. The PEO‐PGly‐PLLA copolymers with a molecular weight of PLLA blocks below 5000 were water‐soluble. Above the critical micellar concentration (ranging from 0.05 to1.0 g/L, depending on the composition of copolymer), copolymers formed macromolecular micelles with a hydrophobic PLLA core and hydrophilic PEO shell. The diameters of the micelles were about 25 nm. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3750–3760, 2003     

聚苯并咪唑-锂盐-聚乙二醇单甲醚共混全固态聚合物电解质的制备及性能

使用共混后浇铸成膜的方法,制备了聚苯并咪唑-锂盐-聚乙二醇单甲醚组成的锂离子电池共混全固态聚合物电解质。通过傅里叶红外光谱(FT-IR)、X射线衍射(XRD)、差示扫描量热(DSC)、拉伸与交流阻抗测试表征了共混全固态电解质的结构与性能。研究了不同锂盐以及各组分含量对共混全固态电解质的力学性能与电导率的影响。结果表明:聚苯并咪唑与聚乙二醇单甲醚之间存在氢键;共混全固态电解质中聚乙二醇单甲醚处于无定形态;锂盐的加入使聚乙二醇单甲醚的玻璃化转变温度下降;聚乙二醇单甲醚含量越高,共混膜强度越低,电导率越高,并且使用三氟甲磺酸锂作为锂盐时其电导率最高,室温下可以达到3.58×10~(-5) S/cm,高温下可以达到3.3×10~(-3) S/cm,高温下满足对锂离子电池的使用需求。     

Synthesis and Characterization of Photocrosslinkable Biodegradable Polymers Derived from 4‐Hydroxycinnamic Acid

A novel series of photocrosslinkable biodegradable polymers was prepared by a high‐temperature solution polycondensation from a dichloride of 4,4′‐(adipoyldioxy)dicinnamic acid (CAC) and alkane diols of various methylene lengths (HO(CH₂)_nOH; n = 6–10) or poly(ethylene glycol)s (PEG) of various molecular weights . The CAC was synthesized by the condensation of adipoyl chloride and 4‐hydroxycinnamic acid. The chemical structures and properties of these polymers were characterized by elemental analysis, ultraviolet‐visible spectroscopy (UV‐VIS), Fourier transform infrared spectroscopy (FT‐IR), ¹H NMR spectroscopy, differential scanning calorimertry (DSC), and thermogravimetry (TG). All polymers had a high molecular weight and good solubility in organic solvents. DSC showed that T_m values of CACn (134–180 °C) were much higher than those of CACEm (25–56 °C). The CACE200 degraded very rapidly in the buffer solutions (pH 7.2) of Ps. Cepacia or Rh. delemar lipase at 37 °C, while CACn resisted the hydrolysis by these lipases during the test period. The ultraviolet light irradiation (λ ≥ 280 nm) caused the photocrosslinking reaction by an intermolecular dimerization at ambient temperature without a photosensitizer, as examined by UV‐VIS, FT‐IR spectroscopy, and gel formation. The gels prepared from CACEm (m ≈ 1 000) were swollen in water and showed characteristic properties of a hydrogel. The irradiation time and the molecular weight of PEGs controlled the degree of swelling of these hydrogels. The CACE8 300 gel irradiated for 20 min showed the largest degree of swelling of 10.5.

Weight loss of a CACE200 film as a function of time in a phosphate buffer solution containing no lipase (□), Ps. cepacia lipase (?), or Rh. delemar lipase (○) at 37 °C.     

嵌段共聚物傅里叶变换拉曼光谱

用傅里叶变换拉曼光谱(FT-Paman)研究了聚环氧乙烷-聚环氧丙烷-聚环氧乙烷(PEO-PPO-PEO)嵌段共聚物的无水样品,发现某些谱带对PEO0-PPO-PEO嵌段共聚物的结构和构象变化敏感,其中某些峰的相对强度的PPO/PEO比率和共聚物的构象有关,研究表明PluronicF68和F88具有一些反式构象的螺旋结构,PluronicP103(P123)是无规则结构,其它的嵌段共聚物处于二者之间.     

可生物降解聚合物的现状及生物降解性研究

综述了可生物降解聚合物的现状及发展、影响生物降解性的因素和生物降解性的评价方法。