环氧化天然橡胶中环氧基团分布情况的研究

通过在胶乳状态下原位生成过氧甲酸制备环氧化天然橡胶（ENR），采用傅里叶变换红外光谱（FRIR）对环氧化天然橡胶的结构进行表征，核磁共振谱仪（NMR）和差示扫描量热仪（DSC）对环氧基团的分布进行了研究，结果表明，过氧甲酸能迅速地渗透到橡胶粒子的内部，使环氧化基团分布在整个橡胶粒子上，环氧基团在ENR分子链上是无规分布...     

新的烯丙型环氧醇重排还原反应研究

自１９８０年Ｓｈａｒｐｌｅｓｓ［１］报道烯丙醇制备立体选择性烯丙型环氧醇化合物以来,有关烯丙型环氧醇的反应及其在有机合成中的应用研究日益受到重视,其中路易斯酸催化的反应尤为重要［２］．但由路易斯酸催化的反应极少涉及碳骨架的重排或基团的迁移．我们最近在...     

STUDY ON REACTION OF （μ_3－CCO_2Et）CO_2M（CO）_8（CpMe）（M＝Mo，W） WITH Na_2［Fe（CO）_4］．SYNTHESIS OF TWO KINDS OF THE NOVEL CLUSTERS EtO_2CCFeCoM（CO）_8（CpMe）H AND （OCC）FeCoM（CO）_8（CpMe）

ＳＴＵＤＹＯＮＲＥＡＣＴＩＯＮＯＦ（μ_３－ＣＣＯ_２Ｅｔ）ＣＯ_２Ｍ（ＣＯ）_８（ＣｐＭｅ）（Ｍ＝Ｍｏ，Ｗ）ＷＩＴＨＮａ_２［Ｆｅ（ＣＯ）_４］．ＳＹＮＴＨＥＳＩＳＯＦＴＷＯＫＩＮＤＳＯＦＴＨＥＮＯＶＥＬＣＬＵＳＴＥＲＳＥｔＯ_２ＣＣＦｅＣｏＭ（ＣＯ）_８...     

生物活性有机磷化合物的研究 ⅩⅩⅠⅤ.α-(苯基氨基甲酰氧基)烃基膦酸酯的合成和生物活性

氨基甲酸酯是一类具有良好生物活性的化合物，在目前新农药的基础研究中，创制同时兼具氨基甲酰基团和含磷基团的药剂，也是一种有趣的尝试，如Ｂｏｚｈｋｏｖａ等将取代氨基甲酰氧基引入敌百虫的骨架，合成了化合物（ＣＨ３Ｏ）２ＰＯＣＨ（ＣＣｌ３）ＯＣＯＮＲ［１］，...     

铱(I)苯乙胺Schiff碱络合物催化苯乙酮的不对称氢转移反应

以光学活性的苯乙胺和吡啶－２－甲醛缩合而得到的Ｓｃｈｉｆ碱（ＰＰＥＩ）（ＰＰＥＩ＝２－［［Ｎ－（１－ｐｈｅｎｙｌｅｔｈｙｌ）ｉｍｉｎｏ］ｍｅｔｈｙｌ］ｐｙｒｉｄｉｎｅ或２－［［Ｎ－（１－苯乙基）亚胺］甲基］吡啶）为配体，进而与［Ｉｒ（ＣＯＤ）Ｃｌ］２（ＣＯＤ＝１，５－环辛二烯）反应，合成了８个光学活性铱络合物，考察了它们在异丙醇存在下催化苯乙酮不对称氢转移反应的光学活性，发现［Ｉｒ（ＣＯＤ）（ＰＰＥＩ）Ｉ］具有较好的立体选择性．其光学产率最高可达３５．７％ｅ．ｅ．．     

[Ln(EO_2)_3](ClO_4)_3·3H_2O的晶体结构研究

合成了希土高氯酸盐开环冠醚二缩乙二醇（ＥＯ２）晶体，（Ｌｎ＝Ｎｄ，Ｈｏ），测定了结构，文内以Ｎｄ－Ｌ的数据为主要研究对象（方括号内是Ｈｏ－Ｌ的数据）。晶体属单斜晶系，Ｐ２１／ｎ空间群，化学式［Ｌｎ（ＥＯ２）３］（ＣｌＯ４）３·３Ｈ２Ｏ，晶胞参数为：ａ＝１４．１２４（１）［１４．０８７］，ｂ＝１３．９９０（１）［１４．０３９］，ｃ＝１５．２６５（１）［１５．０１４］；β＝９５．７８（１）［９５．６４］°；Ｖ＝３００１．１（６）［２９５５］３；Ｍｒ＝８１５．０１［８３５．７０］；Ｚ＝４；Ｄｃ＝１．８０４［１．８６５］ｇ／ｃｍ３；石墨单色器，μ（ＭｏＫα）＝２．０９［３．０７］ｍｍ－１，最终偏离因子Ｒ＝０．０５５［０．０７４］，ＲＷ＝０．０７１［０．１０９］。研究结果表明晶体具有相同的结构，配位多面体为九配位三帽三棱柱。发现ＥＯ２醚链有绕Ｃ－Ｃ键呈ＳＴＴＳ分布的规律。弱配体高氯酸根不参加配位。     

胺固化端环氧基二硅氧烷动力学及性能研究

合成了１，３－二甲基－１，３－二乙基－１，３－双［３－（２，３－环氧丙氧基）丙基］二硅氧烷（ＴＥＤＳ）．对其与二正丁胺的模型反应、与ＤＤＭ（４，４’－二氨基二苯基甲烷）的固化反应劝力学研究表明，反应对ＴＥＤＳ为一级反应．ＴＥＤＳ改性环氧Ｅ—５１体系的动态力学性能、冲击性能和形态结构的研究表明，随改性体系中ＴＥＤＳ含量的增加，体系的玻璃化温度是线性下降、冲击强度增大、冲击试样的断裂面渐渐显现出韧性断裂的特征．     

双核Cu(Ⅰ)配合物的热分解非等温动力学

由于钢作为活性配位中心离子，存在干具有生物功能的蛋白质大分子中，近年来钢的配位化学受到广泛关注．普遍认为，咪唤基在铜蛋白的配位化学中起重要作用＊，开展钢与具咪陵基配体所形成配合物的研究，有助于揭示钢在蛋白质中的生物化学功能及其与咪哩基等其它基团相互键合作用的本质．我们曾报导了四种新型具苯并咪吐基双核CIJ（）配合物：［CllZ’（OCTB）flC104h·1．SHZO川，［Cll。’（NMOCTB）］·（CIO。）。·H。O（2），［Cll。’（NBUOCTB）］（CIO。）z切，［Cll。’（NBOCTB）］·（CIO4h·H。O（4）的合…     

[M_4E_n](n=1,2)型簇合物中四重桥帽原子E对M-M作用的影响

由四核平面双帽［Ｍ４Ｅ２］型及单帽［Ｍ４Ｅ］型簇合物构型应满足的几何条件，得到判断有无Ｍ－Ｍ键存在的关系式Ｄ＝［０．９２（ＲＭ＋ＲＥ）］２－２Ｒ２Ｍ，并给出形成［Ｍ４Ｅ２］及［Ｍ４Ｅ］型簇合物时金属原子Ｍ和四重桥帽原子Ｅ点应满足的半径关系分别为ＲＥ≥１２ＲＭ和ＲＥ≥０．４１４ＲＭ。     

活泼配盐[(μ-RE)(μ-E′)Fe_2(CO)_6][Et_3NH][E,E′=S,Se]的亲电反应研究——蝶状Fe_2SSe及Fe_2Se_2簇合物的合成及表征

本文由［（μｔＢｕＳ）（μＣＯ）Ｆｅ２（ＣＯ）６］［Ｅｔ３ＮＨ］和硒粉形成的［（μｔＢｕＳ）（μＳｅ）Ｆｅ２（ＣＯ）６］［Ｅｔ３ＮＨ］，分别与溴化苄，二碘甲烷及邻一、间一、对一双（溴甲基）苯反应，合成了蝶状Ｆｅ２ＳＳｅ单簇物（μｔＢｕＳ）（μＰｈＣＨ２Ｓｅ）Ｆｅ２（ＣＯ）６（３ａ）和双簇物［（μｔＢｕＳ）Ｆｅ２（ＣＯ）６］２（μＳｅＺＳｅμ）［Ｚ＝ＣＨ２，ｏ．ｍ．ｐ双（亚甲基）苯］（４ａｄ）。类似地，由［（μＰｈＳｅ）（μＣＯ）Ｆｅ２（ＣＯ）６］［Ｅｔ３ＮＨ］和硫粉或硒粉所形成的［（μＰｈＳｅ）（μＳ）Ｆｅ２（ＣＯ）６］［Ｅｔ３ＮＨ］或［（μＰｈＳｅ）（μＳｅ）Ｆｅ２（ＣＯ）６］［Ｅｔ３ＮＨ］分别与对一双（溴甲基）苯反应合成了蝶状Ｆｅ２ＳＳｅ和Ｆｅ２Ｓｅ２双簇物［（μＰｈＳｅ）Ｆｅ２（ＣＯ）６］２［μＳ（ｐＣＨ２Ｃ６Ｈ４ＣＨ２）Ｓμ］（５ａ）及［（μＰｈＳｅ）Ｆｅ２（ＣＯ）６］２［μＳｅ（ＰＣＨ２Ｃ６Ｈ４ＣＨ２）Ｓｅμ］（５ｂ）。所有产物均经元素分析、ＩＲ和１ＨＮＭＲ表征。     

环氧化天然橡胶凝胶溶胶的热老化性能

环氧化天然橡胶凝胶溶胶的热老化性能;红外差谱     

Guide for Authors

The effects of epoxidized natural rubber (ENR) on the curing behaviors and adhesive strengths of an epoxy (diglycidyl ether of bisphenol-A) and dicyandiamide/2-methyl imidazole system are studied with differential thermal calorimetry (DSC), scanning electron microscopy (SEM), and Instron tensile testing instrument. From DSC analyses of specimens prepared with unsealed aluminum pans, it is obtained that the reaction exotherm, the time to maximal curing rate, the glass transition temperature, the rate constant, and the reaction order of the epoxy system change with respect to the content of ENR added because of the reaction of ENR with the epoxy system. The results obtained from SEM micrographs indicate that the particle size of the rubber phase increases with increasing the curing temperature and the ENR content. The volume fraction of the separated rubber phase also follows the similar trend except at the high curing temperature which implying that the dissolution of epoxy resin in the ENR phase also depends on the curing temperature and the amount of ENR present. The lap shear strengths of specimens prepared with etched aluminum substrates increase with increasing the curing temperature because of a better cure at a higher temperature, but decrease with increasing the ENR content resulting from an adverse effect of ENR on the mechanical properties of the cured resins.     

Processing characteristics and thermal stabilities of gel and sol of epoxidized natural rubber

The processing performances and aging behaviours of gel and sol separated from epoxidized natural rubber (ENR) using organic solvents were studied by using rubber processing analyzer (RPA), thermogravimetric analysis (TGA) and difference FT-IR method. As the gel with intermolecular ether structure is formed by the ring-opening reactions of a part of epoxy groups during the preparation and storage of ENR, the molar percentage of epoxy groups of gel is lower than that of sol. The gel shows higher elastic moduli to temperature and frequency responses, lower tan δ to frequency and strain response and higher elastic torque to strain response as comparing to those of sol. Therefore, the formation of gel will reduce processing performance of ENR. When the aging behaviours of gel and sol were analyzed by different methods, the aging reactions and their degrees were different because of the differences of aging conditions. Compared to gel, the sol is easy to be crosslinked, leading to a higher Δtan δ from the RPA analysis and it is also easy to be oxidized into small molecules, leading to lower onset temperature and apparent activation energy when being analyzed by TGA. However, the variations of functional groups of gel are more obvious than those of sol when analyzed by difference FT-IR method. As the mechanical properties of ENR will be varied with the variations of molecular structures, the formations of gel during preparation and storage of ENR will reduce the oxidative aging resistance of ENR.     

Thermal stability of high temperature epoxy adhesives by thermogravimetric and adhesive strength measurements

The thermal degradation of two high temperature epoxy adhesives has been measured in terms of weight loss and adhesion loss and the lifetime predictions are compared for the two independent measurements of thermal degradation. Weight loss measurements were performed at high temperature under accelerated thermal aging conditions. Adhesion loss measurements were performed at lower temperatures closer to typical continuous operating temperatures. An Arrhenius relationship is validated for the thermal degradation of the epoxy adhesives, and the extent of degradation in terms of weight loss and adhesion loss is modelled with an autocatalytic rate expression. The degradation kinetic parameters and models are compared between the two thermal degradation measurements and are found to give similar predictions for the lifetime of the adhesives. In addition, the relationship between network degradation and loss of adhesive strength is discussed.     

The synthesis of novel Schiff base antioxidants to promote anti-thermal aging properties of natural rubber

There is of great interest in promotion of anti-thermal aging properties of natural rubber (NR) to improve the applicability. In this study, two novel Schiff base antioxidants (SBAOs) for NR were synthesized utilizing 4-aminodiphenylamine with 3,5-Di-tert-butyl-2-hydroxybenzaldehyde or cinnamic aldehyde in an ethanol medium. IR, ¹³C-NMR, and ¹H-NMR confirmed the structures of SBAOs. Addition of SBAOs improved the rheometric properties, mechanical properties and thermal oxidative stability of NR vulcanizates. Introduction of SBAOs in NR increased the apparent activation energy of thermal oxidative degradation according to Kissinger and FWO methods. Anti-thermal aging performance of SBAOs for NR is related to the structures. The C=N double bonds in SBAOs improve the electron density of Ar–OH and/or Ar–NH–Ar structures, benefiting the release of active hydrogen. The active hydrogen could capture free radicals initiated during the thermal oxidative aging process. The lone pair electrons on nitrogen atom are also beneficial to delay or terminate free radical reaction. NR with SBAOs showed high mechanical properties of the tensile strength, tensile stress at 100% elongation and Shore A hardness compared to commercial BHT and 4010 during aging 96 h. It indicates potential applications of SBAOs as efficient antioxidants for NR.     

环氧天然橡胶接枝高分散白炭黑增强天然橡胶复合材料的制备及表征

基于白炭黑表面硅羟基与环氧基团的可反应性,利用Haake流变仪的高温高剪切作用,在170℃下,实现了环氧天然橡胶(ENR)对白炭黑的固态原位接枝,制备出一种高分散疏水型白炭黑.探讨了白炭黑和ENR的反应配比对增强性能的影响,确定合适的反应比例为3∶1.FTIR、TGA和TEM的分析结果证实了ENR被接枝到白炭黑表面上.对比研究了接枝前、后白炭黑对增强天然橡胶(NR)复合材料性能的影响,测试结果表明接枝白炭黑在天然橡胶中具有良好的分散性并能明显改善对天然橡胶的增强效果;接枝于白炭黑表面上的环氧天然橡胶分子玻璃化转变向高温偏移,使该复合材料在常温下具备优异力学性能的同时也体现出了高动态滞后的特点.     

Evaluation of the thermal degradation of PC/ABS/montmorillonite nanocomposites

Polycarbonate (PC)/acrylonitrile‐butadiene‐styrene (ABS) polymer alloy/montmorillonite (MMT) nanocomposites were prepared using a direct melt intercalation technique. The pyrolytic degradation and the thermo‐oxidative degradation of the polymer alloy and the nanocomposites were studied by thermogravimetric analysis (TGA). The kinetic evaluations were performed by the model‐free kinetic analysis and the multivariate non‐linear regression. Apparent kinetic parameters for the overall degradation were calculated. The results show that PC/ABS/MMT nanocomposites have high thermal stability and low flammability. Their pyrolytic degradation and the thermo‐oxidative degradation model are different. The pyrolytic degradation reaction of the polymer is a two‐step parallel reaction model: nth‐order reaction model, and ath‐degree autocatalytic reaction with an nth‐order reaction autocatalytic reaction, whereas the thermal oxidative degradation reaction of the polymer is a two‐step following reaction model: A → B → C of nth‐order reaction model, and autocatalytic reaction model. Copyright © 2005 John Wiley & Sons, Ltd.     

Kinetics and mechanism of nucleophilic halogen exchange in furan derivatives

Studies are made of the reaction of 5-bromofurfurylidenaniline with aromatic amines (reaction 1), of the disproportionation of 5-bromofurfurylidenaniline (reaction 2), and of the reaction of 5-bromofurfurylidenaniline and 5-bromofurfural with saturated secondary amines (reaction 3). It is shown that these reactions are of the autocatalytic type (the catalyst being a reaction product, the hydrobromide of the amine), that addition of acid accelerates them, while they are retarded by addition of alkali. The hypothesis is advanced that in these reactions the active form of the substrate is the salt containing the fragment. The latter arises by protonation of the Schiff's base (reactions 1 and 2), or by quaternization of aminoacetals (which are products formed by addition of a secondary amine across the (double) bonds in through the action of the hydrohalide salt of the amine (reaction 3).     

非等温法研究TGDDM/DDS体系固化反应动力学

采用DSC对4,4′-四缩水甘油基二氨基二苯基甲烷(TGDDM)和3,3′-二氨基二苯基砜(DDS)体系的固化反应动力学进行了研究.分别通过n级反应法和Malek的最大概然机理函数法确定了固化反应机理函数,求解了固化反应动力学参数,得到了固化反应动力学模型.结果表明,通过Kissinger,Crane方法求解动力学参数所得到的n级反应模型与实验值差别较大;而采用Malek方法判别机理,表明该固化反应按照自催化反应机理进行,实验得到的DSC曲线与模型计算所得到的曲线吻合的较好,所确立的模型在5~20K/min的升温速率下能较好地描述TGDDM/DDS体系的固化反应过程,并为工艺参数的选择和工艺窗口的优化提供了理论依据.     

Isothermal cure kinetics of epoxy/phenol‐novolac resin blend system initiated by cationic latent thermal catalyst

The investigation of the cure kinetics of a diglycidyl ether of bisphenol A (DGEBA)/phenol‐novolac blend system with different phenolic contents initiated by a cationic latent thermal catalyst [N‐benzylpyrazinium hexafluoroantimonate (BPH)] was performed by means of the analysis of isothermal experiments using a differential scanning calorimetry (DSC). Latent properties were investigated by measuring the conversion as a function of curing temperature using a dynamic DSC method. The results indicated that the BPH in this system for cure is a significant thermal latent initiator and has good latent thermal properties. The cure reaction of the blend system using BPH as a curing agent was strongly dependent on the cure temperature and proceeded through an autocatalytic kinetic mechanism that was accelerated by the hydroxyl group produced through the reaction between DGEBA and BPH. At a specific conversion region, once vitrification took place, the cure reaction of the epoxy/phenol‐novolac/BPH blend system was controlled by a diffusion‐control cure reaction rather than by an autocatalytic reaction. The kinetic constants k₁ and k₂ and the cure activation energies E₁ and E₂ obtained by the Arrhenius temperature dependence equation of the epoxy/phenol‐novolac/BPH blend system were mainly discussed as increasing the content of the phenol‐novolac resin to the epoxy neat resin. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2945–2956, 2000