ABC三嵌段共聚物胶束从多间隔结构到多核结构转变的Monte Carlo模拟

采用Monte Carlo模拟方法研究了疏水-亲水-疏水(H-P-H)型ABC三嵌段共聚物在B嵌段的选择性溶剂中的自组装行为. 模拟结果表明, 通过调节A嵌段和C嵌段的疏水性和二者之间的不相容性, 体系中可以形成多种形貌各异的胶束. 根据胶束中疏水核结构的特点, 这些胶束大体上可以被分为多核型胶束和多间隔型胶束两种类型. 通过增强疏水嵌段的疏水性或降低A嵌段和C嵌段间的不相容性, H-P-H型ABC三嵌段共聚物胶束能够发生从多核型胶束向多间隔型胶束的转变. 进一步分析胶束中聚合物的链构象等微观结构信息发现, A嵌段和C嵌段间的排斥作用和疏水作用之间存在竞争关系, 而这种竞争关系是影响体系中形成多核型胶束还是多间隔型胶束的决定性因素.     

Highly Symmetric Patchy Multicompartment Nanoparticles from the Self-Assembly of ABC Linear Terpolymers in C-Selective Solvents

Multicompartment micelles, especially those with highly symmetric surfaces such as patchy-like, patchy, and Janus micelles, have tremendous potential as building blocks of hierarchical multifunctional nanomaterials. One of the most versatile and powerful methods to obtain patchy multicompartment micelles is by the solution-state self-assembly of linear triblock copolymers. In this article, we applied the simulated annealing method to study the self-assembly of ABC linear terpolymers in C-selective solvents. Simulations predict a variety of patchy and patchy-like multicompartment micelles with high symmetry and also yield a detailed phase diagram to reveal how to control the patchy multicompartment micelle morphologies precisely. The phase diagram demonstrates that the internal segregated micellar structure depends on the ratio between the volume fractions of the two solvophobic blocks and their incompatibility, whereas the overall micellar shape depends on the copolymer concentration. The relationship between the interfacial energy, stretching energy of chains and the micellar morphology, micellar morphological transition are elucidated by computing the average contact number among the species, the mean square end-to-end distances of the whole terpolymers, the AB blocks in the terpolymers, the AB diblock copolymers, and angle distribution of terpolymers. The anchoring effect of the solvophilic C block on micellar structures is also examined by comparing the morphologies formed from ABC terpolymers and AB diblock copolymers.     

Fabrication of a composite colloidal particle with unusual janus structure as a high-performance solid emulsifier

Core-shell particles with cross-linked core and shell were used as seed particles to produce composite Janus particles. It was found that when the shell has distinctly higher cross-linking degree than the core, Janus particles with very unusual structures can be obtained. These particles have two parts, with one part embraced partially or entirely by the other part, adjustable by parameters such as phase ratio or cross-linking degree. On the basis of experimental observations, a possible mechanism for the formation of such unusual Janus particles has been proposed. Janus particles with arms are used to emulsify water-toluene mixtures, forming oil-in-water (O/W) emulsions at very high internal phase content with rather low concentration of particles. Nonspherical emulsion droplets were observed, indicating that these Janus particles are likely to jam at the interface, forming a strong protecting layer to stabilize emulsions.     

Both core- and shell-cross-linked nanogels: photoinduced size change, intraparticle LCST, and interparticle UCST thermal behaviors

New thermal- and photoresponsive core-shell nanogel particles were obtained from self-assembly in aqueous solution of a double-hydrophilic block copolymer (DHBCP) of which the two blocks could be photo-cross-linked via the reversible photodimerization and photocleavage of coumarin moieties. The diblock copolymer, consisting of poly[N,N-dimethylacrylamide-co-4-methyl-[7-(methacryloyl)oxyethyloxy]coumarin] and poly[N-isopropylacrylamide-co-4-methyl-[7-(methacryloyl)oxyethyloxy]coumarin] (P(DMA-co-CMA)-b-P(NIPAM-co-CMA)), was synthesized by using reversible addition-fragmentation chain transfer (RAFT) polymerization. At T > LCST of the P(NIPAM-co-CMA) block, core-shell micelles were formed and UV light irradiation at λ > 310 nm resulted in cross-linking of both the micelle core of P(NIPAM-co-CMA) and the micelle shell of P(DMA-co-CMA); subsequent cooling of the solution to T < LCST gave rise to water-soluble, swollen nanogel particles. Upon UV light irradiation at λ < 260 nm, the decrease of cross-linking density could increase the swelling of nanogel particles by ～23% in diameter. By alternating irradiation with the different wavelengths, the average hydrodynamic diameter of nanogel particles was tunable between ～58 and ～47 nm. Interestingly, upon further cooling of the solution, aggregation occurred for nanogel particles with a moderate cross-linking density (10%-40% dimerization of coumarin moieties). Therefore, such core- and shell-cross-linked nanogel could display both "intraparticle" LCST (solubility of polymer chains forming the core) and "interparticle" UCST (solubility of particles). The possible mechanism and the effect of dimerization degree on the UCST behavior were discussed.     

非对称性Janus粒子的制备与可控组装

古罗马的双面神(Janus)常被用来描述具有两种不同化学结构或性质的不对称粒子, Janus粒子由于自身的特殊性能在药物载体、电子器件和乳液稳定等方面表现出良好的发展势头, 其应用前景日益受到人们的重视. 目前, Janus 粒子作为基本的组装基元受到越来越多的关注, 相关组装方法也被广泛地研究, 包括本体组装、界面组装和外界驱动力调控等, 特别是Janus 粒子的双亲修饰与功能化. 本文综述了现今Janus 粒子制备方法及对其进行修饰组装的最新研究进展, 详细讨论比较了一步合成法、聚合物自组装法和晶种直接生长等方法的特点及差异, 并对一些新型功能Janus粒子的设计及潜在的应用前景进行了展望.     

Morphologies of multicompartment micelles formed by triblock copolymers

Multicompartment micelles are desirable for advanced applications such as drug delivery. Recently, core-shell-corona (CSC) and segmented-worm (SW) micelles formed by ABC triblock terpolymers with three mutually immiscible blocks are observed in experiments. We have performed dissipative particle dynamics simulations to study the effects of molecular architecture, block length, and solution concentration on the morphologies of ABC triblock terpolymers. The formation of CSC and SW micelles for linear and miktoarm star ABC terpolymers is confirmed in this work. In addition, we predict that different multicompartment micellar morphologies (e.g., incomplete skin-layered micelles and segmented worms) can be formed by linear copolymer with different arrangements of the three blocks.     

Self-assembly and responsiveness of polypeptide-based block copolymers: How “Smart” behavior and topological complexity yield unique assembly in aqueous media

Polypeptide-based amphiphilic block copolymers are an attractive class of materials given their ability to form well-defined aqueous nanoassemblies that respond to external stimulus through secondary structure transitions. This report will highlight recent literature in the area of polypeptide-based block copolymer self-assembly, with the major focus being on how the responsive nature and structural complexity of the polypeptide blocks can be incorporated into systems with complex topologies such as ABA/BAB/ABC triblock copolymers, AB₂ and A₂B star copolymers, and miktoarm μ-ABC star terpolymers. In particular, the role of interfacial curvature changes and how they result in morphology transitions will be discussed. The ‘smart’ assembly properties of peptides in complex block copolymer topologies can lead to enhanced responsiveness, morphological complexity, and unique morphological transitions with varying solution conditions. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Unexpected consequences of block polydispersity on the self-assembly of ABA triblock copolymers

Controlled/"living" polymerizations and tandem polymerization methodologies offer enticing opportunities to enchain a wide variety of monomers into new, functional block copolymer materials with unusual physical properties. However, the use of these synthetic methods often introduces nontrivial molecular weight polydispersities, a type of chain length heterogeneity, into one or more of the copolymer blocks. While the self-assembly behavior of monodisperse AB diblock and ABA triblock copolymers is both experimentally and theoretically well understood, the effects of broadening the copolymer molecular weight distribution on block copolymer phase behavior are less well-explored. We report the melt-phase self-assembly behavior of SBS triblock copolymers (S = poly(styrene) and B = poly(1,4-butadiene)) comprised of a broad polydispersity B block (M(w)/M(n) = 1.73-2.00) flanked by relatively narrow dispersity S blocks (M(w)/M(n) = 1.09-1.36), in order to identify the effects of chain length heterogeneity on block copolymer self-assembly. Based on synchrotron small-angle X-ray scattering and transmission electron microscopy analyses of seventeen SBS triblock copolymers with poly(1,4-butadiene) volume fractions 0.27 ≤ f(B) ≤ 0.82, we demonstrate that polydisperse SBS triblock copolymers self-assemble into periodic structures with unexpectedly enhanced stabilities that greatly exceed those of equivalent monodisperse copolymers. The unprecedented stabilities of these polydisperse microphase separated melts are discussed in the context of a complete morphology diagram for this system, which demonstrates that narrow dispersity copolymers are not required for periodic nanoscale assembly.     

Janus discs

We describe the synthesis and the solution properties of sheet- and disclike Janus particles, containing an inner crosslinked polybutadiene (PB) layer and two different outer sides of polystyrene (PS) and poly(tert-butyl methacrylate) (PtBMA). The structures formed upon adsorption of the flat Janus particles onto solid substrates as well as in THF solution are investigated. The Janus discs are obtained in a template-assisted synthetic pathway followed by sonication. Selectively crosslinking the lamellar PB domains in a well-ordered lamellar microphase-separated bulk morphology of PS-block-PB-block-PtBMA (SBT) block terpolymers leads to the conservation of the compartmentalization of the two outer blocks. Sonication of the crosslinked block terpolymer templates renders soluble sheet- and disclike Janus particles, the size of which can be tuned from the micrometer range down to the nanometer scale. Small-angle X-ray scattering, transmission electron microscopy, dynamic light scattering, scanning force microscopy, and scanning electron microscopy are used to characterize the template-assisted synthetic process and the solution properties. Cryogenic transmission electron microscopy in THF and TEM of particles, embedded into a photo-crosslinkable silicon oil, indicate a supramolecular aggregation behavior of the Janus discs in concentrated solutions. Pendant drop tensiometry demonstrates that Janus sheets and discs can be used to stabilize liquid-liquid interfaces, rendering these materials interesting for future applications.     

两亲性Janus粒子在蜂窝状多孔聚合物膜上的自组装性能

采用具有两亲性的两面体(Janus)粒子实现稳定的粒子界面组装与水滴模板法自组装过程相结合的方法获得了粒子在蜂窝状多孔聚合物薄膜内壁的高效定向修饰.通过与均质粒子组装形貌的对比,证明了Janus粒子因其特殊的界面自组装活性,可以获得高粒子加量条件下的规则多孔结构,解决了使用均质粒子时存在的结构有序性和粒子修饰密度之间的矛盾.而在较低粒子加量的条件下,Janus粒子也展示出与均质粒子极为不同的组装形貌.这一方法的建立,为新型表面功能化材料的制备提供了一个新的思路.     

Precise Synthesis of New Triblock Co- and Terpolymers by a Methodology Combining Living Anionic Polymers with a Specially Designed Linking Reaction

Five A-B-A′, A-C-A′, B-A-B′, C-A-C′, and C-B-C′ triblock terpolymers with block orders difficult to synthesize by sequential polymerization have been successfully synthesized by a new methodology combining living anionic polymers with a specially designed linking reaction using α-phenylacrylate as the reaction site. Here, A(A′), B(B′), and C(C′) represent groups of polymers (having chain-end anions with different nucleophilicities), which are only polymerizable from A(A′) to B(B′) to C(C′) via sequential polymerization. The corresponding polymers are polystyrene (A) and poly(α-methylstyrene) (A′), poly(2-vinylpyridine) (B) and poly(4-vinylpyridine) (B′) and polymers from methacrylate type monomers like poly(methyl methacrylate) (C), poly(tert-butyl methacrylate) (C′), poly(2-hydroxyethyl methacrylate) (C′), poly(2,3-dihydroxypropyl methacrylate) (C′), and poly(ferrocenylmethyl methacrylate) (C′). Furthermore, three synthetically difficult B-A-B, C-A-C, and C-B-C triblock copolymers with molecular asymmetry in both side blocks have also been synthesized by the developed methodology. All of the polymers thus synthesized are quite new triblock terpolymers and copolymers with well-defined structures, i.e., precisely controlled molecular weights, compositions and narrow molecular weight distributions (M_w/M_n ≤ 1.05).     

软三嵌段两面神胶体粒子自组装行为的模拟研究

采用软补丁粒子模型及相应的介观动力学模拟方法, 研究了软三嵌段两面神胶体粒子在稀溶液条件下的自组装行为. 通过合理调节补丁大小和补丁之间的吸引强度, 软三嵌段两面神胶体粒子能够自组装形成非常丰富的聚集结构, 包括线状结构、 六方柱状结构、 体心四方束状结构以及三维网络状结构. 此外, 分析了与纤维结构类似的体心四方束状结构形成的动力学机理. 模拟结果为实验上设计并制备新颖的超胶体纳米结构提供一定的理论支持.     

Synthesis and Characterization of Triblock Terpolymers with three Potentially Crystallisable Blocks: Polyethylene-b-poly(ethylene oxide)-b-poly(ε-caprolactone)

A first attempt was made to produce novel ABC triblock terpolymers with three potentially crystallisable blocks: polyethylene (PE), poly(ethylene oxide) (PEO), and poly(ε-caprolactone) (PCL). Polybutadiene-b-poly(ethylene oxide) diblock copolymers were synthesized by living anionic polymerization. Then, a non-catalyzed thermal polymerization of ε-caprolactone from the hydroxyl end group of the PB-b-PEO diblock precursors was performed. Finally, hydrogenation by Wilkinson catalyst produced PE-b-PEO-b-PCL triblock terpolymers. Side reactions were detected that lead to the formation of undesired PCL-b-PEO diblock copolymers, however, these impurities were successfully removed by purification. A range of triblock terpolymers with PCL and PEO minor components were prepared. Topological restrictions on the PEO middle block prevented this block from crystallizing while the complex crystallization behavior of the PE and PCL blocks was documented by DSC and WAXS measurements.     

Micellar shape change and internal segregation induced by chemical modification of a tryptych block copolymer surfactant

We report the detailed characterization of micelles formed by two nonionic, amphiphilic ABC triblock copolymers. Poly(ethylene oxide)-b-poly(styrene)-b-1,2-poly(butadiene) (PEO-b-PS-b-PB) triblock copolymer "OSB" forms core-corona spherical micelles in aqueous solution, and the two hydrophobic blocks S and B are mixed homogeneously within the micelle core. PEO-b-PS-b-PB:C6F13I triblock copolymer "OSF" was prepared by selective fluorination of the B block in OSB with n-perfluorohexyl iodide. Fluorination of the B block induces internal segregation into an inner F core and an intermediate S shell. Furthermore, the strong incompatibility that results from fluorination drives a shape change into an oblate ellipsoid. These micellar morphologies are confirmed by combined light, neutron, and X-ray scattering measurements, as well as TEM imaging.     

配体链包覆纳米粒子的表面相分离及自组装的模拟研究

通过耗散粒子动力学方法,模拟了二元配体链包覆的纳米粒子表面的相分离行为,并与现有的模拟和实验体系进行对比.研究结果印证了相分离驱动力是配体链错位所导致的构象熵的结论.进一步以相分离得到的Janus和三嵌段Janus结构纳米粒子作为构筑单元,研究了其在选择性溶剂中的自组装行为.结果表明,Janus粒子易自组装成为双层囊泡结构,而三嵌段Janus粒子则更易形成单层囊泡结构.对于从配体链包覆的纳米粒子出发,设计具有特殊功能的囊泡提供了理论支持.     

Self-assembly Behavior of Symmetrical Linear ABCA Tetrablock Copolymer: A Self-consistent Field Theory Study

ABCA tetrablock copolymers offer new opportunities for design of materials with novel structures. Using real-space self-consistent field theory and simulation, we systematically examined the self-assembly behavior of linear ABCA tetrablock copolymers in a 2D space. The simulation was carried out under conditions of symmetrical compositions and interactions. We focus on the influence of chain length ratio of block A and interactions between block A and other blocks B and C on the self-assembly behavior of the copolymer system. The simulation results show that most of the structures self-assembled by the ABCA tetrablock copolymers are centrosymmetric, such as diblock-like lamella phase, two kinds of lamellae with beads at interface, two kinds of hierarchical lamella phase, hexagonal honeycomb-like phase, lamella phase with mixed BC and hexagonal spheres with mixed BC. Furthermore, we find that a novel noncentrosymmetric Janus spheres can be obtained when the interaction between blocks B and C is strong, whereas a noncentrosymmetric lamella phase was obtained at weak interaction between blocks B and C. Phase diagrams for the ABCA tetrablock copolymers with different interaction strength between blocks B and C are constructed by comparing free energies of candidate ordered structures. In addition, studies on the metastable behavior of the system reveal that enthalpy plays an important role in the metastable behavior of the ABCA tetrablock copolymer system. Our work can provide useful guide for structure control of such kind of tetrablock copolymers in experiments.     

Template‐Free Synthesis and Selective Filling of Janus Nanocups

We report on the formation of shape‐ and surface‐anisotropic Janus nanocups (JNCs) by evaporation‐induced confinement assembly (EICA) of ABC triblock terpolymers. During microphase separation in spherical confinement, the triblock terpolymer spontaneously adopted a hemispherical shape with an inner concentric lamella–lamella (ll) morphology. Cross‐linking and disassembly of the microparticles resulted in well‐defined JNCs with different chemistry on the inside and outside. By synthesizing polymers with increasing length of the cross‐linkable block, we tuned the mechanical stability of the nanocups, which is relevant to control opening and closing of the cup cavity. We utilize the Janus properties for selective uptake of cargo exemplified by the filling of JNCs with polymer or gold nanoparticles. The directional properties of JNCs suggest applications in locomotion, oil‐spill recovery, storage and release, templating, and as nanoreactors with attoliter volume.     

Brownian dynamics simulation study on the self-assembly of incompatible star-like block copolymers in dilute solution

We study the self-assembly of symmetric star-like block copolymers (A(x))(y)(B(x))(y)C in dilute solution by using Brownian dynamics simulations. In the star-like block copolymer, incompatible A and B components are both solvophobic, and connected to the center bead C of the polymer. Therefore, this star-like block copolymer can be taken as a representative of soft and deformable Janus particles. In our Brownian dynamics simulations, these "soft Janus particles" are found to self-assemble into worm-like lamellar structures, loose aggregates and so on. By systematically varying solvent conditions and temperature, we build up the phase diagram to illustrate the effects of polymer structure and temperature on the aggregate structures. At lower temperatures, we can observe large worm-like lamellar aggregates. Upon increasing the temperature, some block copolymers detach from the aggregate; this phenomenon is especially sensitive for the polymers with less arms. The aggregate structure will be quite disordered when the temperature is high. The incompatibility between the two parts in the star-like block copolymer also affects the self-assembled structures. We find that the worm-like structure is longer and narrower as the incompatibility between the two parts is stronger.     

Length Control and Block-Type Architectures in Worm-like Micelles with Polyethylene Cores

We present evidence for "living"-like behavior in the crystallization-driven self-assembly of triblock copolymers with crystallizable polyethylene middle blocks into worm-like crystalline-core micelles (CCMs). A new method of seed production is introduced utilizing the selective self-assembly of the triblock copolymers into spherical CCMs in appropriate solvents. Seeded growth of triblock copolymer unimers from these spherical CCMs results in worm-like CCMs with narrow length distributions and mean lengths that depend linearly on the applied unimer-to-seed ratio. Depending on the applied triblock copolymer, polystyrene-block-polyethylene-block-polystyrene (SES) or polystyrene-block-polyethylene-block-poly(methyl methacrylate) (SEM), well-defined worm-like CCMs with a homogeneous or patch-like corona, respectively, can be produced. In a subsequent step, these worm-like CCMs can be used as seeds for the epitaxial growth of a different polyethylene containing triblock copolymer. In this manner, ABA-type triblock co-micelles containing blocks with a homogeneous polystyrene corona and those with a patch-like polystyrene/poly(methyl methacrylate) corona were prepared. While the epitaxial growth of SEM unimers from worm-like SES CCMs with a homogeneous corona yields triblock co-micelles almost quantitatively, the addition of SES unimers to patchy SEM wCCMs results in a mixture of ABA- and AB-type block co-micelles together with residual patchy wCCMs. Following reports on self-assembled block-type architectures from polymers containing core-forming polyferrocenylsilane blocks, these structures represent the first extension of the concept to block co-micelles from purely organic block copolymers.     

Macroscopic, free-standing ag-reduced, graphene oxide janus films prepared by evaporation-induced self-assembly

A facile, efficient, and unique self-assembly process for the preparation of the macroscopic, free-standing, Ag-reduced, graphene oxide (Ag-RGO) Janus films, which exhibit a unique asymmetry of their two surfaces with macroscopic dimensions, is presented. A novel strategy using an evaporation-induced, self-assembly (EISA) process is shown to be a powerful and flexible method for synthesizing well-defined Janus thin films.