Cd同位素地质样品的预处理方法研究

考察了文献报道的地质样品中Cd同位素测试前的化学分离纯化和富集方法(预处理方法)中的离子交换树脂单柱法回收率低的原因,并在该方法的基础上做了改进,优化了离子交换柱的洗涤顺序和洗液用量.改进后的离子交换树脂单柱法Cd回收率达99.82%,主要干扰元素(Sn、In、Zn、Pb)和基质元素的去除效果均较理想,能更好地满足Cd同位素的测定要求.     

浓缩钼同位素的纯化新方法及质量分馏测定

基于三氧化钼易升华的特性,建立了一种纯化浓缩钼同位素试剂的新方法.采用天然丰度掺杂样品Synthetic-Mo对纯化过程中的氧化时间、样品加入量及真空蒸发温度等条件进行了优化.用高分辨等离子体质谱分析了样品中杂质的含量,计算得到纯化后95Mo和98Mo浓缩同位素试剂的纯度分别为99.992%和99.990%.通过多接收器等离子体质谱测定纯化前后样品中钼同位素的组成,δX/95Mo(X=92,94,96,97,98,100)值均在仪器测量精度(0.3‰)范围之内,未观察到明显的质量分馏现象.该方法能够满足校正质谱法对浓缩同位素试剂的要求,对建立高准确度的钼同位素丰度比测量方法具有重要意义.     

海水中溶解态硝酸盐的氮同位素分析的预处理方法

建立了一套适合海水中溶解态硝酸盐的氮同位素分析的预处理方法.以蒸馏为基础,先去除海水样品中的NO-2-N和NH+4-N,然后加入达氏合金将海水样品中的NO-3-N还原为NH+4-N,并通过蒸馏富集,馏出液用沸石吸附后,经过滤等步骤,送入同位素质谱仪检测15N.研究了预处理过程中的蒸馏条件、盐度影响、沸石吸附效率以及大体积水样预处理方法的改进等.结果表明,每300 mL水样中加入0.5 g达氏合金在强碱性条件下蒸馏30 min,氮回收率平均可达(104.9±4.2)%(n=6);当盐度从0%增加至0.5%时,同位素分馏程度迅速减小盐度再增大时(1%～3.5%),同位素分馏变化不明显.沸石对铵氮的平均吸附率较高,约为(95.96±1.08)%(n=6);处理大体积水样时多次蒸馏并改进了馏出液的收集方式,实验效果较好.应用此方法对长江口海域水样进行了分析,结果表明,这一方法可以应用于海水中溶解态硝酸盐的氮同位素分析,为海水中溶解态氮的来源问题及循环机理研究等提供了有效信息.     

低硼富含有机质的河/雨水正热电离硼同位素的测定

对低硼富含有机质的河/雨水样品硼的分离方法及硼同位素组成的测定进行了研究.采用硼特效树脂富集河/雨水样品,结合微升华技术去除有机质;采用正热离子质谱法进行硼同位素组成的测定.全流程回收率在97.50%～101.17%之间,测试数据和多接受电感耦合等离子体质谱比较接近,测试精度小于0.05‰.经本方法处理后的样品能满足同...     

气相色谱-质谱分析血清葡萄糖的前处理方法研究

用气相色谱-同位素稀释质谱法(GC-ID/MS)测定血清葡萄糖,需要对血清样品进行前处理,为确保测定结果的准确性,比较了乙醇、丙酮、乙腈沉淀及微过滤4种去除蛋白的方法.将用上述4种方法处理的血清样品进行衍生,采用GC-ID/MS测定,得到其精密度、相对回收率和绝对回收率,加以比较.结果表明:4种方法中,乙醇去除血清中蛋白的效果最佳.     

ICP-MS技术快速测量尿样中的铀同位素

核事故状态下的应急处理要求对环境介质中的放射性核素进行快速分析。尿样中铀同位素测量作为内照射剂量评价的主要手段,其分析效率越高,则对核事故中涉铀人员的安全救治越及时、有效。尿样中其他无机离子的含量是铀含量的106倍,导致ICP-MS测量过程中尿盐堵塞进样毛细管。为降低样品的含盐量并获得较好的检测结果,本文对样品预处理过程进行优化。采用先加热氧化去除有机物,再进行1~10倍稀释后测试样品的铀同位素丰度及浓度。结果表明,将25m L样品稀释至100m L后效果最佳,分析方法相对标准不确定度为5.4%,回收率95%~105%。     

尿样中铀同位素的ICP-MS快速测量技术研究

核事故状态下的应急处理,要求对环境介质中的放射性核素进行快速分析。尿样中铀同位素测量作为内照射剂量评价的主要手段,其分析效率越高,则对核事故中涉铀人员的安全救治越及时、有效。而尿样中其它无机离子是铀含量的106倍,导致ICP-MS测量过程中尿盐堵塞进样毛细管。为降低样品的含盐量并获得较好的检测结果,本文对样品预处理过程进行优化。采用先加热氧化去除有机物,再进行1～10倍稀释后测试样品的铀同位素丰度及浓度。结果表明：将25 mL样品稀释至100 mL后效果最佳,分析方法不确定度为5.4 %,回收率95 %~105 %。     

植物样品中低水平铀同位素分析

建立了一种植物样品中痕量铀同位素(~(238)U、~(235)U和~(234)U)的分析方法。通过高温灰化去除植物样品中有机质,采用混合酸消解样品灰分,应用UTEVA萃取色谱分离和纯化铀。化学分离过程中铀的回收率达94%,对Na、K、Ca等基体和干扰元素的去除率超过99%。用高灵敏度ICP-MS/MS同时测定了3种天然铀同位素含量,对~(238)U、~(235)U、~(234)U的检出限分别为3.05、0.34和0.04 pg/g,其中对~(238)U和~(235)U的检出限比文献报道值低1个数量级。对小麦粉标准参考物质中~(238)U的分析结果与参考值吻合,表明本分析方法可靠。将本方法应用于中国西安地区植物样品中铀同位素的分析,结果表明,该地区植物中铀含量和铀同位素比值处于天然水平,未发现人为铀污染。这是中国植物样品中3种天然铀同位素水平的首次调查。     

二噁英、多溴联苯醚和多氯联苯同时测定方法的研究

本实验以美国环保署1613B、1614和1668A等标准方法为基础,建立了同一样品中二噁英、多溴联苯醚和多氯联苯的同位素稀释-多层色谱柱净化-高分辨气质联用-高通量同时分析方法.该方法利用弗罗里土对二噁英组分吸附能力强的特点,采用不同极性的溶剂淋洗,先实现二噁英组分和其它两个组分的分离,再利用多溴联苯醚更易保留在硝酸银硅胶(10%)柱上的特点,实现了多溴联苯醚和多氯联苯两类化合物的分离.实验优化了样品前处理过程,纯化过程中去除了大量干扰物质,同时将三类化合物在前处理中进行分离,消除了相互干扰,实现了准确定量.纯化效果和检测限均符合美国环保署相关标准的要求.通过标准参考物的比对和实际样品的分析验证了方法的可靠性和结果的准确性.     

碳酸盐岩钙同位素化学分离方法改进及其在青藏高原地质样品中的应用前景

本文报导了在前人基础上改进的碳酸盐岩(白云石－方解石)地质样品钙同位素化学分离方案。通过对比云南永善桧溪剖面白云岩－灰岩过渡岩性在不同浓度盐酸下淋洗结果,确定了4N浓度盐酸能有效富集白云石－方解石体系中的钙元素,且热电离质谱(TIMS)测试结果显示4N盐酸与1.6N盐酸淋洗方案处理后钙同位素测试结果一致,表明在相同测试精度的情况下,针对白云石－方解石体系下碳酸盐岩地质样品化学分离方案能提高化学分离效率。本文进一步结合青藏高原研究热点问题,对钙同位素在青藏高原地质样品的应用前景进行了分析,分析表明,钙同位素在青藏高原隆升前古海洋环境重建、隆升期构造活动恢复及隆升后火成岩来源示踪上具有广泛应用前景。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.