溴酚蓝分光光度法测定盐酸西布曲明

在pH 3.70的B-R缓冲溶液中,盐酸西布曲明与溴酚蓝以摩尔比1比2反应形成具有正吸收和负吸收的离子缔合物,最大正吸收波长为436nm,最大负吸收波长为590nm,线性范围分别在3.4×10-6 mol·L-1(正吸收)、3.8×10-6 mol·L-1(负吸收)以内,表观摩尔吸光率为1.83×105L.mol-1.cm-1(正吸收)、5.51×104L.mol-1.cm-1(负吸收),据此建立了测定盐酸西布曲明含量的分光光度法。方法用于合成样品及尿样中盐酸西布曲明的测定,回收率在96.8%～102.5%,相对标准偏差(n=6)在0.9%～1.7%之间。     

孔雀石绿双波长褪色法测定药物中的卡托普利

建立了一种测定卡托普利的双波长褪色分光光度法。在pH 5.76的Tris-盐酸缓冲溶液中,卡托普利与孔雀石绿反应生成具有两个明显负吸收峰的绿色离子缔合物,最大负吸收波长位于634 nm,次大负吸收波长位于588 nm,表观摩尔吸光系数(κ)分别为1.35×10~4和1.05×10~4[L/(mol·cm)],当用双波长褪色法测定时,表观摩尔吸光系数(κ)达2.40×10~4[L/(mol·cm)],线性范围为0~3.9(mg·L~(-1)),服从朗伯-比尔定律。还优化了反应条件,探讨了吸收光谱特征和共存物质的影响。方法用于市售卡托普利药物中卡托普利的测定,结果满意。     

依文思蓝光度法测定水样中阳离子表面活性剂

在弱酸性的NaH2PO4-Na2HPO4缓冲介质中,阳离子表面活性剂(CS)溴化十六烷基吡啶(CPB)、十六烷基三甲基溴化铵(CTAB)与依文思蓝(EB)染料反应,形成离子缔合物,溶液颜色发生明显改变,最大褪色波长位于610 nm。在最大褪色波长处,CS的浓度与褪色程度呈良好线性关系,从而建立了测定阳离子表面活性剂的光度法。在最大褪色波长处,CS的浓度在5.0×10-7~2.46×10-5mol/L(EB-CPB)、9.0×10-7~3.36×10-5mol/L(EB-CTAB)范围内遵守比耳定律,表观摩尔吸光系数为1.97×104L.mol-1.cm-1(EB-CPB)、1.25×104L.mol-1.cm-1(EB-CTAB),检出限为3.6×10-7mol/L(EB-CPB)、7.4×10-7mol/L(EB-CTAB)。本法用于水样中阳离子表面活性剂的测定,结果满意。     

曙红Y分光光度法测定阳离子表面活性剂及其机理研究

在弱酸性的HCl-NaAc缓冲介质中,阳离子表面活性剂(CS)与曙红Y(EY)染料反应,形成离子缔合物,溶液颜色发生明显改变,最大褪色波长分别在514 nm(EY-CPB体系)、516 nm(EY-CTAB体系),同时在548 nm(CPB体系)、544 nm(CTAB体系)处有吸收峰,在褪色波长处阳离子表面活性剂的浓度与褪色程度呈良好线性关系,从而建立测定阳离子表面活性剂的光度法。在最大褪色波长处,CPB体系、CTAB体系中CS的浓度在0~4.79×10-5mol/L、0~2.90×10-5mol/L范围内遵守比尔定律,表观摩尔吸光系数为2.94×104、2.86×104L.mol-1.cm-1,检出限为8.97×10-7mol/L、7.87×10-7mol/L。若用双波长叠加,表观摩尔吸光系数达5.58×104、5.20×104L.mol-1.cm-1,检出限为5.87×10-7、6.25×10-7mol/L。方法适用于水样中CS的测定。本文还用密度泛函理论对反应机理进行了探讨。     

溴甲酚紫、溴甲酚绿光度法测定阿昔洛韦

在pH 3.30的NH2CH2COOH-NaCl-HCl缓冲介质中,阿昔洛韦(Aciclovir,ACV)可与溴甲酚紫(BCP)、溴甲酚绿(BCG)反应,形成离子缔合物,溶液颜色发生明显变化,其最大褪色波长分别为428 nm(BCP-ACV)、450 nm(BCG-ACV),在此波长处,阿昔洛韦的浓度与溶液褪色程度呈良好线性关系,可用分光光度法测定。在BCP-ACV、BCG-ACV体系的最大褪色波长处,ACV的浓度分别在0~2.69×10-5mol/L、0~2.58×10-5mol/L范围内遵守比耳定律,表观摩尔吸光系数分别为2.53×104L.mol-1.cm-1、1.79×104L.mol-1.cm-1,检出限分别为5.10×10-7mol/L、7.13×10-7mol/L。方法用于药品、血浆及尿液中阿昔洛韦的测定,结果满意。     

依文思蓝光度法测定阿昔洛韦及其分析应用

在pH 5.74 HAc-NaAc缓冲介质中, 阿昔洛韦(ACV)与依文思蓝(EB)反应形成离子缔合物, 溶液颜色发生明显改变, 最大褪色波长为638 nm. 在此波长处, 阿昔洛韦的浓度与褪色程度呈良好线性关系, 从而建立测定阿昔洛韦的光度法. 在最大褪色波长处, 阿昔洛韦的浓度在0～2.01×10-5 mol/L范围内遵守比尔定律, 表观摩尔吸光系数1.71×104 L·mol-1·cm-1, 检出限为7.47×10-7 mol/L. 方法具有较高的灵敏度和良好的选择性, 可用于实际药品、血浆及尿液中阿昔洛韦的测定.     

多波长褪色分光光度法测定药物中的酒石酸美托洛尔

建立了测定药物中酒石酸美托洛尔的多波长褪色分光光度法,探讨了适宜反应条件、褪色光谱特征及共存物质的影响。在pH 5.66的Tris-盐酸缓冲介质中,酒石酸美托洛尔与固绿FCF反应生成具有3个负吸收峰(可见区)的二元离子缔合物,最大负吸收峰位于660 nm,另两吸收峰分别位于560 nm和426 nm,表观摩尔吸光系数(κ)分别为3.43×10~4(660 nm),2.53×10~4(560 nm)和2.57×10~4L/(mol·cm)(426 nm)。当用双波长或三波长叠加负吸收光谱法测定时,表观摩尔吸光系数分别可达5.96×10~4L/(mol·cm)(660 nm+560 nm)和8.53×10~4L/(mol·cm)(660 nm+560 nm+426 nm)。酒石酸美托洛尔的质量浓度在0.02~6.8 mg/L范围内服从朗伯-比尔定律。该方法用于市售酒石酸美托洛尔药物中酒石酸美托洛尔的测定,加标回收率为98.2%~102.7%,相对标准偏差RSD(n=6)为2.0%~2.3%。     

柠檬酸与乙酸酐混合溶液中分光光度法测定盐酸西布曲明

柠檬酸和乙酸酐混合溶液与盐酸西布曲明在80℃的水浴中加热30 min,反应后使溶液呈紫黑色,在330 nm波长处吸收最大,据此建立测定盐酸西布曲明的分光光度法.盐酸西布曲明的质量浓度在0.17～18.5 mg·L-1范围内遵守比耳定律,相关系数为0.998 9,表观摩尔吸光率为8.16×104L·mol-1·cm-1,检出限为61.5μg·L-1.用于曲美胶囊中盐酸西布曲明的测定,测定结果与高效液相色谱法结果相符,其相对标准偏差(n=6)值均小于0.5%.     

乙基紫褪色分光光度法测定药物中的美司那

建立了测定药物中美司那的褪色分光光度法。在酸性BR缓冲溶液中,美司那与乙基紫以静电引力作用生成具有2个较强负吸收峰的新物质,使溶液褪色,美司那的质量浓度在630 nm和492 nm处与生成的新物质的吸光强度的绝对值(|A|)有线性关系并服从朗伯-比尔定律,他们的线性范围为0.2～2.3 mg·L~(-1),表观摩尔吸光系数(κ)分别为1.71×10~4 L/(mol·cm)(492 nm)和2.53×10~4 L/(mol·cm)(630 nm),检出限分别为0.18 mg·L~(-1)和0.14 mg·L~(-1)。用双波长叠加法测定时,其表观摩尔吸光系数(κ)达4.24×10~4 L/(mol·cm),约是单波长法的2倍,检出限为0.080 mg·L~(-1)。该法用于市售美司那药物中美司那含量的测定,结果满意。     

双波长叠加吸收光谱法测定药物中的酒石酸美托洛尔

建立了快速、准确测定药物中酒石酸美托洛尔的双波长叠加可见吸收光谱法。在pH 4.55的酸性Tris-盐酸介质及586~740 nm波长范围内,偶氮氯膦Ⅲ与酒石酸美托洛尔反应生成具有两个明显正吸收峰的离子缔合物,最大正吸收波长位于614 nm,次大正吸收波长位于664 nm,表观摩尔吸光系数(κ)分别为6.03×10~4L/(mol·cm)(614 nm)和5.37×10~4L/(mol·cm)(664 nm),酒石酸美托洛尔的质量浓度在0.2~8.6 mg/L范围内服从朗伯-比尔定律,检出限为0.13 mg/L(614 nm)和0.15 mg/L(664 nm)。当采用双波长叠加法测定时,其表观摩尔吸光系数(κ)可达1.14×10~5L/(mol·cm),检出限为0.072 mg/L。该文同时探讨了显色反应的适宜条件、共存物质的影响及吸收光谱特征。实验发现,该反应体系的单波长及双波长叠加吸收光谱法的表观摩尔吸光系数可达5.37×10~4~1.14×10~5L/(mol·cm),方法可用于市售药物中酒石酸美托洛尔含量的测定,加标回收率为98.0%~101%,相对标准偏差(n=6)为1.8%~2.3%。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.