去叔丁基杯[8]芳烃乙酸钠对紫杉醇包合作用的研究

采用紫外分光光度法和荧光光谱法研究去叔丁基杯[8]芳烃乙酸钠对紫杉醇的包合和释放过程,考察了二者物质的量之比、温度等因素对包合作用的影响.结果显示去叔丁基杯[8]芳烃乙酸钠在一定条件下与紫杉醇可形成稳定的超分子包合物,包合后水溶性明显提高,且随着去叔丁基杯[8]芳烃乙酸钠/紫杉醇物质的量之比的增加,荧光强度明显增强.去叔丁基杯[8]芳烃乙酸钠今后有望成为紫杉醇类抗肿瘤药物的良好载体.     

25-[(乙氧基羰基)甲氧基]-26,27,28-三丁氧基对叔丁基杯[4]芳烃的合成

以对叔丁基杯[4]芳烃为起始原料,合成了25-羟基-26,27,28-三丁氧基对叔丁基杯[4]芳烃(2)和25-[(乙氧基羰基)甲氧基]-26,27,28-三丁氧基对叔丁基杯[4]芳烃(3),2和3的结构经1HNMR和IR表征。通过正交实验[L16(45)和L9(33)]优化了实验条件,使3的总收率提高到60%。     

杯芳烃与NO2硝化反应的研究

系统地研究了羟基杯[n]芳烃、甲氧基杯[n]芳烃和对特丁基杯[n]芳烃(n＝4, 6, 8)与NO₂气体的硝化反应, 发现可以成功地得到25,26,27,28-四羟基杯[4]芳烃、37,38,39,40,41,42-六羟基杯[6]芳烃以及25,26,27,28-四甲氧基杯[4]芳烃的对位全硝化产物, 产率分别为90%, 70%和40%; 尤其是25,26,27,28-四羟基杯[4]芳烃与NO₂的反应20 min即可完成. 认为共振式酚氧负离子结构是影响该类硝化反应的关键, 并对反应机理进行了探讨.     

对叔丁基杯芳烃与稀土配合物的合成表征及抑菌活性

合成了对叔丁基杯[6]芳烃(H6L)及对叔丁基杯[8]芳烃(H8L′)与稀土RE(La,Sm和Tb)的配合物,通过元素分析、红外光谱进行表征,研究了这些配合物对高山红景天立枯丝核菌(Rhizoctonia solai Kuhn)和尖孢镰刀菌(Fusarium oxyporumSchlecht)的抑菌活性.结果表明,其配合物组成分别为[RE(H4L)(DMF)4(OH)].H6L和[RE(H6L′)(NO3)(DMF)4].2DMF(RE=La,Sm,Tb;H4L为电离出两个H 的H6L;H6L′为电离出两个H 的H8L′).配合物对这两种真菌均有较好的抑菌效果,浓度高则抑菌能力强,杯[8]芳烃稀土配合物的抑菌能力较杯[6]芳烃稀土配合物强.     

新型对叔丁基杯[4]芳烃1,3-二酮衍生物的合成

以对叔丁基苯酚为起始原料,经聚合反应得对叔丁基杯[4]芳烃(2);2经醚化和缩合反应合成了一个新型的对叔丁基杯[4]芳烃1,3-二酮衍生物,其结构经1H NMR,13C NMR和MS表征。     

手性杯[4]丝氨酸衍生物的合成及其催化性能

以对叔丁基苯酚为原料,经环化缩合、脱叔丁基、酚羟基醚化、甲酰化和氧化反应制得5-羧基-25,26,27,28-四正丙基杯[4]芳烃(5);5与O-苄基-N-苄氧羰基丝氨酸反应制得5-(O-丝氨酸)-25,26,27,28-四正丙基杯[4]甲酸酯(7),其结构经~1H NMR,~(13)C NMR和MS(ESI)表征。研究了溶剂和水的用量对7催化性能的影响。结果表明:水为溶剂,其用量为10 eq.时,收率和非对映选择性分别为95%和3∶97 dr;当水的用量为30 eq.时,收率和非对映选择性分别为93%和98∶2 dr。     

超声波辐射法合成对叔丁基杯[8]芳烃酯类衍生物

在超声辐射条件下,以对叔丁基杯[8]芳烃为原料,采用氯乙酸乙酯为烃基化试剂,KI为离子交换剂,在K2CO3/丙酮体系中进行衍生化反应可高效制备对叔丁基杯[8]芳烃乙酸乙酯基衍生物;讨论了超声功率、反应时间、原料摩尔配比及催化剂等因素对收率的影响.实验结果表明：使用200 W的超声功率,氯乙酸乙酯过量50%,反应时间为25 min时,精制后杯芳烃酯类衍生物收率达到82.2%.     

偶氮和亚氨基团作为下垂螯合臂的新型杯[4]芳烃衍生物的合成及性质

以对叔丁基杯[4]芳烃为原料,经过取代、缩合等多步反应,合成了5个下缘同时含有偶氮和亚氨基团的新型杯[4]芳烃衍生物,其结构经IR、1H NMR、13C NMR和元素分析进行了表征.并通过UV/Vis光谱研究了其对金属离子的识别作用.结果发现化合物25,27-二羟基-26,28-二{2-[2-(N-(4-苯偶氮基-1-萘基)亚氨基次甲基)苯氧基]乙氧基}对叔丁基杯[4]芳烃(4c)对Al3+和Sn2+有较好的识别作用,而化合物25,27-二羟基-26,28-二{2-[2-(N-(4-(4-甲基苯偶氮基)-1-萘基)亚氨基次甲基)苯氧基]乙氧基}对叔丁基杯[4]芳烃(4e)可以专一性地识别Al3+,其与Al3+络合的物质的量比为1∶1.     

新型杯[4]芳烃氨基苯酚类衍生物的合成及对La3 的选择性识别

设计合成了下缘连有氨基苯氧基结构的杯[4]芳烃衍生物:5,11,17,23-四叔丁基-25-[2-(2-氨基苯氧基)乙氧基]-27-(2-羟基乙氧基)-26,28-二羟基杯[4]芳烃(化合物C),增加了与阳离子的结合位点,有利于通过配位作用对金属离子进行识别。化合物C的结构通过红外光谱、1H NMR、13C NMR和质谱进行了表征。通过紫外可见光谱和荧光发射光谱对化合物C与24种金属阳离子的络合作用进行了研究,结果发现,其对La3+有特殊的识别作用,化合物C与La3+的络合比为1∶1。     

5,11,17,23-四叔丁基-25,26,27,28-四[3-(甲氧基羰基)苄氧基]杯[4]芳烃包合性能的研究

杯芳烃是继冠醚和环糊精后的第三代主体化合物 .这类主体分子不仅可以识别和络合阳离子 ,而且还具有包合中性有机分子的性能 [1～ 5] .杯 [4]芳烃类包合物的晶体结构测定表明 ,它们可分为分子内和分子间包合两种类型 [3 ,5] ,前者是客体分子被包合在主体分子的空穴内 ,后者是客体分子被包合在主体分子之间 .对叔丁基杯 [4]芳烃的下沿酚氧基与上沿均可进行化学修饰得到不同的杯 [4]芳烃衍生物 .最早报道的对叔丁基杯 [4]芳烃及其衍生物的分子内包合物是与甲苯或乙腈的 1∶ 1包合物 [4 ,5] ,客体分子依靠 CH3 -π的作用被包结在主体分子内[6]…     

ABSORPTIVE IONOPHORES FOR Fe3+ CATION BY PARENT CALIX[n]ARENES

The absorption of Fe³⁺ ion from the aqueous phase to the solid phase was carried out by using p-tert-butyl calix[6]arene (L₁), calix[6]arene (L₂), p-tert-butyl calix[8]arene (L₃), and calix[8]arene (L₄). The effect of varying pH upon the absorption capability of parent calixarenes was examined. It was found that the compounds (L₁, L₂, L₃, and L₄) showed the highest extractability toward Fe³⁺ ion at 4.5–5.4. The calixarene L₂ shows a strong binding ability to Fe³⁺ ion. Based on the continuous variation method, calixarene L₂ formed 1:1 complex with Fe³⁺ ion.     

Synthetic and NMR Studies on Calix[n]Arene (n = 4,6,8) Triflates,Mesylates, and Tosylates

Abstract

The synthesis and full characterization of eight new calix[n]arene sulfonate esters including their conformational analysis were carried out. While p-tBucalix[6]arene and p-tBu-calix[8]arene esters are conformationally labile in the temperature interval of 25–100°C, p-tBu-calix[4]arene mono-and diesters were isolated as stable conformers at ambient temperature. Two 1,3-functionalised compounds of these derivatives, p-tert-butylcalix[4]arene ditriflate (5) and dimesylate (6) were shown unexpectedly high conformational stability up to 100°C by dynamic NMR measurements. The NMR measurements confirm the pinched-cone conformation for both derivatives. For the dealkylated calix[4]arene derivatives the partial cone conformer of the triesters have been obtained as major products in all cases.     

Synthesis and crystal structure of uranium(IV) complexes with calix[n]arenes (n = 4, 6 and 8): mononuclear, polynuclear and 1D polymeric species

Reactions of UCl4 with calix[n]arenes (n = 4, 6) in THF gave the mononuclear [UCl2(calix[4]arene - 2H)(THF)2].2THF (.2THF) and the bis-dinuclear [U2Cl2(calix[6]arene - 6H)(THF)3]2.6THF (.6THF) complexes, respectively, while the mono-, di- and trinuclear compounds [Hpy]2[UCl3(calix[4]arene - 3H)].py (.py), [Hpy](4)[U2Cl6(calix[6]arene - 6H)].3py (.3py), [Hpy]3[U2Cl5(calix[6]arene - 6H)(py)].py (.py) and [Hpy]6[U3Cl11(calix[8]arene - 7H)].3py (.3py) were obtained by treatment of UCl4 with calix[n]arenes (n = 4, 6, 8) in pyridine. The sodium salt of calix[8]arene reacted with UCl4 to give the pentanuclear complex [U{U2Cl3(calix[8]arene - 7H)(py)5}2].8py (.8py). Reaction of U(acac)4 (acac = MeCOCHCOMe) with calix[4]arene in pyridine afforded the mononuclear complex [U(acac)2(calix[4]arene - 2H)].4py (.4py) and its treatment with the sodium salt of calix[8]arene led to the formation of the 1D polymer [U2(acac)6(calix[8]arene - 6H)(py)4Na4]n. The sandwich complex [Hpy]2[U(calix[4]arene - 3H)2][OTf].4py (.4py) was obtained by treatment of U(OTf)4 (OTf = OSO2CF3) with calix[4]arene in pyridine. All the complexes have been characterized by X-ray diffraction analysis.     

Study on the inclusion interaction of p-sulfonated calix[n]arenes with Vitamin K3 using methylene blue as a spectral probe

The characteristics of host-guest complexation between p-sulfonated calix[n]arene (SCnA, n = 4, 6) and Vitamin K(3) (VK(3)) were investigated by fluorescence spectrometry and absorption spectrometry using methylene blue (MB) as a probe. Interaction with MB and SCnA led to an obvious decrease in fluorescence intensity of MB, accompanying with shifts of emission peaks. Absorption peaks also showed interesting changes; however, when VK(3) was added, fluorescence intensity and absorbance recovered and a slight and slow red shift was observed. The obtained results showed that the inclusion ability of p-sulphonated calix[n]arenes towards VK(3) was the order: p-sulphonated calix[6]arene (SC6A) >p-sulphonated calix[4]arene (SC4A). Relative mechanism was proposed to explain the inclusion process.     

Synthesis of Calix[6]arene-Porphyrin Receptors and Study on their Catalytic Performance in Epoxidation of Styrene

The artificial receptors with multiple recognition site had been synthesized by linking two unsymmetrical monofunctionalized porphyrin to p-tert-butyl calix[6]-arene via two flexible chain, followed by inserting metal ion into the porphyrin species.The structures (see Fig 1) of these calix[6]arene-diporphyrins and their metal complexes were confirmed by UV-vis spectra, IR spectra, mass spectra, ¹NMR spectra(600 MHz) and/or ¹³C NMR. Their conformations were investigated preliminarily by UV-vis spectra and computer simulation. In constrast with the correspounding porphyrin monomer, the soret bond of calix[6]arene-diporphyrins in UV-vis spectra showed hypsochromic shift. This phenomenon suggested that two porphyrin rings maintain a face to face parallel conformation, as confirmed by computer simulation that showed the conformation energy is the lowest as two porphyrin rings hold such a conformation. Besides, simplicity of the ¹NMR spectra indicates that the conformation of calix[6]arene-diporphyrin possesses high symmetry. Therefore,the calix[6]arene must be cone conformation.     

Main-group-element calix[4]arenes: variable coordination and conformational isomerism at phosphorus and silicon

Treatment of calix[4]arene (1b) with trichloromethylsilane yields two conformers of calix[4]SiMe(OH), the cone 2b-C and the partial cone 2b-PC. These are isolated and structurally characterized, and their thermodynamic activation parameters are determined in solution [Ea = 117(3) kJ/mol, delta H = 5(4) kJ/mol]. Similar parameters are found for the p-tert-butylcalix[4]arene analogues 2a-C and 2a-PC. Deprotonation of 2b with butyllithium yields calix[4]SiMe(OLi) (8b). The structure of 8b is solvent dependent: 8b contains a five-coordinate silicon in THF and a four-coordinate silicon in benzene. Similar behavior is found for the p-tert-butylcalix[4]arene analogues. The five-coordinate phosphorus analogue of the anion in 8, p-tert-butylcalix[4]PMe (11a), is synthesized from the phosphonium triflate salt p-tert-butylcalix[4]PMe(OH)OTf (10a(OTf)) via treatment with butyllithium. The structure of 11a shows the geometry around phosphorus to be very close to a pure trigonal bipyramid. The X-ray structure of 10a(OTf) cannot be obtained, but its iodide analogue 10a(T) is synthesized and structurally characterized. The cation in 10a(I) adopts the partial cone conformation in the solid state, similar to 2b-PC. Treatment of 8b with methyl trifluoromethanesulfonate yields the methyl phenyl ether calix[4]SiMe(OMe) (3b). This species and its p-tert-butyl analogue 3a are structurally characterized. Both adopt the partial cone conformation. The SiMe group in 3b can be removed via treatment with fluoride to yield the monomethylated calix[4]arene 4b in 50-60% overall yield based on 1b.     

Phosphate Doubly Capped Tetrahomodioxacalix[6] arene

A bisphosphate-bridged tetrahomodioxacalix[6] arene with a C2v symmetry at the ambient temperature was obtained by the reaction of tetrahomodioxacalix[6] arene with POCl3。     

Aminolysis reaction of calix [ 4 ] arene esters and crystal structures and conformational behaviors of calix[4]arene amides

We first make use of aminolysis of calix[4]arene esters to synthesize calix[4]arene amides. When the two ethyl esters of the calix[4]arene esters are aminolysized, the 1, 3-amide derivative is formed selectively. The crystal structures of the calix-[4]arene with two butyl amide (3b) and four butyl amide moieties (4b) were determined. The intermolecular hydrogen bonds make 4b form two-dimensional net work insolid state. The 1H NMR spectra prove that 3b is of a pinched cone conformation, while 4b and tetraheptylamide-calix[4]arene (6b) take fast interconversion between two C2v isomers in solution and appear an apparent cone conformation at room temperature. As decreasing temperature, the interconversion rate decreases gradually and, finally, the interconversion process is frozen at Tc = -10℃, which makes both conformations of 4b and 6b the pinched cone structures. The hydrogen bond improves the interconversion barrier, and the large different values of the potential barrier between 6b and 4b (or 6b) may     

Origins of cooperative noncovalent host-guest chemistry in mixed valence complexes

The electronic effects resulting from noncovalent host-guest interactions between calix[6]arene and a ruthenium dimer, [Ru3O(OAc)6(CO)(ppy)]2-mu-pz (ppy=4-phenyl pyridine, pz=pyrazine), are presented. The noncovalent interaction is between the calix[6]arene and the ppy ligands of the dimer. The dimer can bind 2 equiv of calix[6]arene. The complex [Ru3O(OAc)6(CO)(ppy)]2-mu-pz forms a highly stable mixed valence ion with strong electronic coupling between the two Ru3 clusters. The strength of the electronic interaction is found to be moderated by calix[6]arene binding. Addition of calix[6]arene to the mixed valence ion causes the electronic coupling to decrease. The binding of calix[6]arene is found to be cooperative. The origins of cooperative binding are developed in terms of the potential energy surfaces associated with the symmetric and asymmetric mixed valence ion. In particular, it is found that symmetry breaking (through the binding of a single calix[6]arene) destabilizes the mixed valence state. Restoration of symmetry (through the binding of a second calix[6]arene) increases the stability of the mixed valence ion and provides an additional driving force for the binding of the second calix[6]arene.     

含酰胺和席夫碱单元的杯[4]芳烃衍生物的合成与配合性能

杯[4]-1,3-二乙酸乙酯衍生物1与水合肼反应生成杯[4]芳烃酰肼衍生物2, 然后进一步与相应的芳醛反应, 高产率地合成了三个新型的含酰胺和席夫碱单元的杯[4]芳烃衍生物3a～3c和一例新型杯[4]冠醚4. 阳离子萃取实验表明新型杯芳烃衍生物比只含有酰胺基或席夫碱基的杯芳烃衍生物有更强的软金属离子配合性能, 杯[4]冠醚4还对Ag^＋有较好的选择性萃取能力.