Glass transition temperatures of some linear polymers containing phenyl side groups

The glass transition temperatures of a number of poly(vinyl phenyl ketones), poly-(vinyl benzoates), and poly(phenyl acrylates) have been measured by a refractometric method. The effects exerted on T_g by the nature and position of the ring substituents and by the different groups binding the pendant phenyl rings to the polyvinyl chain are discussed. The importance of knowledge of the side-group motions in the glassy state for the interpretation of glass temperature data is emphasized.     

Organosilane polymers: Formable polymers containing reactive side groups

Formable organosilane polymers containing various reactive side groups were synthesized by hydrosilylation of unsaturated compounds containing reactive groups with poly(methylsilane) in the presence of platinum complexes. These polymers have appreciable solubility in common solvents, can be molded or cast into films or drawn into fibers, and are photoactive.     

Comparative study of the mechanical relaxation behavior of polymethacrylates containing different bulky side groups

The syntheses of poly(1,3‐dioxan‐5‐yl methacrylate), poly(cis‐2‐phenyl‐1,3‐dioxan‐5‐yl methacrylate), poly(trans‐2‐phenyl‐1,3‐dioxan‐5‐yl methacrylate), poly(cis‐2‐cyclohexyl‐1,3‐dioxan‐5‐yl methacrylate), and poly(trans‐2‐cyclohexyl‐1,3‐dioxan‐5‐yl methacrylate) are reported. The mechanical relaxation spectrum of the simplest polymer, poly(1,3‐dioxan‐5‐yl methacrylate), exhibits a prominent β relaxation centered at ?98 °C, at 1 Hz, followed in increasing order of temperature by an ostensible glass–rubber relaxation process. In addition to the β relaxation, the loss curves of poly(trans‐2‐phenyl‐1,3‐dioxan‐5‐yl methacrylate) and poly(trans‐2‐cyclohexyl‐1,3‐dioxan‐5‐yl methacrylate) display in the glassy state a high activation energy relaxation, named the β* process, that seems to be a precursor of the glass–rubber relaxation of these polymers. The mechanical spectra of poly(trans‐2‐cyclohexyl‐1,3‐dioxan‐5‐yl methacrylate) and poly(cis‐2‐cyclohexyl‐1,3‐dioxan‐5‐yl methacrylate) exhibit a low activation energy process in the low‐temperature side of the spectra, which is absent in the other polymers. The molecular origin of the mechanical activity of these polymers in the glassy state is discussed in qualitative terms. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1154–1162, 2002     

Low-temperature mechanical relaxations in polymers containing aromatic groups

Studies have been made of the secondary relaxation processes in the solid state of a number of polymers containing aromatic groups in the polymer chain. The polymers investigated include one, polystyrene, with the aromatic group in side-chain positions, and six high polymers in which phenylene rings lie in the main backbone chain. In polystyrene, wagging and torsional motions of the side chain phenyl rings give rise to a low-temperature δ-relaxation which is centered at 33°K (1.7 Hz) and which has an activation energy of about 2.3 kcal/mol. Most of the polymers with phenylene rings in the main chain exhibit a low-temperature relaxation in the temperature region from 100°–200°K. This relaxation process is centered at 159°K (0.54 Hz) in poly-p-xylylene, at 162°K (0.67 Hz) in polysulfone, and at 165°K (1.24 Hz) in poly(diancarbonate). In poly(2,6-dimethyl-p-phenylene oxide), two overlapping low-temperature relaxations are found, one in the range 125–140°K and the other near 277°K (ca. 1 Hz). The low-temperature secondary relaxation process in all of these polymers is believed to be associated with local reorientational motion of the phenylene, or substituted phenylene, rings or with combined motion of the phenylene rings and nearby chain units. For these low temperature relaxation processes, the activation energy is about 10 kcal/-mole. The temperature location of the relaxation appears to depend on the specific units to which the phenylene rings are attached and on steric and polar effects caused by substituents on the ring. In the poly-p-xylylenes the relaxation is shifted to much higher temperatures by a single Cl substitution on the ring but remains at essentially the same temperature position when dichlorosubstitution is made. The effects of water on the magnitude and temperature location of the observed low temperature relaxations, as well as the implications of the study for other polymers containing aromatic groups in their backbone chains, are discussed.     

侧基含偶氮基的硅氧烷梳状聚合物的光致变色性

本文研究了对十一烯酰胺基偶氮苯及其硅氧烷均聚、共聚的梳状聚合物在溶液或薄膜状态下的光致变色性和热回复性。它们的反、顺异构体组分比随光照时间趋于某稳定值, 该稳定的组分比与照射光波长有关。光异构反应是可逆的。比较了异构反应速率和异构转换率, 以聚硅氧烷共聚物PSII3A[侧基比(M1/M2)=1/9, M1是对十一烯酰基偶氮苯, M2是对十一烯酰氧对氧基苯酯]为最佳。升高温度能增进热回复异构。     

Conductivity of nonaqueous solutions of aromatic polymers containing ionizable side groups

The concentration dependence of the equivalent conductivity has been measured for dilute DMAc solutions of K, Na, and Li salts of aromatic polymers with ionizable side groups [poly(diphenylenesulfophthalide) and poly(arylene ether ketone) with side COOH groups]. A correlation between the concentration dependences of the equivalent conductivity and reduced viscosity shows that the first parameter initially sharply decreases with an increase in concentration and then achieves a limiting value at a rather low concentration and that precisely in this concentration range the polyelectrolyte effect manifests itself in the concentration versus reduced viscosity curve. With an increasing amount of metal ions incorporated into the polymer, the equivalent conductivity grows. It was demonstrated that the type of counterion affects the reduced viscosity and equivalent conductivity of salt solutions. This effect depends on the structure of the polymer backbone: for poly(arylene ether ketone) salts, the reduced viscosity and the equivalent conductivity increase in the sequence Li → Na → K, while for poly(diphenylenesulfophthalide) salts, the reduced viscosity increases in the reverse order and the equivalent conductivity remains almost invariable. The limiting values of the equivalent conductivity and the degree of association of polyelectrolytes have been estimated in terms of the Arrhenius-Ostwald theory. It has been shown that, in the case of poly(diphenylenesulfophthalide) salts, the equivalent conductivity and the degree of association are higher than those for poly(arylene ether ketone) salts with side COOH groups. This finding is indicative of a stronger binding of counterions by poly(arylene ether ketone).     

Thermal effects on liquid-crystalline order in polymers with mesogenic side groups

X-ray studies on polymers with phenyl benzoate side groups separated from the main chain by spacer groups of various lengths have been performed. It was found that the dimensions of liquid-crystalline regions are 15–20 nm, and they contain four to six close-packed layers. Thermal changes in x-ray scattering are associated with the variation of sizes and concentration of liquid-crystalline regions determined by the mobility of the main chain.     

Photoinduced chirality in achiral liquid crystalline azobenzene polymers containing different polar side groups

Circular dichroism (CD) was induced in the films of two achiral liquid crystalline polymers, poly[(4′-(6-(methacryloyloxy)hexyl)oxy)-(4-X)azobenzene] (PM6X, X = C and N for cyano and nitro, respectively), by irradiation with one handed circularly polarized light (CPL) at 442 nm. The CD and UV spectra of the polymeric films suggest that left-CPL induces a left helical structure and right-CPL reverses the resulting structure into a right helix. For PM6C, the photoinduced CD values of the nematic film are much higher than in the casting and isotropic film. The photoinduced chirality of PM6C films is higher than PM6N due to a higher polarity of nitro groups in PM6N. The PM6N’s CD intensity around 450 nm is increased with the irradiation time of linearly polarized light (LPL) followed by left-CPL irradiation. The correlation between azobenzene chromophores and circularly polarized light will be discussed in the paper.     

Metallorganic side group liquid crystalline polymers containing pi-allylpalladium(II) groups

The preparation and phase properties of some LC pi-allyl and pi-crotyl Pd(II) side group metallorganic polymers and some related salicylaldiminates are described. The LC acrylate functionalized monomers are easily prepared, but their use to obtain the corresponding polymers by radical reaction failed because extensive decomposition of the complexes occurs with the formation of Pd metal. The synthesis of the metallated polymers was therefore performed by reacting the dimeric chloro-bridged organometallic pi-allyl or pi-crotyl Pd(II) complexes with the appropriate ligand polymer which is prepared without difficulties. The organometallic polymers show a nematic mesophase, while the ligand polymer exhibits a smectic A or C phase. Both metallated low molecular mass model compounds and the polymers give stable mesophases, although at lower temperatures compared with the parent ligand compounds.     

Synthesis and characterization of polymers containing linear sugar moieties as side groups

The synthesis of a water-soluble monomer, namely 4-vinylphenyl-d-gluco(d-manno)hexitol (4) derived from d-gluconolactone, is here presented. The homopolymerization of the vinylsugar has been conducted in both aqueous and organic media using free-radical initiators. High-molar-mass water-soluble polymers are obtained. The copolymerization behavior of the vinylphenyl sugar monomer with a hydrophilic monomer such as acrylamide, as well as with a hydrophobic monomer such as styrene, has been investigated. Statistical- and block-type copolymers have thus been prepared. The structures of the polymers were confirmed by NMR and their thermal properties examined by DSC.     

Plasma polymers containing sulfonate groups

Modification of plasma-polymers prepared from phenylsilane with sulfur trioxide was investigated by FT/IR spectroscopy and ESCA. The sulfonation of phenyl groups in the plasma-polymers occurred rapidly within 1 min when exposed to SO₃ gas. The S/C and O/C atomic ratios determined by ESCA for the modified polymers were 0.13₈ and 0.41₈, respectively. The sulfonation made the plasma-polymers electrically conductive. The conductivity was sensitive to moist atmosphere. The logarithm of the impedance at 120 Hz decreased linearly with increasing the relative humidity. The plasma-films containing sulfonate groups may be a new material for moisture sensor devices.     

Crosslinked polymers containing adamantane groups

Diglycidyl ethers of 1,3-bis-(p-hydroxyphenyl)adamantane (BHPA) and 3,3'-bis-(p-hydroxyphenyl)-1,1'-biadamantane (BHPBA) were prepared and condensed with m-phenylenediamine and methyl tetrahydrophthalic anhydride to give polymers with good high temperature mechanical properties and good oxidative stability. These bisphenols were also condensed with formaldehyde to give phenolic resins containing adamantane moieties.     

Dynamic mechanical relaxation effects in some poly(arylene sulfones)

Poly-4,4′-oxydiphenylenesulfonyl and poly-4,4′-methylenediphenylenesulfonyl were synthesized by an electrophilic substitution polymerization of the arylene monosulfonyl chloride monomers. The glass-transition temperatures T_g of these polymers were determined by calorimetric and dynamic mechanical measurements, and the number-average molecular weights were determined by vapor-pressure osmometry. Both polymers were found to have the same T_g at equivalent molecular weight; the limiting value at high molecular weight is 238°C. Both polymers have two dynamic mechanical relaxation peaks at temperatures far below T_g. One is in the neighborhood of 0°C, and the other is at ?110°C. Plausible origins for these relaxations, and the absence of any near 0°C in poly(4,4′-isopropylidenediphenylene-co-4,4′-sulfonyldiphenylene dioxide), are discussed.     

Relaxation response of polymers containing highly flexible side groups monitored by broadband dielectric spectroscopy

The relaxation behavior of poly(5-acryloxymethyl-5-methyl-1,3-dioxacyclohexane), a polymer containing highly flexible side groups, is studied by broadband dielectric spectroscopy in the frequency and temperature ranges 10(-1)-10(9) Hz and 123-473 K, respectively. Above the glass transition temperature T(g) the dielectric loss in the frequency domain exhibits a prominent alpha absorption, followed in increasing order of frequencies by two secondary absorptions called beta and gamma. At temperatures slightly higher than T(g), the a relaxation is well separated from the beta, but as temperature increases overlapping between both relaxations augments forming an alphabeta absorption in the vicinity of 420 K. This latter absorption displays a shoulder on its high-frequency side corresponding to the y relaxation. The strength of the a relaxation decreases with increasing temperature, eventually vanishing at the temperature at which the alphabeta absorption is formed. The time retardation spectra of the isotherms are calculated and further used to facilitate the deconvolution of the overlapping relaxations. The fact that the temperature dependence of the beta relaxation also describes that of the alphabeta absorption suggests that both relaxations have the same nature. It seems that as temperature increases, the a relaxation feeds on the beta absorption until its complete disappearance. The gamma relaxation, in turn, seems to increase at the expense of the alphabeta process at high temperature.     

On some mechanical effects in glassy polymers attributed to chain entanglements

The important role of the entanglements in the deformation of high-molecular-weight glassy polymers is demonstrated by two phenomena: the build-up of material resistance in polymethylmethacrylate after chain interpenetration and the intrinsic crazing of polycarbonate which is observed when the entanglement network reaches its limits of extension.Dedicated to Prof. Dr. F. H. Müller.     

Synthesis and X-ray investigation of liquid crystalline polymers containing laterally methyl-substituted tolane-based mesogenic side groups

A series of polymethacrylates containing laterally methyl-substituted 4-alkoxy-4-nitrotolane, 4-alkoxy-4'-cyanotolane, and 4-alkoxy-4'-trifluoromethyltolane as mesogenic side groups are presented. The thermal behaviours of the prepared compounds were characterized by differential scanning calorimetry, optical polarized microscopy and X-ray diffraction. All of the obtained methacrylate monomers exhibit no mesophase, while most of the synthesized polymers reveal enantiotropic mesomorphism. The polymer containing 4-propyloxy-2'-methyl-4'-nitrotolane side groups was the only one to show no mesomorphic behaviour. The spacer length and the nature of terminal group have a profound influence on the type of mesophase formed and the thermal stability. Incorporation of a lateral methyl-substituent into the mesogenic groups reduces the thermal stabilities of the mesophases. X-ray diffraction reveals that polymers with a smectic A or smectic E phase have the inclination to form a bilayer structure. Increasing the temperature within the smectic phase range, the intermolecular spacing increases while the layer spacing decreases. On the other hand, introducing a lateral substituent into the mesogenic side groups leads to increase in both layer and intermolecular spacing.     

Intramolecular liquid-crystal order in polymers with chain side groups

Hydrodynamic, optical and electro-optical properties of solutions of polyphenyl methacrylic esters of cetyl and nonyl oxybenzoic acids and of random copolymers of the C₁₆ ester with cetyl methacrylate have been investigated.Experimental data show that the molecules of these polymers exhibit intramolecular orientationalpolar order of a mesomorphic type in which the side-chains form a mobile liquid-crystalline structure. The intramolecular mesomorphic state is due to the side chain radical containing groups capable of forming thermotropic nematic liquid crystals.     

Ionic polypseudorotaxanes containing photophysically active side groups

The formation of polypseudorotaxanes in the poly(2-acrylamido-2-methylpropanesulfonic acid)-α-cyclodextrin-ionogenic surfactant system has been studied by NMR and UV spectroscopy, dynamic light scattering, and viscometry. These products form due to the combination of hydrophobic and ionic interactions. The incorporation of a photophysically active group into a low-molecular-mass amphiphilic compound makes it possible to trace complexation in solution.