Improved partition efficiency with threaded cylindrical column in vortex counter-current chromatography

Type-I coil planet centrifuge produces a uniformly circulating centrifugal force field to produce vortex motion of two immiscible solvent phases in a cylindrical cavity of the separation column to perform efficient countercurrent chromatography. The partition efficiency obtained from the original vortex column was substantially improved by threading the cylindrical cavity to increase the area of mass transfer between the two phases. Partition efficiency of the threaded column was evaluated by three different two-phase solvent systems with a broad range of hydrophobicity each with a set of suitable test samples. Overall results of the present studies indicated that the threaded cylindrical column substantially improves the partition efficiency in terms of theoretical plate number, peak resolution, and height equivalent of one theoretical plate. The results also indicated that higher peak resolution is produced by eluting either the upper phase in the head to tail direction or the lower phase in the reversed direction. When there is a choice in the mobile phase, a better separation is achieved by using the less viscous phase as the mobile phase. Since the present system gives extremely low column pressure, it may be a potential alternative to the conventional type-J HSCCC system for a large-scale preparative separation.     

一种用于大容量逆流色谱制备的立式多层螺旋管行星式离心机

Owing to no complications caused by solid supports, such as adsorptive sample loss and deactivation, tailing of solute peaks, and contamination, countercurrent chromatography (CCC) has been an area of intense research since the first introduction of CCC in 1970,[1] and various apparatus and broad applications have been advanced[2,3]. For these developments, the type-J synchronous planet centrifuge has received considerable attention, which relies not only on its relatively simple mechanic design, but also on its high partition efficiency and short elution time caused by mixing and settling for the efficient chromatographic separations. In the past, however, almost all of type-J centrifuges rotated slowly were disposed horizontally due to the original design and some experiments that gravis plays an important role at a low rotary speed as similar to type-V rotating multilayer helical tube in unit gravity[4-9]. In fact,we discovered that the upright apparatus holds more retention of stationary phase than the horiziontal aparatus when large standard tubings were used as mutilayer coil column and the aparatus was operated under same contions. We report here a new coil planet centrifuge with four upright cylindrical columns for large scale countercurrent chromatographic preparation. The design principle and apparatus of UCCC is as samilar to type-J multilayer coil planet centrifuge. Four uptight cylindrical column holders are symmetrically arranged around the centrifuge axis as similar to the type-J HSCCC with three horizontal multilayer coils connected in series[8] . A series of experiments indicat that upright CCC has many advantages over the horizontal CCC when using a large-bore tube as multilayer coil column for large scale countercurrent chromatographic separation.Upright CCC provide a versatile countercurrent chromatographic method for large-scale preparation from very crude sample. It has good preparative capacity and flexible suitability to various sample and two-phase system.The present apparatus not only can be operated at a high speed as similar as commonly used HSCCC for the system having short settling time and but also can be run at a low speed for the system having relative long settling time. Because of automatical control and seal-free flow through device, the uptight CCC apparatus may be readily scaled up to industrial preparation.     

Integration of capillary isoelectric focusing with monolithic immobilized pH gradient,immobilized trypsin microreactor and capillary zone electrophoresis for on‐line protein analysis

An integrated platform consisting of protein separation by CIEF with monolithic immobilized pH gradient (M‐IPG), on‐line digestion by trypsin‐based immobilized enzyme microreactor (trypsin‐IMER), and peptide separation by CZE was established. In such a platform, a tee unit was used not only to connect M‐IPG CIEF column and trypsin‐IMER, but also to supply adjustment buffer to improve the compatibility of protein separation and digestion. Another interface was made by a Teflon tube with a nick to couple IMER and CZE via a short capillary, which was immerged in a centrifuge tube filled with 20 mmol/L glutamic acid, to exchange protein digests buffer and keep electric contact for peptide separation. By such a platform, under the optimal conditions, a mixture of ribonuclease A, myoglobin and BSA was separated into 12 fractions by M‐IPG CIEF, followed by on‐line digestion by trypsin‐IMER and peptide separation by CZE. Many peaks of tryptic peptides, corresponding to different proteins, were observed with high UV signals, indicating the excellent performance of such an integrated system. We hope that the CE‐based on‐line platform developed herein would provide another powerful alternative for an integrated analysis of proteins.     

Spiral counter-current chromatography of small molecules, peptides and proteins using the spiral tubing support rotor

An important advance in countercurrent chromatography (CCC) carried out in open flow-tubing coils, rotated in planetary centrifuges, is the new design to spread out the tubing in spirals. More spacing between the tubing was found to significantly increase the stationary phase retention, such that now all types of two-phase solvent systems can be used for liquid-liquid partition chromatography in the J-type planetary centrifuges. A spiral tubing support (STS) frame with circular channels was constructed by laser sintering technology into which FEP tubing was placed in 4 spiral loops per layer from the bottom to the top and a cover affixed allowing the tubing to connect to flow-tubing of the planetary centrifuge. The rotor was mounted and run in a P.C. Inc. type instrument. Examples of compounds of molecular weights ranging from <300 to approximately 15,000 were chromatographed in appropriate two-phase solvent systems to assess the capability for separation and purification. A mixture of small molecules including aspirin was completely separated in hexane-ethyl acetate-methanol-water. Synthetic peptides including a very hydrophobic peptide were each purified to a very high purity level in a sec-butanol solvent system. In the STS rotor high stationary phase retention was possible with the aqueous sec-butanol solvent system at a normal flow rate. Finally, the two-phase aqueous polyethylene glycol-potassium phosphate solvent system was applied to separate a protein from a lysate of an Escherichia coli expression system. These experiments demonstrate the versatility of spiral CCC using the STS rotor.     

Vortex counter-current chromatography

A novel counter-current chromatographic system is developed by mounting a vortex column on a type-I coil planet centrifuge. The column is fabricated from a high-density polyethylene disk (16 cm diameter and 5 cm thick) by making multiple holes of various diameters (3-12.5 mm) each arranged in a circle and connected with narrow transfer ducts. The performance of this vortex column is tested with three different two-phase solvent systems with a broad range in hydrophobicity. The results indicated that the smallest diameter column (3mm diameter, 120 units with 42.8 ml capacity) yielded the best separation with the height equivalent to a theoretical plate of 2 cm compared with 20 cm required by the conventional multilayer coil column of high-speed CCC. By avoiding the use of an Archimedean Screw Force, the system shows a low column pressure which would permit safe operation of a large preparative column without a risk of leakage of solvent and column damage.     

New small-scale cross-axis coil planet centrifuge. Partition efficiency and application to purification of bullfrog ribonuclease

The new small-scale cross-axis coil planet centrifuge (X-axis CPC) previously designed and fabricated in our laboratory has a distinctive feature such that four separation columns of similar weight are mounted symmetrically around the rotary frame to achieve stable balancing of the centrifuge under a high revolution speed. In this column layout, neighboring columns must be rotated in the opposite direction if viewed from the center of the centrifuge to avoid twisting the interconnecting flow tubes. The effect of rotational direction of the columns on the partition efficiency was evaluated with separation of a set of test samples such as cytochrome c, myoglobin, and lysozyme using an aqueous-aqueous polymer phase system composed of 12.5% (w/w) polyethylene glycol (PEG) 1000 and 12.5% (w/w) dibasic potassium phosphate under 1000 rpm of column revolution. A series of experiments was performed using a set of two diagonally located columns (connected in series) each consisting of five coiled layers of 1 mm I.D. with a total capacity of 27.0 mL. Both right- and left-handed coils were tested each under the optimized conditions for choice of mobile phase and direction of the column rotation so that the satisfactory volume of the mobile phase was retained in the column by the aid of Archimedean screw effect. The results of these studies showed that one particular combination of handedness of the coil and direction of the rotation yielded the best peak resolution for each mobile phase. In order to demonstrate the capability of the apparatus, the purification of ribonuclease (RNase) from the extract of bullfrog egg, sialic acid binding lectin (cSBL), was carried out using both organic-aqueous and aqueous-aqueous polymer phase systems. When using the 16.0% (w/w) PEG 1000-6.3% (w/w) dibasic potassium phosphate-6.3% (w/w) monobasic potassium phosphate system, cSBL was successfully separated from other proteins present in the extract while commercial RNase A was eluted at near the solvent front by the lower phase mobile. The cSBL retained its native RNase activity. The overall results demonstrated that the present new small-scale X-axis CPC is useful for the purification of bioactive compounds without loss of their native activities.     

Support-free pulsed liquid–liquid chromatography

A simple technique of support-free liquid–liquid chromatography is suggested that operates without incorporation of a centrifuge. The pulsed chromatography apparatus consists of a stationary coiled tube and a pulsation device to produce reciprocating motion of liquid phases within each individual coil segment. This reciprocating motion generates a centrifugal force field varying in intensity and direction that leads to an improved mixing of the two liquid phases and retains the stationary phase in the coiled tubing. The intensity of the back and forth motion of liquid phases within each coil unit can be varied by varying the frequency and/or the amplitude of the pulsations generated by the pulsation device. As the magnitude of the stationary phase retention is of paramount importance for success of the technique, the retention of the stationary phase in the pulsed coil column was experimentally studied. A few experiments were conducted to test the chromatographic behavior of valeric (n-pentanoic) and caproic (n-hexanoic) acids. The results obtained demonstrate the potential of the new separation method for preparative purposes.     

Rapid linear scale-up of a protein separation by centrifugal partition chromatography

The scaling up of the separation of two proteins with an aqueous two-phase system (ATPS) from 176 mg with a 500 ml laboratory scale centrifugal partition chromatography (CPC) column to 2.2g with a 6.25 litre pilot-scale column is presented. A model sample system of a mixture of lysozyme and myoglobin was chosen for this study using an ATPS system comprising 12.5% (w/w) PEG-1000:12.5% (w/w) K2HPO4. It was found that the maximum sample concentration possible without precipitation was 2.2mg/ml for each constituent. The optimisation of rotor speed, mobile phase flow rate and sample loading was performed on a laboratory-scale device. It was found that a centrifuge speed of 2000 rpm (224 'g'), 10 ml/min mobile phase flow rate with a 43 ml (10% of active column volume) sample volume gave optimum operating conditions. This was linearly scaled up to pilot scale by increasing mobile phase flow rate, fraction size and sample loading in the ratio of the system capacities (i.e. 12.5:1). Flow rate was therefore increased from 10 ml/min to 125 ml/min, fraction size from 10 ml to 125 ml and sample loading from 43 ml to 500 ml. Rotor speed however was reduced from 2000 rpm on the laboratory device to 1293 rpm on the pilot-scale device to maintain the same 224 'g' field in each chamber, as the pilot-scale CPC unit has a larger rotor radius than the laboratory one. Resolution increased from Rs=1.28 on the 500 ml rotor to Rs=1.88 on the 6.25 litre rotor, giving potential throughputs in batch mode of over 40 g/day.     

中空纤维分离-高效液相色谱法测定静脉注射用人免疫球蛋白中的麦芽糖

建立了中空纤维分离-HPLC测定静脉注射用人免疫球蛋白中的麦芽糖含量的方法.在离心力的作用下,样品溶液中的小分子物质能透过垂直放置在离心管中的中空纤维,同时离心力也减小了膜外大分子形成的浓差极化.采用Inertsil NH2色谱柱(250 mm×4.6 mm,5 μm)及示差折光检测器,流动相为V(乙腈)∶V(水)=70∶ 30,柱温40 ℃,流速为1.0 mL/min.麦芽糖浓度在1.00～5.00 g/L范围内线性关系良好(r=0.9999),平均加标回收率为100.6%,RSD为1.4%.本方法简便快速、结果准确,克服了蛋白沉淀不完全,吸附严重等现象,为微量样品的分析提供了简单廉价超滤手段,适用于蛋白类制品小分子样品的前处理.     

Countercurrent Chromatography Using a Toroidal Coil Planet-Centrifuge: A Comparative Study of the Separation of Organelles Using Aqueous Two-Phase Partition

Abstract

A toroidal coil planet centrifuge is described and compared with other countercurrent chromatography (CCC) and countercurrent distribution (CCD) techniques. The basis of separation is partition in aqueous two-phase polymer systems, with each method assessed by fractionating rat liver organelles. The size and ease of operation of the toroidal coil planet centrifuge gave significant advantages over conventional CCD systems achieving equivalent resolution in a fraction of the time.     

Gram Quantity Separation of DNP (Dinitrophenyl) Amino Acids with Multi-Layer Coil Countercurrent Chromatography (CCC)

Abstract

The efforts have been successfully made to extend the preparative capability of the high-speed CCC scheme with a multi-layer large capacity coiled column. The apparatus is a table top model of a horizontal flow-through coil planet centrifuge which produces a synchronous planetary motion of the column holder. The separation column was prepared from a single piece of 70 m long, 2.6 mm i.d., PTFE tubing coiled around the spool-shaped holder to form multiple layers of the coil with a total capacity of about 400 ml. The performance of the apparatus was assessed with a standard set of DNP amino acid samples and a two-phase solvent system composed of chloroform, acetic acid and 0.1N HCl (2:2:1). Preparative capability of the method was evaluated in terms of the retention level of the stationary phase and peak resolution for various sample size ranging from 0.05g to 2g. The effects of sample volume, sample concentration and the choice of the sample diluent on the separation were studied. The results indicated that both the retention level and the peak resolution tend to decrease with the increase of the sample volume applied at a given concentration. For separation of 1 gram quantity, best results were obtained by applying the sample dissolved in a small volume (10 ml) consisting of equal amounts of the two phases. Overall results indicate that the present scheme is capable of efficient separation for gram quantity of samples in a short period of time. The preparative capability may be further increased by the use of a larger-diameter and/or longer coil.     

New angle rotor coil planet centrifuge for counter-current chromatography. II. Design of the apparatus and studies on phase retention and partition capability

A new angle rotor coil planet centrifuge (psi = 25 degrees), which produces a Type J-L synchronous planetary motion, has been constructed to examine its capability in terms of stationary phase retention and solute partitioning. Studies on phase distribution diagrams obtained from various two-phase solvent systems indicated that the present system can be adapted to a wide variety of solvent systems by adjusting the centrifugal conditions. Excellent partition capability of the apparatus was successfully demonstrated in separations of dinitrophenyl amino acid samples with chloroform-acetic acid-0.1 N hydrochloric acid (2:2:1).     

Controllable Assembly and Separation of Colloidal Nanoparticles through a One‐Tube Synthesis Based on Density Gradient Centrifugation

Self‐assembly of gold nanoparticles into one‐dimensional (1D) nanostructures with finite primary units was achieved by introducing a thin salt (NaCl) solution layer into density gradient before centrifugation. The electrostatic interactions between Au nanoparticles would be affected and cause 1D assembly upon passing through the salt layer. A negatively charged polymer such as poly(acrylic acid) was used as an encapsulation/stabilization layer to help the formation of 1D Au assemblies, which were subsequently sorted according to unit numbers at succeeding separation zones. A centrifugal field was introduced as the external field to overcome the random Brownian motion of NPs and benefit the assembly effect. Such a facile “one‐tube synthesis” approach couples assembly and separation in one centrifuge tube by centrifuging once. The method can be tuned by changing the concentration of interference salt layer, encapsulation layer, and centrifugation rate. Furthermore, positively charged fluorescent polymers such as perylenediimide‐poly(N,N‐diethylaminoethyl methacrylate) could encapsulate the assemblies to give tunable fluorescence properties.     

Evaluation of Analytical Countercurrent Chromatographs: High-Speed Countercurrent Chromatograph-4000 Vs. Analytical Toroidal Coil Centrifuge

Abstract

Performance of two countercurrent chromatographic models, high speed countercurrent chromatograph (HSCCC-4000) and analytical toroidal coil centrifuge (TCC), is evaluated in terms of theoretical plate number, resolution factor and separation time to assess their analytical capability. A series of experiments was conducted to investigate the effects of internal diameter and length of the coiled column, and flow rate of the mobile phase on the separation of indole auxins in two-phase solvent systems composed of n-hexane-ethyl acetate-methanol-water at different volume ratios. The three components of indole auxins were completely resolved in 16 min with a HSCCC system equipped with a multilayer coil of a 0.55 mm I.D. PTFE tube with theoretical plates ranging from 1290 to 829. Similar separation was achieved in 24 min with a TCC systems equipped with a 0.3 mm I.D. PTFE tube with theoretical plates ranging from 1811 to 969. It is concluded that both systems have comparable analytical capability at the present stage of development.     

Simultaneous separation of hydrophilic and hydrophobic compounds by using an online HILIC-RPLC system with two detectors

In the present study, we developed a novel online hydrophilic interaction chromatography (HILIC)-RPLC separation system for simultaneous separation of both hydrophilic and hydrophobic solutes in a complex sample with one injection. A HILIC Si column and a C18 column were hyphenated with an interface including two electronic 2-position valves, a solvent pump, and a solute transfer column. By using column-switching technique, the nonretained hydrophobic solutes were eluted out of the HILIC column and transferred into the C18 column to perform further separation. The hydrophilic solutes were separated on the HILIC column at the same time. One detector was equipped for each column to record the individual chromatograms. By separating a standard mixture and a traditional Chinese medicine (TCM) extract, the developed HILIC-RPLC system demonstrates its potential for "entire-components" separation of complex samples with improved peak capacity and throughput compared with the common single-column LC.     

Improved spiral tube assembly for high-speed counter-current chromatography

The original spiral tube support (STS) assembly is improved by changing the shape of the tubing, with 1-cm presses perpendicularly along the length. This modification interrupts the laminar flow of the mobile phase. The tubing in the four return grooves to the center of the rotor is flattened by a specially made pressing tool to increase the number of spiral layers and decrease the dead space volume, thus increasing the column efficiency. The performance of this spiral tube assembly was tested in separations of dipeptides and proteins with suitable polar two-phase solvent systems. The results revealed that the present system yields high partition efficiency with a satisfactory level of stationary phase retention in a short elution time. The present high-speed counter-current chromatographic (HSCCC) system will be efficiently applied to a broad spectrum of two-phase solvent systems including aqueous–aqueous polymer phase systems (TPAS) which are used for separation of biopolymers such as proteins and nucleic acids.     

Mathematical model of computer-programmed intermittent dual countercurrent chromatography applied to hydrostatic and hydrodynamic equilibrium systems

Dual high-speed countercurrent chromatography (dual CCC) literally permits countercurrent flow of two immiscible solvent phases continuously through the coiled column for separation of solutes according to their partition coefficients. Application of this technique has been successfully demonstrated by separation of analytes by gas–liquid and liquid–liquid two-phase systems. However, the method cannot be directly applied to the system with a set of coiled columns connected in series, since the countercurrent process is interrupted at the junction between the columns. However, this problem can be solved by intermittent dual CCC by eluting each phase alternately through the opposite ends of the separation column. This mode of application has an advantage over the conventional dual CCC in that the method can be applied to all types of CCC systems including hydrostatic equilibrium systems such as toroidal coil CCC and centrifugal partition chromatography. Recently, the application of this method to high-speed CCC (hydrodynamic system) has been demonstrated for separation of natural products by Hewitson et al. using a set of conventional multilayer coil separation columns connected in series. Here, we have developed a mathematical model for this intermittent dual CCC system to predict retention time of the analytes, and using a simplified model system the validity of the model is justified by a series of basic studies on both hydrodynamic and hydrostatic CCC systems with a computer-programmed single sliding valve. The present method has been successfully applied to spiral tube assembly high-speed CCC (hydrodynamic system) and toroidal coil CCC (hydrostatic system) for separation of DNP-amino acid samples with two biphasic solvent systems composed of hexane–ethyl acetate–methanol–0.1 M hydrochloric acid (1:1:1:1 and 4:5:4:5, v/v).     

Large-Scale Preparative Counter-Current Chromatography with a Coil Planet Centrifuge

Abstract

Development of the large-scale preparative countercurrent chromatographic schemes has been continued by increasing the diameter of the separation column. A 0.55 cm i.d. FEP tube was coaxially coiled around the holder (7.5 cm, 10 cm or 15 cm in diameter) of a horizontal flow-through coil planet centrifuge (15 cm revolutional radius). Performance of each column was evaluated on the separation of dinitrophenyl amino acid samples with a two-phase solvent system composed of chloroform, acetic acid, and 0.1N hydrochloric acid (2:2:1) by using both aqueous and nonaqueous phases as the mobile phase. Experiments with the short preliminary columns (114 ml capacity) revealed that the hydrodynamic distribution of the two solvent phases was sensitively affected by the helical diameter of the column. However, by choosing the proper elution mode of the mobile phase, satisfactory results were obtained with the helical diameters of 7.5 cm and 15 cm at a high flow rate of 500 ml/h under a moderate revolutional speed of 300 rpm. With the long coiled columns (750 ml capacity), the preparative capability of the present scheme was successfully demonstrated on separations of the 1g-quantity sample mixture under optimized operational conditions. Overall results indicated that the sample-loading capacity of the present scheme can be further increased by the use of longer and/or larger-diameter columns.     

Vortex Counter-Current Chromatography: Performance of a New Preparative Column

A new preparative column for the vortex counter-current chromatograph was fabricated by making many (966) cylindrical separation units to a high-density polyethylene disk and then threading them with 6–40 taps. The resulting column had a total capacity of 364 mL. The performance of this vortex column was examined with three different two-phase solvent systems each using a set of suitable test samples: hexane–ethyl acetate–methanol–0.1 M hydrochloric acid (1:1:1:1, v/v) for the separation of DNP-amino acids; 1-butanol–acetic acid–water (4:1:5, v/v) for the separation of dipeptides; and hexane–acetonitrile–water (20:15:2, v/v) for the separation of Sudan dyes. Most of the separations show high partition efficiency of over a thousand theoretical plates, as expected based on the results previously obtained in preliminary separations with a small column. Overall, the results of the present study suggest that further improvement of the partition efficiency can be obtained by the modifying column configuration.

     

Recent advances in counter-current chromatography

During the past several years, counter-current chromatography (CCC) technology has been advanced to cover a broad spectrum of applications, from large-scale preparative to analytical-scale separations. These advances include liquid-liquid dual CCC, foam CCC and partition of macromolecules with aqueous-aqueous polymer phase systems. For these developments the synchronous coil planet centrifuge scheme has been used, which relies on a relatively simple mechanical design. Future developments in CCC may be focused on the improvement of the more intricate non-synchronous coil planet centrifuge scheme which has a greater potential for the separation of biopolymers and cell particles.