等浓度的氯化铵和硫酸铵溶液哪个pH高

有中学化学参考资料题:0.10 mol/L的NH4Cl和(NH4)2SO4溶液哪个pH值高?这似乎是个中学生可做的简单题目,仔细考虑不是如此.如果简单地认为盐酸和硫酸都是强酸,而硫酸是二元酸,硫酸铵溶液中铵盐浓度为0.20 mol/L,那么NH4Cl溶液pH高,那是不妥的.硫酸是二元酸,第一个氢离子能完全电离,第二个氢离子部分电离,如此考虑情况怎么样呢?是不是答案发生变化?这要通过计算来说明.     

Enhanced efficiency and stability in Sn-based perovskite solar cells with secondary crystallization growth

The conversion efficiencies reported for Tin(Sn)halide-based perovskite solar cells(PSCs)fall a large gap behind those of lead halide-based PSCs,mainly because of poor film quality of the former.Here we report an efficient strategy based on a simple secondary crystallization growth(SCG)technique to improve film quality for tin halide-based PSCs by applying a series of functional amine chlorides on the perovskite surface.They were discovered to enhance the film crystallinity and suppress the oxidation of Sn²⁺remarkably,hence reduce trap state density and non-irradiative recombination in the absorber films.Furthermore,the SCG film holds the band levels matching better with carrier transport layers and herein favoring charge extraction at the device interfaces.Consequently,a champion device efficiency of 8.07% was achieved alo ng with significant enhancements in VOC and JSC,in contrast to 5.35% of the control device value.Moreover,the SCG film-based devices also exhibit superior stability comparing with the control one.This work explicitly paves a novel and general strategy for developing high performance lead-free PSCs.     

Energy level engineering of charge selective contact and halide perovskite by modulating band offset:Mechanistic insights

Mixed cation and anion based perovskites solar cells exhibited enhanced stability under outdoor conditions,however,it yielded limited power conversion efficiency when TiO₂ and Spiro-OMeTAD were employed as electron and hole transport layer(ETL/HTL)respectively.The inevitable interfacial recombination of charge carriers at ETL/perovskite and perovskite/HTL interface diminished the efficiency in planar(n-i-p)perovskite solar cells.By employing computational approach for uni-dimensional device simulator,the effect of band offset on charge recombination at both interfaces was investigated.We noted that it acquired cliff structure when the conduction band minimum of the ETL was lower than that of the perovskite,and thus maximized interfacial recombination.However,if the conduction band minimum of ETL is higher than perovskite,a spike structure is formed,which improve the performance of solar cell.An optimum value of conduction band offset allows to reach performance of 25.21%,with an open circuit voltage(VOC)of 1231 mV,a current density JSC of 24.57 mA/cm² and a fill factor of 83.28%.Additionally,we found that beyond the optimum offset value,large spike structure could decrease the performance.With an optimized energy level of Spiro-OMeTAD and the thickness of mixed-perovskite layer performance of 26.56% can be attained.Our results demonstrate a detailed understanding about the energy level tuning between the charge selective layers and perovskite and how the improvement in PV performance can be achieved by adjusting the energy level offset.     

Recent Advances of Pure Organic Room Temperature Phosphorescence Materials for Bioimaging Applications

Bioimaging,as a powerful and helpful tool,which allows people to investigate deeply within living organisms,has contributed a lot for both clinical theranostics and scientific research.Pure organic room temperature phosphorescence(RTP)materials with the unique features of ultralong luminescence lifetime and large Stokes shift,can efficiently avoid biological autofluorescence and scattered light through a time-resolved imaging modality,and thus are attracting increasing attention.This review classifies pure organic RTP materials into three categories,including small molecule RTP materials,polymer RTP materials and supramolecular RTP materials,and summarizes the recent advances of pure organic RTP materials for bioimaging applications.     

A new strategy to access Co/N co-doped carbon nanotubes as oxygen reduction reaction catalysts

Carbon nanotubes(CNTs),as one-dimensional nanomaterials,show great potential in energy conversion and storage due to their efficient electrical conductivity and mass transfer.However,the security risks,time-consuming and high cost of the preparation process hinder its further application.Here,we develop that a negative pressure rather than a following gas environment can promote the generation of cobalt and nitrogen co-doped CNTs(Co/N-CNTs) by using cobalt zeolitic imidazolate framework(ZIF-67) as a precursor,in which the negative pressure plays a key role in adjusting the size of cobalt nanoparticles and stimulating the rearragement of carbon atoms for forming CNTs.Importantly,the obtained Co/N-CNTs,with high content of pyridinic nitrogen and abundant graphitized structure,exhibit superior catalytic activity for oxygen reduction reaction(ORR) with half-wave potential(E_1/2) of 0.85 V and durability in terms of the minimum current loss(2%) after the 30,000 s test.Our development provides a new pathway for large-scale and cost-effective preparation of metal-doped CNTs for various applications.     

Stabilizing High-voltage Cathode Materials for Next-generation Li-ion Batteries

The pressing demand for high-energy/power lithium-ion batteries requires the deployment of cathode materials with higher capacity and output voltage.Despite more than ten years of research,high-voltage cathode mate-rials,such as high-voltage layered oxides,spinel LiNi0.5Mn1.5O4,and high-voltage polyanionic compounds still cannot be commercially viable due to the instabilities of standard electrolytes,cathode materials,and cathode electrolyte interphases under high-voltage operation.This paper summarizes the recent advances in addressing the surface and interface issues haunting the application of high-voltage cathode materials.The understanding of the limitations and advantages of different modification protocols will direct the future endeavours on advancing high-energy/power lithium-ion batteries.     

Suppressing trap states and energy loss by optimizing vertical phase distribution through ternary strategy in organic solar cells

Suppressing the trap-state density and the energy loss via ternary strategy was demonstrated.Favorable vertical phase distribution with donors(acceptors)accumulated(depleted)at the interface of active layer and charge extraction layer can be obtained by introducing appropriate amount of polymer acceptor N2200 into the systems of PBDB-T:IT-M and PBDB-TF:Y6.In addition,N2200 is gradiently distributed in the vertical direction in the ternary blend film.Various measurements were carried out to study the effects of N2200 on the binary systems.It was found that the optimized morphology especially in vertical direction can significantly decrease the trap state density of the binary blend films,which is beneficial for the charge transport and collection.All these features enable an obvious decrease in charge recombination in both PBDB-T:IT-M and PBDB-TF:Y6 based organic solar cells(OSCs),and power conversion efficiencies(PCEs)of 12.5%and 16.42%were obtained for the ternary OSCs,respectively.This work indicates that it is an effective method to suppress the trap state density and thus improve the device performance through ternary strategy.     

Conformational Properties of Comb-shaped Polyelectrolytes with Negatively Charged Backbone and Neutral Side Chains Studied by a Generic Coarse-grained Bead-and-Spring Model

A generic coarse-grained bead-and-spring model,mapped onto comb-shaped polycarboxylate-based(PCE)superplasticizers,is developed and studied by Langevin molecular dynamics simulations with implicit solvent and explicit counterions.The agreement on the radius of gyration of the PCEs with experiments shows that our model can be useful in studying the equilibrium sizes of PCEs in solution.The effects of ionic strength,side-chain number,and side-chain length on the conformational behavior of PCEs in solution are explored.Single-chain equilibrium properties,including the radius of gyration,end-to-end distance and persistenee length of the polymer backbone,shape-asphericity parameter,and the mean span dimension,are determined.It is found that with the increase of ionic strength,the equilibrium sizes of the polymers decrease only slightly,and a linear dependenew of the persistence length of backbone on the Debye screening length is found,in good agreement with the theory developed by Dobrynin.Increasing side-chain numbers and/or side-chain lengths increases not only the equilibrium sizes(radius of gyration and mean span)of the polymer as a whole,but also the persistence length of the backbone due to excluded volume interactions.     

Three-dimensionalization via control of laser-structuring parameters for high energy and high power lithium-ion battery under various operating conditions

Laser-structuring is an effective method to promote ion diffusion and improve the performance of lithium-ion battery(LIB)electrodes.In this work,the effects of laser structuring parameters(groove pitch and depth)on the fundamental characteristics of LIB electrode,such as interfacial area,internal resistances,material loss and electrochemical performance,are investigated,LiNi_0.5Co_0.2Mn_0.3O₂ cathodes were structured by a femtosecond laser by varying groove depth and pitch,which resulted in a material loss of 5%-14%and an increase of 140%-260%in the in terfacial area between electrode surface and electrolyte.It is shown that the importance of groove depth and pitch on the electrochemical performance(specific capacity and areal discharge capacity)of laser-structured electrode varies with current rates.Groove pitch is more im porta nt at low current rate but groove depth is at high curre nt rate.From the mapping of lithium concentration within the electrodes of varying groove depth and pitch by laser-induced breakdown spectroscopy,it is verified that the groove functions as a diffusion path for lithium ions.The ionic,electronic,and charge transfer resistances measured with symmetric and half cells showed that these internal resistances are differently affected by laser structuring parameters and the changes in porosity,ionic diffusion and electronic pathways.It is demonstrated that the laser structuring parameters for maximum electrode performance and minimum capacity loss should be determined in consideration of the main operating conditions of LIBs.     

Mesh-like vertical structures enable both high areal capacity and excellent rate capability

In order to balance electrochemical kinetics with loading level for achieving efficient energy storage with high areal capacity and good rate capability simultaneously for wearable electronics,herein,2 D meshlike vertical structures(NiCo_2 S_4@Ni(OH)_2) with a high mass loading of 2.17 mg cm^-2 and combined merits of both 1 D nanowires and 2 D nanosheets are designed for fabricating flexible hybrid supercapacitors.Particularly,the seamlessly interconnected NiCo_2 S_4 core not only provides high capacity of 287.5 μAh cm^-2 but also functions as conductive skeleton for fast electron transport;Ni(OH)_2 sheath occupying the voids in NiCo_2 S_4 meshes contributes extra capacity of 248.4 μAh cm^-2;the holey features guarantee rapid ion diffusion along and across NiCO_2 S_4@Ni(OH)_2 meshes.The resultant flexible electrode exhibits a high areal capacity of 535.9 μAh cm^-2(246.9 mAh g^-1) at 3 mA cm^-2 and outstanding rate performance with 84.7% retention at 30 mA cm^-2,suggesting efficient utilization of both NiCo_2 S_4 and Ni(OH)_2 with specific capacities approaching to their theoretical values.The flexible solid-state hybrid device based on NiCo_2 S_4@Ni(OH)_2 cathode and Fe_2 O_3 anode delivers a high energy density of 315 μWh cm^-2 at the power density of 2.14 mW cm^-2 with excellent electrochemical cycling stability.     

A NOVEL INTERPRETATION OF CONCENTRATION DEPENDENCE OF VISCOSITY OF DILUTE POLYMER SOLUTION*

The concentration dependence of the reduced viscosity of dilute polymer solution is interpreted in the light of anew concept of the self-association of polymer chains in dilute solution. The apparent self-association constant is defined asthe molar association constant divided by the molar mass of individual polymer chain and is numerically interconvertiblewith the Huggins coefficient. The molar association constant is directly proportional to the effective hydrodynamic volume ofthe polymer chain in solution and is irrespective of the chain architecture. The effective hydrodynamic volume accounts forthe non-spherical conformation of a short polymer chain in solution and is a product of a shape factor and hydrodynamicvolume. The observed enhancement of Huggins coefficient for short chain and branched polymer is satisfactorily interpretedby the concept of self-association. The concept of self-association allows us to predict the existence of a boundaryconcentration C_s (dynamic contact concentration) which divides the dilute polymer solution into two regions.     

含树枝体疏水缔合聚合物——聚醚树枝体改性聚丙烯酰胺的合成和性质

疏水缔合聚合物是一类含有少量疏水基团的水溶性功能高分子.在水溶液中,这类聚合物在疏水作用驱动下容易发生缔合,并伴随产生独特的缔合行为和溶液性质,因此研究这类聚合物具有重要的理论和应用意义.     

异构丁醇在四氯化碳、正庚烷、苯和1,2二氯乙烷中的红外光谱研究

利用FT-IR,测定了四种异构丁醇十四氯化碳、+正庚烷, +苯和1,2-二氯乙烷稀溶液在3800—3000 cm~(-1)内的红外吸收光谱。缔合峰与自由羟基峰的面积之比与溶质、溶剂的性质有关, 且在极稀溶液区与溶质的质量百分比浓度之间有良好的直线关系。本文又运用1-n(环状)模型对有关体系进行了对比研究。结果表明, 丁醇分子支链度的增加以及丁醇分子与苯和1,2-二氯乙烷之间的特殊相互作用, 降低了醇分子的缔合能力。稀溶液中, 丁醇分子在苯和1,2-二氯乙烷中主要以单体和环状二聚体形式存在, 在四氯化碳中以单体和环状三聚体形式存在, 而正丁醇分子在正庚烷中主要为单体和环状四聚体, 异、仲、特丁醇主要为环状三聚体和单体。     

Stable Crystalline Nanohoop Radical and Its Self-Association Promoted by van der Waals Interactions

A stable nanohoop radical (OR3) combining the structures of cycloparaphenylene and an olympicenyl radical is synthesized and isolated in the crystalline state. X-ray crystallographic analysis reveals that OR3 forms a unique head-to-tail dimer that further aggregates into a one-dimensional chain in the solid state. Variable-temperature NMR and concentration-dependent absorption measurements indicate that the π-dimer is not formed in solution. An energy decomposition analysis indicates that van der Waals interactions are the driving force for the self-association process, in contrast with other olympicenyl derivatives that favor π-dimerization. The physical properties in solution phase have been studied, and the stable cationic species obtained by one-electron chemical oxidation. This study offers a new molecular design to modulate the self-association of organic radicals for overcoming the spin-Peierls transition, and to prepare novel nanohoop compounds with spin-related properties.     

Self-association of water-soluble fluorinated diblock copolymers in solutions

The self-association of the fluorinated diblock copolymer, poly(methacrylic acid)-block-poly(perfluorooctylethyl methacrylate) (PMAA-b-PFMA), in water has been investigated by light scattering, potentiometry, atomic force microscopy, and transmission electron microscopy. The size of the polymer micelles increases, as the degree of dissociation of the PMAA blocks increases. Since the charged PMAA block takes the stretched structure, PMAA-b-PFMA can easily form large micelles due to the low steric hindrance of PMAA blocks. Addition of NaCl shielded electrostatic repulsion in the PMAA chain and induced the formation of smaller micelles than water without NaCl did because of the bulky structure of the PMAA chain in the shell of the micelles. The micelle of PMAA-b-PFMA in ethanol is larger than that of poly(t-butyl methacrylate)-block-poly(perfluorooctylethyl methacrylate) (PtBMA-b-PFMA) in ethanol as a result of the higher steric hindrance of the PtBMA block. The dimensions of the core and shell of the micelles were estimated. The micelle of PMAA-b-PFMA in water possesses a rather thick shell and a large volume per molecule, consistent with the extended PMAA chain. On the other hand, the shell of the micelle in an ethanol solution of PtBMA-b-PFMA is thin but has a large surface area. Facts are consistent with the shrunk structure of the PtBMA block in poor solvent.     

Influence of alkyl substituents on the solution- and surface-organization of hexa-peri-hexabenzocoronenes

Three hexa-peri-hexabenzocoronenes (HBCs) with branched, bulky alkyl substituents of different lengths in the periphery of the aromatic core have been synthesized to tune the self-association properties in solution. 1H NMR and photophysical measurements were used to probe the solution organization in comparison to the known hexa-dodecyl-substituted HBC in different solvent systems. Thermodynamic parameters for the self-association in solution, obtained by curve fitting of the concentration- and temperature-dependent NMR data using van't Hoff analysis, indicated that the self-association is an enthalpically driven process that is entropically disfavored. Photoluminescence and NMR results were both employed to determine the critical concentration where no self-association for different compounds occurred. The interactions between the molecules could be controlled by varying the nonsolvent content in the solvent mixtures, supporting the model of solvophobic effects. The spatial demand of the solubilizing side chains modulated the self-association in solution. This behavior was translated into the solution casting process, where the kinetic in addition to the thermodynamic parameters played an essential role for structure formation. The study illuminates the relationship between the solution association of HBCs and the morphology, when processed on a surface. These results are essential for the application of these materials in devices.     

高分子稀溶液粘度方程中Huggins系数的新解释

高分子稀溶液的粘度常用 Huggins方程 [1] 描述 ,即ηsp/ c=[η] +k H[η] 2 c ( 1 )式中的系数 k H(称为 Huggins系数或斜率常数 )通常认为是一个表征高分子在溶液中的流体力学和热力学相互作用的无量纲数值因子 ,应是一个和分子量无关的常数 .但是早在 50年代初就已发现 ,高分Fig. 1　 Variation of k H with intrinsic viscosity forpolystyrene in toluene or benzene at2 5℃The line is calculated from eq.( 9) with A=5.54andB=0 .0 535for PS in toluene.● PS in benzene;△ oligomeric PS in benzene; PS in toluene;× …     

Binding of dodecyloxyethylpyridinium bromide to polymer: the effect of molecular geometry of surfactant

Dodecyloxyethylpyridinium bromide (C₁₂EPB) has been synthesized and compared with the normal N-alkylpyridinium bromides, C_nPB (n=12, 13, 14) to see how the insertion of an oxyethylene group influences the binding behavior to an oppositely charged linear polymer, sodium poly(2-acrylamide-2-methypropanesulfonate) (PAMPS). The geometry factor of surfactant in micellization and in polymer-surfactant interaction are focused on. The oxyethylene group gives a contribution by −1.3 kT to the free energy of micellization and by −1.4 kT to the free energy of binding. The micelle and the cluster of surfactant on polymer are considered to consist roughly of two regions, an outer region containing the ionic headgroup and the first three or four carbons of alkyl chain, and an interior region containing the remaining portions of hydrocarbon chains. The interpositioning of a linkage segment at -position extends the hydrophobic chain in the inner region and favors the surfactant self-association as well as the binding with the oppositely charged polymer.     

A study by ultraviolet spectroscopy on the self-association of diazines in aqueous solution

The self-association of pyridazine and pyrazine was studied in aqueous solution at acidic, neutral and basic pH values, by ultraviolet spectroscopy. The spectra of pyridazine in the mid-ultraviolet region did not show any variation in molar absorptivity upon concentration of this compound, indicating that self-association is not important. By contrast, deviations from Beer-Lambert law with increasing concentration were found in pyrazine at the pH values studied. A single hypochromic effect was detected at pH<0, 0.6 and 11.0, while a double hypochromic effect was observed at pH 6.9. These results were interpreted in terms of self-association of pyrazine leading to the formation of dimers at acidic and basic pH, and of dimers and polymers at neutral pH. From the fitting of the experimental curves of hypochromic effects, self-association constants were calculated. The self-association of 3-methylpyridazine, 2-methylpyrazine, and 2,3-dimethylpyrazine was also analyzed, concluding that the introduction of a methyl group has no influence upon the self-association of the pyridazine ring, but the self-association of pyrazine is enhanced by the introduction of two methyl groups. A comparative discussion of the self-association behavior of pyridazine, pyrazine and pyrimidine in aqueous solution has been carried out in terms of the differences in the molecular structure of the three diazines.     

Luminescent properties of dicyanoaurate(I) aggregates based on electrostatic assembly along poly(allylamine hydrochloride)

Poly(allylamine hydrochloride) (PAA) bearing positively charged side chains along the polymer chain was demonstrated to serve as a polymeric spatially aligned scaffold for aggregation and self-association of negatively charged [Au(CN)₂]⁻ through the electrostatic and aurophilic bonding interactions to afford the luminescent [Au(CN)₂]⁻ aggregates.