Integrated mode-evolution-based polarization rotators

For the first time to our knowledge, designs for mode-evolution-based integrated polarization rotators requiring only a pair of waveguide core layers are presented. Finite-difference time-domain and eigenmode expansion simulations demonstrate the near-ideal performance of the approach. In contrast with approaches based on mode coupling, no significant wavelength sensitivity is observed.     

Passive broadband silicon-on-insulator polarization splitter

We present the implementation of a novel wavelength independent polarization splitter on a silicon-on-insulator platform. The waveguide splitter is based on a zero-order arrayed waveguide grating (AWG) configuration. The splitting function is realized by employing cladding stress-induced birefringence. The device demonstrated a TE to TM splitting ratio better than -15 dB over a 20 nm tuning range centered around lambda=1550 nm and better than -10 dB over our entire accessible wavelength range from lambda=1465 nm to 1580 nm. The highest splitting extinction ratio achieved was -20 dB. To our knowledge, this is the first reported passive broadband polarization splitter based on AWG.     

Planar photonic crystal polarization splitter

The differential dispersion relation for the E and H modes (TM-like and TE-like, respectively) in planar photonic crystals is used to control the polarization-dependent propagation of light. E- and H-polarized beams were separated by 10 degrees after propagating through a 20-microm-long planar photonic crystal in the wavelength range from 1250 to 1300 nm. The plane-wave expansion calculation matches well with the experimental results. This result represents the first demonstration, to our knowledge, of a polarization splitter realized in a planar photonic crystal configuration in the near-infrared wavelength range operating solely in transmission mode.     

Self-collimating photonic crystal polarization beam splitter

We present theoretical and experimental results of a polarization splitter device that consists of a photonic crystal (PhC) slab, which exhibits a large reflection coefficient for TE and a high transmission coefficient for TM polarization. The slab is embedded in a PhC tile operating in the self-collimation mode. Embedding the polarization-discriminating slab in a PhC with identical lattice symmetry suppresses the in-plane diffraction losses at the PhC-non-PhC interface. The optimization of the PhC-non-PhC interface is thereby decoupled from the optimization of the polarizing function. Transmissions as high as 35% for TM- and 30% for TE-polarized light are reported.     

Ultracompact and fabrication-tolerant integrated polarization splitter

Design and fabrication of a 2×2 two-mode interference (TMI) coupler based on-chip polarization splitter is presented. By changing the angle between the access waveguides, one can tune the effective TMI length for the mode with less optical confinement (transverse magnetic, TM) to coincide with the target TMI length for a desired transmission of the mode with higher optical confinement (transverse electric, TE). The fabricated 0.94?μm long 2×2 TMI splits the input power into TM (bar) and TE (cross) outputs with splitting ratio over 15?dB over 50?nm bandwidth. Fabrication tolerance analysis shows that the device is tolerant to fabrication errors as large as 60?nm.     

An ultracompact hybrid plasmonic waveguide polarization beam splitter

We propose an ultracompact polarization beam splitter based on an asymmetric directional coupler, which comprises of a horizontally slotted waveguide and a hybrid plasmonic waveguide. The splitter is designed such that there is a large difference between the effective indices of the TE-polarized modes for the two waveguides, while the effective index difference between the TM-polarized modes are quite small in a wide wavelength range. Numerical results demonstrate that the proposed splitter with a short device length of 5 μm shows extinction ratios as low as ?20 dB with bandwidths as great as 100 nm.     

薄膜层数对偏振分束棱镜性能的影响

采用电子枪蒸镀离子源辅助技术,讨论了薄膜层数对偏振分束棱镜性能的影响.结果表明:随着薄膜层数的增加,p偏振光的透射率逐渐增大,s偏振光的透射率逐渐减小,p偏振光和s偏振光透射率的比值逐渐增大.     

Broadband integrated polarization beam splitter with surface plasmon

A broadband integrated waveguide polarization beam splitter consisting of a metal nanoribbon and two dielectric waveguides is proposed and numerically investigated. This surface plasmon based device provides a unique approach for polarization sensitive manipulation of light in an integrated circuit and will be essential for future classical and quantum information processes.     

新型高效偏振光分束器的设计

研究及分析了光波在分束结构中的传播行为和特性,发现当增大波导邻近两侧空气孔半径时,能形成完全光子禁带范围内某一频率光波单一偏振态的传播,基于此原理提出了一种全新结构的偏振光分束器,计算与模拟结构表明,该结构可以实现TE模与TM模高效大角度分离. 器件尺寸不超过17.6 μm×9.8 μm,在集成光回路中无疑有着很大的应用潜力. 关键词： 光子晶体 偏振光分束器 时域有限差分法 平面波展开法     

Integrated waveguide splitter fabricated by Cs-Na ion-exchange

This paper reports a optical power splitter fabricated by Cs⁺-Na⁺ ion-exchange in KF3 glass. The propagation loss of the waveguide is about 0.25 dB/cm derived from measured contrast ratio and 3 dB bandwidth.     

Ultra-compact polarization beam splitter based on photonic crystal waveguides

The authors design an ultra-compact all-PC-integrated polarization beam splitter which is only composed of three waveguides: one input waveguide and two output waveguides. The input waveguide can support both TM and TE modes, but one of the two output waveguides can only support TM modes while the other can only support TE modes. So an incident beam will be separated into two different polarization beams which emerge from different output waveguides. By the simulation of finite-difference time-domain method, we know that the polarization beam splitter really works the way as we predict.     

Switchable surface plasmon dichroic splitter modulated by optical polarization

For the miniaturization of optical devices, surface plasmon polaritons (SPPs) have been widely utilized due to their outstanding confinement and field‐enhancement characteristics. Analyzing a spectrum of optical signals and splitting certain regions of the spectrum range within a submicrometer‐scale structure are demanded for optical integrated systems. In this paper, a novel type of dichroic surface plasmon launcher that can switch the launching direction according to incident polarization states is demonstrated. Compared to the previously reported plasmonic dichroic splitters, the proposed schemes do not use any asymmetric geometry for directional launching. Hence, the direction of guided SPPs can be interchanged according to the polarization state. Such characteristics will be helpful to design switchable plasmonic devices that can be applied to active plasmonic integrated circuits.     

基于金属狭缝阵列的各向异性偏振分束器

在金属-电介质结构的基础上提出了一种基于金属狭缝阵列的各向异性偏振分束器,并采用有限元法研究了横磁(TM)和横电(TE)偏振光入射后结构所表现出的负反射和镜面反射等特性.计算结果表明,当偏振光的入射角设定在20?—70?时,入射的TM光发生强烈的负反射,而TE光的负反射很弱,并随着波长的增加而急剧下降.分析可得偏振分束光栅的理想负反射点和反射面的完美对称响应效果.通过仿真得到了理想负反射点的取值范围.结合严格耦合波法软件,计算不同偏振光入射时负反射和镜面反射条件下的反射率,其消光比高达10~6.     

Parallel-quadrature phase-shifting digital holographic microscopy using polarization beam splitter

We present a digital holography microscopy technique based on a parallel-quadrature phase-shifting method. Two π/2 phase-shifted holograms are recorded simultaneously using polarization phase-shifting principle, slightly off-axis recording geometry, and two identical CCD sensors. The parallel phase-shifting is realized by combining circularly polarized object beam with a 45° degree polarized reference beam through a polarizing beam splitter. DC term is eliminated by subtracting the two holograms from each other and the object information is reconstructed after selecting the frequency spectrum of the real image. Both amplitude and phase object reconstruction results are presented. Simultaneous recording eliminates phase errors caused by mechanical vibrations and air turbulences. The slightly off-axis recording geometry with phase-shifting allows a much larger dimension of the spatial filter for reconstruction of the object information. This leads to better reconstruction capability than traditional off-axis holography.     

基于自准直效应的光子晶体异质结偏振分束器

基于光子晶体的自准直效应和禁带特性,提出了一种具有非正交异质结结构的光子晶体偏振分束器.无需引入缺陷或波导,可使光波在该结构中准直无发散地传输并实现分束功能,对制造工艺的要求大大降低.利用Rsoft软件,结合平面波展开法和二维时域有限差分法,对提出的偏振分束器进行了仿真研究.结果表明,该偏振分束器在一个较大的频率范围f=0.275—0.285(a/λ)内可实现横电(TE)和横磁(TM)模的大角度偏振分离,TE和TM模的透过率均在88%以上,偏振消光比分别大于26.57 dB和17.50 dB.该结构可应用到太赫兹波段的传输系统中,a=26μm,尺寸大小为572μm×546μm,在91—95μm波长范围内可实现TE和TM模的分离.利用该结构可设计用于光通信系统(n=3.48)的偏振分束器,a=426.25 nm,结构仅为9.38μm×8.95μm.本方案结构简单,易于集成,有望在集成光路的发展中发挥重要作用.     

A compact polarization splitter utilizing directional coupler with left-handed material

A compact polarization splitter (PS) with left-handed material (LHM) sandwiched between two right-handed material (RHM) waveguides of a directional coupler (DC) is proposed. Its operation is by setting the coupling length of TM polarization be half that of TE polarization. Theoretic analysis exhibits that the PS with a very small size of 138.4 μm × 18.6 μm can be realized due to the inclusion of LHM even when the RHM with small birefringence is used.     

Double-wavelength polarization insensistive beam splitter used in optical storage technology

Device to read/write data from optical storage units have polarization insensitive character at two separated wavelength. Based on a key four-layer structure and some matching layers, an initial thin film stack system is constructed. After optimized alternately by simplex and conjugate graduate algorithm, a double- wavelength polarization insensitive beam splitter with splitting ratio of R ： T=50：50 at 650-nm wavelength and T ≥ 93% at 780-nm wavelength is gained. The design result shows that the difference between reflectivity of P and S light around wavelength range of 630-670 and 760-800 nm with incident angle of 40~-50~ is all very little. That indicates our design controls the polarization deviation well at two separate wavelengths with a reasonable range for both wavelength and incident nn~l~